bing tracking image
  1. Trailer Hitch
  2. Subaru
  3. Forester
  4. 2008
  5. Draw-Tite
FITS 2008 Subaru Forester
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: 36311
In Stock
$196.75
Retail:$342.89
You Save: $146.14
Trailer Hitch
Confirmed to Fit
2008 Subaru Forester

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

The best technical support and full trailer hitch installation instructions. Great price Forester trailer hitch and expert service. Subaru Forester, 2008 trailer hitch by Draw-Tite are available from etrailer.com. For expert service call 1-800-940-8924 to order your Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36311, or order online at etrailer.com.
  • All Info
  • Reviews (233)
  • Q & A (0)
  • Photos

2008 Subaru Forester - Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

  • 1-1/4 Inch Hitch
  • Class II
  • 3500
  • Concealed Cross Tube
  • 300
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant Subaru Forester trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36311 Draw-Tite Class 2 Trailer Hitch Receiver

90757 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36311 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
300 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36311

Average Customer Rating:  4.8 out of 5 stars   (233 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

very easy to install and fits just right



by:

The product is top notch quailty and design. I love that the main unit doesn't protrude past the rear bumper. Hidden Hitch just like it's name. Directions were very accurate and easy to following. I would recommend this to all.



by:

The worst choice of hitchCompared to the OEM and Curt hitches, the Hidden hitch is crudely made by bending the square bar to pass over the tail pipe, and has a thin flat black spray finish rather than glossy powder coat.
I returned it to get a Curt hitch. But the OEM hitch is even better than the Curt, as it preserves the tie-down function, retains the better OEM muffler hanger, and includes a wiring harness with special grommet to come out of the spare tire well instead of hang over the bumper.



by:

Product is great. Service was exceptional. Thanks



by:

Wonderful experience from A-Z I am Hitched with this company ;)



by:
2004 SubaruForester

arrived as described and installed in less than an hour. very well done indeed!



by:

Product was exactly as described, delivery was quick (in fact, quicker than promised), and customer service was outstanding!



by:

Product seems excellent, the installation went exactly according to the video and was not difficult at all. Thanks.



by:

Very easy installation. It took me about 45 minutes to install by myself. Online video was extremely helpful.



by:
2014 SubaruForester

This product really is a 'hidden hitch'. It fits neatly under the forester with only the receiver showing. The entire process took about an hour on a 2002 S. The online video was very helpful and enabled my 14 year old son to do most of the work!



by:
1999 SubaruForester

Hitch was delivered ahead of schedule and took less than 50 minutes to install. Very neat installation.

99 Subaru Forester

Thanks!! Frank



by:

The draw-tite hitch went on in about an hour and 15 min, the bolts were a little rusty. The hitch showed up in good shape and in a timely matter.



by:

Great ProductWorks great and you can hardly see the hitch.

As indicated, it was a bit of work to install.

Looks better than the factory hitch and is a LOT cheaper.



by:

Surprisingly easy to install!The installation was pretty easy and the staff at etrailer was great to work with! They were very with me when I had a question about the installation. I would definitely do business with them again and the SHIPPING WAS FREE!
Thanks



by:

Online support sold me.Solidly built product. Easy to install. What sold me though was the "how to" online video. The video helped make the install a breeze. I was like I had done this countless times before. The muffler only had to be loosened, not lowered to get the hitch in place.



by:
SubaruForester

Beautiful hitchGreat hitch. Easy to install (having to drop the exhaust for my Forester was a bit of a hassle, though), good price, and great service and delivery through eTrailer.com. Would never buy a hitch from anywhere else.



by:

I dont know about the product yet because I have not installed it but the service from etrailer was great. The information provided on their site sealed the deal especially the video instruction. They also made good with their low price promise in a timely manner.



by:
SubaruForester

Excellent PurchaseI purchased this 2 years ago and used it when I borrowed a trailer from a friend. Installation instructions were great. Very please with this hitch. I have a Subaru Forester and the only part of teh hitch you see is the 1 1/4" receiver.



by:

THE WIRE HARNESS WAS INSTALLED IN SECONDS, THE HITCH WAS INSTALLED IN LESS TIME THAT WAS MENTION I AM SO GLAD FOR THE INTERNET OR I WOULD HAVE SPENT UPWARDS OF $600.00 WITH THE ITEMS IF I PURCHASED THEM LOCALLY. AND I GOT THEM IN A FEW DAYS OFTER ORDERING THEM!!!!!! SO THANK YOU KATE AND E-TRAILER EMPLOYEE'S AND I ALWAYS WILL DO BUSINESS WITH YOUR COMPANY!!!!!!!!!!!
THANKS TONY D. IN VERMONT USA



by:
2006 SubaruForester

Can't wait to tow something.Bought this for our 2006 Forester. Installation was a snap, took about 45 minutes (with air tools). Everything fit perfect. Also got the 4 pin wiring kit which was easy to install. Solidly built, nice looking and rated almost twice what the car is rated for so I'm looking forward to getting our tent trailer. Of course, now I have to learn how to back up a trailer...



