To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, Mazda CX-5 trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Grand Touring models have an additional underbody trim piece that will need to be permanently removed for hitch installation. No drilling required for installation , Exhaust must be temporarily lowered for installation
Average Customer Rating: 4.8 out of 5 stars (89 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Unfortunately, my otherwise reliable friend decided to elope earlier this month, and will be gone until late July. So, I set about installing this Curt C12170 by myself, slowly and carefully. My CX-5 is brand new; I was very careful. I used the Lisle muffler removal tool and silicone spray. (Don’t buy a cheapie muffler tool – they snap. Go for the Lisle or better). After two days, I gave up. I made it to Step 7, but lifting the receiver into position is a two-man job. I could not lift it, move the electrical wires out of the way, and pull the bumper cover back all by myself. The Good News: My nephew dropped by July 13 and helped me install the hitch receiver. It took us about 20 minutes to lift the receiver into position, fish the bolts through, and put the front bolts into the frame finger tight. It took me another 45 minutes to tighten and torque the hardware, zip tie the electrical cables, and rehang the muffler.
Now that it is installed, it looks great. I have mounted a Draftmaster trike rack and they function well together.
Eric P.
7/26/2024
The Curt C12170 is working out great after a year. I forgot to mention that I was 73 years old when I installed it. It would be even easier for a younger person.
Truly impressed- Great product at a great price.
My installation took about 3 hrs, compared to the 50 minutes shared in the online directions. That said, I did the installation using floor ramps, vice having the vehicle up on a lift, so I had to wrestle more awkwardly because I was laying on my back vice standing up.
And in my case, I had a very hard time getting the back bolts installed first, so I switched things up and installed the front bolts first, and then used a floor jack to jack up the back part of the hitch (pivoting on the front bolt) to get it closer to the correct height for the bolts to be pulled through.
That said, the Installation Video was VERY HELPFUL, and I am very pleased with the product, and the entire interaction with etrailer.com!!
(sorry for the lousy photos... just wanted to show that I actually did the installation)
The most important part of this hitch purchase was the excellent customer service I received from William S. Quick responses to questions and helpful resolution of the install. The value of these Curt hitches is also important as well as the ease and good fit of the installation. Ready for more bike rides now! This is the second hitch I've purchased from etrailer and both experiences have been great.
I didn't personally install this hitch, but was told it was very straightforward and easy. I did the wiring myself and only had issue getting through my firewall.
Have towed my trailer a number of times, no issues at all. Very satisfied.
I managed to complete the install without drawing blood!
I installed it without help and without the cx5 off the garage floor. It wasn’t as easy as it would have been with a helper but I got it.
All the holes aligned perfectly and all the bolts were exact.
Now I need the wiring harness which I thought came with the hitch I ordered but not so. I’m sure I read things wrong or simply ordered the wrong one.
Brooke M.
4/20/2024
Thats awesome about the install - bet it feels nice to do that yourself! Glad it went well! Also, wiring harnesses are sold separately. Part # TK85VR is what you would need if you still need one.
Pretty straight forward installation. A little maneuvering required and minor interpretations to directions depending on vehicle year. This is on a 2015 Mazda CX-5 and will be used for a bike rack and luggage rack. Very pleased with my purchase.
Daniel
7/17/2021
Still going strong. I has been used with a cargo carrier and regularly carries a bike rack.
This video showed me a very simple way to remove the muffler hangers instead of trying to use a pry bar or large screwdriver. Cannellock pliers did the trick. Only have to remove the bottom hanger pin on all four of them and then just turn them up out of the way.
I'm a healthcare provider with minimal mechanical experience and was able to follow the videos and instructions to complete the installation without issue. The hitch on my 2016 CX-5 has towed my 16' aluminum boat well and I couldn't be more satisfied.
First time self installer without professional equipment (car lift, power tools, etc.) should anticipate more than 20-40 minutes installation time. Well built, quality product that fits perfectly. I ordered the hitch through their customer service. Vanessa was very knowledgeable, answered all my questions and was helpful in making the right choice. The hitch arrived promptly. The etrailer video installation instruction was very helpful which I followed over the factory instructions. I installed the hitch in my garage, on the floor and by myself which took about 90 minutes. I would recommend having a helper which would likely reduce the installation time.
My order came quickly via UPS; the package was in good condition at delivery. The hitch was packaged carefully and all the parts were there. The instructions were complete but could have had more clearer illustrations that were easier to read. The install wasn't difficult and I was able to do it in an hour with a set of extra hands. Overall, the product is well made and worth the money spent. I also purchased a Tee wiring harness. I either missed the description or it wasn't there but a note about whether you need a POWERED or unPOWERED connection depending on your needs would have helped. I fortunately purchased the correct one.
