bing tracking image
  1. Trailer Hitch
  2. Ford
  3. F-250 Super Duty
  4. 2011
  5. CURT
FITS 2011 Ford F-250 Super Duty
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Part Number: C14355
In Stock
$260.73
Retail:$453.95
You Save: $193.22
Trailer Hitch
Confirmed to Fit
2011 Ford F-250 Super Duty

Pickup

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Call etrailer.com at 1-800-940-8924 for expert service. We are your Ford trailer hitch experts, and offer a great price. etrailer.com carries a complete line of CURT products for your Ford F-250 Super Duty 2011. Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" part C14355 from CURT can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (235)
  • Q & A (0)
  • Photos

2011 Ford F-250 Super Duty - Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

  • Class IV
  • 2 Inch Hitch
  • 12000
  • Concealed Cross Tube
  • 1200
  • CURT
  • 12000 lbs WD GTW
  • 1200 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Ford F-250 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 10,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 1,000 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



14355 Curt Class 4 Trailer Hitch Receiver

Replaces 14044

Installation Details C14355 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
10,000 lbs.

Tongue Weight (TW):
1,000 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

Vehicles with a 20 inch or smaller spare tire will still be able to store the tire under the vehicle. No drilling through vehicle frame required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation





Customer Satisfaction Score:

Ratings & Reviews

4.8

235 reviews
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Very heavy duty. Fast shipping, Easy instructions



by:
2003 Ford F-250 and F-350 Super Duty

Just like the description.... looks good and fit like a glove



by:

installed in minutes, had to use a u joint to torque the bolts to the back of truck, can only see the square



by:

real nice hitch. easy to install. would highly recommend. shipping was also great



by:

Couldn"t have got it any faster anywhere-- 2 days & on doorstep when i got home!



by:
2002 FordF-250 Super Duty

Great hitch, well made. Fit perfectly on 2002 F250 super duty. 20 minutes to install - took longer to remove the old one as was loctitied and had to heat the nuts to remove. Prompt delivery and service. Would recommend e trailer.



by:

At first I thought I had received the wrong hitch but after "reading the instructions" I realized it would work just fine. Etrailer.com got it to me as fast as they could. When there was a problem with our address in their computer (we live in a REALLY small town ) they made a phone call and handled it personally. We couldn't be more pleased with the product or their service.



by:
1999 Ford F-150 and F-250 Light Duty

I saved over $200.00 installing my receiverhitch myself. It took my son and I only nine minutes to install the hitch. Etrailer is by far the greatest value and the quality is second to none. I highly reccomend their services to anyone in need of a receiver hitch or any of their other fine products. Thanks etrailer.com you made a customer for life.



by:

Well built USA made. 30minute install by myself. Drop the spare. I used a couple 5 gallon buckets to raise it up and hold it enough to get the first nuts on by hand. Snug fit, had to bump it a bit to get all the nuts on but no problem. Use a 3/4" socket on ratchet or air wrench to pull it up tight. Torque nuts. Done. Dont forget to take off your bumper mounted ball first or you'll have to drop the hitch to get it off. Directions are very complete. Custom fit.



by:
2003 FordF-250 Super Duty

Good quality receiver, I bought this for my 2003 f-250 because the factory receiver was only rated @ 5000/500, which I thought was odd for a super duty truck. The factory unit was secured to the frame with eight grade 3, 5/8" bolts, the new one was secured with six grade 5, 1/2" bolts. The factory unit was just as well built as the new one but only had only half the weight rating and it had two more bolts, I don't know how they come up weight ratings but I needed 10k so its on there now. If you have a air impact gun and someone to help lower the old one and raise the new one takes about 1/2 hour to R&R.



by:

I called trailer and spoke to William S he was extremely helpful and very courteous. The hitch arrived when he said it would and bolted right up without any issues. I would definitely recommend trailer from my experience



by:

The hitch was reasonably priced, shipped quickly and the product installed without any surprises. I have used it many times throughout the past year with no issues. The quality of the hitch was excellent. I would recommend etrailer to anyone looking for a new hitch

Jim H. profile picture

Jim H.

