To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (247 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.Install was very simple, came with good quality strong hardware. I’ve used it many times over the past year. it looks factory on my rav4. I did have to cut a notch into the plastic guard under my bumper to make it look better but I have 0 complaints.
The Draw-Tite instructions claim a 20-45min install time. Maybe a NASCAR pit crew could install it in that time but the average guy will take much longer. The first Draw-Tite hitch I received was welded off center and did not fit. etrailer made an exchange with no hassle. The second one was a better fit but had poor looking welds and paint job. They didn’t even bother to scrape the weld spatter off before painting. I am not at all impressed with Draw-Tite’s quality and would definitely try a different brand if there was a next time. I stripped two of the holes torquing the bolts to 75 ft-lb and had to tap from 12mm-1.25 to ½-20. The instructions show zip tying the smart key antenna to the bottom of the hitch tube. I thought this was a poor solution and made my own bracket to relocate it. I would order from etrailer again but will not install another aftermarket trailer kit if I can help it.
The directions were clear and concise, and the hitch was easy to install. I used my motorcycle jack to lift the hitch into place to line-up the bolt holes.
I use the hitch to mount my bicycle rack. It looks good, and appears well-made and rugged.
Excellent product!
I want to confirm that this hitch fits on my 2007 RAV4. I took a chance on ordering this hitch because it had not been confirmed to fit this year and I preferred the hidden bar version. As it turns out I don't think it is probably any tougher to install on this model year than any of the newer confirmed years. That being said, I did remove the bumper cover as I wanted analyze every step to make sure it was going to work. It did take most of a day to install but half of that time was spent cleaning up the threads of the previously unused holes required for the hitch attachment. A word of advice here is that if you don't have access to a tap to clean up the threads, take your time before actually installing the hitch to make sure that the bolts will thread all of the way. It took a lot WD-40 and multiple (maybe 10 to 15) attempts to get further and further. You only want to go so far and then back off (or out) and then spray and go again. This process would have been required for my situation no matter which hitch I was installing. After that, the installation went fairly smooth. To me it was worth the effort as it looks as good as a factory installation. Oh yeah, I did this review because I have the V6 which pulls my 18ft boat effortlessly and thought there would be others wanting to use this hitch.
Excellent hitch for wife's 2015 Rav 4. We like that the bar is hidden beneath the bumper cover which also gives extra ground clearance. Has a nice factory look when installed. A little extra work to clearance trim the bumper cover & factory splash guards after installation but well worth the extra effort. Etrailer is excellent, best prices, had hitch in less than 48hrs. & their installation videos & customer service made this a very straight forward installation. I will be doing business with Etrailer again!!!
Sean Z.
7/27/2020
Hitch still looks as new after a Chicago winter & is working flawlessly!
Worth the extra work!
This hitch looks so much more clean then any other hitch. I bought a curt brand hitch for my rav at first and it showed so bad. This one all the hardware except the tongue is hidden in the bumper! The biggest pain was cutting the panels. Which is optional except for the base of the bumper. I used some door edge moulding I had left over the clean up the spots i had to cut on the bumper and it looks so much better that way. Also if you have a limited model you have to unscrew the keyless entry antenna and the instructions say you need a 12mm ITS WRONG you need an 11mm it took me forever to get that off struggling to find the right size and it's in a tight spot to get it off. It's worth the hard work for the clean look! I put the curt brand plug and curt wire mount on it and they both work great!
Taylor B.
9/12/2019
Still works absolutely fantastic! I towed my tear trailer with it this summer and it had no issues with it! I plan on buying the equipment to install trailer brakes into my tear that are made by etrailer here shortly as I am thoroughly impressed with the quality!
Just bought the hitch not long ago so haven't fully tested it yet other then put a bike rack on it. This will be the main use.The hitch looks really good on the car. It also sits up really high, so really helpful when you back up from a steep driveway. Instillation look some time for me. The instillation video is rally helpful. Just make sure that you have a "Nylon or metal tube brush" for cleaning the dust in nuts that are already pre-drilled in the car. In my case I needed a metal tube brush because of the rust. You can purchase these for around $5 - $6 at a local hardware store. Great hitch though, that looks really good.
Endri
7/24/2021
The hitch has been great after the first year of use!
Hitch came damaged and it is not a new hitch! It was already been used and returned. I am returning the hitch including all the accessories.
Very happy with purchase , love the idea it was hidden within the rear bumper. Great price and hook- up was well wrote and easy to follow. Wiring the hitch was also easy to follow.
Two thumbs up
Paul
3/4/2020
Best product bought still looking good it’s anchor points gives full support . It is hidden up underneath the bumper so it is protected. Would buy again if needed.
etrailer is a five star site, from videos to easy searches for guaranteed fit. The draw-tite hitch receiver gets 4 stars though. The fit was great, but like others the paint was chipped in lots places. Used rustoleum to touch it up.
