bing tracking image
  1. Trailer Hitch
  2. Nissan
  3. Rogue
  4. 2010
  5. etrailer
FITS 2010 Nissan Rogue
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
etrailer

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

Part Number: e98846
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$175.25
Trailer Hitch
Confirmed to Fit
2010 Nissan Rogue

excluding Krom

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 1-800-940-8924 for expert service. We are your Nissan trailer hitch experts, and offer a great price. etrailer.com carries a complete line of etrailer products for your Nissan Rogue 2010. etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" part e98846 from etrailer can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (1049)
  • Q & A (0)
  • Photos

2010 Nissan Rogue - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 3500
  • Concealed Cross Tube
  • 525
  • etrailer
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Nissan Rogue's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer
  • Matte black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty


Rugged, Matte Black Finish

The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.


Matte Carbide Finish vs Glossy Finish

Matte Carbide Finish vs Glossy Finish

etrailer Technical Support

At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



e98846 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide

Installation Details E98846 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
525 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Underbody trim panel must be modified or trimmed if present





Customer Satisfaction Score:


Customer Reviews

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98846

Average Customer Rating:  4.8 out of 5 stars   (1049 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.

by: 06/28/2023

Quality product that appears to be well-made.
Shipping
container could have been more sturdy (it busted through the box in three places).
Install instructions were simple but helpful (socket sizes to remove the tow hook bolts and install the tow hitch, extension, how to remove the plastic retainers).
Install was very easy and I didn't need to unhook the exhaust as suggested by the instructions. Only a small amount of trimming was necessary for the rock guard to fit around the hitch.

Leo profile picture

Leo

6/29/2024

No issues one year on, still performing as expected, though I only use it for a bike rack.



by:

For the most part I am very happy with this wiring kit. Assembly was easy and everything fit perfectly. However, I didn’t run the hot wire (black) to the battery. That would have made the installation much more difficult. I simply spliced in a 12 volt plug. When I use the trailer I just plug it into the receptacle in the rear of the car. I attached 2 photos of my hot lead. This option works great.



by:

Installed on 2018 Rogue. Easy install. Works well for my intended purposes. I use it for storage and transportation racks. It is a little off center, but I don't use it for towing.

Jr profile picture

Jr

10/6/2023

Still holding strong after 1 years use.

MikeL profile picture
Etrailer Expert

Mike L.

10/21/2023

@Jr We're glad to hear that! What do you use the # e98846 hitch for?


by:
2016 NissanRogue

Straight ford easy to install. Looks great. But no mention of when reinstalling the side Panel, you have to cut it to get it to fit back in.But I am good with that.



by:

We have put the trailer hitch to good use since we got it. Right away, we rented a large flatbed trailer from uhaul to move 4 hours to our new home. We've also rented other trailers to move furniture we purchased, appliances, etc. The trailer hitch was easy to install, very easy try put on and take off and it is extremely durable. Zero complaints!



by:
NissanRogue

I ordered this for our Nissan Rogue. Super easy install and a perfect fit.

Chad profile picture

Chad

9/10/2024

Looks and functions like the day I installed it! Ill be coming back to eTrailer for any hitch needs that I have in the future.



by:
2016 NissanRogue

63 years old. I have finally found the first project in my life that actually went as easy at it should have! The accompanying videos were spot on. Ran the back end up on ramps. Secured the front wheel. No need to drop muffler. Done in less than 30 minutes. Still can’t believe it was this easy of an install.

Pete profile picture

Pete

6/25/2024

After a year of use I am happy to say the hitch is as solid today as the day I installed it!



by:

Sturdy hitch. We connected a bike rack to it and it hold very well. We are connecting a pop camper this summer and we will see how it holds. If I don't come back here for a second review, that means I stand by my initial review.



by:
2016 NissanRogue

The parts look great and fits the car perfectly. Had a test drive with a 2 bicycle rack mounted and it was perfect. The package was damaged in some areas upon delivery and some color damage was showing at 2 spots (minor). The installation video was very helpful and made the installation an easy job

Golan profile picture

Golan

4/14/2024

Working flawlessly for the past year!

