Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

See what our Experts say about this CURT Trailer Hitch

• Recommended Hitch for a 2023 Ford Bronco Sport
  To add a hitch to your 2023 Ford Bronco Sport, I recommend the etrailer Hitch item # e57KR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because the main crosstube mounts behind your Bronco's bumper cover. This leaves only the 2" receiver visible which not only looks better but also helps with ground clearance. I have attached a couple of pictures below along with an installation video...
  view full answer...
  
• Difference Between Curt & etrailer Trailer Hitch Receivers For 2022 Ford Bronco Sport
  Good question, and there is just one difference between the Curt and etrailer trailer hitches that fit your 2022 Ford Bronco Sport, and that's their finish. The Curt hitch has a glossy black finish while the etrailer hitch has a matte black finish. The correct part numbers for the hitches that fit your '22 Bronco Sport are the following: - etrailer Trailer Hitch Receiver # e57KR - Curt Trailer Hitch Receiver # C76HR The matte black finish is nice as it hides the inevitable dings, scuffs...
  view full answer...
• Best Trailer Hitch and Wiring Harness for a 2022 Ford Bronco Sport
  Yes, we do have a trailer hitch for your 2022 Ford Bronco Sport it is the Curt Trailer Hitch Receiver item # C76HR. This hitch is custom fit and bolts directly to your Bronco's frame with included hardware. It has a maximum trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. We had a 2021 Bronco in our shop and I have linked a couple of pictures below and an installation video so you can see what this hitch will look like once installed. To control your trailer's lights...
  view full answer...
  
• Comparing Curt, etrailer and Draw-Tite Trailer Hitch Receivers For a 2024 Ford Bronco Sport
  First the only difference between our etrailer Receiver # e57KR and the Curt # C76HR is the finish. We have Curt manufacture our receiver in a matte black finish rather than their gloss finish. Personally I feel the matte finish looks better and these hitches are much easier to install than the Draw-Tite # DT93MR. The Draw-Tite will require you to remove the rear bumper fascia and impact structure which most people would find difficult. So I would recommend our etrailer Receiver # e57KR...
  view full answer...
• What is the Best Hitch for a 2024 Ford Bronco Sport?
  The best hitch for a 2024 Ford Bronco Sport is the etrailer item # e57KR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the etrailer hitch item # e57KR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. I have attached a couple of...
  view full answer...
  
