bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class V
  4. 2 Inch Hitch
  5. 12000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"
Draw-Tite

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"

Part Number: 41948
In Stock
$221.45
Retail:$435.99
You Save: $214.54
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" part number 41948 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (283)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 41948

  • Class V
  • 2 Inch Hitch
  • 12000 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 1500 lbs TW
  • 15000 lbs WD GTW
  • 1500 lbs WD TW
  • Custom Fit Hitch

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Fully welded steel construction with computer-aided design ensures strength and durability
    • Heavy-duty side brackets and wiring connector mounting bracket are also welded on
  • Reinforced, cast center section ensures the highest tongue weight capacity possible
  • Oversize safety-chain loops are easy to access
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 15,000 lbs
    • Maximum tongue weight: 1,500 lbs
      • Maximum TW when used with weight distribution: 1,500 lbs
  • Limited lifetime warranty


Ultra Frame Design with Cast Center Section

Specifically designed for a serious towing machine, this rugged trailer hitch receiver features the strong, durable construction that your heavy-duty applications require. The secure side-bracket design and all-frame attachment system ensure maximum stability. The cast center section lets you pile on the tongue weight without any worries. And the reinforced pin hole and large safety-chain loops better accommodate your heavy-duty towing needs.


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real-life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41948 Draw-Tite UltraFrame Class 5 Trailer Hitch Receiver with Cast Center

Installation Details 41948 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2" - 41948

Average Customer Rating:  4.5 out of 5 stars   (283 Customer Reviews)

Ideal for heavy-duty towing, this vehicle trailer hitch has a cast steel center that is designed to handle hefty tongue weights. Tested Tough guarantee ensures that this durable, corrosion-resistant hitch exceeds industry standards.

by:

This is a heavy duty hitch receiver! I was able to install it by myself, but I had to use two straps to hold it in place…. And getting it in the installation position took some effort… whew! Needless to say, easy enough to install and a perfect fit on my 2022 Ram 1600 Classic- Regular Cab- Short bed.



by:
2019 Ram 1500 Classic

couldnt get one crossmember bolt in didnt fit between frame corectly

Etrailer Expert

Jenny N.

10/12/2023

I am wondering if the hitch side bracket is flexed. Would you be able to send a picture of where the bolt is? If it is flexed, I do have a FAQ that can help move it back into alignment.

Michael

10/11/2024

A bolt on the frame didnt fit had to use one smaller that fit in the hole



by:
2022 Ram 1500 Classic

Shipped/arrived super quick.arrived bent .easily corrected.good alignment with factory holes.quality hardware and installation video .no factory bumper removal needed for installation.2022 ram1500 classic crew cab.



by:
2020 Ram 1500 Classic

Garbage! This thing was a nightmare to install. It took 2 floor jacks and a dead blow hammer to get it in place, only to find that It was tweeked horribly. If your on a budget, get it. Just know you will need to grind all the holes bigger to make it fit. They will say it’s from metal movement, but that’s BS. It’s poorly packaged. There is no foam to protect the hitch at all. It’s only the cheapest cardboard China has to offer. Upon receiving the hitch the box looked like it had been attacked by a T-Rex. If I hadn’t needed the hitch when it was delivered, I would of sent it back. I gave it 2 stars only because it was cheap.(you get what you pay for…..)

Etrailer Expert

Jenny N.

3/4/2022

I will have our Customer Service team reach out to you. It sounds like that the side brackets were knocked out of alignment which can happen while in transit to our facility or to you. We do have a FAQ that can assist with moving the side brackets of the hitch back into alignment to allow for installation. I also recommend touching up the hitch with a rust resistant paint which you will have on hand for regular hitch maintenance.



by:

Easy installation if everything cooperates. It would be difficult for a single person laying on the ground. Also make sure you spray some sort of lubricant on your bolts that go through the frame. I broke the welds on the welded nuts inside the frame on two of them. Had to burn them off of the torch and fish new bolts into the frame. Also don't Yank on the wires that thread onto the bolts to make them out of shape. They won't fit through the holes if you bend them. Other than a few little problems on my end, everything with the hitch lined up perfectly. It's a nice heavy hitch.



by:

It took a bit of doing, which was more an issue with my specific truck, but with some extra 'oomph' we were able to install this hitch in a relatively short time. Am important addition to my vehicle, at a reasonable price point. Ordering and delivery were both quick and painless. I'll order from you guys again when the need arises!



by:

