To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Fully welded Mercedes-Benz Sprinter 2500 trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hitch does not fit models with 30-3/8" frame, measured outside to outside of frame. No drilling required for installation
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (63 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Customer service was exceptional. Sales reps knew what they were doing and asked a few questions on Wheel base and frame width. Placed order and two days later the hitch was here. I upgraded from a 3500 lb to a 6000 lb tow hitch. Took about 1 1/2 hours to change hitches. The new one set in exactly where the old one was (no drilling holes). It was basically a one person job. I am very pleased with their service and product.
Super easy install, took me less than one hour including the time needed to remove and reinstall my Luverne Step. The best part is that the hitch fits snug under the bumper allowing me to keep using my step. Both components utilize the same mounting holes and have the same diameter holes for the carriage bolts. Awesome service, fast delivery!
The hitch mounted with ease, by myself on a 2014 Mercedes Sprinter passenger van with no rear step. For bike rack people- I did run into the problem that the Kuat bike hitch rack I installed sat too close to the van and risked breaking the windows. I tried an 8" extension...lame. Still didn't have rear door use. So Kuat makes a Pivot swing away that works with any 2" hitch rack and problem solved. Full use of doors, and plenty of clearance from windows with handlebars. Overall great hitch!!! Thanks!!!
I struggled with another vendor for 3 weeks to get this hitch receiver. Finally cut bait with them and ordered from etrailer. I called them (to make sure it was in stock - that was the problem with the previous place). They confirmed they had it and shipped it within hours. Arrived a day early and went on the van the next day. Should have started here, obviously.
30 minute, one person, two floor jack installation. The trailer hitch we purchased fit perfectly inside the frame and bolted to the existing factory bolt holes. SImply remove the factory shipping tie down bracket, line up the hitch, install all eight bolts as described in the instructions and its that simple. Fast shipping, great price and a quality product.
Easy to install and fits nicely. I've towed a 2300 lb trailer 7000 miles with this hitch and had no problems.
I used my motorcycle jack and a 2x4 the width of the hitch to make this a half hour install great fit. All hardware was top quality great instructions
Good product but they didn't provide enough washers and locknuts. Otherwise, easy to install.
Hitch bolted on within ten minutes, looks great! Over the past year, I have used to haul equipment on trailer numerous times and have never had to worry about losing a load. Thanks etrailer.
This is a great hitch receiver. It was super easy to install, super durable, and well finished / coated. I've been using it now for year and remain completely satisfied. The purchase experience with Ashley and the etrailer group couldn't have been better.
Fast shipping, good price, great seller, Hitch fits like a glove, I had a local dealer who completly lost my business when he tried to tell me that a brake controller would not work on my sprinter van, looked online and of course etrailer.com had the easy answer for my hitch receiver, Brake controller and harness, Love these guys, Thanks
Product install very straight forward , graet priduct.
Fast shipping!! Box was a little banged up, but hey you really can't hurt a trailer hitch in shipping. Easiest trailer hitch I've ever installed. Hitch was nicely powder coated. Extremely beefy bolts and nuts. More than that my expectations.
Installed the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" this morning on my 2019 Mercedes Sprinter 3500 4x4. Excellent fit and finish. Installed in about 15mins.
Came very quick (ordered on Sunday, came on the following Tuesday). Nice trailer hitch, bolted right onto my Sprinter van.
A very high quality hitch, went on without a hitch in less than an hour. Instructions were 100% accurate and written in English primarily. Looks great. Highly recommend.
PERFECT FIT , EXACTLY AS E-TRAILER ADVERTISED !! i INSTALLED MINE IN 35 MIN SOLO WITH MY WIFE HANDING ME BOLTS. i SET IT UP ON 3 PAVERS PER SIDE THEN SLOWLY FLOOR JACKED IT INTO PLACE AND DROPPED IN THE BOLTS. i WOULD RECOMMEND THIS SITE TO ALL WHO ARE WILLING TO SAVE A COUPLE HUNDRED BUCKS FOR AN HR OR LESS OF YOUR TIME AND DO A BIT OF ELEMENTARY WRENCHING!
Fit perfectly. Shipped on time. Was everything it should be. Box that it can in was damaged and hitch was exposed in spots. Could have been packaged better, that’s my only critique. Hitch was not affected however.
Very good fitment and great price. Install was two people about 15 mins. 2019 Sprinter
Great products....great quick shipping. A+++*
The Draw-Tite #75549 arrived one day earlier than expected (a good thing). I installed the hitch on my 2014 Mercedes Sprinter 2500 and it fit perfectly. All the holes lined up with no problems at all. Would recommend this hitch and etrailer experience to everyone. Thanks!
Thanks I'm very happy excelent product and fast delivery thank you so much
Very knowledgeable staff and easy to order off of the website.
Fast shipping, product packaging on time! Instruction video how to install it was very helpful. Very high quality for the price
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.