by:
SubaruForester

The Draw-Tite hitch is robust, well designed, and easier to install than the one I purchased elsewhere for my previous Forester. The wiring harness was as easy as plugging in a mobile phone charger. It, too, seems very well made, with plenty of slack for adjusting the length of the harness for different length trailer harnesses. The purchase experience was quick and very easy! Thanks, etrailer!!



by:
2002 SubaruForester

Hitch was easy to install using only a hand socket set. I did apply WD40 to all bolts the day before and had no issue with frozen bolts. It does help to have a support and second set of hands to position the hitch in place. Hitch is sturdy and fits exactly into the Subaru bolt holes. Works very well with our bike rack.

Etrailer delivery was very quick...ordered Fri mid-day and had the hitch installed by Monday night. Have ordered several items from etrailer and all were delivered well-packaged and fast.



by:
2006 SubaruForester

Item 36311 installed on 2006 Subaru Forester: Exc experience. Etrailer communications were frequent throughout the process. Product delivered in very resonable time and was packaged well. Installation was simplified due to the excellent instructional video on etrailer website. The only additional tool needed was a torque wrench - which can be had at your local Walmart for 30 bucks. Hitch looks marvelous and only the receiver mount is visible. Overall a very pleasant experience. Quality product and great service. Will definately do business with this company again - and will recommend to my friends!



by:
2007 SubaruForester

Great product, easy install. Took more than hour for me, because I had my neighbors distracting me. All in told about an hour an half. I did discover one trick. We use the help of a floor jack to hold up the hitch as we put the bolts in. It was a big help with jack doing all the work of holding the hitch place.



by:

I went from zero hitches to exactly one hitch using this direct bolt-on Class-II hitch from etrailer!!!! Now I can rock my shins on it when I'm not paying attention and also tow things. If you want to tow stuff, 11 out of 10 people recommend having a hitch on the car to do so. eTrailer has these, and sells them to the general public. Buy one. Do it now.