I gave this hitch a 5 star rating, this is for the hitch itself.
The install was greatly added by the use of the fish wires for the bolts.
It took about 3 hours to install this hitch, the fit was extremely tight,
with a floor jack under the hitch and almost picking the truck off the floor
it still took a 4# hammer and a block of wood to persuade the hitch into the frame
after loosening the upper bumper crossmember bolts, the rearmost factory bolts then took two pry bars and four hands to get the last bolt started. Once finally started the bolts pulled the hitch up into position and swaged the hitch into the bumper braces.
The hitch seems to be well built and heavy duty the only problem is the alignment of the two rearmost holes and the extremely snug fit.
The hitch also looks good after the installation was complete, I didn't get a picture of the installed hitch, this was on my son inlaws pickup.



by:

The fitment was tight and snug, the use of a rubber mallet and a second set of hands is necessary. Construction is very stout and well built. My hitch arrived with some scratches to bare metal in the paint finish, kind of unfortunate since they were on the outside where they'll probably show rust soon. The two middle holes mounting to the framerails did not line up, I had to use a carbide grinding bit to widen the holes in order for the bolts to line up and thread in. With that added time, It took about 45min to complete. Fishing the carriage bolts through the frame was not hard at all. This overall fit well and will allow me to pull a trailer with my '12 Ram 1500 ST.



by:
2017 Dodge Ram Pickup

Easy install thanks etrailer! Simple, extremely quick shipping and follow up. That's great customer service. Few simple tools 19&21mm sockets ratchet and torque wrench and about 1.5 hrs I had hitch and brake controller installed in my 2017 ram. I used a little anti seize on all bolts.



by:

With the simple to follow instructions this hitch will be a snap to install!

Charles

12/30/2023

Good rugged hitch with fantastic weight for tongue and towing!



by:

This hitch is a little bit more rugged than what i will probably need, but I’m glad I bought this one. Shipping was right on schedule. A few minor scratches in the paint but I blame the delivery driver. Hitch was slightly bent from being tossed around during delivery so it took a little bit of maneuvering to line the bolt holes up. Once lined up it went in easy. Probably around 1.5 hours for install time. 19mm and 21mm sockets. Pull wires definitely made it a lot easier. Video explained installation perfectly. Looks great on the truck, have not tried it out yet but I can’t wait to! I’ve bought a few products from etrailer and I’m happy every time. They know their stuff. I would definitely recommend this site to anyone!



by:

Love the receiver hitch. It was not that hard to put on and it looks great too..Will be pulling open and enclosed trailers. I submitted a picture of the hitch installed.

Thanks again Adam and Stacey for everything.



by:
2016 Ram 1500

The Draw Tite Ultra frame is a beautifully made trailer hitch and very beefy. It looks great and fits perfect. Though it is an Extremely tight fit and took two people to install it about 45 minutes. Highly recommended.



by:

etrailer.com was very helpful with the specifications for trailer hitches, and sent their recommended hitch to us very quickly.
*** Installation was a nightmare. ***
When we first tried to install it from underneath, none of the holes could be aligned. We removed the bumper, and the rear cross-member (that the bumper was bolted to), so that we could assemble it on the ground before putting it in, and it still needed modification. Putting the bolts though with a string as instructed was not a simple task, but it was the easiest part of this installation. The instructions are vague. Once the assembly was put back into the truck, 4 of the remaining holes needed to be modified (the furthest forward in the truck and the middle holes).
It hard to understand how Draw-Tite got the holes to be mis-aligned this much.
It took a day of grinding and some pry bars to get it in.
If I didn't need it soon, I would have sent it back.
The hitch does look and feel strong now.



by:

Good product heavy hitch. Box was damaged but seemed ok. difficult to install alone two people install for sure. Fits very tight needed a big hammer to help into place maybe a little damaged during shipping who knows.

Etrailer Expert

Sierra K.

11/1/2021

It may have been a bit flexed which is a common occurrence in hitch receivers. I am glad that you got it installed.



by:
2019 Ram 1500 Classic

Hitch went on great after some slight persuasion with a pry bar to line up the factory holes. I thankfully had an impact wrench on hand which made installtion that much better. All in all it took me about hour that from the time i started dropping the spare tire to securing the spare tire. Feels very strong fit nice and snug. The fish wire for the bolts was really handy!



by:
2014 Ram 1500

Shipping was a little sketchy, as you can tell from the photo. Not etrailer’s fault...looks like the shipping company didn’t even slow down when they delivered it. Either way, all the parts/hardware were present. Pretty easy install and it seems solid. Haven’t hauled anything yet but I don’t think it is going to be an issue with this thing. Took a little longer than expected, mostly bc I did it alone. Watch the [online] install video. Helped a good bit.



