FITS 1996 GMC C/K Series Pickup
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # C14082

lowest price pledge

Retail:$322.47

Our Price: $206.69

You Save: $115.78
Trailer Hitch
Confirmed to Fit
1996 GMC C/K Series Pickup

Cab and Chassis

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 43 lbs

Quantity: 
In Stock, Ships Today
C14082 - 10000 lbs GTW Curt Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Curt
  • Class IV
  • 2 Inch Hitch
  • 1000 lbs TW
  • 10000 lbs GTW
  • Concealed Cross Tube
  • 12000 lbs WD GTW
  • Custom Fit Hitch
  • 1200 lbs WD TW
Curt trailer hitch for your 1996 GMC C/K Series Pickup are available from etrailer.com. Installation instructions and reviews for your GMC trailer hitch. Expert service, and cheapest trailer hitch price guarantee. etrailer.com carries a complete line of Curt products. Order your Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number C14082 online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (32)
  • Q & A (33)
  • Photos
  • Why etrailer?

1996 GMC C/K Series Pickup - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

This fully welded trailer hitch receiver bolts onto your GMC C/K Series Pickup's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Assembled in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Measurement from center of bolt hole to center of bolt hole: 31-1/4"
  • Limited lifetime warranty


Note: Your vehicle must have 34" frame spacing


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



14082 CURT Trailer Hitch Receiver - Custom Fit - Class IV - 2"



C14082 Installation InstructionsInstallation Details C14082 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
10,000 lbs.

Tongue Weight (TW):
1,000 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.



Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside






Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C14082

Average Customer Rating:  4.9 out of 5 stars   (32 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- C14082
by:

Awesome product!! Very fast shipping and really satisfied 644798



- C14082
by:
Chevrolet

The trailer hitch fit my 1972 Chevy C-10 truck perfectly. No modifications were needed to truck or hitch. 622119



- C14082
by:
1976 Chevrolet C/K Series Pickup

Fast shipping and perfect fit on my 1976 K10 stepside 4x4 501339



- C14082
by:

Perfect fit! Exactly what my truck need ed. 468825



- C14082
by:
1984 GMC C/K Series Pickup

Good solid product at a great price. Thanks etrailer 464827


Comments

It has been flawless. Thanks for asking

Paul - 01/04/2019

48224

- C14082
by:

Odd application, for a 1975 c60. susan looked it up using the frame deminsions I gave her. it fit perfect. I have used etrailer before and I'll be back. thanks 442508



- C14082
by:

Installed easily and has been working well with no issues 441815



- C14082
by:
1995 Ford F-250 and F-350

This is a really great hitch - nice quality - easy installation - super strong - works great! 435522



- C14082
by:

Bought this to fit my school bus conversion and it fits perfectly 433296



- C14082
by:
1978 Chevrolet C/K Series Pickup

Thanks for the high quality products 433259



- C14082
by:
1978 Chevrolet C/K Series Pickup

Easy install.....I'm happy 432288



- C14082
by:
1977 Chevrolet C/K Series Pickup

Exactly as shown on the screen. 430721



- C14082
by:
1964 Chevrolet C/K Series Pickup

Have not used the trailer hitch, only installed as it was one of the early steps in the frame off restoration of my 1964 Chevy truck. It was a bit more work than the videos suggest. After ordering a second hitch that was to fit my truck, I still had to do substantial drilling. Not one hole really lined up. But it sure looks secure and substancial now! Look forward to having a bit more confidence in my hitch while towing. 412982



- C14082
by:
1980 Chevrolet C/K Series Pickup

Great hitch metal thicker than any i have been looking at all year. Wow I got it in two days put on my bus day three looks good easy to follow instructions. We are ready for lake camping sooner than expected thanks. Will keep your site for future orders. 412063



- C14082
by:
1971 Chevrolet C/K Series Pickup

looks good nice finish 407795



- C14082
by:
1971 Chevrolet C/K Series Pickup

Easy to figure out and super strong 406526



- C14082
by:
Chevrolet

bought two of these receiver hitches, one for my 1987 GMC V1500 SWB and one for my 1984 Chevrolet K10 SWB. both went on perfectly and look great. Haven't pulled anything yet 402881



- C14082
by:
1989 Ford F-150, F-250, F-350

Really well made hitch, made heavy duty . Was delivered promptly. Bought other products from this company , can't beat their prices. 399436



- C14082
by:

