bing tracking image
  1. Trailer Hitch
  2. Mercedes-Benz
  3. GLK-Class
  4. 2015
  5. CURT
FITS 2015 Mercedes-Benz GLK-Class
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Special Savings on Select Curt Hitches.
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: C13177
In Stock
$241.95
Retail:$662.43
You Save: $420.48
Trailer Hitch
Confirmed to Fit
2015 Mercedes-Benz GLK-Class

GLK350 models

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
Instant Rebate
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

The best technical support and full trailer hitch installation instructions. Great price GLK-Class trailer hitch and expert service. Mercedes-Benz GLK-Class, 2015 trailer hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13177, or order online at etrailer.com.
  • All Info
  • Reviews (3)
  • Q & A (0)
  • Photos

2015 Mercedes-Benz GLK-Class - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • Class III
  • 2 Inch Hitch
  • 3500
  • Visible Cross Tube
  • CURT
  • 525
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Mercedes-Benz GLK-Class's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13177 Curt Class 3 Trailer Hitch Receiver

Installation Details C13177 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
525 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Exhaust must be temporarily lowered for installation , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13177

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Just what I needed for my car, very courteous and knowledgeable rep assisted me on the phone when I ordered the hitch



by:



by:
2013 Mercedes-BenzGLK-Class



by:

2013 GLK350 North American with the AMG styling package (different rear valance). The different valance did NOT interfere at all with the install.

I won't lie, this thing is a pain to install and the 4 bolts holding the strap to the bracket at the differential were too short. A quick run to Ace Hardware solved that. Looking at it initially, the strap is actually about an inch too short. Once I installed the new bolts and cranked them down, everything seemed to suck up as it should.

Now on to the good...it's a great hitch. Once installed, it's super secure and I doubt I'll ever have issues with it. It's identical to the Curt hitch...but with a slightly textured matte black finish. I think it looks much better than the glossy Curt hitch.

Sidenote: The Mercedes exhaust hangers will make you want to pay someone to do this. There's no room to work. This is an MB issue, not th h itch's fault. I trimmed some of the black plastic back and installed the hitch with the exhaust in place.

I'll try to send some pic of the hitch installed later this week.



by:

Nice quality



by:


6
6

See what our Experts say about this CURT Trailer Hitch

  • Availability of Install Video for Hitch that Fits 2013 Mercedes GLK350
    For your 2013 Mercedes GLK350 we only have install videos for the Draw Tite hitch part # 75774 and not the Curt you referenced part # C13177. I did attach a link to a set of detailed instructions for the Curt hitch for you to check out though.
    view full answer...
  • etrailer Hitch Design for 2013 Mercedes-Benz GLK350
    As of right now (February 2023) we don't have any photos of the etrailer Trailer Hitch Receiver # e72KR for your 2013 Mercedes-Benz GLK350, but fortunately this hitch looks exactly the same as the Curt Trailer Hitch Receiver # C13177 just with a matte black finish instead of glossy black like what the Curt has. I'm attaching a photo of the Curt hitch as well as a photo showing the difference in the matte and glossy black finishes for you to check out.
    view full answer...
    Image 1 for Image 2 for
  • Why is There a Different Hitch for the 2013 Mercedes Benz GLK 250 and 350
    The two hitches you referenced for the 2013 Mercedes Benz GLK are very similar but have different applications. The part # C13155 is the correct hitch for the GLK250 whereas the # C13177 is for the GLK350. While these hitches look very similar you will notice that the back mounting bracket of the 13177 uses a taller mounting plate that comes up higher than the other hitch. This is due to different shaped crossmembers on either vehicle model. Since you have a 250 you would want the part...
    view full answer...
  • Trailer Hitch and Bike Carrier Recommendations for a 2015 Mercedes GLK350
    We do have trailer hitches that will fit your 2015 Mercedes GLK350. They are all actually Class III trailer hitches and have 2 inch receivers. If you already have a bike rack that fits a 1-1/4 inch hitch you can use a reducer sleeve, # HT02, in the 2 inch hitch to use the 1-1/4 inch bike rack. All of the hitches will have the receiver and part of the cross tube visible beneath the vehicle. The hitches had to be designed in such a way that, to fit the vehicle, there wasn't away to conceal...
    view full answer...
  • Trailer Hitch Comparison for 2014 Mercedes GLK 350, Curt or Draw Tite
    For your 2014 Mercedes GLK 350 I would highly recommend the Draw Tite hitch part # 75774. It has higher capacities and will install in about half the time when compared to the Curt so it would be the best option. No reinforcing would be required either.
    view full answer...
  • Can Friction Sway Control be Used With Curt Hitch C13177 on 2014 Mercedes-Benz GLK350
    Let's start with the friction sway control, and yes, you can use that with your trailer and 2014 Mercedes GLK350 that has the Curt Trailer Hitch Receiver # C13177. What you will need is a friction sway control system by Curt, and a sway-control bracket for your ball mount: - Curt Friction Sway Control for Weight Distribution Systems # 17200 - Reese Sway-Control Bracket for 2" Ball Mounts # RP26003 The friction sway control can be used so long as you have electric brakes on your trailer...
    view full answer...

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924