by:
2017 Dodge Ram Pickup

I have a 2017 Dodge Ram 1500. This is the hitch that I’ve been looking for to tow my toy hauler Instructions was easy to read I put the hitch on all by myself it’s a perfect fit can’t wait to try it out. I would recommend this hitch to anybody that’s looking to buy a hitch it is definitely what the picture shows it’s totally heavy duty



by:
Dodge Ram Pickup

The hitch is well made serves its purpose well however, intstallation on a 2022
Ram was more than could be performed in the driveway. Insallation was finished on a lift with a 5# hammer.



by:
2016 Ram 1500

Love this draw tight !!!
Very easy
to install , only took me about 30 minutes and that was because I had to locate my tools that someone had barrowed without my knowledge lol..
This will help save my bumper and tag from being damaged from my trailer tong also ..



by:
2021 Ram 1500 Classic

I rarely do a review, but I need to bring this to your attention. The hitch seams very well built but the way the holes lined up with the M-14 bolts lined up with hitch to truck frame was a big challenge! Unless the hitch was bent in shipping (the box was torn and taped up) then you need to fix this. After I was able to start the bolts that you provided with only a little difficulty. I had to use a large pry-bar to rack over your hitch so I could align the holes in the truck frame to reinstall the M-14 bolts. Even with this 2 of the 4 M-14 were cross treaded. So, I had to use a very large power handle to force these bolts tight. The spare tire was not much of a problem or in the way with the install. I have done labor in construction for 40 years, maintenance work and just installed a water pump on my truck. So, I'm not without experience. This took me 4 hours to install...not reasonable. KS

Etrailer Expert

Brooke M.

4/17/2023

Thank you for your concern! It is not uncommon for hitches to be flexed from the shipping process. It sounds like you were able to muscle through and get er done. We do have an article for straightening flexed hitches if this should happen again in the future.



by:

Very strong and a good fit, a line up pry bar is a big help because it is a tight fit to line up those holes. Hitch is not very intrusive and it tucks nicely under the bumper. Very happy with it and it took me about 50 minutes to install and I didn't even skin my knuckles lol.



by:

Fast shipping and easy install! Installed in on my 2016 Ram 1500. Just followed the video and had it on in about an hour. Pretty tight fit just had to shimmy it in there for a second then went right into place. A second pair of hands makes it so much easier. Possible alone if you have some stands to hold it in place I guess. Really happy with it, looks clean!



by:

Does the job! This is my third purchase from etrailer and it has been as advertised each time!



by:
2019 Ram 1500 Classic

Fit of part was almost not going to work with my vehicle. Part arrived at my house in poor packaging. Once part was attached to vehicle it is perfect.


