bing tracking image
  1. Trailer Hitch
  2. Infiniti
  3. QX60
  4. 2017
  5. Draw-Tite
FITS 2017 Infiniti QX60
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Draw-Tite

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Part Number: 76031
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$182.50
Retail:$320.73
You Save: $138.23
Trailer Hitch
Confirmed to Fit
2017 Infiniti QX60

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 1-800-940-8924 for expert service. We are your Infiniti trailer hitch experts, and offer a great price. etrailer.com carries a complete line of Draw-Tite products for your Infiniti QX60 2017. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part 76031 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (825)
  • Q & A (0)
  • Photos

2017 Infiniti QX60 - Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

  • 2 Inch Hitch
  • Class IV
  • 6000
  • Visible Cross Tube
  • 900
  • Draw-Tite
  • 6000 lbs WD GTW
  • 900 lbs WD TW
  • Custom Fit Hitch

Fully welded Infiniti QX60 trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 900 lbs
      • Maximum TW when used with weight distribution: 900 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



76031 Draw-Tite Class 4 Trailer Hitch Receiver - Max-Frame

Replaces 75750, 87625

Installation Details 76031 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
900 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.

Tongue Weight (TW):
900 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Models with an evaporation canister will need to manuever the hitch around the canister while installing, and there will be tight clearance to do so. No drilling required for installation , Hands-free Liftgate sensor areas may be limited to areas away from the center where hitch receiver opening is located




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 76031

Average Customer Rating:  4.8 out of 5 stars   (825 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

by:
2018 Nissan Pathfinder

High quality hitch receiver and easy to install. Did not have to trim anything on my Pathfinder. Fast shipping and excellent customer service (had an issue with the weld nuts on my vehicle being rusted, and customer service was very helpful).

Ali profile picture

Ali

10/27/2024

Hitch is still working great, no issues or problems. Highly recommend.



by:
2020 Nissan Pathfinder

I’m not impressed with the condition of the hitch I received from etrailer. I’ve ordered several hitches over the years for different vehicles but this one came scratched and chipped in various spots. It came in a box but no padding on it at all. On the face of the hitch receiver, there’s already a rust spot out of the box. Very disappointing.

Brooke M. profile picture
Etrailer Expert

Brooke M.

5/4/2024

I will have our customer service team reach out to you about this. I am so sorry to see it arrived in such a condition!



by:

This was purchased for our 2020 Nissan Pathfinder. The fit and alignment of this receiver was perfect for the vehicle. All of the hardware was provided and everything was of excellent quality. The installation was quick and easy and the instructions were well written and easy to understand. Having an extra pair of hands to help get things started and to line up the receiver will make it that much easier. Took less than an hour total to install. There was a few spots on the lower bumper that needed trimming which was accomplished with the use of a Dremel tool and some masking tape. Just take your time and mark the areas. This receiver is only used for a bike rack so there was no wiring involved or needed. We are extremely pleased with this and would definitely recommend to anyone needing a receiver.



by:
2018 Nissan Pathfinder

Receiver Fit perfectly, it required removal of the OEM tow eye bracket, not needed after receiver is installed. Pushes up slightly on the bottom of rear plastic bumper. Bought 7 Pin Plug, harness and plug mounting bracket. Mounting bracket didn't match the DrawTite hitch mounting and required additional hole to be drilled compromising the sealed painted surface.

D. M. profile picture

D. M.

11/13/2019

Additional mod was to mount rear gate sensor underneath the hitch receiver with wire ties and nylon spacer blocks. Sensor doesnt work when in contact with metal.



by:
2017 Nissan Pathfinder

When it is installed, it looks like it was meant to be there. It took three of us to get it in place and installed. Lining the mounting plates with the weld nuts was a little tricky. Once we finally got all six bolts started, the install was easier from there.

The install video on etrailer.com's website was a nice guide. It gave me confidence in believing I didn't have to hire out the install.

