To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Fully welded Mazda CX-9 trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Receiver hitch may limit hands-free liftgate sensor range. No drilling required for installation , Trimming or removal of underbody panel required for installation , Exhaust must be temporarily lowered for installation , Heat shield must be modified or trimmed for hitch installation
California residents: click here
Complete Towing Package for 2023 Mazda CX-9
Customers compare 76020 to these similar products
2023 Mazda CX-9 Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular CX-9 Trailer Hitch Accessories
Average Customer Rating: 4.9 out of 5 stars (375 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Pretty easy installation, only because etrailer provided the installation video. Instructions did not explain how to fish the hitches' bolts through the holes.
also, was able to install by myself, using a pair of jackstands to support the hitch.
This is the second time I ended up ordering this hitch (first time the car was totaled in an accident) and the third hitch I've ordered from eTrailer. The hitch itself is great and wasn't too terribly difficult to install; having the video instructions makes a huge difference. eTrailer customer service is good and I have decided that this is my go-to for anything towing related.
I ordered this unit to install on a 2024 Mazda CX-9, to tow a small teardrop trailer, and it has worked very well. Installation was easy and took less than 2hours, taking your time. I really like that there are videos on etrailer’s web site to aid in the installation process. I did buy a class3 hitch with a 2inch receiver and a separate bracket for the four pole flat connector for this install. One year later, it’s still doing great.
The hitch works as it should. The only issue is its not fully compatible with my bike rack because the receiver sits to close to the car. Overall I like the product and would buy it again.
Very easy install I ended up using a car jack to hold up the Muffler and a special rubber gapping tool that can be bought online to remove the supports for the muffler. Total install took me about 20 minutes.
The trailer hitch came complete and has worked out great. It was reasonably easy to install. I would recommend your company if you’re in the market for this type of accessory.
Your quality of the hitch is very good, and the hardware to attach the hitch to my SUV made installation very good and very sturdy! Your prices and the quality of your items is the reason I keep coming back to you for my needed equipment.
The fit is perfect and installation was a breeze especially with the provided gadgets to get the bolts through. A year later I already have rust inside the receiver which is depressing, it would be nice if these automatically came with a protective cover or additional coating to guard against rust. I used my hitch for a bike hauler maybe a dozen times in the last year. The bike hauler probably rubs the paint right off inside the receiver.
Solid hitch. Installed easily and the included pull wires for the bolts made it a breeze to install. Highly recommend using a jack with a wood block or some kind of pad to support the muffler when dropping it for the install. One surprise was that the receiver tucks so far back behind the bumper that I had to purchase a 7" receiver extension, wiring harness extender, and safety cable extensions to accommodate connection to both my utility trailer and boat trailer, but I don't really consider it a problem, just something it would have been good to know in advance.
Hitch was delivered in a timely manner and all the hardware was intact. However, the box didn’t do so well causing the hitch to pop through with some scraping on the hitch. Not bent…only cosmetic. I think UPS delivered it.
I’ve bought several hitches from them over the years. Every one has been priced competitively, and has fit with no issues. I would recommend etrailer to everyone.
Dan
4/10/2024
Perfect...not one issue. Very pleased!
Jesse M.
5/9/2024
Well built heavy duty hitch and very good instruction easy to install
Overall the installation video made it very easy to install with a helper. The quality of the trailer hitch is very good. There was some paint that had chipped off the edge exposing bare metal which needed to be protected but otherwise I am very satisfied with the product.
Paul
6/19/2021
Great. No problems attaching bike rack. Works as intended. No significant rusting.
Well designed and quality product. With the aid of the video, I was able to install the receiver and wiring with very little issues in a timely manner.
I wanted a two inch receiver and concealed trailer wiring which was not available from the dealer.
I would recommend this product without hesitation.
Jb
4/13/2020
Great product, As a light duty user, I have not experienced any problems.
Very easy to install both the hitch and wiring harness.
Put this in a 2018 Mazda cx9. It is a solid built hitch that should last a lot longer than the car. It was a little bit of a pain to put it on though.
This was a super easy installation. There was a video of the installation provided which I watched beforehand. Couldn’t ask for a better product, price or support! etrailer is my go to trailer store!
Pete
6/5/2019
One year later and the hitch looks just as good as the day I installed it. Highly recommended!!
Great hitch. Easy to install. Box was damaged in shipping and hitch had some damage.
Installation will certainly go faster with a second person helping. Doing it myself it took me close to an hour to complete. I didn't bother putting the car up on jacks and found there to be sufficient room to maneuver.