25
283
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Aftermarket Trailer Hitch Fits for 2012 Ram 1500 with Factory Hitch
    All of the hitches offered for your 2012 Ram 1500 are for the versions of the truck without a factory hitch. All of these hitches, shown on the linked page, require you to remove the factory hitch. The available options include 2-inch hitches in Class III, Class IV and Class V ratings, such as Draw-Tite # 41948 and # C15572 which are Class V. Both offer no-drill installation as shown in the linked video.
    view full answer...
  • Trailer Hitch for 2016 Ram Tradesman 1500
    I recommend the Draw-Tite 2-inch hitch # 41948 for your 2016 Ram Tradesman 1500 that does not have a factory hitch. This hitch is rated for 1500-lbs of tongue weight and a maximum of 12K towing weight and it offers no-drill installation as shown in the linked video. The written instructions are also linked and these show how the hitch mounts under your round cross member.
    view full answer...
  • Will the Draw-Tite Hitch 41948 Fit a 2019 Ram 1500 Classic Warlock Special Edition
    The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41948 is a fit for a 2019 Ram 1500 Classic Warlock Special Edition so long as you don't have a factory trailer hitch. The Draw-Tite hitch offers a complete bolt-on installation with heavy duty towing capacity of 12,000 lbs. If you don't already have a trailer wiring harness, the 7- and 4-Pole Trailer Connector Socket part # HM40975-11933 fits into the factory bumper cutout.
    view full answer...
  • Can Trailer Hitch from 2005 Dodge Ram Be Installed on 2016 Ram 1500
    Unless the hitch from the 2005 Dodge Ram 1500 is the # 75662 that mounts to the pre-existing crossmember/beam as shown in the provided diagram it won't fit. The 2005 Dodge Ram and the 2016 Ram 1500 have no other hitch fits in common.
    view full answer...
    Image 1 for
  • Availability of High Capacity Trailer Hitch for 2016 Ram 1500
    We have the Draw Tite hitch part # 41948 which is a confirmed fit for your 2016 Ram 1500 and has a capacity of 15,000 lbs but I would be surprised if your truck has this capacity or even the 10.8k capacity you are looking for. Everything I am able to look up says that your truck only could have a max towing capacity of 8,370 lbs.
    view full answer...
  • How To Install Flat Washer On Carriage Bolt of Draw-Tite 41948 Without Losing Bolt In Frame
    You are correct that when installing the Draw-Tite Trailer Hitch Receiver # 41948 on your 2016 Ram 1500 the flat washer will get installed in-between the hitch and the frame on the bolt closest to the front of the truck that you installed using the fish wire. The trick to make sure you do not lose the bolt is pushing it up very carefully and just enough to slide the washer in. You want to make sure the other 4 bolts holding the hitch up are very loose allow the hitch to sit away from the...
    view full answer...
  • Recommended Hitch for a 2018 Ram 1500 w/ a Factory Hitch
    Yes, you can install a heavier duty hitch on your 2018 Ram 1500. You will need to remove the factory hitch first there are no options to add one and keep the factory hitch. Once this is done I recommend replacing it with the Curt Trailer Hitch item # 14374. This hitch is custom fit and bolts to your Ram with included hardware. The Curt item # 14374 has plenty of towing capacity for your 7,000 lbs trailer. It maxes out at 10,000 lbs without a weight distribution system and 12,000 lbs when...
    view full answer...
  • Does Draw Tite Hitch 41948 Fit 2017 Ram 1500
    Since sometimes there is confusion between what a hitch and a reciever is I think best option would be for you to take a picture of the rear of your truck so that I can see exactly what's going on. Reciever and hitch are the same thing but sometimes people will refer to a ball mount as a hitch or reciever. So what we need to do is clarify the terminology and figure out exactly what you have. If your 2017 Ram 1500 does NOT have a factory hitch then the Draw Tite part # 41948 will fit and...
    view full answer...
    Image 1 for
  • Will Aftermarket Trailer Hitch Increase Tongue Weight Capacity on 2014 Ram Longhorn Limited
    If your 2014 Ram Longhorn Limited features a factory tongue weight capacity of 760 pounds this cannot be increased by adding an aftermarket product like a new trailer hitch. Even if the aftermarket hitch has a higher tongue weight rating, you will still be limited by your truck's base capacity. Other components on the truck such as its engine, transmission, and axle axle ratio all contribute to the truck's capacity so replacing a single part will not actually increase its overall rating...
    view full answer...
  • Will OEM Receiver Need to be Removed on 2016 Ram 1500 to Have a Class IV Trailer Hitch Installed
    To install a Class IV trailer hitch, like the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41948, on your 2016 Ram 1500 you will need to have the OEM trailer hitch removed. We do have options like this for 2500 and 3500 pickups but that is for heavy duty towing where dual receivers are required. For your 1500 this is the only way to have at least a Class IV trailer hitch. An installation video and the written instructions have been linked for you to check out.
    view full answer...
  • Recommended Trailer Hitch Receiver Upgrade for 2012 Dodge Ram 1500 5.7 Hemi
    The factory receiver hitch is rated for 5,000 lbs towing and 500 lb tongue weight. A weight distribution system is recommended for trailers over 5,000 lbs according to the manufacturer's towing guide. For the tongue weight you desire, you can use a Class III hitch or heigher with a weight distribution system. My suggestion is to go with the Curt Trailer Hitch Receiver - Class IV - 2" # 14374 or the Class V options of # C15572 or # 41948. These all have a 2 inch receiver openings and...