The right product for my truck and fast delivery. Can't beat the quality, price, and customer service. Not the first purchase and won't be the last. 391027



- C14082
by:
1997 Ford F-250 and F-350 Heavy Duty

Arrived quickly, fit perfectly. Great quality! 384228



- C14082
by:
1991 Chevrolet C/K Series Pickup

Fits as expected, shopping was fast and easy. Only recommendation I have is to leave the etrailer sticker with the packing slip instead of putting it on the hitch. 361064



- C14082
by:
1973 Ford F-100, F-150, F-250, F-350

We installed this for one of out customers and they are very happy 308062



- C14082
by:
1987 GMC C/K Series Pickup

We put this hitch on my 1987 GMC 61/2' short box 4WD with a regular bumper with no problems and look real nice and real strong with good load ratings 284919


Comments

real good havent pulled anything yet

Ronald P - 08/29/2017

27707

- C14082
by:
1994 Ford F-250 and F-350

it went on great,i had to drill hole,but it look good and fit great. and it was a great prize,i look at many place,fast delivery. 219556


Comments

it is doing a great job for me rachael i love the hitch it fit my truck great.

stanley g - 08/23/2016

20491

- C14082
by:
1977 Chevrolet C/K Series Pickup

Took the old cheap trailer hitch which has never worked well and three holes lined up so only had to drill 3 holes. I like the heavy duty feel of this hitch. Thanks so much for the sale price and the quick delivery. 212026



- C14082
by:
1972 Chevy C20

Hitch exactly as advertised. Fit properly and took a little less time than quoted to install. Installed on 72 chev C20 2WD. 177534



- C14082
by:

Build , fit , finish , shipping , price , all excellent . And Cathy T. is a jewel! Thanks,I'll be back. 176814



- C14082
by:

I went on-line and have a very specific vehicle. I found what I think I needed & then called in. I got Jean P. & she was excellent. She got me exactly what I needed. Hitch Receiver, Wiring Harnesses for Lights & Brake controller, etc. She sent me an E-Mail with the specs on everything. She made it so easy, It was a No brainer. For Quality, and Pricing, e-Trailer can't be beat. I'd use them again anytime. Probably on e of the best Purchasing experiences I've ever had. No guesswork, No Games, It was a pleasure. Keep up the great Job!!! And, Thank you. Sincerely, Bill T. Sellersville, PA 170654



- C14082
by:

This company was very efficient and helpful when I ordered the hitch. It fit my old truck easily and as expected. Thanks. 159061



- C14082
by:

was received on time 126233



- C14082
by:

Excellent delivery time. They were very helpful in helping me select the right product. 122398



- C14082
by:

I purchased a used ambulance as a work vehicle for my company. Needed a hitch but not sure which one I would need because of the ambulance box. One phone call to etrailer with their friendly operator and a referral number to tech support and I had my answer. A couple of quick measurements and I had my hitch product number. Placed my order online on a Monday, hitch arrived on Wednesday. Drilled the required holes in my vehicle and I was in business. Fantastic service! Between friends an family we have ordered at least 6 hitches and accessories over the last several years. 115429


Comments

What are the measurements and demensions of this hitch? I understand that all of the Chevy GMC 1/2 and 3/4 ton pickup frames are the same between 1967 and 1972. My truck is a 1969 C/10 long bed with the coil spring suspension. Will this hitch bolt up onto my frame without having to modify either the frame or hitch?

-- comment by: Lewis R - 02/22/2014

2897

You will most likely still need to drill holes for the bolts to pass through the frame and the hitch. So long as your truck has 34 inch frame spacing and a standard bumper, you will not need to modify the hitch. Check out the instruction link on the product page, it will show you what is required to install the hitch. You can compare that with your frame and get a pretty good idea of how it will all go together.

-- Patrick B - 2/25/2014

34
34

Ask the Experts about this Curt Trailer Hitch

Do you have a question about this Trailer Hitch?


  • Compatibility of a Hitch for a 1972 Chevrolet K Series Truck
  • The Curt # C15511 hitch is the confirmed fit for a 1972 Chevrolet K Series truck if you have the 8 foot bed and the deep drop rear bumper. The measurement from the top of the tube to the mounting flange is 8-1/32 inches. The extended length was to make sure the hitch would clear the bumper. If you have the standard bumper, then the Curt Hitch # C14082 is the confirmed fit. If # C15511 can be installed on the standard bumper model, then there will be a large gap between the bumper...
    view full answer...

