To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Ford Mustang Mach-E trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling through vehicle frame required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia.
California residents: click here
Purchased exclusively to carry my bike rack. Easier to install than I thought. Read the instructions, watch the videos. Measure twice, cut once. You WILL need help lifting/holding the hitch in place, whether it's another set of hands, a jack or some sort of lift.
Has worked excellent on the car over the past year! Only thing I would change is a car issue - the standard ID4 does not have a tow mode, so you have to turn off the backup camera every time to turn off incident detection.
I wanted a hitch on the Mach e for a 1Up bike rack. This hitch fit my '23 Premium AWD perfectly and looks like a factory install when complete. The installation was one of the easier ones I've done.
Two comments on the installation:
- For step 2, "Detach Wiring Harness Clip", I couldn't find a harness that looked anything like that on mine, and I was able to install the hitch without detaching anything. Maybe that step applies to a different trim level than mine.
- For step 3, "Trim lower fascia", I wasn't able to get it to cut with a utility knife as the instructions state. I ended up using a cutting disc with my Dremel.
Great product and easy to install.
Great instructions and product. Fit perfectly on my MachE. Spring wires provided make it much easier.
I elected not to do the rear most 8" cut across the cover and folded it up the waste over the receiver hitch instead. If I choose to remove the hitch in the future I will only have to worry about the 2 seams.
FYI, this is the first time I've installed my own trailer hitch. This is definitely a two person job to get this installed. You have to do a cut out of the plastic underneath the bumper so the receptacle can come out. I wasn't sure of the best tooling so I used a jigsaw but I'm sure there is a better tool for the job.
I'd recommend 2 people and jack up the car, the Mustang Mach-E sits pretty low to the grown so getting under it is a challenge.
After installation, it works great, used it for extra storage for luggage and a rack for our bikes.
Install was relatively quick and painless. It took me just over 2 hours and was pretty straightforward without any surprises. It was definitely easier with a second person helping.
The trailer hitch is strong and does provide the strength to hold my bike rack and bikes. When I got the hitch it did not fit because it had been bent during delivery. This is because there is almost no protection for the product in the box and seems to be a known issue. I called etrailer and they sent me a link on suggested ways to bend the hitch to the proper dimensions which worked but required more tools.
The kit was complete and the instructions were clear although there was a mistake for the size of the nuts to install the hitch. There was also a video available that showed installation on my car.
I can recommend the hitch but be prepared for having to bend it if damaged during delivery.
Excellent build quality and a tough finish.
The gloss level is rather high and nicely matches the black lower trim on the bumper cover.
Straight forward, simple install that took about 1.5hrs with 2 people (waayyyy easier to have 2 seta of hands
Perfect fit.
After having this hitch for a year it is holding up great, no rust or paint chipping. Totally happy
I cannot believe etrailer just puts three wraps of plastic on this and throws it in a cardboard box. Mine arrived falling out of the box and zero hardware. Lame is being nice. Incompetent…maybe
Install was a breeze if you have some experience. Definitely two person job to hold in place and bolt, but start to finish was only about an hour laying in the driveway under some ramps. Have a pretty steep driveway that clearance was a concern but clears fine still.
Beautiful hitch. Installed easily by my self.
Good quality product. instructions were very helpful.
However of the 4 bolts that came with the hitch, one bolt was an incorrect size and the nut would not fit with the bolt. This bolt also did not have the locking flange on it to avoid spinning while tightening. I was able to find a replacement bolt elsewhere.
Jenny N.
2/1/2022
I will have our customer service team reach out to you. The hitch manufacturer prefers to have the hardware that comes with the hitch be used for warranty purposes.
Installation was quick and easy
The design and construction seem good. Installation isn't too difficult, but it requires two people. There is a somewhat annoying problem with the one I received. Large areas were missing paint. I suspect it came from the factory missing paint, if that much came off during shipping I assume I would have seen paint chips in the box. I felt compelled to get a can primer and touch it up before installing it. That gives me some concerns about the long term corrosion resistance.
Once it was touched up and installed it gave me enough clearance with my 1 Up heavy duty double bike rack to open and close the back hatch without hitting. The hands free gate sensor still works with the hitch installed.
I really want to like it more, but the missing paint makes it hard to be enthusiastic about recommending this product.
Jenny N.
6/22/2022
I will make sure to have our customer service team reach out to you. When the hitches are shipped to us they are shipped stacked together in large pallets which means that at times they arrive in less than ideal condition. I recommend touching up the affected area with a rust resistant paint like Rustoleum.
Helpful Links
Took about an hour to install - much easier to have 2 people do it. Works great.
Exactly what I was looking to buy for my 2021 Ford Mustang Mach E
Awesome product and super easy to insta ll
Looks great!
Great service, excellent products.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Jenny N.
2/22/2024
I am sorry that happened. I will have our Customer Service team reach out to you and we will have the hardware sent out.