• Recommended Hitch for a 2024 Ford Bronco Sport?
  To add a hitch to your 2024 Ford Bronco Sport, I recommend the etrailer item # e57KR. This hitch is custom fit and bolts to your Bronco Sport with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight. I really like the etrailer hitch item # e57KR because the crosstube mounts behind your rear bumper leaving only the 2" receiver exposed. This not only looks better but helps with ground clearance. If you are...
  view full answer...
• Recommended Trailer Hitch And Wiring For A 2023 Ford Bronco Sport
  For a 2023 Ford Bronco Sport I recommend the Curt Trailer Hitch Receiver # C76HR. The installation is super easy, but will require you to slightly notch out the fascia a bit to fit the receiver tube. I've attached a short video below where the Shane will walk you through the process. If you plan on towing a trailer then you'll also need at minimum a 4-pole wiring harness. For this I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C47WR. This...
  view full answer...
• Curt vs. etrailer Trailer Hitch For 2024 Ford Bronco Sport
  One difference exists between the Curt and etrailer trailer hitches for your 2024 Ford Bronco Sport, and that is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black finish, so you can choose which you prefer. The hitches that fit your '24 Bronco Sport are the following part numbers: - etrailer Trailer Hitch Receiver # e57KR - Curt Trailer Hitch Receiver # C76HR The matte black finish does hide those inevitable scuffs and scratches better than...
  view full answer...
• Trailer Wiring Harness Fit For 2021 Ford Bronco Sport
  We do have a trailer wiring harness that fits your 2021 Ford Bronco Sport, which is the following part: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR This harness is manufactured by Tekonsha, who is known to make the most reliable trailer wiring harnesses in the industry, so it's going to provide you with the best way to power your trailer's lights. It does store in your Bronco Sport's rear cargo area when you aren't using it, so you don't need a mounting...
  view full answer...
• Recommended Trailer Hitch Receiver and Wiring Harness For Trailer Towing With 2022 Ford Bronco Sport
  I recommend the Curt Trailer Hitch Receiver # C76HR for your 2022 Ford Bronco Sport. This is the easiest receiver to install as it bolts to the frame rails rather than having to remove the rear fascia from your Bronco as other receivers will require. It has a tongue weight capacity of 525lbs and trailer weight capacity of 3,500lbs, be sure to not exceed any weight capacities given by Ford for your specific Bronco. The Tekonsha T-One Vehicle Wiring Harness # TK46FR will give you a 4-way...
  view full answer...
• Trailer Hitch Receiver For 2021 Ford Bronco Sport
  We do have a trailer hitch receiver that is a fit for the 2021 Ford Bronco Sport, and I verified with the manufacturer that the correct fit is the following: - Curt Trailer Hitch Receiver # C76HR The hitch is a complete bolt-on installation as well, so no drilling into your Bronco Sport's frame is needed. I have added a link below to the installation instructions for you to take a look at so you can see how simple the installation process really is. The only other thing I wanted to mention...
  view full answer...
• Curt vs. Draw-Tite Trailer Hitch Receiver For 2021 Ford Bronco Sport
  Good question, and there is one significant difference between the Draw-Tite Max-Frame Trailer Hitch Receiver # DT93MR and the Curt Trailer Hitch Receiver # C76HR that fit your 2021 Ford Bronco Sport, and that is the installation. Due to how different the install is, I highly recommend going with the one that is much easier, which is the Curt: - Curt Trailer Hitch Receiver # C76HR The Draw-Tite requires you to remove your tail lights, bumper fascia, and bumper beam to install, while...
  view full answer...
• Comparing Curt and etrailer Trailer Hitch Receiver for 2024 Ford Bronco Sport
  There is no difference in the quality or the material used to make the Curt # C76HR and etrailer # e57KR. The hitches have the same design and installation process. They also have the same max gross trailer weight of 3,500 lbs and max tongue weight of 350 lbs. The only difference between the two hitches is the powder coat finish. The Curt has a glossy finish while the etrailer hitch is matte black. I prefer the matte finish since it tends to look better while helping to hide dirt and...
  view full answer...
• Is the Curt Trailer Hitch Receiver Fascia Trim Diagram Correct for 2022 Ford Bronco Sport
  The instructions for the Curt Trailer Hitch Receiver # C76HR provide a diagram showing where to trim the fascia. There is no actual template to follow, so correctly marking and cutting the fascia is ultimately up to you. Looking at the installation video and pictures we have, the fascia appears to be properly trimmed with the receiver fitting nicely in the center. I would make sure to follow the diagram as closely as possible when marking the fascia and use a rotary tool for cutting. I...
  view full answer...
  
• Trailer Hitch Receiver and Wiring For Towing a Utility Trailer With a 2021 Ford Bronco Sport
  The Curt Trailer Hitch Receiver # C76HR is confirmed to fit all trim levels of your 2021 Ford Bronco Sport, including your Badlands trim. It is capable of supporting up to 525lbs of tongue weight and towing 3,500lbs of trailer. Be sure to consult your Ford dealer for your towing capability and use the lower of these 2 numbers. While most any company can install this receiver you should make sure you use a reputable installer. You can search for an installer on Curt's website to see who...
  view full answer...
  