Matt W. profile picture

Matt W.

7/7/2019

I have used a few different trailers over the past year and felt confident hauling each one. I have had no issues with this receiver. I am confident it will last for years to come.



by:

Hitch is ok- does the job. Biggest complaint is that the powder coating on the receiver is flaking away leaving RUST that is low on the outside, (not a good look!)as well as traveling inside the opening. The only thing I even use the hitch for is a hitch hauler which has been hooked up maybe 15 days total over the year. So... ok hitch- looked good for a minute.

Victoria B. profile picture
Etrailer Expert

Victoria B.

8/26/2019

To keep your hitch looking great and to help prevent the spread of rust, we recommend using a rust-inhibiting black spray paint to touch up any rust spots starting to develop on your trailer hitch. I have also linked a help article on rust prevention for your convenience.



by:

Easy install, fits well! I did trim the charcoal canister per instructions, and it was necessary. One person can install the hitch, it went in easier than I thought. Fits extremely well!



by:

Easy installation and fits perfectly



by:
2017 Nissan Pathfinder

The hitch was well packaged and only took a little longer than advertised for installation. The installation was straightforward. The instructions were on target and made the job go well. The hitch looks good as it sits tight to the bumper.



by:

Pretty simple install definitely helpful to have a helping hand for install. Having the step-by-step video also made it go a lot quicker.



by:

Always great products and fast shipping and tech support is great if you have. Problem

Bruce profile picture

Bruce

4/26/2024

Works great good solid hitch



by:
2019 Nissan Pathfinder

Great price. Excellent item. The only issue is the item moved around alot in the package and got scrathced on the paint in a couple places. It's functionally good so won't worry about the scratches. (could use some touch up paint though)
Would do 5 stars if not for the paint damage.

Katrina D. profile picture
Etrailer Expert

Katrina D.

3/13/2024

Awe man, I hate it when it arrives like that. It is actually pretty common. Luckily, all you need is some rust-o-leum type of paint to cover up those scratches. I've sent your information over to our customer service department for them to look into some compensation for the cost of the paint. I also have a link attached with some information on the importance of covering the hitch to prevent corrosion.



by:
2013 Infiniti JX35

Very easy to do business with etrailer. Receiver hitch was delivered earlier than expected. Installed easily after cleaning the threads on my vehicle. They were rusted and corroded from being exposed to road elements. I purchased the receiver to use with a bike rack and it holds the rack very securely. It is low profile enough that it doesn't stick out or reduce clearance. Also, did not have to worry about making any modifications to accommodate the receiver.



by:
2015 InfinitiQX60

I ordered this for my 2015 QX60. Shipping took just over a week and everything arrived in good shape. I have to say, this is an awesome hitch with no drilling or bumper modification at all. My only comment would be is that the bolts used to mount the bumper are 19mm not 18mm as indicated in the instructions. The bolts I needed to remove the existing tie-down brackets were 18mm so maybe that's the confusion. I called the manufacturer and they confirmed the 19mm bolts.

I propped up one side to make it easier for a one-man install and tighted things down with a traditional ratchet before breaking out the torque wrench. Kudos to etrailer.com for providing a great DIY hitch at a great price. I'm already for tailgate season now!



by:
2014 Ford Edge

Received the hitch on time and good condition (no box damage either). Waited a few days to install due to weather/heatwave in our area. My Infiniti QX60 sits low, so to compensate and get a good height to install, I just backed in and let the back tires sit on the edge of the garage entrance (sloped driveway helps). Started to remove the 4 bolts that holds the tow hook, but they were super tight! I almost gave up, but had an idea to use the torque wrench and it worked! Then, propped up the hitch with a small step stool and screwed in one bolt on right side, then one on the left. When all bolts were screwed in, I used a cordless impact wrench to just lightly tighten then bolts. And finally used the torque wrench to tighten them to specifications (76 ft-lbs). Very happy with the install and hitch looks great in my QX60!!