25
236
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Where is Draw-Tite Trailer Hitch 36311 for a 2002 Subaru Forester Made
    The Draw-Tite hitch, part # 36311, for your Forester is made in Mexico.
    view full answer...
  • Trailer Hitch Recommendation 2005 Subaru Forester
    The only hitches we carry for your 2005 Subaru Forester are Class II like the Draw Tite hitch part # 36311. Class III hitches are usually reserved for higher capacity vehicles like SUVs and trucks. As long as you stay under the towing capacities of this hitch 3,500 total trailer weight and 300 lbs tongue weight this hitch would work just fine.
    view full answer...
  • Trailer Hitch and Wiring Recommendations/Comparisons for a 2006 Subaru Forester
    For the 2006 Subaru Forester there are only Class II hitches with 1-1/4 inch receivers available. The Draw-Tite hitch # 36311 and Curt hitch # C12038 are both rated for 3,500 pounds gross trailer weight. The Curt hitch is rated for 350 pounds tongue weight and the Draw-Tite is rated for 300 pounds tongue weight. These capacities are greater than what the vehicle is capable of though. According to the owner's manual if the trailer has brakes then the vehicle can tow 2,400 pounds gross...
    view full answer...
  • Recommendation For Trailer Hitch For 2003 Subaru Forester
    Both the Curt Class II Hitch, Item # C12038, and the Draw-Tite Class II Hitch, Item # 36311, are confirmed fits for your 2003 Subaru Forester. The Curt Hitch requires stabilizing straps to be used when using hitch for non-trailer loads like a bike rack. When stabilizing straps are not used, your warranty from Curt is voided. Draw-Tite hitches do not require stabilizing straps to be used on non-trailer loads. The Curt and Draw-Tite Hitches have the same maximum gross trailer weight of...
    view full answer...
  • Is There A 2" Trailer Hitch Available For A 2000 Subaru Forester To Carry E-Bikes?
    We do have 1-1/4" Class II hitches, like the Draw-Tite # 36311, available for a 2000 Subaru Forester, but there are not any Class III 2" receivers available, unfortunately. With that said, there are bike racks that can handle your 53 pound e-bike that will still fit a Class II 1-1/4". Not knowing what kind of rack you previously had, or still have, I can't say for sure if this is the case with your rack, but as an example, the Yakima HoldUp Bike Rack # Y02445 will have no issues fitting...
    view full answer...
  • Recommended Class II Trailer Hitch for Towing Small Utility Trailer w/ 2008 Subaru Forester
    The Curt Class II trailer hitch you referenced, part # C12038 has a 3500 lb towing/350 lb tongue weight capacity. If you'll only be using the hitch for towing a trailer, it should work just fine for you. However, if you're wanting to use the hitch as an attachment point for other hitch mounted accessories like a cargo carrier or a bike rack, it wouldn't be the best choice. Curt's warranty requirement state that all non-trailer loads need to use a stabilizing strap, like part # 18050. The...
    view full answer...
  • Which Vehicles Will Draw-Tite Trailer Hitch 75560 Fit
    Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Item # 75560 fits the following vehicles: 2008 - 2009 Subaru Legacy 2005 - 2007 Subaru Outback Sedan excluding Sport 2005 - 2009 Subaru Outback Wagon excluding Sport 2005 - 2007 Subaru Legacy Sedan 2005 - 2007 Subaru Legacy Wagon The hitch is not a fit for a 2005 Subaru Forester. It will take Draw-Tite hitch # 36311 or Curt hitch # C12038.
    view full answer...
  • Availability of 2 Inch Trailer Hitch for 2007 Subaru Forester
    We do have a couple trailer hitches available that are confirmed to fit your 2007 Subaru Forester, however they are all Class II models that feature a 1-1/4 inch receiver opening. There is not a 2 inch hitch receiver available for your vehicle. Trailer hitch manufacturers tend to design their hitches to closely match the capacity of the vehicles they are designed to fit on. Trailer hitches with larger 2 inch receiver openings will have higher weight capacities, which is likely why there...
    view full answer...
  • Can Hitch for 2003 Subaru Forester be Used as Recovery Point Since Tow Hook Gets Disconnected
    If you needed to use the Draw Tite hitch part # 36311 as a recovery point on your 2003 Subaru Forester since the tow hook has to come off you certainly could.
    view full answer...
  • Draw-Tite Class II Trailer Hitch for 2004 Subaru Forester
    For your Forester I recommend the Draw-Tite # 36311. This is a cost-effective option that offers fairly simple installation, includes all required installation hardware and needs no drilling. A complete install video is linked for you. If you also need a wiring harness I suggest the Tekonsha # 118461 which offers easy plug-in installation as shown in the other linked video.
    view full answer...
  • Trailer Hitch Recommendation for 2004 Subaru Forester
    I have a trailer hitch fit for your vehicle, but none of the trailer hitches that we offer for the 2004 Subaru Outback are listed as fits for the 2004 Subaru Forester. I do not think the hitch will fit your 2004 Forester. For a trailer hitch for your 2004 Forester I recommend the Draw-Tite Clas II Frame Receiver Hitch # 36311. This hitch will provide you with a 1-1/4 inch receiver and is great for light-duty towing. I have attached an installation video of this hitch for you.
    view full answer...
  • Hitch Recommendation for a 2006 Subaru Forester
    The only hitch size available for your 2006 Subaru Forester is a 1-1/4 inch hitch like the Draw Tite hitch part # 36311 that is a Class II hitch. 2 inch hitches are used on larger vehicles like SUVs and trucks. I attached a help article on hitch sizes for you to check out as well. You could use a hitch adapter like part # HTAD to convert the hitch opening to a 2 inch opening, but you should note that hitch adapters like this cut the capacity of the hitch in half. I attached a help article...
    view full answer...
  • Comparing Curt and Draw-Tite Class II Trailer Hitch Receivers For a 2006 Subaru Forester
    For the Curt Trailer Hitch Receiver # C12038 which fits your 2006 Subaru Forester, Curt no longer requires you to use the Cam Buckle Stabilizing Strap # 18050 with use on hitch mounted accessories. You will be able to use your class II bike rack with up to 350lbs of total weight on the Curt # C12038 or 300lbs on the Draw-Tite # 36311. These weight capacities are given from the manufacturer and I can not say exactly why one will be rated for a higher capacity than the other.
