To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant Nissan Rogue trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling through vehicle frame required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Underbody trim panel must be modified or trimmed if present
California residents: click here
Easiest install ever! Even the wiring install went smoothly. Satisfied customer.
I ordered a trailer hitch and wiring for my 2016 Nissan Rogue. I received very great and fast service and the video instructional on the web site was fantastic! I would recommend etrailer to anyone that is planning to install a trailer hitch on their vehicle.
A very easy and straight forward installation procedure, after removing underside splash panels on my Nissan Rogue it took 20 minutes to install and torque the trailer hitch bolts to specification.
The wiring harness took about and hour and a half due to removing trim panels in order to properly route the auxiliary power cable from under the hood to the rear of the vehicle.
All said and done it looks great and performs as advertised.
Had Hitch installed in less than 1 hour. Took longer to reinstall splash guard's. We need to install wire kit yet. Your Video's we very helpful on the install. Thanks
Michael G.
6/27/2022
Your products and customer service is way above others. Will use again. Thanks
The hitch receiver is working good in my 2017 nissan rogue even that I didn’t buy the correct one, I didn’t now there was a small 1/4 hitch receiver but I bought a 1/4 to 2” adapter and is working fine, I use it for my Kuat NV 2.0 with to mountain bikes and is doing the job great. Thank you for having great products.
It mostly fits, went on easy and works. I did use a few washers to space it down so it wouldn't push so hard on the sheetmetal in the center. The instructions say to discard a plastic splash guard that will be in the way but I trimmed the plastic with tin snips and put it back on, I think that is better. It bolts into factory provided threaded holes.
Too bad they don't galvanize hitches before they paint them, although it is holding up better than most here in the peak of the rust belt. I would pay more if it was available in stainless steel.
Mounting holes on Hitch did not match the holes on the frame of my 2017 Rogue. I loosened, wiggled, pulled, tugged, stretched and leaned on the hitch and this was as close as I could get. See attached photo.
I will have to have my mechanic bend the hitch mounting plate so that we can secure the other two mounting bolts on the driver's side. That will likely cost more than the price I paid for the hitch.
Hitch was well painted, heavy and seemed to otherwise be a quality product.
Fits perfect and was shipped fast. Looks nice on my 2016 rouge you barley can tell it's there. I went to YouTube and watched the install video before I put it on and I had no issues. I'm gonna be pulling a 6x8 trailer with it for my kayak. I also bought and installed the plug and play wiring kit. The wiring was not that hard after I watched the YouTube video.
fits but takes modifications to install Had to cut and bend bumper cover support and left mud guard
I was having a tough week so I was looking for an easy project. Decided to install the trailer hitch. It went on great! Thank you for quick delivery of a quality product at a fair price. Any one want to join me in a bike ride?
ps the video was helpful, especially the part about cleaning rust from the driver side threads.
Here is a picture of the hitch receiver and the electrical plug. My installer decided to keep the plug near the hitch and not in the car when not in use.
Less than two hours start to finish, it does accept bike rack, third purchase quick delivery and install videos are best example of outstanding customer service.
All is well. The delivery came very quickly - free 2 day shipment! What more could we ask for?
The box was a little banged up, but the hitch looks ok.
Perfect fit great quality easy install.Had some rust in the bolt threads and follawed the YouTube vidio on how to tap the bolt holes in the frame and it worked out easily.
Dennis C.
7/6/2019
great
Only complaint on the passenger side of the vehicle (2017 Rogue S) there are only 2 existing threaded holes in the frame not three like in the vid. Also 5 bolts sent, one left over. Here's a pic, the bottom of the pic is the rear of the vehicle passenger side.
This hitch was a piece of cake to install on my 2017 Nissan Rouge. It fit perfectly. It took me about 45 mins to install which included putting the shield pieces back on.
A past purchase from etrailer.com provided me with confidence in making another purchase. The on-line help videos were excellent. I ran into a slight problem during installation due to the sheet-metal plate behind the rear bumper cover on my 2015 Nissan Rouge. At first I thought I was a problem with this product. I was able to push the metal bumper plate outboard a bit therefore allowing the hitch to seat properly. Installation was a breeze. I was also able to re-install the rear passenger appearance panel and make a slight modification to the driver side panel that was required to be removed for installation. This product looks great, I can’t wait to attach my bike carrier!.
