To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Say goodbye to complicated installations with the Curt Trailer Hitch Receiver for light-duty towing. This hitch is custom-fit for your vehicle, making the process a breeze. With precision, robotic welding that maximizes strength, you don’t need to be a professional to get a perfect, secure fit–no welding required!
Keep your vehicle’s sleek appearance intact with the Curt hitch’s concealed cross-tube design. It tucks neatly under your bumper with only the receiver visible, ensuring a clean aesthetic while maintaining the robustness you need for towing. It’s as if it belongs there, unobtrusively blending with your vehicle’s design.
Tackle whatever the road throws at you with this hitch’s superior rust-resistant finish. A gloss black powder coat over a protective base coat shields the steel construction from the elements, ensuring longevity and reliability. This durable coating keeps your hitch looking good as new, mile after mile.
Trust the strength and dependability of a hitch that boasts a robust, square-tube design and American assembly. Rated for up to 3,500 lbs of gross trailer weight and 350 lbs of tongue weight, this hitch is built to handle your light-duty towing needs, from bike racks to small trailers.
Get more from your hitch with its versatile Class II rating and 1-1/4" receiver opening, perfect for customizing with your choice of accessories. From bike racks to small cargo carriers, this hitch offers more options in comparison to Class I. Plus, a complete hardware kit and installation instructions are included, making it ready for your next adventure.
Feel confident in your purchase with lifetime tech support from etrailer.com. Whether you’re a first-time installer or a seasoned pro, expert help is just a call or email away, ensuring that you have support throughout the life of your hitch. Enjoy towing with confidence, knowing help is always available when you need it.
Tech Tip
Underbody panel must be trimmed and reattached on Fusion Energi to protect the battery compartment. No drilling through vehicle frame required for installation , Underbody panel(s) must be permanently removed for hitch installation , Fits Hybrid models as well
Really impressed! Installed this on my 2020 Fusion. 30 minutes working by myself though I had the advantage of a lift. Honestly, it would not have been much harder doing this on the ground. Excellent powdercoat finish on it, packed well and no scratches. Clear instructions and even had Grad 8 hardware.
Super easy install on my 2018 Ford Fusion Enrrgi. So glad I have a hitch now.
The hitch fit my car perfectly would give 5 stars but one of the 4 bolts that mounted to my frame had a bad bur that keep the bolt from threading in well which in this situation is super awkward positions.
Perfect fit, wonderful instructions complete with install video. This is my second hitch from etrailer.
Highly recommend!
The Curt hitch #C12091 is a very well made piece. It fits perfectly under my 2015 Ford Fusion. It's a great design, in that it fits up under the car except for just the receiver tube and chain loops. Most people would not even notice it.
It's sturdy, solid, has nice welds, and has a very nice powder coat.
You do need to remove the plastic panel under the rear to make room for the hitch. This took less than 5 minutes with a socket on a cordless driver. Some have expressed concern about not putting the panel back into place after the install. The hitch takes up most of the space though. I have driven at highway speeds since the install and I cannot detect any difference in wind noise or any rattle / shake noise from anything catching any wind back there.
I did the install by myself with the car on the ground. I had a slight slant to the driveway helping me a bit. But there's room to install the hitch without raising the car if you want. The bolt guides are absolute genius! Watch etrailer's install video. It really is that easy! After threading the blocks and bolts through the holes, I was able to lift one side of the hitch up and start the two bolts on that side loosely. Then I raised the other side and started those bolts. Then just snug it all up.
I used a 1/2 inch drive torque wrench that's about 2 feet long to torque the bolts. And when laying down on your side under the car, it can be tough to get enough leverage to get the wrench to click! If you don't have the right tools for that part, I would suggest you just tighten the bolts as well as you can with a wrench, then stop in at a local tire place and ask if they can torque them for you. (Obviously, don't use the hitch for hauling until you get it torqued correctly!)