    view full answer...
  • Hitch Recommendation to Mount 2 Inch Hitch Accessories on 2004 Subaru Forester
    I may have a solution for you to have a 2 inch hitch receiver opening on your 2004 Subaru Forester. The only hitch available for your Forester is a Class II, 1-1/4 inch receiver hitch like the Draw-Tite Trailer Hitch, # 36311. I have attached an installation video for you to check out. Since there are no 2 inch hitches available for your Forester, you would need to use an adapter like part # HTAD to convert your 1-1/4 inch hitch receiver to a 2 inch receiver. The hitch pins and clips...
    view full answer...
  • Thule Hitching Post Bike Rack Recommendation for a 2005 Subaru Forrester
    Yes, as long as you have a hitch on your 2005 Subaru Forester like the Draw-Tite Trailer Hitch # 36311 then you definitely could use the Thule Hitching Post Bike Rack part # TH934XTR that you referenced on your vehicle. This is a great rack that I recommend a lot because its great value. It can carry 4 bikes, is compatible with 1-1/4 inch and 2 inch hitches, has anti-sway cradles to prevent the bikes from hitting each when loaded, can tilt for rear cargo access and has an anti-rattle hitch...
    view full answer...
  • 6 and 7-Way Trailer Connector Mount for a 2003 Subaru Forester Hitch
    I went out into our warehouse and measured the cross tubes of both the Curt # 12038 and the Draw Tite # 36311 and found that they have cross tubes that measure 2-1/2 inches by 1-1/2 inches. I would recommend you use a 6 and 7-Way Trailer Connector Mounting Box for Round or Square Tube Hitches, part # 18159, on either the # 12038 or the # 36311. I believe that this mount would give you easier access for your trailer connector once installed. I have included links to installation instructions...
    view full answer...
  • Trailer Hitch for Swagman XC2 Hitch Mount Bike Rack on 2003 Subaru Forester
    The Swagman XC 2-Bike Rack for 1-1/4" and 2" Trailer Hitches # S64650 is a great platform bike option for your 2003 Subaru Forester, so long as it is already equipped with a trailer hitch receiver, like the Draw-Tite Trailer Hitch Receiver # 36311, designed to fit the frame of your Forester. To use the bike rack, you do not need any extra parts. Everything you need to install it on a trailer hitch is included with part # S64650. The only time you'll need to use a ball mount, is for trailer...
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for 2007 Subaru Forester
    The best bike rack option for a vehicle is a hitch mounted bike rack as it provides the most secure attachment point and doesn't require lifting the vehicle up and down off of the roof. It also keep the bike out of the wind unlike a roof rack option. So for a hitch for the 2007 Subaru Forester the Draw Tite part # 36311 is the way to go as it does not require the use of a stabilizer strap like the Curt does with bike racks. I really like the Saris Freedom Superclamp part # SA4025F. This...
    view full answer...
  • Does the Carbon Canister have to be Removed to Install a Trailer Hitch on a 2005 Subaru Forester
    When installing Draw-Tite trailer hitch # 36311 on a 2005 Subaru Forester you will sandwich the carbon canister bracket between the hitch and the vehicle frame. You will not put the canister on after installing the hitch. I have included a link to the instructions. Step 5 mentions sandwiching the bracket between hitch and frame. I have also included a link to a video showing a typical installation for you.
    view full answer...
  • Subaru 2003 Forester Hitch Installation and Platform Style 4-Bike Rack Recommendation
    It's not necessary to use a lift to install a hitch on your Forester, but if you have or can borrow ramps or jack stands from somebody, it will make the installation much easier. If that's not an option, we offer some fairly inexpensive ramps as part # FT11909MI or jack stands as part # PTW41021. Either the Curt # C12038 or the Draw-Tite # 36311 would work fine for you. They install in the same manner, and have identical capacities. Both install with standard metric wrenches or sockets...
    view full answer...
  • Can I use Class II Draw-Tite Trailer Hitch on a 2003 Subaru Forester to Carry a Bike Rack
    Yes, the Draw-Tite hitch 36311 will fit your 2003 Subaru Forester and can carry a bike rack. This hitch is a Class II 1-1/4 inch hitch, so make sure the carrier you want to use is built for a 1-1/4 inch hitch. I have added a link below to a page that has all the bike racks we carry that will fit a Class II 1-1/4 hitch.
    view full answer...
  • What Bike Racks will Fit a 2001 Subaru Forrester Class II 1-1/4 Inch Hitch
    There are not any 1 bike racks out there, the smallest racks are 2 bike. However, below you will find a link to all of the bike racks we have that will fit a Class II 1-1/4 inch hitch. You can use the filters on the left hand side, or the recommended criteria at the top to help you find the rack that will best suit your needs.
    view full answer...
  • Hitch Recommendation for 2008 Forester to Carry a RockyMounts MonoRail
    The RockyMounts MonoRail 2 bike rack # RKY10003 will fit the Draw Tite hitch part # 36311 that is a confirmed fit for your 2008 Subaru Forester. It also fits the Curt # C12038 which fits too, but since the Draw Tite doesn't require a stabilizer strap like the Curt does it's the way to go.
    view full answer...
  • Trailer Hitch and Hitch Adapter Recommendation for 2008 Subaru Forester to Carry Bike Rack
    I have a solution for you, but we do not offer any trailer hitches with a 2 inch hitch receiver for your 2008 Subaru Forester. All of the trailer hitches we offer for your vehicle are Class II trailer hitches with 1-1/4 inch receivers. The only way to carry your bike rack with a 2 inch shank is to use a hitch adapter. The downside to using an adapter is that it will reduce the tongue weight capacity of your trailer hitch by 50 percent. The trailer hitch I recommend for your Forester...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Randy B
Test Fit:
Randy B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924