Excellent fit on our 2017 Toyota Rav4 AWD, all bolts lined up to the frame, but it required a lot of time trimming the plastic under body panels.
I made a tool to reinstall the trim panel clips, this helped to avoid removing the bumper.
Package arrived with the top torn open, UPS driver handed the box to me and I feared the worst, but all of the hardware was there.
Thanks to (Gorge J.) and the crew at "etrailer.com" for protecting the contents!
The 76134 hidden hitch looks nice on our new Rav4, we are ready to hit the road!
TN Hunter.
Love it -- especially how it's mostly hidden. I borrowed a torque wrench and installed it myself without too much trouble. Definitely get a friend to help. I had no friends that day but was able to do it alone with the help of some cinder blocks and books used to support the weight of the hitch while getting it in place.
It's heavy and definitely drops the suspension a bit on my 2018 Rav4 Hybrid. I bought some air bags for the shocks to fix that; haven't installed those yet.
I wanted a Class III trailer hitch for our bike rack for our 2016 RAV4 and it was extremely easy to search for the available hitches and see the reviews. What I really like about etrailer are the videos that review the different types of hitches and options for particular makes/models of cars and there are pictures to view. I went with the Draw-Tite because we have the same brand on our other car and the one I bought tucks under the rear bumper so it has a very clean look and you only see the hitch. I had our mechanic install it so I can't comment on that, but the mechanic said it was pretty easy to install and he did not have to lower or remove the rear bumper (there are a lot of sensors on cars attached to bumpers these days...) so he charged me an hour of labor. The etrailer price and cost of installation was much cheaper than buying from a dealer. Very happy with etrailer and the purchasing process.
Hitch fits our 2013 RAV4 nicely. Only the box receiver shows below the bumper. Easy install. Have only used it for a bike rack so far.
Outstanding service from etrailer.com though. UPS lost the first hitch and I was up against a time crunch before leaving on a trip. Emily at etrailer rushed another hitch to me that arrived in time for me to install before our trip.
I really like the Draw Tite class III 2" custom fit hitch for our 2018 Toyota RAV4 XLE. It looks like it was factory installed. You only see the reciever, not the cross beams. I installed the hitch by myself using jack stands to prop it up while I bolted it on. I had to cut the rear fascia on bottom of vehicle 1 1/2” deep by about 3" wide. Instructions said 1" x 2", but it would have been too small.
I did have to remove the rear keyless entry antenna under the rear fascia per instructions with hitch. It was just 2 screws and came with 2 zip ties to re-attach to hitch cross beams. (The 2017 installation video on etrailer did not mention this. But I have a 2018.)
I am only using the hitch for a bike rack, no towing. (Glad I went with this hitch as opposed to Curt class II 1 1/4" which requires you to strap bikes and bike rack to the rear hatch of vehicle.)
The box looked like it was hit by a train all torn and ripped and open. The UPS guy helped me remove the hitch to make sure it was okay. Only a few minor scuffs on the cross beam of hitch which can't be seen.
Very happy with the hitch. You won't be sorry if you purchase this hitch!
I just finished installing 76134 Hitch on a 2018 Toyota RAV4 LE Hybrid. I really appreciated the video (red 2017 Toyota RAV4 LE) and other comments. That guy in the video is impressive. I had three differences from the video 1st) The tie down bracket required my torque wrench to loosen. It was on there and my drill would not cut it. 2nd) The keyless entry antenna was in the way. It is right under the bumper on the passenger side middle. The instructions talk about it but the video doesn't. Maybe some cars don't have it. Either way I removed it with a 10mm wrench. I also removed the bracket that attaches to it and when I was done reattached it with tie downs provided and according to the instructions. I did not have to remove the bumper fascia See photos. 3rd) The largest trim panel on the driver side, I had to trim a touch more than in the video to get it to fit. Overall I'm thrilled with this product and the look.
Shipping was fast, the hitch arrived three days earlier than promised. Installation was straightforward, the on-line videos were excellent help. The hitch fit very well, all the holes lined up and the bolts went in.
These hitches are heavy and awkward. I used my engine hoist to carry most of the weight and still needed another set of hands to swing it up into position so I could start the bolts. I had to get it past the exhaust system, so having someone on the other side was a huge help. Once I had a bolt in each side it went easily from there.
It looks great once installed and works just as expected.
It fit fine. It was a little awkward getting it all to line up but once I got it into place it all fit fine. To fit this on the 2010 RAV4 I had to cut a square out of the bumper cover. (See picture) I like that it’s tucked up a little higher than the standard hitch. I haven’t had it scrape anywhere unlike previous car/hitch combinations.
