See what our Experts say about this etrailer Trailer Hitch

• Recommended Hitch for a 2023 Jeep Compass
  Yes, there is a hitch available for your 2023 Jeep Compass. I recommend the etrailer Hitch item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube is hidden behind the rear bumper cover. This leaves only the 2" receiver visible which not only looks better it also helps with ground clearance. I have attached a picture below so you can see what this hitch looks like once installed. If you are planning on towing...
  view full answer...
  
• Comparing Curt and etrailer Hitch for 2024 Jeep Compass
  The Curt # C13363 and etrailer # e48AR are both Class III hitches with a bolt-on installation. They also have the same max gross trailer weight of 4,000 lbs and max tongue weight of 600 lbs. The design for the two hitches is actually identical. The difference is going to be the finish. The Curt has a glossy finish while the etrailer hitch has a matte black finish. I prefer the matte black since it gives the hitch that OEM look. It also does a better job hiding dirt and scratches so that...
  view full answer...
• Does The Etrailer Hitch Reciever e48AR Require Drilling Into The Frame Of A 2023 Jeep Compass
  Installation of the etrailer hitch # e48AR will not require you to drill any additional holes into the frame. That said, you likely will need to enlarge the access holes in the frame. This can be done with a drill, file or rotary tool. So while technically we call this a "no drill" install, you will still need a drill to complete your install. You also will be trimming the bumper fascia and heat shield. All of the hitches we carry for your vehicle will require these same steps. I have...
  view full answer...
• Recommended Hitch for a 2022 Jeep Compass
  To add a hitch to your 2022 Jeep Compass, I recommend the etrailer Hitch item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper cover leaving only the 2" receiver visible. Since you are planning on towing you will also need a wiring harness item # C66BR and a ball mount kit item # C45534. I also recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure...
  view full answer...
• What Is The Best Way To Enlarge The Holes In My Cars Frame To Fit Bolts Thru?
  Yes you absolutely can use a step bit to enlarge the holes. There is definitely more than one way to do it. We always say to use a drill, file or rotary tool. A drill bit being the preferred method of our installers. I see that you were searching for parts for a 2018 Jeep Compass. If So I recommend our etrailer class 3 hitch # e48AR. Installation of this hitch likely will require access holes to be enlarged.
  view full answer...
• Recommended Hitch for a 2023 Jeep Compass
  I would be happy to! To add a hitch to your 2023 Jeep Compass, I recommend the etrailer item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. The etrailer Hitch item # e48AR is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight....
  view full answer...
• Does The etrailer Trailer Hitch Receiver Require Drilling To Install on a 2023 Jeep Compass?
  While you will not have to drill mounting holes for the etrailer Trailer Hitch Receiver # e48AR on your 2023 Jeep Compass, you may have to increase the size of an access hole to insert the square hole spacers inside your frame. You will also need to trim a small portion of your rear fascia for the receiver tube. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C66BR when you install the receiver. This will give you a 4-way flat connector. This connector is the most...
  view full answer...
• Fascia Trimming Needed to Install etrailer Trailer Hitch on 2024 Jeep Compass
  Not much; you only have to cut a 3-3/8" wide x 2 5/8" long section on your 2024 Jeep Compass to install the etrailer Trailer Hitch Receiver # e48AR. This will be under the bumper as well so it won't even be noticeable, but is needed so the receiver portion of the hitch has a place to protrude.
  view full answer...
• Will etrailer Trailer Hitch Receiver Fit 2023 Jeep Compass Trailhawk
  The etrailer Trailer Hitch Receiver # e48AR fits all models of the 2023 Jeep Compass. This includes the Trailhawk with the dual exhaust. For wiring you can use the Curt # C66BR. This wiring harness plugs into the connection points behind the tail lights. Once installed, your friend will have a 4-way to power a trailer's signal lights. I see you also looked at the # ETBC7. If the goal is to add a 7-way then this kit is the right choice. One way or another you have to start by adding the...
  view full answer...
• Recommended Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Jeep Compass
  I recommend using our etrailer Trailer Hitch Receiver # e48AR on your 2024 Jeep Compass. Our receiver has a matte black finish and a hidden cross tube which provides for a clean factory appearance. It also comes with a 2" opening which allows for a larger selection of hitch mounted accessories and ball mounts. You will want to install the Curt Wiring Harness # C59496 when you install the receiver. This will provide you with a 4-way flat connector which is the most common connector found...
  view full answer...
• Is Install of Hitch on 2020 Jeep Compass Same as Install on 2023 Jeep Compass
  Yes, the install of the etrailer hitch part # e48AR would be the same on a 2020 Jeep Compass and a 2023 since they are the same generation.
  view full answer...
