To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, Honda Odyssey trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Some models have plastic panel covering driver side frame. Remove panel for installation. Panel may be left off or trimmed to fit and reattached. No drilling required for installation , Exhaust must be temporarily lowered for installation
Average Customer Rating: 4.8 out of 5 stars (69 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.hitch was easy to install by myself took ten minutes. delivery was prompt and very fast thanks . carolina boy
The product was as advertised and received promptly. Very impressed with this order it was an easy order and quick delivery.
Took about 40 minutes to install and it fit perfectly. Since I installed it alone I did it on my lawn so as not to scratch the paint while moving it in place. It looks very nice.
The trailer hitch went on very smooth, 30 min done . The instructions
were very easy to follow, it,s a great product. Would order from
this company again .
Arrived promptly. Thanks to the video, installation was a breeze. Like others had mentioned, I did not have to lower the muffler for the install.
Too Easy! A 3/4in or 19mm socket and I think a 13/16in socket are the only tools needed. It is easier to put this hitch on than it is to put the spare tire on the van.
Product is great. Arrived in just 3 days. If you have an older model, I suggest having a tap and tap wrench on hand. I have a 2000 and the wire brush and lube suggested in the directions were no match for the dirt and rust build up on my frame.
Awesome Trailer HitchIt is everything I expected it to be. Great quality and easy installation. I especially liked the installation video that I saw on your website. It was very well done. Would recommend this etrailer.com to others.
The hitch was exactly as discribed on your web site. The installation was quick and easy. The videos that you provide were right on target. It has been a pleasure doing business with you.
Fast delivery, fabulous tracking feature on website, good product. Holes lined up almost perfectly. Recommend supplying as an option, thread cleaning brush or extra bolt to make thread cleaner, for older cars. It took me about an hour to clean the threads of my 6 year old minivan. Also needed a Dremel to enlarge one side of one hole. Minor problems. Overall good product.
2007 Honda Odyssey Hitch First time order,arrived within 3 day. 20 min easy install.Did not unhook tailpipe Br. slid pass side of hitch on top of tailpipe & secured dr. side. one man job. Took longer to unpack then to install. Elec wire harnes easy to install. 30 min and took time. Looks great.
Recieved fast, easily installed. Just wish I knew about the requirement for a tether strap when using a cargo carrier or bike rack.
The hitch shipped fast and went on my 2008 Odessey easily. I used 1 floor jack and did each side loose to start. I also found that it was not necessary to unhook the exhaust mount, the hitch slides under it fairly easily. I am not all that mechically inclined, but managed the install in under an hour. wd40, cleaning, and pre- running each bolt through before getting the hitch in position, really helped alot I think. All holes lined up perfectly. Now to get a bike rack...
As described, this hitch was super easy to install, even for a novice like myself. I had the hitch and the wiring harness all installed and ready to go within an hour of opening the box.
This is the second hitch I've purchased from etrailer and I've had excellent service both times. This Curt trailer hitch was deliverede about a week after ordering and I promptly installed it without any problems. Our Odyssey had less than 100 miles on it so the frame nuts did not need any cleaning. A couple differences in the packaged instructions from the website video: the exhaust pipe did not have to be dropped - you just push the exhaust away a few inches to gain space to torque the bolts; the trim panel on the driver's side is easily trimmed with box cutters and re-installed after the installation for a cleaner looking installation. Have the right tools and an extra pair of hands ready and this is about a 30-40 minute job.
Trailer hitch shipped quickly and was very easy to install. Exhaust does not need to be removed. Hitch just slides underneath. Did it all by myself lying under the car and took less than 30 minutes
The best part about buying from etrailer.com was the educational videos they make. I watched them all over and over again to make sure I was doing everything right.
The Curt Hitch worked out great for our Yakima bike rack. It took many hours of scrubbing off the rust from the weld nuts of our 2007 Honda Odyssey (I definitely recommend buying a wire brush if your vehicle is more than a year or two old!). Once they were all clean, the installation was super easy. (You'll also want to pick up a torque wrench if you don't have one; my neighbor over-torqued and broke off one of the weld nuts on his vehicle!)
Thanks again to eTrailer for great products and a great and super helpful website.
Installation directions and videos were super helpful. Installed it between the end of work and dinner time.
Fits well and looks sharp. Solidly attached to the vehicle. Excellent installation instructions.
A great looking hitch and works really well. Thanks for your speedy and great service in shipping and handling also. In general thanks to all involved.
Frank
6/19/2021
Great
The Curt Trailer Hitch came exactly as advertised within a week. It went on easily, exactly as the instructions said. I was happy to finally get a chance to use my torque wrench, but I really don't think I needed it.
I also liked the video instructions on the website. The ones in the package were ok, but the video on the etrailer.com website made it look easy...and sure enough, it was. Highly recommended!
I would take a picture, but (in addition to being lazy), there is no point as it looks exactly like the pics on the website. :)
The hitch took about two hours to put on but that was due to a) not having the tools I needed, b) most of the time was spent trying to get the little plastic holders to come out and then trying to put them back in. real time wasn't much and it looks really good especially since the Honda dealership wanted $1900 to install a hitch. So adding in an hour for the wiring harness makes a total of 3 hours and $200 vs. $1,900. Now that's Priceless to me. Thanks for a great product and clear instructions.
Just installed this Curt 1-1/4 hitch on a 2 year old 2011 Honda Odyssey. I watched the etrailer installation video which was very helpful. I used the #814092 tube brush to clean out the threads on the frame. An additional feature of this Curt hitch is the carriage bolt on the driver side that helps to attach the hitch to the frame. The passenger side of the hitch is able to rest on the exhaust while you bolt up the driver side. Everything went smoothly and I was able to install the hitch by myself in about 30 minutes. A great product ... I'm happy!
I asked etrailer which unit to order. Upon arrival, we discovered the hitch was not the correct the size. I contacted etrailer and they provided a free return shipping and sent the replacement unit at the same time!
GREAT customer service
Very good design and complete with all needed hardware. The fish wire used to install the last bolt needs to have the coil wound tighter so it fits completely into the threads of the bolt, or else the square hole in the rectangular washer needs to be slightly larger. It is very difficult to pull the wire and bolt through the washer once it is in place inside the frame rail. If you pull long and hard enough, the coil slowly unravels and the bolt eventually pops through. Otherwise the installation was straight forward and easy.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
9/1/2023
After a year of use, the Curt Trailer Hitch looks like new and has handled everything Ive thrown at it.