6/30/2020

The hitch continues to work flawlessly. I am very happy with the purchase.



by:
2006 Ford F-250-and-F-350-Super-Duty

The Hitch was what I was looking for to fit under the Ranch Hand Bumper. If you are installing this on a truck that has a Ranch Hand Bumper, you will also need to order the BROPHY (code: BM20), Ball Mount, 13 1/4" long, to get the ball out from under the bumper.

I did have a few issues installing the Hitch, I believe that the hitch was damaged during shipping. The shipping packaging was damaged and UPS stated that it would not stay in the box during his route. The issues was that the left two blot holes would not line-up for the bolts. With the help of a five foot pipe was able to line it up.

Over all, I'm happy with the hitch.



by:

This was probably the easiest install of anything I have added to this truck and everything fit perfect done in 15 minutes by myself! longest time was getting the spare tire out of the way. This truck normally pulls a gooseneck which was a more difficult install but still not too bad. Need to pull a car trailer and this works perfectly. I am very happy with the fit, finish, and weld quality of this receiver hitch



by:

I ordered this hitch to replace mine which had started to rust through and I was concerned it would fail. The other reviews on this hitch indicated it would fit perfectly on my 2004 F250. They were correct, not a single issue! I installed it by myself but it would be much easier with a second set of hands. I don’t have anything to tow yet but I’ll be ready when the time comes.

Tom profile picture

Tom

6/11/2021

No issues with the trailer hitch. I’ve towed a trailer and a wood splitter so far.



by:
2005 FordF-250 Super Duty

Got this to replace the rusted out hitch on my 05 f250. Wicked good quality, and a class size up from the factory hitch. Had to remove the spare tire heat shield for the holes to line up on the passenger frame rail, off by about 1/2". No big deal, as I don't keep the tire under there. Many happy towing miles ahead.



by:
Ford

This hitch was exactly what I needed to upgrade from a 5k towing capacity to a 9k. My Brother and I, we got it into place and secured it.

I’m going to tow a 7500lb camper with a 7.3l Ford diesel Powerstroke. I bought this hitch for a reason and I believe in this company.



by:
2013 FordF-250 Super Duty

Fit great and tucked under the bumper p erfectly.



by:

Tight fit and easy to install. (HINT: get someone to help lift into place or set it on a storage tub and slide it under the frame. Also lower and remove the spare tire). Takes 6 bolts and done!



by:
2003 FordF-250 Super Duty

Very happy with etrailer. good prices, quick delivery. And this hitch is fabulous, super easy install and it is very heavy duty. Already placed another order with etrailer.



by:
2001 Ford F-150

Super good fitting hitch an was able to install it in about 10 minute by myself!



by:
1998 Ford F-150

Easy install and fit my 98 F150 perfect ly.



by:
2003 Ford F-150

Great customer service and prices. Ordered a hitch that was back ordered. Adam called me several times to let me know the status and offered me options. The hitch came a day earlier than promised. Perfect fit for my 2003 F150 morning extended cab. Didn’t have to take the spare tire down. The whole mounting process took less than 30 min. Solid hitch with good welds.

Dennis T. profile picture

Dennis T.

9/8/2019

The trailer hitch has been great. I’ve hauled cars, tractors, a big Vermeer chipper. Hookup was solid and quick. Great buy



by:
2003 Ford F-150

Very well built hitch, very easy to install only took my son and I 10 minutes to bolt in place . shipping was free and very fast only about 4 business days. The price from etrailer cannot be beat , and I will continue to by from them. I am going to order a weight distribution system with sway control in the near future.

Bill M. profile picture

Bill M.