• Does etrailer Hitch for 2024 Jeep Compass Require Drilling to Install
  The etrailer hitch part # e48AR that fits your 2024 Jeep Compass does not require any drilling to install. It does require some fascia/heat shield trimming and the exhaust gets temporarily lowered to install though.
  view full answer...
• Recommended Hitch, Wiring, and Brake Controller for 2024 Jeep Compass
  Towing a trailer with brakes will require adding a hitch, 7-way wiring, and a brake controller to your 2024 Jeep Compass. I recommend the following: -etrailer Trailer Hitch Receiver # e48AR -Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236 -Universal Installation Kit for Trailer Brake Controller # ETBC7 -Redarc Tow-Pro Liberty Brake Controller # RED24FR The etrailer hitch is a Class III hitch with a bolt-on installation. It has a matte black powder coat...
  view full answer...
• Does etrailer Trailer Hitch Receiver Installation Require Cutting or Drilling on 2021 Jeep Compass
  Installation of the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e48AR will not require any drilling on your 2021 Jeep Compass. This features a bolt-on installation and uses existing holes in the frame. However, you will need to trim the bumper cover and heat shield before reinstalling. Although we do not have an installation video for this hitch, the process is identical for the Curt # C13363. I have attached an installation video of the Curt hitch...
  view full answer...
• Recommended Hitch for 2024 Jeep Compass
  For your 2024 Jeep Compass I recommend the etrailer Trailer Hitch Receiver # e48AR. This is a Class III hitch with a 2" receiver and a bolt-on installation. The 600 lb max tongue weight will be more than enough to handle the weight of your bike rack and bikes. It also features a matte black finish for a rugged look that helps hide dirt and scratches.
  view full answer...
• Trailer Hitch Receiver and Wiring Harness Recommendation for a 2020 Jeep Compass
  I Recommend the etrailer Trailer Hitch Receiver # e48AR for your 2020 Jeep Compass. The Receiver # 75699 is a custom fit on certain model year Jeep Grand Cherokees. Our Receiver # e48AR has a hidden cross tube and a matte black finish to give it a clean factory appearance. The Vehicle Wiring Harness # C56369 will allow you to connect to the wiring on your tail lights and give you a 4-way flat connecter. This uses a powered module which will send power from the battery on your Compass...
  view full answer...
• Recommended Hitch for a 2021 Jeep Compass
  No, it doesn't matter. If your 2021 Jeep Compass was made in Mexico it's to American auto standards. The best hitch for it is going to be our etrailer item # e48AR. This hitch is custom fit and bolts to your Jeep with included hardware. It is a class III hitch with a 2" receiver, that has a 4,000 lbs towing capacity, and a 400 lbs maximum tongue weight. If you are planning on towing you will also need a wiring harness item # C56369 and a ball mount kit item # C45534.
  view full answer...
• Will Draw-Tite 76144 Trailer Hitch Receiver Fit 2022 Jeep Compass Latitude LUX
  Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 76144 will fit your 2022 Jeep Compass Latitude LUX. However, I recommend the etrailer Trailer Hitch Receiver # e48AR instead. The Draw-Tite has a visible cross tube so you're going to see the entire hitch hanging down below the rear bumper. The etrailer hitch has a concealed cross tube which means only the receiver will be visible. This gives it a nice clean look while also improving clearance. The etrailer hitch also has a matte black...
  view full answer...
• Trailer Hitch for 2017 Jeep Compass Trailhawk
  Hey Raffy! The correct hitch for your 2017 Jeep Compass Trailhawk depends on whether you have the new body style or the old body style. If you aren't sure, check your VIN number. New body style models will have the letter T as the 11th character in the VIN, old style has the letter D. If you have the new body style I recommend the etrailer # e48AR and for the old body style # e98836. Both options are Class III with a 2" receiver and a bolt-on installation.
  view full answer...
• Do You Have a Trunk Mounted Bike Rack for 2019 Jeep Compass for My 45 Pounds e-bike?
  Hello Tom, How much does you e-bike weight when you take the battery off? The reason why I ask is because all of our trunk style racks for the 2019 Jeep Compass have a weight capacity of 35 pounds per bike, and I cannot recommend hauling anything heavier. If your bike is 35 pounds with the battery off, then the Saris Guardian 2 Bike Rack - Fixed Arms - Trunk Mount # SAR93FR that you were looking at will work great! If your bike is a true 45 pounds then I have a different option for you,...
  view full answer...
• Availability of Class III Hitch and Wiring For 2021 Jeep Compass Limited
  Hello Dan; we do have a Class III hitch and wiring for your 2021 Jeep Compass Limited. For the hitch I recommend the etrailer # e48AR. All of the available hitches have a similar design but the etrailer hitch stands apart with the matte black finish. This gives it more of an OEM look and also helps hide dirt and scratches. The correct wiring harness is the Curt T-Connector Vehicle Wiring Harness # C56369. This plugs into the connection points behind your tail lights so it won't be anything...
  view full answer...

Do you have a question about this Trailer Hitch?