To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Installing a hitch can be daunting, but with the Curt Trailer Hitch Receiver, your job is straightforward. This custom-fit Class V XD hitch bolts directly onto your vehicle's frame without the need for welding. The kit includes all necessary hardware and instructions, so you can finish in 20 to 30 minutes, even faster if you're a pro. Just grab a floor jack and a couple of sockets, and you're good to go.
Worried about strength and durability? The Curt Trailer Hitch Receiver boasts a robust square-tube design, built to withstand rigorous towing demands. With a gross trailer weight capacity of up to 16,000 lbs and 17,000 lbs when configured for weight distribution, this hitch is ready for anything from a heavy travel trailer to a car hauler. It's so strong, your truck might give out before this hitch does!
Say goodbye to rust and corrosion. This hitch comes with a black powder coat finish over a protective base layer, offering superior rust resistance. It stands up against the elements, ensuring that your hitch looks and performs like new no matter the weather conditions or driving environments.
When towing, safety is paramount. The Curt Hitch gives you peace of mind with its standard 2-inch hitch receiver and dual safety chain loops that are beefier than those on the factory hitch. If your trailer has heavy-duty applications, you can confidently hook up larger clevis hooks with ease, knowing it can handle even a 10,000 lb trailer effortlessly.
Whether you're using a standard or weight distribution setup, this hitch has you covered. With a maximum tongue weight of 2,400 lbs, it optimizes towing configurations for your Chevy or GMC vehicle, ensuring the best performance whether you're moving your camper or hauling heavy loads down the highway.
Quality you can trust, made right here in the USA. This hitch isn't just functional; it's a finely crafted piece of towing equipment assembled with precision and care. Each hitch is built with top-notch materials to ensure it meets the high standards you expect from an American-made product. This is the hitch that truly outshines others on the market.
Tech Tip
Will not fit models with EPA canister mounted on passenger side frame rail. No drilling through vehicle frame required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation
Complete Towing Package for 2005 GMC Yukon XL
Customers compare C15324 to these similar products
2005 GMC Yukon XL Owners Who Purchased This Trailer Hitch Also Bought...
Popular Yukon XL Trailer Hitch Accessories
Product shipped faster than expected. Everything worked out great.
i got the hitch and wiring i asked for it all worked great i am very happy thank you got to go now pulling boat to the lake
Fair price, fast shipping and easy installation, just as they said. Installed in less than thirty minutes.
Excellent quality. Installation was a breeze Took myself and my wife 20 minutes to lift it into place and fasten.
My only complaint is that it leaves no room on the bumper to attach the trailer socket. I had to mount the socket further to the side than I would have liked.
Received the trailer hitch very fast and took me 30min or less to put it on looks and work's great very pleased with this product how it fits on my 2004 Avalanche
Product was just as described. Super fast shipping. Price matched with no issues. I enjoy doing business with etrailer.
Arrived in 3 days after ordering, and installed in less than 30 minutes. Couldnt ask for better service or install instructions...
Great service, quick delivery and best price. Hitch was shipped very fast and arived in perfect condition. Easy install. Unfortunatly I will have to come up with a mount for the trailer rec. since the factory hitch had the bracket for it and its no longer on the truck.
I bought the C15524 Class V Curt hitch for my 2005 Yukon. The product was received at my front door in three days!! Everything was in good condition and the product was as advertised. Installation was a piece of cake. I had been quoted $60.00 to have it installed but after watching the installation video I decided to do it myself. It couldn't have been easier. It took about 30 minutes from unpacking to drive away. An excellent product and great service from etrailer.
Installed on a 2005 Chevy Suburban 5.3 V8 and took about 1/2 hour from start to finish. Installation was simple and was able to mount on the frame with the bolt holes aliening up just perfect. I needed to remove the bumper mounting bolt on each end. Hitch is heavy duty. I used the car jack to hold it in place. It took me longer to remove the packing tape than to install the hitch.
We haven't used the hitch too many times, but it's worked great when we have. Before I installed it, I painted over the corners, as well as added silicone in the gaps where pieces meet & there wasn't a weld... just for added corrosion protection. No complaints, as it's just a hitch and works as such.
David S. 
1/31/2025
After the initial install, I have done zero maintenance concerning washing or protecting the paint in any way.
Well made receiver hitch. No drilling required. The install was easy, but I would recommend having a helper to help hold the hitch while getting the first bolts started. Also, there is no bracket included to hold the factory trailer wiring receptacle, so you will need to figure something out for that. This hitch is noticeable heavier duty than the factory one.
looks very durable and Heavy duty compared to the original. have not put it to the test just yet but I think it will do just fine! plan on towing a 20ft car trailer lets see how it goes!
So Happy with this Curt Custom Heavy Duty Class V Receiver Hitch.
Fits Perfectly behind my plastic bumper on my 2004 Cadillac Escalade EXT.