My only negative would be that etrailer.com should add some reinforcement (tape & heavy cardboard) to the ends of the hitch brackets to keep from ripping through the box. I just applied spray paint to any areas of the hitch that the paint rubbed off during transport.
Jay B.
6/17/2015
Hi Bob. Do you have the SV or the SL?Thanks,Jay B.
Anonymous
6/23/2015
I have the SL model.
Received the trailer hitch and installed it on a 2015 Nissan Rogue. The hitch fits perfectly and it only took me about 45 minutes for the installation. It's a great addition to the vehicle.
The only concern is that the box was torn in several places from shipping via UPS.
Bill B.
4/29/2018
The hitch is working exactly as expected. Im still pleased with this product.
The is a wonderful trailer hitch for our Rogue. Very nice quality and finish. Plus the hardware is included. Installation was pretty straight forward and for a DIY'er, I was able to do it in about 75 minutes. I didn't need to remove the exhaust like the video shows as I could maneuver the hitch in place and then, with an extra set of hands, secure a couple bolts before tightening all the way.
Brant
7/15/2021
Still working well. The second one we bought was for our Nissan and the original one I bought was for a VW. Both are still in great shape, especially with MN road conditions and the weather.
Hitch installed EXACTLY like shown. I was able to get it installed without jacking the car up or removing the muffler and by myself. Placed hitch on passenger side up close and on a jack stand and then raised up the drivers side and started a 2 of the bolts. Moved to the passenger side - installed all bolts loosely and then snugged them up as directed. Hitch looks great!
Tim A.
8/21/2017
Works great!
I bought a trailer hitch and wiring for my 2013 Nissan Rogue. The hitch went on in a minute, the wiring a little longer but the video was a tremendous help. No issues here and free shipping is a big plus.
Gary
9/28/2015
I use the trailer hitch to tow my 16 boat around the northwest to fish for salmon and other fish. The dealer wanted almost $600 to install a hitch and lights. I did it for about $200. the products are well made and meet all industry standards, the instructions were easy enough to follow. I would buy these again. the only regret is that I bought the small size receiver on the hitch. I strongly recommend others to buy the 2 receiver as it will all the accessories that the small one will not..
tow hitch and wire harness for 2016 roque. Installed the hitch in about 20 minutes on my own, wire harness about an hour, check out installation video, excellent product. i would recommend it to a friend.
Bryn D.
2/20/2018
excellent product, would purchase again.
We bought Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" for our new Nissan Rouge. We are so happy with this purchase. This a exactly what we need to use our trailer.
Thanks a lot.
Natalya S.
12/11/2017
Still happy. Thanks.
The video was very helpful in guiding me through the installation. The only problem I encountered was that the bolt pattern on the hitch did not perfectly align with the threaded holes in the frame of my 2017 Nissan Rogue. I was able to secure each of the two bolts on the passenger side, but only 2 of 3 bolts on the drivers side. Redrilling the last hole was not an option because the alignment was too far off. I do not believe the poor alignment for the last hole was a manufacturing defect, as others have not experienced this problem. I believe the issue may have been caused by a minor collision with the vehicle’s previous owner. I went forward with the installation despite my inability to fasten the final bolt because I only plan to haul a bike rack and I believe the 4 securely fastened bolts will be adequate. If I planned to haul something heavier such as a boat, I would not have proceeded with the installation. Overall I am happy that I was able to finish the job because I was impressed with the quality of the product. Even though the video advises that restoring the plastic panels (previously removed to create space for the installation) was not necessary, I decided to return them to place because they protect the undercarriage from road debris. Some of the fasteners were too damaged to be reused; I secured them with zip ties. I used tin shears to trim some plastic off the drivers side panel to make it fit around the hitch better. Very pleased with the finished product.
Jenny N.
6/22/2022
You mentioned that not all the holes were lining with the frame of the Nissan. I believe that the side brackets were knocked out of alignment which is why the bolt holes are not lining up. This can happen while in transit to our facility or to you. We do have a great FAQ that provides ways to move the brackets back into alignment so the hitch can be installed.
Helpful Links
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Charles
4/3/2019
Excellent!