8/16/2017

Still working great,great quality no rust yet



by:

Everything was perfect


25
235
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Trailer Hitch for 2001 Ford F-150 SuperCrew that Allows Spare to be Kept Under Vehicle
    As long as the spare tire on your 2001 Ford F-150 SuperCrew is less than 20 inch in wheel diameter we have the Curt hitch part # C14355 as a fit that will allow you to keep the spare. The spare would need to be lowered for the install of the hitch but after that you will be able to reinstall it. The Curt hitch you referenced is a universal style hitch that we couldn't guarantee would fit your truck or work with the spare.
    view full answer...
  • Will The Curt Class IV 2 Inch Hitch # C14355 Fit A 2002 Ford F-150 With The 7700 Package
    The Curt Class IV 2 Inch Hitch # C14355 is listed to fit a 1997 to 2003 Ford F-150 and F-250 Light Duty. When the Super Duty line was released in 1999 the F-250 Light Duty became the 7700 package for the F-150 model. So the Curt hitch will fit your 2002 Ford F-150 known as the 7700 package. You might have to lower the spare tire to install the hitch, but you will not have to remove the spare tire. The hitch will not fit vehicles that have a 20 inch wheel and tire as a spare tire. If you...
    view full answer...
  • 7-Way Relocation Option for 2014 Ford F-250 Installing Curt Hitch 14335
    It sounds like your current 7-way is attached to the factory hitch of your 2014 Ford F-250 that you will be replacing with the Curt # C14355 and are looking for a way to relocate the 7-way. One solution would be the part # PK12711U that you referenced which will allow you to attach your 7-way to the bumper. Or you could replace the 7-way with the part # HM40975 which comes with a 7-way and 4-way plus a bracket to attach to the rear bumper.
    view full answer...
  • Will All of the Aftermarket Trailer Hitches Designed for a 2002 Ford F-350 Have the Same Drop?
    The amount of recess and drop is really similar on all the hitches for your 2002 Ford F-350. For the least amount of drop, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13355 or the # C14355. They both have the 2-1/2 inches from the outside of the bumper to the center of the hitch pin and the 18-1/2 inch measurement from the ground to the top of the inner receiver tube. These hitches have the least amount of ground clearance restriction. The # C13014...
    view full answer...
  • Will the Curt Hitch Part # C14355 fit a 2004 Ford F-250 with a Ranch Hand Bumper
    More than likely the Curt Trailer Hitch part # C14355 would work on your 2006 Ford F250 with your Ranch Hand bumper as I checked with Ranch Hand and they state that their bumpers will let you retain your factory hitch. I checked with Curt and they told me that the # C14355 will install using your factory installation points. Looking at your pictures you might have to remove the hitch ball in your bumper.
    view full answer...
    Image 1 for Image 2 for
  • Does Curt Hitch C14355 Fit 1999 Ford F-150 Flareside
    Yes, the Curt Trailer Hitch Receiver # C14355 is a fit for your 1999 Ford F-150 Flareside.
    view full answer...
  • Overall Width and Mounting Hole Bolt Spacing For Curt Trailer Hitch Receiver # C14355
    The Curt Trailer Hitch Receiver # C14355 is going to be 35-1/2" wide. The more important measurement to look at is going to be the mounting bolt holes. I have included an image below with the mounting bolt hole spacing when measuring on center.
    view full answer...
    Image 1 for
  • Curt and Reese Hitch Receiver Compatibility and Origin
    The Reese receiver hitch you referenced is not in our system or available on Reese's website. I was able to reach out to Horizon Global, parent company to Reese, and ask them what vehicle that hitch receiver was for and they said it fits a Toyota 4runner from 1987-1995. The Curt receiver hitch item # C14355 you were looking at fits all of the following vehicles, 2015 - 2016 Ford F-250 Super Duty 2015 - 2016 Ford F-350 Super Duty 2005 - 2014 Ford F-250 and F-350 Super Duty Pickup 2008...
    view full answer...
  • Compatible Hitch Fit for Ranch Hand Legend Aftermarket Bumper on 2009 Chevy Silverado 2500