BudM profile picture
Etrailer Expert

Bud M.

5/13/2024

@Golan Great to hear. Thank you for the update.


by:

Shipping isn't the greatest. I understand that it is a 40ish pound metal, but packaging could be better. Returned the 1st one sent and got another one, but even then there was another hole in the package.

Customer service was quick to send me another one and I loved how quick it was.

Currently live in AZ so chipping in the paint doesn't matter since there isn't a big rust issue. But will be moving to WI soon and some places still use salt. Don't want rusting already.

Saw some minor paint chipped areas on the 2nd one sent. Not as bad as the first one sent.

Not sure why they used a 19mm for the new bolts. Was annoyed that the old ones was 18mm and then swapped to 19mm.

Easy installation. Forgot the name of the piece but think it was a elbow socket, so I didn't even need to waste my time taking off the exhaust.

Had some left over green spray paint so I used that to spray over the chipped areas instead of wasting $ on black paint.

Overall, not sure if I would go with etrailer again for my trailer needs. Loved how fast customer service worked to resolve my issue. Packaging needs to be better. It's a hitch receiver, a piece of metal... not much to say about it except I hope the ugly spray job prevents rust! I mean it will rust eventually, just don't want the life span of it to be less.



by:

2018 Nissan Rogue (not the Sport model). Perfect fit. Hidden well. Will order again from etrailer for my next car.

I use a longer ball mount to ensure trailer clears the bumper. For the electrical I purchased the Nissan wiring harness and cut the end off instead of going through the floor of the car (not a good idea in my opinion). Instead I used the connector portion that came from etrailer and hang it out the hatch when needed (also avoids the weather wear).

Ed profile picture

Ed

3/24/2021

Perfect. Ive used it several times pulling a 5x8 trailer. Still 5 stars!



by:
2019 NissanRogue

Excellent product; fit my 2019 Rogue exactly as described in the very helpful video; had no problem installing the hitch which took about 30 minutes (the holes lined up perfectly and I didn't even have to jack up the car or put it on a lift); especially satisfied with the expeditious delivery which took about 4 days. I plan to use it with the Swagman XC 2-bike rack platform style that I ordered from etrailer to carry my wife's and my bikes on vacation trips.

Peter P. profile picture

Peter P.

8/9/2020

Works out great. Im very satisfied with both the receiver &amp the rack.



by:

My overall assessment of the product is that it meets the basic requirements, but there are some notable issues with its packaging and alignment. Like others have pointed out, the packaging was insufficient considering the weight of the product, leading to concerns about its integrity during shipping. Additionally, there was an alignment issue with the third bolt hole on the driver's side, which was not mentioned in the installation videos on etrailer.com. While the website suggests bending and flexing the product to address this, I believe such modifications shouldn't be expected from customers, and it reflects poorly on etrailer's quality control.

Given these concerns, I'll primarily be using the product for lighter applications like a bike rack or cargo rack. However, I'm apprehensive about the reliability of the third bolt. If I happen to be in the vicinity of etrailer in St. Louis, I might consider visiting them to rectify the issue. Other than this, I was happy with the process and the product.



by:

The hitch was very easy to install! However, I could only get 4 of the 5 bolts to work. The fifth bolt hole (driver side closest to the front) half covered the hole in the frame.). I only bought it to haul our bicycles so this should be fine but I wouldn’t try it under full load.



by:

Excuse the dark picture but I installed the hitch by myself as soon as I got home when I saw that it had been delivered. Hitch receiver is very well made and high quality. Everything aligned perfectly and it looks awesome installed. The only thing visible is the receiver tube. Absolutely cannot beat this hitch for the price. Thank you etrailer!

Kenny V. profile picture

Kenny V.

5/6/2022

Its been a year and everything that I said previously still stands. I use my hitch every weekend and it has held up to everything.



by:
2012 NissanRogue

The trailer hitch receiver for my 2012 Rogue was easy to install. We did not need to drop the muffler. The holes lined up perfectly. The only problem we had was removing the rust from the exposed weld nuts to attach the hardware on the driver's side.
Fast Delivery- received it before expected

Sierra K. profile picture
Etrailer Expert

Sierra K.