The install video on the site is super helpful and all that's really needed. It does help clear up the paper instructions that come with the hitch.
I used a strap to support the exhaust pipe and like someone else mentioned also utilized an overturned 2 gallon bucket to support the muffler while getting it off the hangers. There was enough clearance for the bucket to slide right underneath, but I was parked a very mild grade.
I was able to get it off the mounts with just WD-40 . Since I didn't jack up the car, I was able to leverage my body weight and the fact that car was sitting on all four wheels to pull the rubber mounts off without a pry bar. I sat with my legs under the car and grabbing each side of the rubber mount was able to work them off.
I found the rear mounts were far easier to get off than the front.
Once I got the mounts off, I removed the supporting bucket and loosened the straps to lower the exhaust further.
I then used the bucket to support the weight of the hitch as I got it in position. Leaving the guide wires in place for the bolts helped me align the hitch since I was working alone.
The paper instructions mention using the washer to pinch the bolt in place to make it easier to get the nut on without the bolt being pushed up into the hole. This was particularly key to doing the install alone and one handed.
Once you get one bolt attached the rest goes faster and is a lot easier.
A deep socket and extension bar was critical in getting the bolts on to the proper torque. Without the deep socket I was able to get the hitch bolted on tight enough to drive to the hardware store to get the deeper socket to then torque to 110 ft/lbs as per the instructions.
Once I got the hitch attached, I simply reversed the process by again using the assistance of the bucket to support the exhaust as I got it back on the hangers.
A bucket or some other easy to maneuver item to help support the exhaust and hitch were definitely key in attempting to do this yourself.
I was very pleased with the quick turnaround on my order. The product itself appears to be well made and was reasonable to install, although considering the size and weight of the hitch, it would have gone much more quickly with an extra pair of hands. This hitch was installed on a 2016 Mazda CX-9. The one issue I had was with the lower trim panel that had to be removed for the installation. After bolting up the hitch, I realized that I was not going to be able to get the trim panel back into position with the hitch bolted all the way up, and had to drop it some by loosening the bolts in order to get the trim between the hitch and the mounting points. Once I started retightening the bolts, I found that the hitch was pulling the middle of the trim piece up causing the two ends of the trim to splay downward. Snug is good but too snug can cause some problems. It is not a biggie because it is for the most part not easily seen by the casual observer, but if the manufacturer would like to make a good product better, they might take a look at dropping the hitch down just a bit in order to provide some relief between the hitch and the trim piece.
I watched the videos and read reviews for suggestions .... I’ll add mine. I used RV lynx leveler blocks to give myself some extra room to work. The rear suspension lower arms (awd) have oval holes on bottom that worked perfectly for the hooks of the cam lock strap I used to support exhaust system. An extra set of hands to get nuts started while I held hitch up in place was a big help. Instead of discarding the black plastic trim piece altogether, I reinstalled the two mounting bracket pieces to add some support to bumper fascia. (see pix) The trim piece is actually three pieces and only put together with push clips.
I have a 2023 Mazda, CX9. As mentioned by other reviewers, the hitch installed fairly easily (watch the videos!). A nice bonus is that it balanced well on a floor jack so I was able to slide it in by myself without any help. The included wires that are used to pull the bolts through the frame work brilliantly. I would’ve given it six stars but it didn’t come with a device that self installed the hitch while I watched and drink a beer!!
FYI- the distance from the face of the receiver to the furthest, protrusion on the bumper is 4”.
I couldn't be more impressed with etrailer. Great price, great shipping, great tracking on shipping, great accuracy on delivery date, and outstanding installation video.
It took me maybe 45-60 minutes to install it in my driveway. I had zero complications or problems.
The hitch fit very well.
I will definitely use etrailer again if I need to purchase a hitch in the future.
Everything was exactly as advertised. Packaging was tore up due to shipping in a cardboard box. Besides minor scratches on hitch everything was present and intact.
Fit nicely on my 2016 Mazda CX-9 Signature. Installation is straight forward but you do need to be handy. Or have a pro install it, it should take them only 30 minutes. I also purchased the Mounting Bracket 4-Pole Flat 18144 and the Tekonsha Custom Fit Vehicle Wiring 118278 which does fit all 2016 CX-9s (all '16 CX-9s have the harness already installed). Photos attached of my install in case this helps.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/10/2023
Oh, that is unfortunate. I will have our Customer Service team contact you. What I recommend is to use a rust resistant paint like Rustoleum to touch up the hitch before it is installed.