I've used mine several times already and it's a great product!
(The pics show the hitch used with a Swagman two bike rack - which etrailer also sells - and is an awesome rack! Even with the weird frame of the Cannondale Super V 2000)
Shipping: I've used etrailer several times and they have always had my stuff to me fast. Faster than expected sometimes! This time was a little different. I hadn't heard from them after the initial order for over a week. I had ordered the hitch and a strap made by Curt to help secure a bike rack. The items showed in stock, so I called to see why it hadn't shipped. The lady was very nice and explained that the strap was out of stock and they were waiting on that to ship the hitch. I asked if she could have the hitch shipped so I could get it installed, and they could send the strap whenever. She said that they could do that and the hitch went out that day. Oddly, when I got the hitch, the strap was in the box also. I was surprised they didn't email me during the initial time to tell me what was up. But their customer service has always been so good, I may be holding them to a higher standard than I would compared to other companies out there that you never hear from at all!
All in all, great product (#C12091), from a great manufacturer (Curt), from a great online provider (etrailer.com)!
Thanks!
Simple installation. Has been working great for a year now.
Robert 
2/4/2025
its been 2 years now and my Curt trailer hitch is still working flawlessly.
Jerred H.
2/4/2025
I'm very happy with this trailer hitch receiver, and with the fast and friendly service from etrailer.com!
I haven't actually used it for anything yet, as I just put it on yesterday, but it seems very solid, it was easy to install, and as you can see from the photos, it is very unobtrusive once installed. Almost all of it is hidden behind the bumper, which is one of the things I liked about this hitch receiver. I got it to hold a bicycle rack, and when I don't have the rack installed, I like that you can barely see there is a trailer hitch on the car.
The photos and videos on the website were very helpful in showing how it would look on my car, and explaining how it was installed. I was able to do it by myself in 90 minutes, which includes the time it took me to get the tools out and put them away. It would have gone easier/quicker if I had someone to help me raise it into position while I threaded the nuts on, but I was able to rig up some supports to help me hold it in place. That was actually the hardest part, so if you have a helper, that will be good.
I think I might have been able to do the job without raising the back end, but it would have been tight. I used some ramps, and that gave me more room to work. Ramps, or jack stands, or some kind of lift would definitely be helpful. And I rented a torque wrench from the local auto parts store, as I didn't own one. The installation was pretty straightforward, as shown on the very helpful videos on this website.
Thanks etrailer.com! I will definitely be back here for other trailer-related needs.
David B.
4/8/2018
Still working great! I have been using it to carry a bicycle rack, with one or two bikes on it. It does a fine job, and I have had no issues with it.
I ordered this product and it arrived in 2 days. It was exactly as described and it fits perfectly.
The installation was very simple thanks to the video with the instructions they uploaded. For me it took more than 20 minutes because I installed it myself and I did not lift the car that much. I used a car jack to lift the car about 30cm off the ground. The hard part was until I managed to screw the first nut, after that the hitch stood in place and I could screw all the other very easy.
Pros:
- price (lower compared to other offers I had)
- durable
- nice look and finish
- very easy to install, you can do it yourself - hardware included (not the wrench)
Cons:
- it requires the removal of the wind deflector
This product may have other pros / cons different from the ones listed above; however, this is what I experienced so far.
I definitely recommend this hitch.
Daniel C.
5/1/2018
Still working and looking great! I had no issues during this time. Still 5 stars from me and I also recommend it!
I can't work on cars as much as I used to, (getting old) but this hitch was in and completed in about 45 minutes. The only help I needed was the wife helped me lift it up into place holding one end up for a couple minutes with the guide wires through the holes in the hitch while I put one nut on my side. Then she left as I grabbed the side she lifted and stuck another loose nut on. It is best to leave the pull/guide wires on the bolts when lifting it up to prevent losing a bolt into the frame channel. They give you 4 pull guide wires just so you can do that. The help isn't for the weight but more so to make it easier to put the guide wires through the hitch holes as you raise it up into place. For one person it would be awkward. One thing is the directions.