  • Class V Hitch for 2003 GMC Savanah Cutaway
  • Buyers Products Class V hitch # 3371801102 fits the cutaway cab and chassis version of the 2003 GMC Savana Van. For the cargo and passenger van version their Class V hitch # 3371801100 is the correct fit. I am not sure which version of the base vehicle you have (nor could Buyer's Products confirm based on it having been made as a school bus) so what you can do to determine which hitch will fit is simply look at the frame under the van. If you refer to the photos of the two hitches...
    view full answer...

  • Trailer Hitch for a 1976 Chevy C or K Series Short Bed Stepside Pickup
  • We have some hitch options that fit your 1976 Chevy C or K series short bed stepside pickup. In this case the stepside bed does not matter. The length does. You can use Curt Class III hitch # 13028 or Class IV hitch # C14082. For # C14082 the frame width will need to be 34 inches (measured outside to outside). Or you can use Draw-Tite hitch # 75034-011 (does not fit models with heavy duty suspension). I have linked instructions for these hitches for you.
    view full answer...

  • Trailer Hitch Compatibility with 2008 Ford E-450 Frame
  • I reached out to my contact at Curt and they don't have a confirmed fit for the E450 (because there are a few different frames) but he did give me some suggestions that have worked for others. If you have bolt holes that are 38-5/8 inches from frame to frame, then the Curt # 14055 will work. If you have the standard 42 inch frame the # C15323 has slotted holes that are 39-1/8 inches on center. Finally if you have the 34 inch frame that is common on the cab and chassis models then #...
    view full answer...

  • Recommended Trailer Hitch For 1978 Chevrolet C10 Pickup Truck
  • We do have trailer hitches that do not require drilling for installation, but they are only designed for a 1978 truck with a deep drop bumper. If you have a deep drop bumper I recommend part # C15511. This is a Class V hitch and it has a 2-inch receiver opening. If you have a standard bumper on your truck, the trailer hitch I recommend is part # C14082. Installation of this hitch does require three holes to be drilled into the frame for each side. If you plan on doing some towing...
    view full answer...

  • 1995 Ford F-450 Superduty Cab and Chassis Hitch Recommendation
  • The best option we are going to have for a hitch for your 1995 Ford F-450 Cab and Chassis is the Curt hitch part # C14082 that is designed to fit 34 inch wide frames. This hitch requires some drilling so it would also require a bit of modification to get it to fit your vehicle. You will need to first verify that your hitch frame rails are 34 inches apart measured from the outside. The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches....
    view full answer...

  • Side Plate and Bolt Hole Spacing Measurements for Curt Trailer Hitch # C14082
  • I went out to the warehouse to take some measurements of Curt trailer hitch # C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the next hole. The center of the second hole to the center of the round clearance hole is 2 inches. And from the center of that round clearance hole to the center of the last hole is 1-5/16 inches. The crosstube is 2-1/2 inches square. The...
    view full answer...

  • Recommendation for Class 5 Hitch to Fit 1995 Ford F350 with 34 Inch Frame and Flat Dump Bed
  • Based on the size of your frame, it sounds as though your 1995 Ford F350 is the Cab and Chassis style. Curt offers a Class IV Receiver Hitch, # C14082, that with bolt directly to your vehicle's frame with no welding required. This hitch has a 1000 pound tongue weight capacity and 10000 pound towing capacity. We do not offer a custom Class V hitch for your truck but universal Class V hitch receivers are available. Curt offers the Universal Weld-On Receiver, # 15901, with 3 inch drop and...
    view full answer...

  • Trailer Hitches and Wiring for a 1993 Chevy 1500 Truck and 1999 Chevy Suburban
  • You would not be able to move a trailer hitch back and forth between the 1999 Suburban and 1993 Chevy 1500 because the hitches are different between these vehicles and are not interchangeable. Also, you would have to get new hardware every time. The hardware is meant to only be torqued down once and not reused. For the 1999 Chevy Suburban the most popular hitch is # C14029. For the truck the most popular option (for models with standard or step bumper) is # C14081. The recommended...
    view full answer...

  • Trailer Hitch Recommendation for a 1986 Chevy K10 Truck with 34 inch Frame
  • Since your truck has a 34 inch trailer frame that usually means it is a cab and chassis truck. Nonetheless, the Curt hitch part # C14082 has been confirmed to fit 1986 Chevy Trucks with 34 inch trailer frames so it would work well for you. This is a bolt-on hitch that would not require welding. Some drilling will be required though.
    view full answer...

