To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This custom-fit trailer hitch with a hidden cross tube installs behind your Mazda CX-30's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.
Features:
Specs:
The EcoHitch Hidden trailer hitch is designed to be as inconspicuous as possible. The hitch's cross tube bolts onto your vehicle's frame, behind your rear bumper. No drilling or welding is required. Once the hitch is installed, only the receiver will be visible beneath your bumper. This means that your vehicle can maintain its stylish, from-the-factory look, and you won't have to do any major modifications to its body or frame.
With a combination of aerospace-grade aluminum, steel, and stainless steel, each EcoHitch is made of a strong metal alloy that will withstand the test of time. The lightweight alloy is composed of recycled materials. Traditional steel hitch manufacturing can use coal or oil, which can contribute to harmful gas emissions. The EcoHitch's recycled materials limit the carbon footprint during manufacturing, so you get a sturdy trailer hitch while also helping the environment.
This EcoHitch trailer hitch is tested for durability and sturdiness. Using Finite Elemental Analysis (FEA), individual points of stress on the hitch can be detected and remedied. Designers can accurately test the hitch to ensure that it will meet or exceed SAE J684 standards. The EcoHitch Hidden trailer hitch is carefully researched and strength tested for a durable, high-quality hitch that can resist damage while on the road.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Modification of exhaust hanger may be necessary. No drilling required for installation
Complete Towing Package for 2020 Mazda CX-30
Customers compare EH55VR to these similar products
2020 Mazda CX-30 Owners Who Purchased This Trailer Hitch Also Bought...
Popular CX-30 Trailer Hitch Accessories
Average Customer Rating: 4.3 out of 5 stars (43 Customer Reviews)
This custom-fit trailer hitch with a hidden cross tube installs behind your vehicle's rear bumper, leaving only the receiver visible beneath it. Aluminum and steel alloy construction is durable and eco-friendly. Powder coat finish resists rust.Perfect fit. 2021 Mazda CX-30. It took under an hour to install. Definitely watch video before attempting.
Tip #1- buy 3/8” spring clips (they were only .38 cents each) like the ones included in my photos. These retain the bolts in the frame since only 1 fish wire is included. Once you have the washers and nuts on you pop them out before tightening.
Tip #2- verify good threads on all bolts by threading the nuts on before installing. I had a section of threads on the one bolt that needed filing due to damage during shipment.
Had the hitch installed by one of e-trailer's recommended installers, they did a great job.
Danielle
7/11/2024
Still using the hitch a year later for my 2 bike rack. No issues and still loving it!
The order arrived on time. The installation instructions were very accurate and clear. I was able to install the hitch by myself in about 2 hours taking my time. I removed the exhaust muffler from my CX 30 Mazda which made the installation easier for me. It is a solidly constructed hitch. I would buy it again.
No self respecting company should release a product this bad. It rattles on uphills because they don’t have enough space between exhaust and the hitch(in 2 places on each side. To make matters worse it has a major design flaw for the anti-rotate features for the bolts. Rather than having a positive stop on the lugs they chose to go with cheap star washers!!! Good luck taking this POS off your car after you properly torque the bolts. Do yourself a favor and avoid at all costs.
Heather A.
10/24/2022
It is pretty common for the hitch is rub against the exhaust after install. The good news is there are ways to fix it and stop the annoying rattle! I have attached the article here.
Helpful Links
Great product. I have done any car-related stuff but with the help of a friend (who'd fixed a hitch before) we managed to install this easily in about 1 hr. The video was very helpful as well as the paper instructions.
I fixed a 1UP bike rack to the hitch. Very happy with the end result.
Hitch arrived quickly, however it was missing the fish wire which is supposed to be included. I bought this myself for $[X].
Install took about 3 hours. The most difficult part was pushing the fish wire though the frame and lifting the hitch into position without bumping any of the bolts. The hitch looks great once installed (very well hidden). I have not noticed any muffler rattle.
Great hitch and easy to install (first one I have ever done on a non-truck type vehicle). If you make sure the hitch is pushed to the rear of the vehicle as far as you can, and trim the aluminum muffler heat shield located above the muffler (in the locations that contact the hitch) you won't have any "rattling or noises" from the hitch rubbing on parts. The people who complain about this problem just don't take the time to pay attention to these details.
Does not properly fit the turbo models. The hitch hits the muffler and makes a loud banging. I installed a shim between the hitch and muffler that eliminates the sound. However, this hitch was not designed properly for the turbo models.
Katrina B.
6/29/2023
Unfortunately, it is common that minor exhaust hanger adjustments may be necessary to get proper clearance. I have a link attached below for some assistance on how to adjust the exhaust hanger.
Helpful Links
Kit did not arrive with the correct size bolts to screw onto the nuts. Hitch paint has scratches from shipping. Waiting for company to return my email to get replacement parts to complete the install. Overly priced for the hassle.