If not looked at carefully one might place the rectangular thick steel washers on the outside of the channel. Note that those washers are actually backing and strengthening plates for the frame channel and also keep the bolt from turning while tightening the nut and go """inside the channel""". Using the pull wires feed them through the access hole first before the bolt and they go in fairly easy. The bolt will pull back into them and through the frame fastening holes without a hitch. (not to use a pun here)
That said installation was a breeze
Kevin
4/11/2013
How was it removing the underbody panel? Im apprehensive about permanently removing something from a brand new vehicle. Is it noticeable visually? Any road noiseother issue? Just looking for some reassurance that removing this panel has no effect aesthetically or otherwise. Thanks!
2015 Lincoln MKZ 2.0 AWD- fits perfectly. I installed this with help of a friend, as others said it's best to have help holding it up under vehicle. I backed the car up on ramps to get underneath, removed the plastic rear thing near bumper. Once this was out, I was able to use the guide wire with bolts/nuts to get through frame. I got it all tight, couldn't fit my torque wrench to properly tighten but I just tightened very tight. Just went out with 2 bikes on a Yakima hanger rack and it worked well, I bought a hitch stabilizer at harbor freight to make sure it didn't wiggle. Looks good too! Thank you etrailer and Curt for decent videos and instructions.
Great service and install videos!!
Although Ford does not recommend ANY towing on a Fusion Hybrid, I installed this hitch in order to facilitate using a hitch platform for my 95 year old mother's wheelchair. Install was easy, if not identical to the hitch I installed on a 2013 Ford C-Max. No drilling and 'fishing' four bolts was easy. The most difficult step in the install was lifting and aligning the receiver to the bolts, which I did accomplish single handed with assistance from a floor jack. Even without the plastic shield everything is secure under the vehicle.
Great support,if and when needed! Installation process very easy... simple with help! I undercoated all exposed areas the shield protected then installed the hitch. Took me an hour not rushing. Then I decided to cut down the heat shield so I could install it to complete the job to 110% satisfaction.
John
8/30/2022
The hitch is still doing its job and the finish is holding up.
Easy to install. The only tricky part is mounting the actual hitch to the vehicle (its heavy and awkward). Would definitely recommend having a second person (or 2 additional people) to assist with this step.
I was able to re-install the underbody panel. I trimmed the ends off each side with a jigsaw so the panel sits inside the width of the hitch when installed. I used a rotary tool to remove the six plastic ribs on the underbody side of the panel so it can sit flush when the hitch is installed. Per the manufacture's recommendations and many reviews, it is not necessary to re-install underbody panel but I thought I would give it a shot, and it turned out great.
Overall a great looking concealed hitch. I only plan to use for bike rack (no trailering).
I recommend etrailer.
Yes, it's working well. We use it to attach a 2-bike rack.
Easy install, took less than an hour. Love that it is hidden under the car/bumper BUT my 1/4”-2” 5” raised extender is too short. Will need to get the 7” 1 14” etrailer extension to make it work.
Jenny N.
10/3/2022
I am glad that you like the hitch. You mentioned that you would need a different extender and I wanted to give you some information. For part # e93YR, from the pin hole to the back of the upright adapter it is approximately 3 inches so you would want to measure to make sure it would fit for your needs. There is also a straight adapter, part # e43YR, and the distance from center pin hole to center pin hole is 6.5 inches. Keep in min that using the adapter will the capacity of the hitch by 50 percent. This will be important when it comes to the weight of the bike rack and bikes.