  • Trailer Hitch for a 1997 Ford F-250/F-350 Cab and Chassis Model
  • For 1997 a cab and chassis model would have an outside to outside frame width of 34 inches. If that is the case you can use # 13028 which is for the cab and chassis models. Cab and chassis hitches for the 1997 F-250 or F-350 appear in the same list as the regular pickup models so that is probably why you didn't see it. We also have hitch # C14082 for the cab and chassis models. The difference between these hitches is the capacity. Hitch # 13028 is rated for 600 pounds tongue weight and...
    view full answer...

  • Recommended Hitch Receiver for a 1971 Chevrolet C/K Series Pick Up
  • I do have a hitch receiver option for your 1971 Chevrolet C/K Series Pick Up however, none of which will protrude through the rear license plate. For a rear hitch receiver confirmed to fit your vehicle, I recommend using the Curt Trailer Hitch Receiver part # C14082 as this hitch receiver will provide you with a clean look and Class IV towing capacities up to 10,000 lbs if your vehicle is rated that high. If you are looking to tow a trailer, I also recommend the 4-Pole Hardwire Kit with...
    view full answer...

  • Trailer Hitch for a 1979 Chevy C-10 with Trailering Special Package
  • Actually several of your pictures did make it through! What you have there is the standard/step bumper on your 1979 Chevy C-10. Deep drop bumpers, also called cowboy bumpers, drop way down. If your truck has an 8 foot bed you can use Curt trailer hitch # C14082. If you have a 6 foot bed you would need hitch # 75034 and 6 of spacer block # 01077-011 to complete the installation. If you go with the Curt hitch then I also recommend etrailer ball mount kit # EBMK2416. It comes with a...
    view full answer...

  • Trailer Hitch Receiver and Brake Controller Recommendations for 1977 Ford F-150 4X4
  • We can help you with both a hitch receiver and brake controller for your 1977 F-150. Your truck can be fitted with several classes of 2-inch hitch and these different hitch classes have varying weight capacities, ranging from a 5000-lb-rated Class III hitch to a 16000-lb-rated Class V. You can see all hitches on the link provided. You will need to use the Select Vehicle Style drop-down menu at the top of the page to will select your truck's type of bumper and that will allow you to see...
    view full answer...

  • Distance from Mounting Bracket to Top of Receiver on Curt Trailer Hitch # C14082
  • The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches. Curt trailer hitch # C14082 is a custom fit hitch designed to fit the following vehicles: 1973 - 2000 Chevrolet C/K Series Pickup Cab and Chassis 1973 - 2000 GMC C/K Series Pickup Cab and Chassis 1973 - 1983 Ford F-100, F-150, F-250, F-350 Cab and Chassis 1984 - 1991 Ford F-150, F-250, F-350 Cab and Chassis 1992 - 1996 Ford F-250 and F-350 Cab and Chassis If you have a...
    view full answer...

  • What Grade of Hardware Comes with 10k Hitch for 1977 Ford F-250 C14082
  • For a hitch that has a 10k capacity that fits your 1977 Ford F-250 you would want the Curt hitch part # C14082. The hardware that comes with this is Grade 5.
    view full answer...

  • Hitch Recommendation for a 1998 Chevy Silverado 2500HD Service Body
  • Since your 1998 Chevy Silverado 2500HD has a service bed on it currently that would indicate that I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916.
    view full answer...

  • Curt Trailer Hitch Recommendation for 1980 Short Bed Chevy Truck with Standard Bumper
  • For your 1980 Chevy truck with a short bed and a standard bumper the Curt hitch part # C14082 is a confirmed fit and would work well. Curt has confirmed the fit for us.
    view full answer...

  • Availability of Class IV or Class V Hitch Receivers for 1996 Ford F-250/350 With Bucket Truck Frame
  • We do have a Class IV trailer hitch receiver from Curt, part # C14082, that is confirmed to fit a 1996 Ford F-250/350 Cab and Chassis style frame. As long as your Ford has 34 inch frame spacing this hitch receiver will fit. It has bolt hole centers that measure 31-1/4 inches that you can use as a reference. Since I am not entirely sure what the details of your specific frame look like, if it looks more like a standard truck then you might be needing one that fits pickups with a standard...
    view full answer...