by:

the hardest part was getting my teenager down to the garage to help.

installation was extremely easy. remove the 4 bolts holding the tow bracket, hold the receiver up to the frame, and bribe a teenager help run up 2 bolts to hold it in place, then install/tighten up the remaining 4 bolts and you're done.

entire installation took 20 minutes and could probably be done by a trained monkey.

pictures are of the tow bracket (removed, does not get reinstalled), three of the 6 bolts that hold it in place, and the receiver in place.



by:
2017 Nissan Pathfinder

Perfect fit for our 2017 Pathfinder.
Kudos
to etrailer.com for the software on the back end that so accurately matches their products to specific year, make, model, and trim. Double kudos for all of the videos...
The reviews are great for showing the features of the products, answering questions before they're asked - way better than wading through FAQ's. And the installation videos... Wow! Walking through the installation videos is what made me decide to buy and DIY. I had thought of hitch installation as something that required drilling and cutting and welding. I had always thought "Take it to a place that does hitch installation, it's not a DIY project". After watching the video, I saw that, at least on our Pathfinder, it's quick, easy thing to do with the tools I've already got. It's installed and looks great. Thanks!



by:
2016 InfinitiQX60

Great trailer hitch. Looks great!!!
Very
easy to install with help of a friend.

Bob D. profile picture

Bob D.

1/16/2018

I am very satisfied with the hitch.



by:

It fits and works so well. There was nothing wrong with the hitch. Just some of the bolts would not thread into the stock holes in the Nissan Pathfinder. After my two sons and I each tried for 30 min to get them to thread correctly we just used an impact wrench and screwed them home. It is solidly mounted. We use it daily with our 4 bike rack and it is awesome!



by:
2013 Nissan Pathfinder

Good sturdy hitch. Mounting holes didn't match up perfect with 2013 Pathfinder, but I made it work.



by:
2018 Nissan Pathfinder

I have a 2018 Nissan Pathfinder with the motion activated lift gate (MALG). The hitch fits nicely but it pushes up against the underside of the bumper slightly causing a some deflection, however no damage is done. No need to cut the bumper. The MALG works on occasion after several attempts (front kick, side kick, angled kick, jump kick, etc). I haven't found that sweet spot yet and still working on it. Overall, the installation was easy but requires two people.
One to align the hitch while you bolt it in. I'm mainly going to use it with a bike rack and not so much towing.

Final impression: Love it and recommend it.



by:

Hitch came quick and it was an easy installation. Looks great on the vehicle and was able to hook a 7 pin adaptor to the hitch. Looks real clean



by:

My second trailer hitch from etrailer. Installed it again no problem. Thanks again.

Jonathan profile picture

Jonathan

10/22/2023

Its been a year and still no problems. I use it mostly with our bike rack to bring our four bikes on trips. I never have to worry or even think about it, which is what I want or of a trailer hitch.

MikeL profile picture
Etrailer Expert

Mike L.

11/10/2023

@Jonathan That's great to hear! For trailer hitches, no news is definitely good news!!


by:

My hitch arrived sooner than expected and was flawless. It came complete with everything needed to finish the job. One piece of advice would be to start a bolt on the drivers side to hold it in place. Then install a bolt (on the passenger side) closest to the muffler bracket. it will make your life easier. If the bumper fascia rubs on your new hitch you can remove the brackets (only two bolts per bracket) holding it in place and bend them up slightly, then reinstall the bracket.



by:
2020 Nissan Pathfinder

Saved more than half what it would have cost me at U-HAUL. Glad I had help and access to a lift.
Purchased :
T-one Vehicle Wiring Harness 7-way Connector
Grease Dielectric 2 Oz.
Draw-tite Max-frame Hitch Receiver - Custom - Class III -
Mounting Bracket For Pollak 7-pole Rv-style Connector