7/20/2021

Thank you for your review. Here are some helpful tips for cleaning weld nuts:



by:

Looks nice feels solid and installs simply. This hitch is exactly what I needed for the bike carrier I use and couldn’t be happier. Installed on my 2008 Nissan Rogue with my only troubles being the rogues frame being a little crusty making the bolts tough to screw in on the left side. Nothing brute strength and spray lube couldn’t handle though. Did not need to move the exhaust or modify anything as it fit perfectly.

Joe profile picture

Joe

7/11/2020

Fantastic. Absolutely no issues



by:

Fairly easy to install, even for a 64 year, like me. Just had a little trouble with the bolt holes being rusty on drivers' side and passenger side had a plate I had to remove.



by:

Hitch working great. Pull my trailer and teardrop camper with it. Was easy to install. If you need a hitch check out these guys

Jimmy profile picture

Jimmy

1/1/2022

Works great with both of my trailers



by:

Perfect fit didn't have to remove anything on the car just 5 bolts and i was ready to go. Also best price online and exceptional quality. This is the 2nd hitch i have purchased from etrailer for different cars and will be coming back if need anymore.



by:
Volvo Cross Country

Good value for the money. Sturdy, came with appropriate hardware, and easy to install. If you have high usage, I suggest something higher end. I use it a couple times a month it works great for me. I've used it cross country and worked great, although the fold up parts are very basic and not meant for frequent folding and unfolding. (In my opinion)



by:

If it weren’t for careless shipping (or maybe substandard packaging) I’d be much happier! There were four places where the Diana’ finish was scratched down to bare metal. This means, before I can even install it, I’m going to have to paint it so it doesn’t rust in those places. I’m stunned that there was so little packaging or protection besides the outer cardboard box and two, thin wrappings around the frame. The hitch may function great…after $7.50 in paint and an hour of my time.



by:
NissanRogue

The etrailer hitch is a great looking, sturdy hitch that is simple to install. I backed up our Rogue onto oil change ramps to give myself a little more room to work, but even that is not entirely necessary. The only problem was a defective factory weld nut on the passenger side (not the hitch's fault) that made it a bear to remove one of the bolts for the factory tow plate and install the new bolt for the hitch. But with some effort and a long enough ratchet, we can now carry our bikes.

A couple installation tips:
- You'll need a 5" or longer socket extension to reach the bolts, especially on the passenger side.
- You don't have to lower the exhaust.
- Despite what the instructions say, you CAN replace the appearance panels. (Not required, but I hate having extra parts when I'm done.) The passenger-side panel is easy to reinstall.
- The driver's side appearance panel needs to have a rectangle cut out of it to fit around the hitch, 3 3/8" wide starting 3" up from the bottom of the flat part, with a small triangular notch in the corner. (See photo.) You can cut the plastic with a sturdy pair of kitchen shears. You'll need to work it a little bit to get around the exhaust pipe, but then just clip it back into place.



by:

I use the hitch for a bike rack, and so far it has worked great without any issues or problems or becoming loose.



by:

The product arrived on time and fit my car perfectly. The installation video was also very helpful. I have also attached a bike rack to it without any issues. I will say I had one slight problem that I read in some of the other reviews. I had to trim the plastic underbody cover on the drivers side near the exhaust. It is the only way it will fit with the hitch attached.


