Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded, corrosion-resistant Ford Escape trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Hands-free Liftgate option will work with this hitch. No drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , Exhaust must be temporarily lowered for installation , Heat shield must be modified or trimmed for hitch installation
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (60 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.Hitch was too large and too heavy for the box it was shipped in. Some metal ends were protruding from the box and some paint was scuffed off.
I had my mechanic do the install on my 2017 Ford Escape. End result was good and it took him 1.5 hours to install with vehicle on his lift. He said it was a little challenging.
Only 4 stars as one bolt hole didn't line up. Not sure if Draw-Tite or Ford was the issue. The Draw-Tight I put on my 2009 years ago went on perfectly.
Jenny N.
6/1/2023
It is possible that the hitch side bracket was flexed out of alignment. It can happen while in transit to you or to us. We do have a FAQ that helps show you the best way to flex it back.
Helpful Links
It was very easy to install and it worked fine. Unfortunately, we sold the vehicle since then. But I wouldn’t hesitate to buy another from you folks.
I installed it myself you really need 2 people to put it in place I had to use 2 scissor jack to be able to put it in place both sides have to go up at the same time I didn't use the instruction that was sent with it instead I watched the video that etrailer has on there website I have not installed the light kit yet
I ordered this on Tues. and today is Thurs. and the trailer hitch is sitting in my garage!!! The price was much cheaper than the dealership and was the same item. Can not thank you enough for such awesome service!
Kathy B.
7/7/2017
The installation was a huge issue since the frame was slightly bent so things didnt match up - so what should have been an easy installation was a mess - thankfully my husband knows how to fix things and managed to get it on after several tries! But now that its one it has been great!!
we found on our install the 3 5/16" washers in line 8 of instructions on both sides were not needed, we put them in and the muffler bracket holes did not line up to get the bolts in and we had it snugged all the way to the rear, thats on the drivers side,took both side washers out and everything fit fine. sorry no pictures
Brad P.
5/29/2016
not a single problem!
I have owned this for a year and it has worked great so far. Installation was a little complicated - recommend having a mechanic help you. Other than that, I would say it was worth the buy.
Item was received in record time. Looks exactly as pictured and described. Have not mounted it yet, however,after viewing the video I don't expect any problems. The only problem I have concerns the packaging. Item was received with one end protruding from the box and it had several areas where the powder coat was chipped off. I would suggest a much sturdier packing system. Other than that I am very pleased with it, Thank you.
Katrina B.
3/14/2022
Often times, hitches will receive scratches. When this happens we do want to make sure that you are able to prevent any future corrosion by covering the spotsscratches with rust-oleum type paint. I have attached an article for your reference. I will also have customer service reach out to you.
Helpful Links
Etrailer's customer service was outstanding! The hardware kit didn't have the fish wire and they promptly sent those to me. Etrailer's video made the installation so much easier. I didn't put the Escape on a lift. Instead, jacked up the rear of the car for the installation. Doesn't look the the hitch will slide in over the muffler without lifting the rear of the car. Would also recommend having a friend available for about 5 minutes just to get the hitch over the muffler. Other than that, it's a one person job! Holes aligned very nicely except for one muffler hangar bolt but a little grinding took care of that. Hitch is well made!
2015 Ford Escape Titanium.
The first unit shipped was a full inch too short, width wise(39.5" Frame is 40.5"). But after a very helpful discussion with Teresa in customer service, a new unit was shipped out and a prepaid label mailed. When the new unit showed up it fit perfectly. Tucked under the rear valance and fit right around the muffler and brackets. All the needed hardware was included. Only one slight modification to the frame was needed, just to enlarge the hole enough for the mounting bolt to fit into the frame. Not said in the directions but I recommend spraying the area with undercoating after the mod to prevent rust.
Overall good product and GREAT customer service.
I use the hitch not for towing but only to attach my bicycle rack to my Ford Escape, and it has performed well. I read through the installation instructions and decided, at my age of 80, to let my auto mechanic perform the installation. He said it was a bit tricky getting it positioned above the exhaust pipes -- not as easy as the instructions described -- but that the instructions were more complete than with many other similar products. I consider the product to be a good value for the money.
Our E Trailer hitch fit perfectly, install time was in line with instruction video (27 minutes) Do have a problem now, my wife believes I am a very good mechanic and has made a long list of things to do. My suggestion to other men would be take a nap under the car or you may also find a long list of things to do. Very Happy with our new hitch and will recommend your products to others.
Very cleverly designed. Everything you need is right in the box. However, don't be fooled into thinking this is an easy install. The video makes it look very easy because these guys have done a million of these. Plus, they have the right tools and the advantage of being able to work under a lift. I consider myself pretty handy, but it took me a good four hours to install this hitch. It took another four hours to run all the wiring and test everything before all was said and done. Give yourself lots of time and refer frequently to the videos. And by the way, kudos to etrailer.com for having such excellent support, especially in the area of instructional videos.
Nice product. The only problem I had was the hole in my bumper mount on drivers side wasn't lined up So was hard to get bolt through. Not a problem with the hitch but a manufacturer defect. Therefore took about an hour and 1/2 to install The online video was very helpful much easier than the printed instructions. Very happy with the hitch. mostly hidden. Am now in the market for a bike rack and will be looking at your racks as well. Thanks very much Ron
Great hitch, easy to install. Tow snow mobile trailer and land scape trailer easily, also great for bike rack...
My son and I (both mechanical hands on engineers) installed the trailer hitch last night on my wife's Escape. It took 2 hours. Very heavy to hold up in place. No problems but definitely not for a novice. Everything fit well and we are satisfied with the end product. Really needs better instructions and pictures.
Just as with the wiring harness I used in conjunction with this installation I have been able to put them from my mind. They have operated optimally since installation. The installation was performed without difficulty by my son and grandson.
I went with this model so it was a hidden and up off the road as possible. Took a little more time to install, but the results were worth it. It is a little on the heavy side, but then it has a heavy job to do. I am 71 years old and completed the job myself in about 3 hours with the help of a floor jack.
Hitch worked and installed as it was shown to. No problems. The wiring harness was a little tougher but we got it eventually.
Very well pleased with product and ease of installation. Arrived well ahead of estimated date. We can now use our bike carrier and pull our small boat. Very pleased to be able to enjoy these activities.
Product appears to be fine even though I have not installed it yet. However your packaging needs improvement. When it appeared at my door the box was broken in several places and the hardware was spilling out on the ground. I was able to gather it up and did an inventory. Fortunately most of the parts were there except for a few nut and washers which I had on the shelf. All is well. Thanks. RJH
The installation process was a bit of a challenge, but I watched the video and got through it without a problem. I loved the fact that other than the receiver itself everything was tucked away and virtually invisible.
Easy ordering and super fast shipping, however packaging leaves a lot to be desired. The box fell apart during transport leaving the hitch already scratched and injuring my hand and arm when I picked it up and did not see that it had fallen through and ripped the box.
Although I was not in a hurry for my hitch receiver, I was informed on the status of my hitch, the people that were involved with my order and delivery. The hitch receiver arrived promptly and in good condition. A very good company to deal with, one that should be a model for some of the others I have dealt with to follow.
I love this! It has helped me tow both my bikes, and my jet ski last summer and now this summer. Have had no problems at all. Highly recommend Draw-tite
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Douglas S.
8/10/2024
I do like the hitch for the bike rack that I purchased. It fits nicely under my 2017 Ford Escape.