I just bought a 2024 Mazda CX5 Premium. I was going to have the dealer install the Mazda Class I hitch. The hitch and wiring installation cost was going to run over $1100 + tax. I had installed a similar hitch from etrailer 10 years ago on my Chrysler 200. That install went smoothly so I figured I'd do it again. Ordered the class II a few days ago and it showed up yesterday. Installed it today. At age 70 and installing this thing solo definitely took longer than I anticipated. I had to be creative in the process but the end result is terrific. etrailer provides exact fit hitches that look great, out of the box and after installation. I am thoroughly pleased with the service and products from these folks. Two thumbs up to your company.
This is a very nice hitch & the directions were very good. But it took me at least 2 hours to install. The hardest part was getting the holes lined up and the carriage bolts through. It's possible that I didn't have all of the tape cut away so threading it through the hole was difficult.
Quick install and good instructions. Fifth one I’ve done so far.
My CX-5 has the optional trim on the rear valence. I thought this might need to be removed based on comments about Grand Touring trim needing to be removed. It fit fine.
My Curt Hitch is perfect in fit, finish and application. It solves the
problem of transporting and launching a 15' Alumacraft fishing boat. etrailer's price and advice are better by far than others, and include
excellent instructions plus videos if needed. This is a well engineered
product sold by very detail orientated professionals. I can honestly
say that I'm thrilled to find etrailer and highly recommend them.
Robert D.
6/4/2019
Perfect ! Dont even notice it, till I use it !
Purchased this specifically to mount a platform bicycle carrier on a Mazda CX-5. I did not install it myself so cannot speak to the ease of install, but I have had no complaints as a user over the past year.
Very pleased with the look and quality of the trailer hitch receiver from Trailer. The hitch was delivered 2 days after I placed the order. Etrailer earned my future business as they were very professional and responsive.
Fast shipping, fair prices, excellent customer service and fast response to messages. Website made it easy to find the perfect fitting hitch for my vehicle!
Fit perfectly. The step by step video guide is most helpful and I knew exactly what to expect before I started the job. Thanks for the help
I installed this trailer hitch to my new 2020 CX5. It took about 2-3 hours to install the complete hitch and wiring. I followed the video on installation and how to wire. No special tool require other than a torque wrench. now you may think this was a long time to install. but I am older than 75. Great Hitch!
Hitch and other ordered products arrived quickly and in good condition. Hitch was carefully packaged to prevent damage. Well done. Have not had time to install yet and will be doing this solo. Install package looks very well thought out, instructions are clear, accurate, and well illustrated. Note: I ordered some etrailer brand rubber hitch plugs (one for another car with 1.25 inch hitch) and I think these are well worth the low cost to give the job a more finished look and maybe keep grit out of your hitch when you back into dirt piles. If possible, I will update review after the install. So far I've spent about an hour gathering tools, checking kit for completeness, and removing the tape from holes in frame. My car lacks the rear plastic strip that is on some CX5s. The forty minutes for novice install might be a tad optimistic unless that's just to toss up the hitch and bolt it, not counting related activities.
Having had a Curt custom hitch on my previous vehicle, I ordered one for my new 2020 CX-5, expecting similar quality. As before, the installation instructions were clear and easy to follow. The hitch fit perfectly, holes lined up exactly where they needed to be, and the finish seems to be even better than my previous one, appearing to be a heavy, baked-on powder coating. After a year it still looks great and although I don't pull a trailer frequently, it's nice to have it there for when I do. I couldn't be happier with this product!
This hitch does fit on a 2022 Mazda CX-5 2.5 Turbo. The only thing you must do is leave the rearmost rubber exhaust hangers on the car during installation of the hitch or you will have to bend the hangers to put them on afterwards.
Also, the 118746 Tekonsha Trailer Wiring kit plugged in but left me without taillights. the turn signals and brake lights worked. I do not tow at night so I will leave it for now. Let me know if there is an alternative.
Easy installation for one person. Took me about 30 minutes. Having something to support the hitch from the center is useful, I used a floor jack to get it up into place. Keeping the washers in place was the toughest part; I'd recommend Curt to weld them on. Other than that the hardest part was all the gunk on the bottom of the car falling in your face.
This is the 3rd etrailer I have installed. Once again the operation went smoothly - with just a bit of a hiccup with one of the fishing wires. The actual product has always been excellent with a robust build. The install is about as easy as they can make it.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eric P.
7/26/2024
The Curt C12170 is working out great after a year. I forgot to mention that I was 73 years old when I installed it. It would be even easier for a younger person.