25
828
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Will Spare Tire Fit With etrailer Hitch on 2020 Infiniti QX60
    You will be able to keep your spare tire mounted under the vehicle following the installation of the etrailer # e73AR. The spare tire will need to be lowered or temporarily removed to install the hitch. Once the hitch is installed, you won't have any issues putting it back into place. The only exception would be if you added some kind of aftermarket spare with an oversized tire. Temporary removal or lowering of the spare is very common for hitch installation. The reason you don't see...
    view full answer...
    Image 1 for
  • Recommended Hitch w/ No Fascia Trimming for a 2018 Nissan Pathfinder
    Yes, there is one hitch that does not require trimming of your Pathfinder's fascia. It does require trimming a tiny portion of the carbon canister shield underneath your vehicle. You will want the Draw-Tite Trailer Hitch item # 76031. This hitch is custom fit for your 2018 Nissan Pathfinder and bolts to the frame with included hardware. I have linked an installation video below along with the instructions. Step 2 will show you the little cut you have to make. If you ever plan on towing...
    view full answer...
  • Does Bumper Fascia of 2013 Inifiniti JX35 Need to Be Modified to Install a Hitch
    Whether you'll need to modify the bumper fascia or not will depend on which hitch you choose. The nice thing about the Curt Class III you mentioned, part # C13126 is that the entire hitch with the exception of the receiver opening is concealed behind the vehicle bumper. According to the installation instructions, a small (1-3/8 x 2-1/2 inch) area of the underside of the bumper fascia would need to be trimmed away. I've linked you to photos showing the area that would be trimmed and how...
    view full answer...
    Image 1 for
  • What is Best Way to Deal with Rusty Weld Nuts When Trying to Install Trailer Hitch
    The best and fastest way to clean out rusty weld nuts where a hitch installs on a vehicle frame is with a thread tap. Assuming you are trying to install the Draw Tite hitch part # 76031 that you referenced that would mean you'd need a thread tap in the size of M12x1.25.
    view full answer...
  • Does Draw Tite Hitch 76031 Fit 2017 Infiniti QX60 And Interfere with Backup Camera
    The Draw Tite hitch part # 76031 is a confirmed fit for your 2017 Infiniti QX60 and is compatible with the backup sensor and camera. If you were towing a trailer or had a bike rack installed in the hitch though that would most likely cause the sensor to go off and would block most of the camera's view.
    view full answer...
  • Trailer Hitch Receiver and 7-Way Wiring for 2017 Nissan Pathfinder
    The wiring kit, part # C56357, includes everything you need to get it installed on your 2017 Nissan Pathfinder. This kit is plug and play and is easy to get installed. I have attached an install video to help with the installation. The hitch for your Pathfinder, part # 76031 includes all of the hardware to get it installed on your Pathfinder. There is a welded on bracket to add wiring, but you need another bracket, Part # A10-9394VP, to get the plug for a 7-way mounted more solid.
    view full answer...
  • Ground Clearance When Installing Draw Tite Hitch on 2016 Nissan Pathfinder
    When we installed the Draw Tite hitch part # 76031 on a 2016 Nissan Pathfinder like yours we found that from the top of the hitch opening down to the ground measured 14 inches. So from the bottom of the hitch it would be more like 11-3/4 inches.
    view full answer...
    Image 1 for
  • Compatible Hitch and Wiring Needed for 2020 Nissan Pathfinder
    You are correct; the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 76031 is a confirmed fit for your 2020 Nissan Pathfinder and is a good choice. This will give you a durable and high quality 2" receiver that's perfect to cover all of your towing needs and even carry accessories. For wiring, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118670 will work without the towing package and comes with the relays and other parts needed to install...
    view full answer...
  • Comparison of 2018 Nissan Pathfinder Trailer Hitches