25
1049
Show More Reviews

See what our Experts say about this etrailer Trailer Hitch

  • Will etrailer Trailer Hitch Receiver Fit 2019 Nissan Rogue Sport
    The # e98846 hitch you were looking at is designed to fit the 2019 Nissan Rogue. For the 2019 Nissan Rogue Sport you would need the # e79YR instead. This has the same capacity, bolt-on installation, and a 2" receiver. The only difference is the design to fit the Sport model. If you plan on towing, you will also need wiring and a ball mount. The Curt T-Connector Vehicle Wiring Harness # C56397 plugs into the connection points in your rear cargo area. This will provide you with a 4-way...
    view full answer...
  • What Trailer Hitch For 2019 Nissan Rogue to Carry Scooter
    Hi Lynita, For a trailer hitch that fits your 2019 Nissan Rogue and doesn't require any type of drilling into your frame, use the following: - etrailer Trailer Hitch Receiver # e98846 The # e98846 has a 500 lb tongue weight capacity, which is more than enough capacity to hold a 200 lb chair and its carrier. For example, if you used the 101 lb Reese Steel Solo Cargo Carrier and Folding Ramp # PS10401-10402 and added the 200 lb power chair you'd be at 301 lbs, well below the 500 lb capacity...
    view full answer...
  • Trailer Hitch for 2020 Nissan Rogue to Carry Kuat NV 2.0 Bike Rack
    The etrailer hitch part # e98846 that you referenced would be a great hitch choice for your 2020 Nissan Rogue to carry a Kuat NV 2.0 bike rack part # NV22G. The etrailer hitch is mostly hidden since only the hitch hangs below the rear bumper and has the highest tongue weight rating which is why I recommended it.
    view full answer...
  • Trailer Hitch Recommendation for 2017 Nissan Rogue
    The etrailer hitch part # e98846 would be a great option for your 2017 Nissan Rogue as it's mostly hidden and has plenty of towing capacity. Like all of the hitches that fit your vehicle there will be some fascia trimming needed and the panels will have to be removed temporarily for install which is standard for hitch installs on your vehicle as well as others. I attached an install video for this hitch on a similar 2017 Nissan Rogue. For trailer wiring then the Tekonsha kit part # 118480...
    view full answer...
  • etrailer Trailer Hitch Receiver # e98846 Driver's Side Mounting Bracket Clearance of Exhaust Hanger
    The etrailer Trailer Hitch Receiver # e98846 will have a larger notch for the exhaust hanger on your 2011 Nissan Rogue that is coming into contact on your Draw-Tite Hitch # 75902. I felt that the best way to show you is with a picture that I have included of the etrailer hitch installed on the Nissan Rogue. You can see where the bolt hole is in relationship to the notch in the receiver for the exhaust mount. This will help you to see if the exhaust hanger on your Rogue will interfere...
    view full answer...
    Image 1 for Image 2 for
  • Class III Trailer Hitch and Wiring for 2018 Nissan Rogue
    We do have a towing set up, including a Class III, 2 inch trailer hitch receiver that will fit your 2018 Nissan Rogue. Let's start with the trailer hitch, and the best option for your Rogue is the etrailer Trailer Hitch Receiver # e98846. This hitch has the best capacities, is a complete bolt-on installation, and a rugged matte black finish that is going to hide the inevitable nicks or scratches better than the glossier finish of the other hitches that fit your Rogue. Along with the...
    view full answer...
  • Will A Hitch Mounted Cargo Carrier Affect The Rear Automatic Braking System On A 2019 Nissan Rogue?
    Yes, we have had issues in the past with trailer hitches and accessories affecting the Rear Automatic Braking system on the 2019 Nissan Rogue. Basically it will detect the hitch and carrier and may cause the brakes to activate while you are backing up. We have not found a work around as of yet. Your best bet would be to contact a Nissan Dealership to see if they know of a way to bypass or deactivate this sensor.
    view full answer...
  • Torque Specifications for Installing etrailer Receiver Hitch e98846 on 2015 Nissan Rogue
    The Torque Specification is found in the installation instructions on our product page on the etrailer # e98846 receiver hitch. A Torque Wrench # PT87ZR would be the type that you would need to achieve that rating.
    view full answer...
  • Recommended Bike Rack for 2018 Nissan Rogue