It was delivered quickly. I had it installed at U-Haul. Everything was perfect.
compatible with a Mazda CX-30 Turbo Premium Plus. There was some exhaust rattle on the driver's side which was anticipated and fully explained in etrailer video
Attached video shows my bit of grind down on the muffle rwhich fixed the rattle
My Mazda dealer installed it. And yes indeed I had the “little tango” rattle on the muffler on the driver’s side.
Michael S.
5/6/2023
After grinding down the muffler and part of the auto chassis, the pesky rattle was still happening. After contacting MANY owners I finally found the ultimate solution. Its not raise the car, it LOWER the muffler.
The hitch is well built, but inadequately designed. I installed this on my 2021 CX-30 AWD Turbo. All hardware was included to complete the installation. The instructions were a bit vague in a couple areas, which led to some steps needing to be repeated. You have to be extremely careful handling the bolts once the fish wire is installed. This is tedious, but works well if you take your time. I installed on a lift with help from a buddy. Total install was about 2 hours.
The design problem related to how this hitch fits around the muffler mount. This is very little clearance, which results in constant clanging as you drive around. I used a dremel to remove some of the muffler mount sheet metal which helped. I really needed to remove even more, as the clanging continued, albeit not as frequent or as loud. This hitch needs to be redesigned to not require modification of the OEM muffler mount.
The hitch contacts the muffler's weld seam at the limit of the exhaust free play, sending loud shuddering and vibrations throughout the car interior and ultimately likely damaging the muffler and/or voiding the warranty. We feel ripped off by etrailer, who refused to help us resolve the issue.
Jenny N.
9/30/2022
You mentioned that the hitch is contacting the weld seam of the exhaust. We do have a FAQ on how to correct it in the link below.
Helpful Links
This hitch is custom made to fit the Mazda CX-30. It was easy to install and works well towing a trailer. I have three suggestions for improvement:
1) the four bolts that hold the hitch to the frame rails should be upgraded to the type of bolt that has a square shoulder that fits into a square slot on the metal tab that keeps the bolt up inside the frame rail. E-Trailer uses this type of bolt and tab with other hitches and they do a much better job of preventing the bolt from spinning when you tighten the nut.
2) Only one fishing wire was provided with the installation kit, so you have to re-use it for each of the four bolts to get them situated up inside the frame rails. This means when you raise the trailer hitch into place you better do a really good job aligning it or you'll push one or more of the bolts up into the frame rail and then spend an hour trying to fish them back through the holes. E-Trailer provides four fishing wires on other trailer kits and they shoudld provide 4 fishing wires with this hitch for the CX-30.
3) Once installed and tightened into position, this hitch sits too close to the muffler and I could hear and feel the muffler rattling against the trailer hitch as I drove over bumps in the road. The muffler is mounted on rubber grommets that allow it to move slightly up and down and side to side as the car is driven over bumps. This hitch should have been designed with more clearance around the muffler. The solution is to mark the contact points on the muffler with a Sharpie pen, then grind away some metal from the muffler to widen the gap between muffler and hitch. Fortunately the contact points are on the muffler seam and mounting bracket so grinding away some metal at these contact points does not harm the muffler itself.
Install went well, I did purchase this for a 2022 CX-30 even though it wasn’t confirmed to fit. Lucky for me it fit perfectly with no issues. Took me about 90 minutes from start to finish.
I used this hitch to mount a handicap scooter lift on a Mazda CX-30. It worked out well.
After a great deal of research to find a 2" hitch that would fit my vehicle, a friend told me about etrailer.com. I was thrilled to find a 2" hitch - and it was available to order. The installation was reasonable in price and it was easy to attach my bike rack. I weigh less that 110 lbs., so needed a setup that I could use now - and for years to come.
Great Product! Overall 2 hrs to install, I had a hard time finding a Class III 2" hitch, this is perfect for the car. Overall easy process as long as you have all the tools required, pictures attached have everything I used. A tie down is critical to drop the exhaust but after that everything is really easy.
No need to do do any holes to car frame, wire provided to get bolt, shim and spacer is easy to use, I'll advice to make a hook in the other end to be able to pull guide out while trying to align everything.
The EcoHitch is working and looks great on my CX-30.
Installed by dealer in about 2 hrs. Moved the exhaust bracket as advixed; Will be used to transport E--bikes so looks like it will be fine. Really quite close to the bumper so hardly visible. Very happy with the hitch
Product arrived in excellent shape and shipping by ETrailer was very quick. If Ecohitch could only adjust their product so there is no interference with the muffler (as also described by other reviewers) it would merit 5 stars.
2021 Mazda CX-30 Turbo. Nice fit, doesn't bottom out when backing out of driveway
Awesome Mazda CX 30 hitch. I installed it by myself in less than an hour, with the help of one Jack stand . I did remove the muffler(2 nuts)makes the job so much easier. The Eco hitch is top USA made quality and etrailer has lightning fast shipping.
Great job on installation as they had to be ingenious due to my vehicle. The quality was great.
It was pricey but i accepted it.
Used this for a storage bag on the back of my Mazda CX-30. I had U-Haul install it with no issues and it made a cross country trip no problem.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Adventurebob
7/17/2023
One year and still holding up great!