    For your 2018 Nissan Pathfinder, the hitch manufacturers have all specified the same weight capacities. Curt # C13309, Draw-Tite # 76031, and etrailer # e98908 all have 900 lb tongue weight and 6,000 lbs towing capacity. I recommend the least expensive options at the time of purchase because they all are great quality hitches with the biggest difference between them being the etrailer hitch has a flat/matte black finish versus the high gloss black of the other two.
    view full answer...
  • Parts Needed to Install 7-Way Trailer Wiring on 2013 Infiniti JX35
    We have a way to install a 7-way on your 2013 Infiniti JX35 but the # C56357 does not fit your vehicle. Instead you'd have to start with a 4-way like # C56190KIT which you'd then need to convert to a 7-way with the part # 37185. Unless plan was to install a brake controller too like the Brake EVN # TK63VR which you'd need the adapter part # ETBC7. The # ETBC7L you also mentioned is for if the brake controller was a wireless one like the Curt Echo Mobile # C51180. For a Class IV trailer...
    view full answer...
  • Any Suggestions for a Tilt-Away Bike Rack for a 2013 Infiniti JX35?
    If you are looking for something that you can remove the two extra bike slots to make the rack shorter, the Yakima HoldUp Bike Tilting Rack # Y02443-2 is the perfect buy. This rack has a 12 inch measurement from the distance from center of hitch pin hole to the closest part of the rack for extra loading space. I would absolutely go with this rack as a first choice. The Yakima LongHaul # Y02476 is a solid backup option. It has spaces for up to four bikes and can also be used for just two...
    view full answer...
  • Will Draw-Tite Hitch Interfere With Hands-Free Sensor on 2017 Infiniti QX60?
    You will still be able to use the hands-free lift gate sensor on your 2017 Infiniti QX60 with the Draw-Tite Max-Frame # 76031 installed. It won't be necessary to move it; simply perform a kicking motion and the lift gate feature will perform as usual. I have added a link to a video install of this hitch for you to take a look at.
    view full answer...
    Image 1 for
  • Does Draw-Tite or Curt Hitch Have Better Ground Clearance for 2019 Nissan Pathfinder
    When we installed the Draw-Tite # 76031 and Curt # C13309 trailer hitch receivers on a 2018 Nissan Pathfinder - which is the same body as a 2019 Pathfinder - we found that the Draw-Tite had both better ground clearance and better bumper clearance. The Curt measured 14 inches from the ground to the top of the hitch with 5 inches from the hitch pin hole to the end of the bumper, while the Draw-Tite measured 14-1/2 inches from the ground and 4 inches from pin hole to the end of the bumper. Due...
    view full answer...
  • Will Curt Hitch C13126 Install on 2017 Infiniti QX60 with Hands Free Liftgate
    With the Curt hitch part # C13126 installed on your 2017 Infiniti QX60 you still will be able to use the hands free liftgate of your vehicle but you will have to kick to either side of the hitch opening to activate it. I attached an install video for this for you to check out as well.
    view full answer...
    Image 1 for
  • Recommended Parts Needed for Towing with a 2018 Infiniti QX60
    We have exactly what you are looking for! In addition to the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 that you referenced we have the Tekonsha T-One # 118670 that installs in your 2018 Infiniti QX60 without having to splice any wires. I am attaching an installation video on a 2017 Nissan Pathfinder for you to get an idea of how the installation will go. Since this video is on a different vehicle you will want to check out the linked installation details for your application. If...
    view full answer...
  • Does a Trailer Hitch Provide Additional Protection in the Event of a Crash
    I would imagine that installing a trailer hitch like the Draw-Tite # 76031 or Curt # C13126 on your 2015 Nissan Pathfinder would help minimize damage to your vehicle in the event of someone rear-ending you (as opposed to not having one), but this isn't something that is tested for and rated on the trailer hitch so I can't really say that it does. Ultimately it will add some rigidity, but it could also potentially interfere with crumple points. If you are debating between the Draw-Tite...
    view full answer...
  • Replacement Hardware Kit for a Draw-Tite item # 76031 Hitch