    While there are options for your 2018 Nissan Rogue, the Hollywood Racks Over-the-Top 2 Bike Carrier for Vehicles w/ Spoilers # HRF2 is not a confirmed fit. The Nissan Rogue got a facelift in 2017 that made it hard to put trunk mounted bike racks on it. The biggest fitting issue comes how the rear bumper is designed. The only relatively affordable trunk mounted option for your vehicle is the SeaSucker Hornet Vacuum Cup Mounted Bike Rack # 298-BH1302. It attaches to the rear window and can...
    view full answer...
  • Recommended Class III Trailer Hitch for 2018 Nissan Rogue That Doesn't Require Lowering Exhaust
    The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98846 does not require the exhaust to be lowered during installation, so it's exactly what you're looking for. I really like the matte black finish on this hitch, so it's going to do a great job of hiding nicks/scratches and dirt, and this is a Class III hitch with a 2" receiver like you're seeking. I've linked an installation video of this hitch for you to check out that details the process. I've...
    view full answer...
  • Trailer Hitch Receiver For a 2016 Nissan Rogue
    The Curt Trailer Hitch Receiver # C13902 is a multi fit hitch that is not designed for one particular vehicle but will fit on several models with some drilling. This particular hitch is for Chevrolet, Ford and Dodge Trucks. I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2016 Nissan Rogue. This hitch is custom fit to bolt to into the factory weld nuts that are on your Rogue. This hitch is rated for 525lbs of tongue weight and 3,500lbs or trailer weight. Be sure to check...
    view full answer...
  • Will etrailer Trailer Hitch Receiver e93ZR Work With Lift Gate Sensor On 2021 Nissan Rogue SL?
    I would be happy to help! A trailer hitch receiver like the etrailer Trailer Hitch Receiver # e93ZR will partially block the rear lift gate sensor on your 2021 Nissan Rogue SL but it will still work by placing your foot on either side of the receiver. You will want to move your foot in and out until you find the sweet spot for the sensor. I recommend going with the # e93ZR due to it having a nice matte black powder coat finish that will blend in nicely black trim on your vehicle, and...
    view full answer...
  • Recommended Trailer Hitch for Use with Cargo Carrier on 2017 Nissan Rogue
    If you are looking for a trailer hitch for your 2017 Nissan Rogue, I recommend our etrailer Trailer Hitch Receiver # e98846. This is a Class III trailer hitch that has a 3,500 lbs towing capacity and 525 lbs tongue weight capacity, which is more than enough for a hitch-mounted cargo carrier to carry an electric scooter. You should also verify the towing and tongue weight capacities of your vehicle, which is usually listed in the owner's manual. If your vehicle weight capacity is lower,...
    view full answer...
  • Trailer Hitch Receiver, Wiring, and Ball Mount For Towing a U-Haul Trailer With a 2018 Nissan Rogue
    I recommend the etrailer Trailer Hitch Receiver # e98846 for your 2018 Nissan Rogue. This receiver is rated for 525lbs of tongue weight and 3,500lbs of total trailer weight. Be sure to verify your maximum towing capacity with your Nissan dealer. The etrailer Ball Mount Kit # 989900 will provide you will 2 ball mounts and a 2" or 1-7/8" ball. Either ball will fit the U-haul trailer you intend to haul but the ball mounts have different amounts of rise(1"or3") to allow you to best level...
    view full answer...
  • Is there a Hitch for a 2019 Nissan Rogue Special Edition?
    Yes, the etrailer Trailer Hitch Receiver item # e98846 fits all models of the 2019 Nissan Rogue including the special edition. This hitch is custom fit and bolts directly to your frame with included hardware. It installs in preexisting holes and does not require any drilling or welding. I have linked an installation video and attached a picture below so you can follow along with the process and see the final product. If you need a wiring harness to control your trailer or accessories...
    view full answer...
    Image 1 for
  • What size Bolts Are Used For the etrailer Receiver On My 2012 Nissan Rogue?
    According to the instructions that I have linked below the 5 bolts used are M12-1.25 x 35mm for the etrailer Trailer Hitch Receiver # e98846.
    view full answer...
  • Trailer Hitch Receiver For a 2020 Nissan Rogue That Will Not Interfere With Hands Free Lift Gate