• Comparing etrailer and Curt Trailer Hitch for 2024 Ford Bronco Sport
  The only difference between the Curt # C76HR and the etrailer # e57KR is the finish. Outside of that, they have the exact same design and capacity. The Curt has a glossy finish while the etrailer hitch has a matte black finish. I prefer the matte finish since it gives it more of an OEM look on a vehicle like your 2024 Ford Bronco Sport. It also helps hide dirt and dings. I have attached an installation video below for your reference.
  view full answer...
• Trailer Hitch Receiver And Wiring Harness Fit For 2021 Ford Bronco Sport
  We do have a Class III trailer hitch receiver as well as a trailer wiring harness for your 2021 Ford Bronco Sport, and you are on the money with the two parts that will fit, which are the following: - Curt Trailer Hitch Receiver # C76HR - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR The wiring harness will store inside the rear hatch so you won't need any type of mounting bracket, and the Curt trailer hitch is a simple bolt-on installation; I have added a...
  view full answer...
  
• Recommended Trailer Hitch Receiver and Wiring for Towing With 2022 Ford Bronco Sport
  For towing with your 2022 Ford Bronco Sport I recommend the Curt Trailer Hitch Receiver # C76HR. This is a custom fit Class III hitch with a 2" receiver. It features a concealed cross tube which will help maintain a factory look. This hitch has a maximum gross trailer weight of 3,500 lbs and max tongue weight of 525 lbs. For wiring, the most reliable choice is the Tekonsha T-One Vehicle Wiring Harness # TK46FR. This plugs directly into your existing wiring using the T-One connectors. Once...
  view full answer...
  
• What 4-Way Wiring Harness and Hitch Do You Recommend for My 2022 Ford Bronco Sport?
  For a great 4-way wiring harness that fits your 2022 Ford Bronco Sport, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR. This harness comes with a superior converter box than the Curt models such as the # C47WR. If you need a hitch receiver to complete the towing setup, I recommend the Curt Hitch - 2" # C76HR. The Curt not only provides you with 525 pounds of maximum tongue weight and 3,500 pounds of gross towing weight, it also comes with an amazing...
  view full answer...
• Do I Need to Cut Wheel Well Panel to Install Curt Hitch on 2022 Ford Bronco Sport
  Great question! When we installed the Curt Hitch Receiver # C76HR on the 2021 model Ford Bronco Sport (see attached) our installer ended up just tucking that wheel well panel up next to the frame rail instead of cutting it (see video starting at about 4:00 minute mark). Shane is a great installer and I really like the work that he does so since he just tucked it up by the frame that's what I would do. You're more than welcome to cut it if you'd like, but tucking it up under the vehicle...
  view full answer...
  
• Trailer Wiring Harness Fit for 2022 Ford Bronco Sport
  For the 2022 Ford Bronco Sport, I'd recommend the Tekonsha # TK46FR trailer wiring harness. The unit plugs inline at the connection between the taillight assemblies and the factory wiring harnesses. You'll also need to run circuit to the positive battery terminal to power the taillights. I'll link to a help article that explains how to run that circuit to the battery. If you don't have a hitch yet, I'd recommend the Curt Class III hitch, part # C76HR. You'll also need a ball mount like...
  view full answer...
• Are Extra Bolt Leaders Available to Install the Curt C76HR on a 2021 Bronco Sport
  We definitely have extra bolt leaders if you need more than what comes with the Curt # C76HR. With that being said, as this uses 1/2-20 carriage bolts, you will need the # C58400. These are designed for 1/2 bolts and are 18 inches long.
  view full answer...
• Where To Put Wheel Well Panel On 2021 Ford Bronco Sport When Install Curt Trailer Hitch C76HR
  When we installed the Curt Trailer Hitch Receiver # C76HR on a 2021 Ford Bronco Sport like yours you are correct that we did not cut the wheel well panel off. There is not a way that we found to reattach it, and just stuck it up behind the frame rail as you can see at the 4:15 minute mark of the included install video. With the hitch being bolted onto the frame rail right next to it, it keeps the wheel well panel from being able to move out of place. If you want you may be able to find...
  view full answer...
• Class III Trailer Hitch that Fits 2022 Toyota Venza
  We do have a hitch that fits your 2022 Toyota Venza with the Curt # C76HR but at this time the Draw Tite you mentioned has not been officially carried over to the 2022 model.
  view full answer...

Do you have a question about this Trailer Hitch?