To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This fully welded trailer hitch receiver bolts onto your Nissan Murano's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Tie-down bracket will need to be removed for the hitch installation. No drilling through vehicle frame required for installation , Exhaust must be temporarily lowered for installation
California residents: click here
Great customer service
E trailer is the best! Using them for y ears
One year later, hitch is working great on my 2013 nissan murano.
Nice looking and very easy install!
My only suggestion is, do you research on videos on proper installation?
Wonderful hitch. Never had an issue with it!
I tried to drop the exhaust but it was more difficult than it looked (even with some WD-40 to lube the rubber connectors), so I decided to try installing without doing that. I got a 12x1.25 tap and it was well worth it--far easier to clean out the 12mm bolt holes with that than with one of the bolts (I tried both). Without dropping the exhaust it was a little challenging to get the tap lined up and turned all the way in--it's a pretty tight space. Then it is a two-person job to get the receiver bar in place--one person to hold one end while you hold the other and get one bolt in finger tight, then go to the other side and do the same. The receiver bar was just a little narrow--had to flex it a little to get the last bolt in. I did put the car up on jack stands to have more room to work. Really flexible folks might be able to do it without that. Torque the 12mm bolts to 83 ft./lb., the smaller bolt to 23 ft./lb., and you're done. Way cheaper than paying to have someone else do it.
Great hitch. heavy duty and a nice powder coated. In my case the directions state to drop the rear muffler assembly but I was able to install without dropping muffler.
This is second hitch I purchased from ETrailer. They have all your towing needs.
I think I got my wires crossed on my review. I left an excellent rating on what I thought was the receiver hitch for my 2011 Nissan Murano, but I think the rating I left was for the wiring kit for the lights hookup. Really doesn’t make any difference because the wiring kit was excellent as well. I have etrailer hitches on two other vehicles I own. That’s the reason I came back to etrailer for this hitch. Perfect build quality and it fit like a glove. Excellent people to do business with. You won’t be disappointed.
Great product and instructions for an easy install. I would recommend.
Great fit directions spot on make sure you clean weldnuts tap purchase was well worth it.
Bolted right up and tugged a moving trailer from Portland to LA
Hitch arrived in a box not damaged. The right side was good. The left side was bent slightly. Of course I learned this after starting on the right side. Took it back down and put it in a vice to straighten the left side. Once that was complete all went well. Lowering the exhaust and having the thread cleaner is a must. Makes it so much easier.
The hitch fit perfectly and was easy to install, even with me just laying in my driveway. Thaks for a great product at a reasonable price.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.