    The etrailer Trailer Hitch Receiver # e98846 should not interfere with the operation of your foot activated lift gate on your 2020 Nissan Rogue. You will need to position your foot very close to the trailer hitch on the rear of your Rogue to get the sensor to detect your foot. I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness # HM11143645 to allow for you to tow with a trailer or to use any auxiliary lights in case your bike rack/cargo carrier block your taillights.
    view full answer...
  • Best Trailer Hitch for Bike Rack On a 2018 Nissan Rogue
    The etrailer Trailer Hitch Receiver part # e98846 is what I recommend using to install a bike rack like the Swagman Trailhead 4 Bike Rack part # S63380 on a 2018 Nissan Rogue. The etrailer hitch has a hidden design and matte finish for a clean finished install look and it offers bolt-on installation.
    view full answer...
  • Recommended Trailer Hitch and Trailer Wiring Harness
    For a hitch, I'd recommend the etrailer brand # e98846. The hitch itself is manufactured in the USA, and has a 525 lb tongue weight/3500 lb towing capacity. Per the owner's manual, the vehicle's towing capacity is limited to 1100 lbs towing/110 lbs tongue weight. For a trailer wiring harness, I prefer the Tekonsha # 118480 over the Curt # C56033 you'd looked at . You'll also need a # 2753 ball mount which includes the hitch pin, and either a 1-7/8 inch trailer ball, part # 19260 or a 2...
    view full answer...
  • Are there Any Non-Hitch Mounted Bike Racks for a 2017 Nissan Rogue
    If you're just after a bike rack, then you can use the SeaSucker Komodo Bike Rack for 1 Bike # 298-BK1910-BK which will use vacuum cups and does not require a hitch. But, be aware that this bike rack can only hold one bike weighing 45 lbs, so if you're carrying more than one bike, or a heavier bike you'd need to install a hitch # e98846 and use a hitch mounted bike rack # HLY84FR.
    view full answer...
  • Will Trunk Mount Bike Rack Fit a 2014 Nissan Rogue SL
    I do have a way that you can travel with 2 bikes but unfortunately there are no trunk mount bike racks that fit your 2014 Nissan Rogue SL. Instead you'll either have to use a roof mount bike rack or have a trailer hitch installed and use a hitch mount bike rack. For a roof mount option I recommend the SeaSucker Mini Bomber Roof 2 Bike Rack # 298-BM2006 because it combines a roof rack with a bike rack. This means that it can easily be transferred to another vehicle down the road if the...
    view full answer...
  • Bike Rack Recommendation for 2013 Nissan Rogue with Spoiler
    We have great bike rack solutions for your 2013 Nissan Rogue that has a spoiler but they are hitch mounted options as we do not have any trunk mounted racks that fit your vehicle due to the spoiler. So you'd need a hitch installed like the part # e98846 so that you can then carry a bike rack like the Hollywood Racks Trail Rider # HR200Z and you'd be set. I attached an install video for the hitch and a review video for the bike rack for you to check out.
    view full answer...
  • How to Install Trailer Hitch on Vehicle that is Missing Weld Nuts in Trailer Frame
    What you can do is use a bolt leader like # 80101-1 with a carriage bolt block through an open portion of your frame to basically act as a weld nut so you can install the hitch. This normally is a solution we use when a vehicle has a broken weld nut and we have to come up with a way to install the hitch. We made a video on how to do this which I have attached to this page. Best option will be to source a carriage bolt (it will have square shoulders under the head of the bolt) the correct...
    view full answer...
    Image 1 for
  • Will The etrailer Class 3 Hitch e98846 Fit A 2013 Nissan Rogue
    Hello Jackie; yes, the etrailer Class 3 Hitch # e98846 will indeed fit the 2013 Nissan Rogue. We have installed this hitch on a 2013 Rogue here at our shop in Missouri, so we know it will fit. I have provided a link to our install video for you below.
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Michael B
Video by:
Michael B
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video Edited:
Jonathan Y
Employee Wilson B
Updated by:
Wilson B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Kristina F
Written by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924