Installed on a 2018 Toyota Rav4.
Instructions were a little tough to understand but if you have some basic mechanical knowledge you can figure it out. There are a couple of steps on the instructions that were not necessary to complete this install. They wanted you to remove a piece of fascia that was not required. I only had to trim one piece of fascia and that was pretty simple, I just used a dremel. I installed this on my own and it was a little difficult trying to lift the hitch in place and start the bolts but I was able to pull it off. It took me about an hour to install this and a some basic tools. I bought this receiver hitch so I can utilize my motorcycle receiver hitch hauler. I chose this hitch due to its hideaway crossbar. I didn't want to look at the back of my vehicle and see this receiver hitch bar hanging down and this product does a good job of hiding that.
This was installed on my 2016 Rav4. The installation was straightforward and pretty easy. The only issue I had was with installation of the passenger-side bolts. My car is relatively new but I'm in the Northeast and there is NO WAY those bolts were going into any frame bolt holes that didn't have anything in them before. If you're in the same situation, do yourself a favor and run a 12mm tap through the holes before you start the install. I was putting in the hitch by myself so I'm under the car holding up the hitch frame with my leg like a maniac trying to quickly start the bolts so I could let it go, this is not the way to do this. Once I chased the threads out everything installed super easy. If you have a rotary tool trimming the fascia and the undercarriage plastic pieces is a breeze. Once installed this hitch looks great, it's barely there, no visible crossbar looking ugly or getting caught on things.
The 76134 receiver is well made. All weld beads are continuous and consistent and the material is sized right for adequate strength and minimum weight. Mounting bolt hole pattern is right on. Paint is good and consistent with no dings or scratches. Installation was straight forward. It was necessary to procure a M12 X 1.25 tap to run through the mounting weld nuts in the frame in order to get the bolts to thread in; not a fault of the receiver but the effects of four years of over the road use of the 2015 RAV4. Also the small amount of extra money for this hidden crossbar version of a receiver was worth it when looking at the final installation.
The 118578 T-One harness kit installation was also straight forward and it works as it should. Installation was made a little less difficult with the use of the ALL648544 trim pad remover that was purchased with this order.
John D.
6/5/2020
It has been fine, no issues. Ive only used it once to pull a utility trailer with a small motorcycle on it for about 200 miles so it hasnt had a lot of use. I am still very pleased with it.
John D.
6/5/2020
It has been fine, no issues. Ive only used it once to pull a utility trailer with a small motorcycle on it for about 200 miles so it hasnt had a lot of use. I am still very pleased with it.
Excellent customer service at eTrailer.com!!! I ordered the hitch, then decided to add a Yakima bike rack to my already completed order. Brenden at eTrailer quickly edited my order, and then shipped it that evening! Very quick turnaround and delivery of my order.
The Draw-Tite Custom Class III hitch fits my 2017 Toyota Rav4 perfectly! The description, installation video, and photos on eTrailer are very accurate to the look and fit of this model.
The Yakima rack is solid, and was easy to assemble in about 15 minutes with all the required tools included in the box. I love that the rack tilts down to allow access to the rear hatch, and has built in security locks for both bikes, and the hitch itself.
Looks to work as it should paint quality was sub par and it did not come with good installation instructions
Jenny N.
10/26/2021
I will have our customer service team reach out to you. I would recommend touching up the hitch with a rust resistant paint which you would then have on hand for hitch maintenance. I would also like to recommend watching the video installation video link below on a 2015 Toyota Rav 4. It will be the same install as on your 2014 Toyota Rav 4.
Helpful Links
Excellent draw tite hitch. Love the way its completely hidden. Installed on Toyota Rav4 2015 XLE AWD. Got a 5X8 Aluma trailer, only weighs 350 lbs so have lots of weight left to haul. Easy installation and excellent video. Also the wiring was fantastic. Etrailer is the only way to go.
This concealed hitch is a little more trouble to install, but worth the effort. Everything fit perfectly and holes aligned. A Video would have helped, as i had trouble understanding what was what in the written instructions, but maybe my pictures will help somebody else.
You remove 2 screws and a bolt from each side and two bolts you can see if you zoom in, on each side in the back( they are hidden by the liftgate until you open it. Then you can easily remove the back panel (we used to call it a bumper??) by gently lifting and pulling. I didn't disconnect the wiring harness, just supported side. I still need to cut out some in the plastic panel underneath, on the passenger side, to fit around the round bar, which is up high due to the "hidden" look. Hope the pics help.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Philip D.
7/19/2018
After a year all is good. Use it to pull my 18 ft boat approx. 2500 lbs.