  • 1987 F350 with 34 inch Frame Hitch Recommendation
  • The 34 inch frame like what you have is typically found on the cab and chassis models of trucks. The hitch confirmed to fit your 1987 Ford F350 with a 34 inch frame is the Curt hitch part # C14082.
    view full answer...

  • Recommended Trailer Hitch Receiver for 1993 Ford F-350 Cab and Chassis
  • For your 1993 Ford F-350 cab and chassis, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14082 which is rated for 10,000 lbs and tongue weight of 1,000 lbs and goes to 12,000 lbs and 1,200 lbs tongue weight when paired with a weight distribution system. This is a larger capacity than some Class V hitches, and most likely will meet your needs. We don't currently have a manufacturer that makes a Class V hitch for your vehicle. With this hitch, I recommend...
    view full answer...

  • Will the Curt Hitch Part # C14082 Work with the Spare Tire on a 1986 Chevrolet C/K Series Pickup
  • I spoke to my contact at Curt about the Curt Trailer Hitch Receiver part # C14082 for your 1986 Chevrolet C/K Series Pickup and they informed me that as long as the spare tire is of the stock tire size then it will work with the hitch installed. If you are looking to tow a trailer you will also need a wiring harness and ball mount/hitch ball if you do not already have them. For a wiring harness that will give you a 4-way trailer connector at the rear of your truck, I recommend using...
    view full answer...

  • Parts Needed for Towing with a 1983 Chevrolet C20 Pickup
  • The Curt Curt Trailer Hitch Receiver # C13099 that you referenced will fit your 1983 Chevrolet C20 if it has an 8 foot bed and came with a deep drop bumper. This trailer hitch is rated for 5,000 lbs Gross Towing Weight (GTW) and 500 lbs Tongue Weight (TW). When used with a Weight Distribution (WD) system those capacities are increased to 5,500 lbs GTW and 550 lbs TW. If you have an 8 foot bed with the standard or step bumper then you will want to go with the Curt # C14082 instead. This...
    view full answer...

  • Will Curt Class IV Trailer Hitch Receiver Fit 1974 Ford F-250 with Standard Bumper and 34 Inch Frame
  • The Curt # C14082 will fit on your 1974 Ford F-250 as long as you have the crew cab. It does bolt on but will require drilling into the frame to install. I've attached a link that shows all of the Class IV hitch receivers confirmed to fit the different models of your F-250. If you also need a wiring harness use the Hopkins # 40105 for a 4-way connector or the Draw-Tite # 20023 for a 7-way. You might like an adjustable ball mount. The B&W Tow & Stow # BWTS10048B provides up to...
    view full answer...

  • Will Spare Tire Interfere with Trailer Hitch Installation on a 1978 GMC C/K Series Pickup Truck
  • The Curt trailer hitch # C14082 is designed to attach to the bottom of a 34 inch wide frame on a cab and chassis model 1978 Chevy C/K series pickup. If the spare tire fits between the frame rails then it will not be a problem, otherwise it would need to be relocated or the mount modified. If you do not have a cab and chassis model truck this hitch will not fit. I have linked the instructions for you to view. I have also linked the other hitches for your truck in case you do not have...
    view full answer...

  • Trailer Hitch Recommendation for 1980 Chevy C10 Stepside
  • Does your trailer have the deep stepside that uses a different bumper from the standard bumper or does your truck have same bumper as standard? We currently don't have any fits for the step bumper variations is why I ask.
    view full answer...

  • highest Capacity Trailer Hitch for a 1990 Chevy C1500 with Roll Pan Bumper
  • For the 1990 Chevy C1500 with a roll pan bumper the highest capacity trailer hitches available are Class III hitches such as # 13942. This hitch is rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. When used with weight distribution it is rated for 800 pounds tongue weight and 8,000 pounds gross trailer weight.
    view full answer...

  • Highest Rated Trailer Hitch for 1984 Chevy K10 Short Bed with Step Bumper
  • We do have trailer hitches available for your 1984 Chevy K10, however the B&W Class V Trailer Hitch Receiver # BWHDRH25122 that you referenced is only a fit for the long bed model of your truck and will not fit your short bed K10. The highest rated hitch we have available for your Chevy K10 with the short bed and factory step bumper is the Curt Class IV # C14082. The hitch will work perfectly as long as your truck has a 34 inch frame width (from outside to outside). This custom hitch...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Expert Research:
Michael H
Expert Research:
Jameson C
Updated by:
Adele M
Expert Research:
Adam R
Video Edited:
Chris R
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.