    The hitches we offer for your vehicle are designed for use with the factory bumper, but we do have options that might work for you. The deepest drop custom hitch we offer for that truck is the B&W # BWHDRH25187 which has a 6-1/2 inch drop. The drop is the vertical distance between the underside of the frame member and the underside of the bumper. If this distance on your truck is less than 6-1/2 inches, then the # BWHDRH25187 would be a fit. If that amount of drop isn't sufficient, you...
    view full answer...
  • Recommended Trailer Hitch for 1999 Ford F-350 Super Duty
    I have just the trailer hitch for your 1999 Ford F-350 Super Duty. Check out Draw-Tite Trailer Hitch # 41922. This is a heavy duty Class IV trailer hitch with a 1000 towing capacity and is a bolt on installation like you are looking for. If you want to do some towing you may be interested in the following parts: For a wiring harness use # 18252 If your F-350 has the tow package use # 118243 I also recommend etrailer ball mount kit # EBMK2416. It comes with a ball mount, 2 balls, a hitch...
    view full answer...
  • Can I Move My Hitch From a 2004 Ford F-350 to a 2008 Ford F-350
    It sounds like you're asking whether or not the B&W Turnoverball Underbed Gooseneck hitch # BWGNRK1108 is compatible with both the 2004 Ford F-350 and the 2008 F-350 and I'm happy to report that it is compatible with both vehicles. If you're asking about an actual frame mounted, bumper hitch like the Curt # C14355, that is also compatible with both vehicles. If you're looking at a specific hitch that you're trying to swap and can provide me with the model and manufacturer, I'm happy to...
    view full answer...
  • Trailer Hitch Availability and Fit for 2002 Ford F-350 Super Duty FX4
    The correct hitch for your 2002 Ford F-350 Super Duty FX4 will depend on the bumper it has. You can use the linked page to see all options; just use the Select Vehicle Style drop-down menu to choose the type of bumper that is on your truck. Once you select your bumper style the correct hitch options will be shown. Let's say you have a standard or step bumper. In this case you have choices in Class III, Class IV and Class V hitches from Curt and other brands. For a 2-inch Class III hitch...
    view full answer...
  • Receiver Hitch Recommendation for 1954 Ford F-250 Truck
    Curt and Draw-Tite don't list any specific hitch fits for a vehicle that old, but luckily enough, cab/chassis trucks typically use a 34 inch wide frame and there are tons of those available. I'd recommend the Curt # C14082. This Class IV hitch has a 12K towing, 1K tongue weight capacity. To absolutely confirm the fit, before ordering you'll want to measure the height difference (also known as the drop) between the underside of the frame member and the underside of the rear bumper (if there...
    view full answer...
  • What is a Deep Drop Bumper? How Do I Know If I Have One?
    A deep drop bumper is also known as a cowboy bumper. It is taller than a regular bumper, and would use a receiver that is lower than what would be used on the same vehicle that was equipped with a standard bumper. If you click on the provided link, you can see our Bumper FAQ article that will explain it in full. If your 1999 Ford F series has the cowboy bumper, the # C15316 would work great for you. If you have the standard bumper, # C14355 would be a better choice. This hitch will only...
    view full answer...
    Image 1 for
  • Can The Curt C14355 Trailer Hitch Fit A Ford Ranger
    The Curt Trailer Hitch Receiver # C14355 is only a fit for select F-series trucks and would not be a compatible fit for a Ranger. If you can provide the year of your Ranger I'd be happy to list out compatible trailer hitch options.
    view full answer...
  • What is the Mounting Hole Spacing for the CURT Trailer Hitch # C14355
    I spoke with my contact at CURT about Trailer Hitch # C14355. From side to side, the holes that would be furthest forward on the truck are 34 inches apart on center. The 2 sets that are at the end of the hitch are 33-11/16 inches apart on center. Front to back, the two closest holes are just a hair under 2-1/2 inches apart on center. From the middle hole to the furthest away hole on center it is just a hair over 11-1/8 inches. I have included a link to the installation instructions for...