    Yes, you can purchase just the hardware for the Draw-Tite item # 76031 hitch. You will want the Replacement Hardware Kit item # RHK. You will want to insert 76031 where it says Hitch Item Number and you will receive all of the bolts, lock washers, and washers.
    view full answer...
  • Recommended Trailer Hitch for 2013 Nissan Pathfinder
    Given the choice between the Draw-Tite and the Curt receiver hitch for your 2013 Pathfinder, I'd lean more toward the Draw-Tite hitch for the following reasons: -The Draw-Tite # 76031 has a capacity that's higher than the other hitch. You'll be limited by the capacity of the vehicle, but the higher capacities indicate that the hitch might be a bit more durable in the long run. -The Draw-Tite hitch is a less expensive by a few dollars. I don't mind paying a bit more if there's a difference...
    view full answer...
  • Complete Tow Package for 2019 Nissan Pathfinder with 7 and 4-way Wiring
    The Draw-Tite 2" Class IV hitch receiver # 76031 is a confirmed fit for your Nissan Pathfinder. This hitch includes a spot on the hitch to mount your wiring harness bracket. The Hopkins Wiring Harness with 4-Pole Connector # HM11143690 will allow you to tie into the Pathfinder's tail-lights to power your trailer lights. Then the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 will allow you to convert your recently installed 4-Pole into a 7-Way...
    view full answer...
  • Nissan Pathfinder 2013 Hitch and Trailer Wiring Recommendation
    The Reese Hitch part number 44679 is a 2 inch hitch confirmed as a fit for your 2013 Nissan Pathfinder that is very similar to the Draw Tite hitch part # 76031. The trailer wiring harness part # 118670 has been confirmed as a fit for your vehicle as well so it would be a great option. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch...
    view full answer...
  • Comparison of Draw-Tite and Curt Trailer Hitch Receivers for a 2017 Nissan Pathfinder
    I prefer the Curt, part # C13309, over the Draw-Tite, part # 76031, for a trailer hitch receiver on your 2017 Nissan Pathfinder. I like how the Curt hitch is mostly hidden behind the rear bumper and the only part you see is the receiver opening and safety chain loops. With the Draw-Tite you can see part of the crosstube under the bumper. Although, it doesn't require any fascia trimming and the price is better. I've linked a video from when we installed the Draw-Tite on a Pathfinder...
    view full answer...
  • Upgrading a 2017 Nissan Pathfinder with 4-Way Trailer Connector to Tow a Trailer with Brakes
    You're already off to a great start with the Draw-Tite hitch, part # 76031, and Tekonsha 4-way wiring harness, part # 118670, you already have on your 2017 Nissan Pathfinder. You're going to unplug the 4-way and instead use the replacement 7-way, part # 118267. The jumper harness with the relays that you installed before from the 4-way will stay in place and still be used by the new 7-way. Then you need a brake controller for the trailer's brakes. I recommend the Curt Echo, part # C51180....
    view full answer...
  • Will the Hands Free Liftgate Work With the Draw-Tite Hitch 76031 on a 2018 Nissan Pathfinder
    Yes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76031 installed. However, in order to activate this feature you will need to place your foot on either side of the receiver tube opening which I have attached a photo of for you. This will be the case for the majority of vehicles with the hands free liftgate feature like your Pathfinder. The Draw-Tite Max-Frame Trailer Hitch Receiver is...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch and Wiring for a 2016 Infiniti QX60
    For a trailer hitch that fits your 2016 Infiniti QX60 AND does not require any trimming you can use Draw-Tite trailer hitch # 76031. The other hitch option requires trimming. I have linked a video showing an example installation for you. For trailer wiring you can use # C56357 to add a 7-Way connector or # C56281 to add a 4-Way flat connector. I have linked videos showing example installations for you. I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee John S
Video Edited:
John S
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Jonathan Y
Video by:
Jonathan Y

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.