Both hitch and bike rack delivered 3 days earlier. Hitch was very easy to install even without lifting the car. I did it in the street where my car is parked in front of my house. I’m a 76-year old man and it took me 1 hour and 25 minutes including watching the video which was very helpful. Luckily my 2019 Ford Fusion needs NO DRILLING. With no help and I did it all by myself I put hitch on top of two hollow blocks on both ends to make it closer to the 4 bolts. I have most of the needed tools but 7mm and torque wrench which I bought immediately. Ellen was very helpful in making sure that the hitch will fit my car
Installation video was very accurate. I was able to do the job by myself, with just a couple wrenches. When you install this part however the plastic cover underneath the bumper doesn't fit on anymore though. It seems that the plastic cover is not necessary. But regardless, later on I went above and beyond to custom cut the plastic cover and reinstalled the plastic cover after removing some of the plastic ribs and cutting some plastic away with a buzz saw. A year later and very pleased with the result.
I just completed the install of the curt hitch on my 2017 Ford Fusion se.
Let me begin by saying, I didn’t want to do this. My car is fully customized and I show it in location and national events, the last thing I wanted to do is mount a trailer hitch in this car. But we were blessed to have our family grow and I still want to go to shows in other states, so this hitch was nessary.
The kit comes with absolutely everything you need for a smooth and trouble free install, the bolt threading wires are a god send.
This was a 2 out of 10 on difficulty scale only because I did it by myself and had to hold the hitch up with one hand while I put the nuts on with the other.
The hitch is beautifully painted and wrapped for shipping, boxed in a rough secure package.
The tong hangs just below the rear plastic bumper and doesn’t look terrible on my car.
My car is equipped with air ride and I’m thinking of hooking a drag block to the bottom of the bar to throw sparks when going down the highway.
If you need one I suggest you buy this hitch .
This hitch worked out great on my 2016 Ford Fusion. The etrailer installation videos were really helpful, and the Curt hitch is hidden well behind the rear bumper. Install was done by myself in 40 minutes without jacking up the car. Hard to tell theirs even a hitch on the car.
Instructions rate this as "moderately" difficult. It's really very easy. If you can jack a car up and support it, you can put this hitch on. It's 4 bolts. Instruction video suggests a helper to support the hitch while bolting up. I didn't have one but managed easily myself. Really a simple install. Nicely finished hitch. Most is hidden under car. Only square receiver visible. Fish wires supplied with hitch are the key to this easy install. Very nice build quality on hitch, good welds, nice black painted finish. Hitch will be used for bike rack, light towing and cargo rack on a 2015 Ford Fusion Titanium.
I chose the Curt model over the Draw Tite due to the higher capacity (350 lbs vs 200 lbs). I use it primarily to carry a bikes on a hitch-mounted rack.
My hitch shipped out the day I ordered it, and I received it 2 days later. It came with all necessary hardware, and wire to fish mounting bolts through the frame of my vehicle. It came with printed instructions, and there are also videos showing how to install it on the etrailer website.
Installation was easy. No drilling or cutting. I removed the OEM underbody shield, and the mounting bolts go right into already existing frame holes. I was able to do it on my own, but a second set of hands to hold the hitch in place while starting the nuts would have been nice.
It looks great on the vehicle, nice low profile.
Excellent product- no rust and no bending or play when using.
Watched the installation video and was confident I could do it myself. I used a jack and jack stands to lift the vehicle and make accessing the holes in the frame easier. I’m not sure if it can be done w/o lifting the vehicle. Maybe... Anyway feeding the fish wire through was a little tricky at first but I quickly became proficient after fishing the first bolt through. I had to recruit my wife to thread the nuts as I lifted the hitch in place. Warning! Carefull with this step as you can easily push the bolts back through. My wife got all four nuts threaded successfully and I torqued them down the rest of the way. I don’t even think it took us 30 minutes. Awesome product!
This is the 2nd trailer hitch I've gotten for a Ford Fusion. First was on my 14, now on my 17. LOVE them! Easy install, great product. Same with the Swagman bike rack. I highly recommend etrailer. You can go wrong with this business!
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
7/19/2019
Still as awesome as day one. No regrets at all.