It looks factory installed. Definitely more stout in construction than the OEM
that came off. OEM receiver hitch was rated for 5000 pounds, this Curt is rated for 17000 pounds, Big Difference. Took me by my self less than 1 hour to install. I used the Curt supplied bolts and factory bolts per instructions. I had the factory trailer light receptacle trimmed and tack welded to the Curt Hitch. I have a large boat and now confident in this heavy duty hitch. Thanks etrailer here are some pictures
David R.
4/10/2019
The Curt class V hitch still performing in an excellent manner. This solid hitch has handled my boat with ease. After inspection and one years use, the welds remain intact with no corrosion or paint delamination. Still very happy I replaced the factory hitch with this hitch. Follow manufacturers max tow rating for your vehicle for safety.
Fast shipping. High quality hitch that was easy to install
I personally feel that CURT hitches are one of the best on the market. I bought the CURT class 5 hitch and it exceeded all my expectations. It takes alot to impress me and this truly did. The quality of the material, the construction and the fit and finish were perfect. With air tools, 15 minutes at most, to install. Now as far as Etrailer. Their price was the best which included fast free shipping. I Would highly recommend, if you need trailer hitches or any trailer accessories, don't look anywhere else
Randy
6/4/2024
Excellent product.Easy installation. Would only buy Curt products in the future
Jerred H.
6/4/2024
First, let me say that the hitch itself is brutally strong. No issues.
However; the mount on the 2004 Yukon XL is weak, and towing my 8,000 lb trailer load started to bend the frame ends. I've towed this trailer and load probably 10,000 miles with my '94 K2500 pickup, but the pickup hitches have a much longer mount that bridges the rear spring shackle. The Yukon/Suburban of this vintage, as I discovered, are famous for bent frames. So, it's no fault of Curt that GM made a weak area for the hitch, but both Curt and etrailer should note that you cannot put as much tongue weight on this hitch as it's rated for and get very far, particularly in freeway construction zones.
I'm happy enough because it's better than the factory hitch and with a weight distributing hitch it would be no problem. Still, it needs to be noted in the descriptions before purchase.
Excellent. Well made, strong trailer hitch does the job!
This hitch fits great and I didn't have to remove the spare tire. Easy installation.
Richard J.
11/12/2020
This hitch has been awesome
Replaced the factory rusty hitch with this heavier duty one. Easy to install, however receiver does sit about 1-1/2” higher than the factory one. Pulling my 29’ travel trailer feels more stable, not sure if it’s because the receiver is higher or it’s just a sturdier hitch.
Shipped quick,good price,well made. I installed this on a 2002 Avalanche 2500 with plastic cladding. There was some minor trimming required on the plastic(Dremel to the rescue).
You will need to attach the bracket from factory hitch,or add a bracket for trailer connector. It took longer to trim the plastic than it it did to install the hitch. The hitch fits like glove once trimmed,and is 80%hidden.
Factory hitch has been known to fail,due to design and wall thickness in my opinion.
The Curt class V hitch has a much thicker wall thickness and it's a square tube design rated much higher than factory for tongue weight and overall towing ability.I tow a 34 foot toyhauler that was at the limit of factory hitch,this hitch is rated 5000lbs heavier than oem and it shows once you compare the two.
I bought this hitch after realizing the stock hitch on my 2004 Tahoe was undersized for my trailer. This one is rated way higher than my truck will ever be able to haul; but on towing devices, overkill isn't a bad thing. This hitch is extremely beefy, way heavier than the stock hitch. It was very easy to bolt up due to the access holes in the Tahoe frame. Removing the spare isn't necessary, but it does make access easier. The quality of the welds, paint, fitment, and even hardware is exceptional. And as always, etrailer's customer service is next to none.
After I realized that I was towing a boat and trailer that was almost twice the rating of my original hitch, I decided to update to the Curt Class V. The hitch is much heavier and it is very well made. The installation was very easy and all the hardware fit perfectly. I decided to move my trailer connector into the bumper at the same time.
I now have the confidence to tow my boat anywhere without worry.
etrailer had the best price and the fastest shipping. I have always had great service with them
Much heavier duty than the OEM one and appears to be well made with quality coating. It should not bend like the OEM did (why I upgraded to this beast). Was a snug fit between the rear crossmember on a 05 2500 Suburban, but easy to wedge up in there using a floor jack. The hitch sits around 2” higher than the OEM so will need to Adjust all the hitches accordingly. Only complaint is lack of integrated bracket for the trailer wiring otherwise would have been 5 stars.
Fast delivery excellent hitch.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David S.
1/30/2025
Its 2 years now, no issues, corrosion per usual for new york, 116 or so on the corners is peeling up, but the rest of the paint is fine. The spots with no welds, where I silicone, are rust free. Probably have around 6000 miles all year round, 14 of that may have actually used the hitch at all, and that would be a ~4000 load.