    view full answer...
    Image 1 for
  • Hitch, Wiring & Related Items for 1999 Ford F-150 Standard Bed
    For your 1999 Ford F-150 with standard bed Curt Class IV 2-inch hitch # C14355 is a confirmed fit. The Curt ball mount # C45341 is compatible and will provide either 3-inches of rise or 4-inches of drop. You can use your existing hitch ball IF it is Class IV-rated and if it has a 1-1/4-inch diameter shank. If not you can use either 2-inch ball # A-90 or 2-5/16-inch ball # 63840. If ball mount # C45341 does not have the correct rise or drop to keep your hitched trailer level then you can...
    view full answer...
    Image 1 for
  • Parts Needed to Install Trailer Wiring on 2000 Ford F-150
    Since your 2000 Ford F-150 Lightning does not have the factory tow package you'd need to go a different route for trailer wiring. You'd want to start with the part # 118344 for a 4-way wiring harness. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way...
    view full answer...
  • Trailer Hitch Recommendation for 2000 Ford F-150
    For towing a 3,000 lb trailer with your 2000 Ford F-150 the Curt hitch part # C14355 would fit and work well as it's a confirmed fit for your truck and has a 10,000 lb trailer weight capacity as well. For trailer wiring you'd then want the part # C56031 for a 4-way. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
    view full answer...
  • Does Curt Trailer Hitch for a 2005 Ford SuperDuty Have a Specific Torque Rating for Hardware
    Yes, the proper torque setting will be stated in the instructions with the hitch. Always make sure to follow the instructions that came with your particular hitch as manufacturers will change hardware from time to time so torque ratings can vary even on the same hitch model. I have included a link to the instructions to the right.
    view full answer...
  • Class V Hitch for 1999 Ford Super Duty With Ranch Hand Legend Bumper
    The only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt # C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the F-350 the max towing capacity for the vehicle is 10,200 lbs so this hitch should be adequate. If you're still set on a Class V we have the # C15810 but I can't confirm this is compatible since it hasn't been tested. The hitch mounts in the...
    view full answer...
  • comparing Curt Class III and IV Trailer Hitches for a 2001 Ford F-150
    The main difference between the Curt trailer hitch # C14355 and hitch # 13355, is capacity. Both hitches feature a 2 inch receiver. Both hitches will fit on your truck if it has a 20 inch or smaller spare tire. But the key is the weight capacity of each hitch. The Class IV trailer hitch, # C14355, has a tongue weight capacity of 1,000 pounds, and a gross trailer weight capacity of 10,000 pounds. When used with weight distribution, those ratings increase to 1,200/12,000 pounds. Keep in...
    view full answer...
  • Will Curt Hitch Item # C14255 Mount Easily On 2001 Ford F-150
    The Curt Hitch you referenced, Item # C14355, has the same installation instructions for a 2001 or 2002 Ford F-150. Simply follow the attached instructions and the attached installation video for a 2002 Ford F-150 and you should be good to go. If you are moving the Curt hitch from one truck to the other then I recommend replacing the hardware with something like our Replacement Hardware Kit for Trailer Hitches, Item # RHK.
    view full answer...
  • 2003 Ford F-150 Trailer Hitch Recommendation
    In 1997 Ford made enough changes to the Ford F-150 that changed the hitch fits. So a hitch from a 1996 model would not fit a 2003 model. So for your 2003 Ford F-150 the Curt hitch part # C14355 would be a great option confirmed as a fit. I attached an install video for this for you to check out as well.
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Mike H
Video Edited:
Mike H
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video by:
Joshua S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<