    view full answer...
  • Will 2016 Ram 1500 with Ball Hole on Bumper Fit with Draw Tite Hitch 41948
    Sounds like your truck has a ball hole built into the bumper which is designed for mounting a hitch ball and you are looking for a hitch to fit underneath that. If this is the case the part # 41948 would be exactly what you would need and would work well. I attached an install video for this hitch on a 2016 Ram 1500 just like yours as well.
    view full answer...
  • Pin-Style Hitch Lock for 2012 Dodge Ram Pickup
    The 2012 Dodge Ram can be fitted with either a 2-inch hitch like # 41948 or a 2-1/2-inch Class V hitch like # C15800. For a pin style hitch lock that will fit a 2-inch hitch you can use # e98880 and for one that will fit both a 2-1/2-inch and a 2-inch you can use # e98881.
    view full answer...
  • Recommended Trailer Hitch Receiver for 2018 Dodge Ram 1500 Express 4x4
    For your 2018 Ram 1500 Express, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41948. This is a Class V hitch receiver with a 2 inch receiver opening. It is rated for 1500 lbs tongue weight and 12,000 lbs towing and even more when used with weight distribution. You will also need a product like part # PC3, part # e98880, or part # 63232 to secure the accessory in your 2" trailer hitch receiver. If you don't already have factory wiring, then I recommend...
    view full answer...
  • Does Draw-Tite Trailer Hitch 41948 Fit 2019 Ram 1500 Classic Warlock
    I can confirm that your 2019 Ram 1500 Classic Warlock is compatible with the Draw-Tite Trailer Hitch Receiver # 41948. According to Draw-Tite it is compatible with all models of 2019 Ram 1500 Classic. The only thing to note is that it will only fit so long as you do not already have a factory hitch installed on your truck. I have added a link to a video install as well of the Draw-Tite Trailer Hitch Receiver # 41948.
    view full answer...
  • Needing High Capacity Ball Mount With 1 Inch Rise
    For a ball mount with a rise with a rating that meets or exceeds that of the Draw-Tite Class V # 41948 hitch, I'd recommend the # BWBMHD30210 from B&W. Unfortunately, none of the interchangeable ball sets we offer would be compatible with a high capacity ball mount like what you're looking for. I'd go with the # BWBMHD30210 with a # BWHB94050 trailer ball for your heavy duty needs, which would be good up to 16K and a lower rated ball mount like # D-4, Hitch Pin and Clip, # PC3, and a...
    view full answer...
  • Can Factory Hitch of 2017 Ram 1500 Express be Replaced with Aftermarket Hitch
    If you sourced a new bumper beam for your 2017 Ram 1500 that didn't have a factory hitch built into it you could then install an aftermarket Class IV hitch like the Draw Tite part # 41948. If that was what you were planning on doing you'd be set.
    view full answer...
  • Higher Capacity Trailer Hitch Solution for 2017 Ram 1500 with Bumper Hitch
    If by bumper hitch you mean a hole in the bumper that can have a hitch ball installed in it then you can install a higher capacity hitch like the Draw Tite Class IV part # 41948 which has a towing capacity of 15,000 lbs trailer weight. But if instead you have a lower hitch opening below the bumper we wouldn't have a fit for that configuration.
    view full answer...
  • Trailer Hitch Recommended for 2018 Ram 1500
    I'd recommend the Curt # C15572 which is the highest capacity hitch we offer for your truck, 15000 lbs towing or 1500 lbs tongue weight (maximum downward force that can be safely applied to hitch). If weight distribution is used, the capacity rises to 16000 towing/1600 lbs tongue weight. This hitch provides a 2 inch receiver. You can check out an install video by using the provided link.
    view full answer...
  • Class 5 Trailer Hitch Receiver for 2019 Ram 1500 Classic
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V # 41913 is compatible with the 2019 Ram 1500 (new body style). Since you have a 2019 Ram 1500 Classic, the correct hitch is the Draw-Tite # 41948 with a 12,000 lbs GTW/1,500 lbs TW capacity. The Curt Trailer Hitch Receiver # C15572 is also a fit which offers a higher towing capacity of 15,000 lbs with the same 1,500 lbs TW capacity. I have included an installation video for this hitch on a 2019 Ram 1500 Classic I hope you'll...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch and Weight Distribution System for a 2016 Ram 1500
    A trailer hitch receiver that's rated for 6,000 pounds towing is almost certainly a Class III hitch. The receiver opening will be 2 inches as well. A Class II trailer hitch generally maxes out at 3,500 pounds and is a 1-1/4 inch opening. I'd be really surprised if your 2016 Ram 1500 has a Class II hitch on it. With that being said I'm not sure it really matters because it sounds like what you really need a hitch that's rated higher than 6,000 pounds regardless of what Class it's considered....
    view full answer...
  • Recommendation for Removing Stuck Ball Mount from Receiver
    The best way to remove a ball mount that is stuck in the hitch receiver is to spray it liberally with WD-40 or PB Blaster, let it sit for awhile, and then alternate hitting it in various directions with a rubber mallet. It is best to let the lubricant sit for a little bit before using the mallet so that it has a chance to work its way into the receiver, and it may take quite a few times of doing this to get the ball mount to release. You can take off the OEM receiver from your 2011 Ram...
    view full answer...
  • Longest Hitch Extender that Can Fit Hitch of 2016 Ram 1500
    For 2 inch hitches that fit your 2016 Ram 1500 like the # 41948 the longest option we have is 18 inches part # HE18. We don't have any longer options so hopefully that would be long enough. This will reduce the tongue weight capacity of your hitch by 50 percent due to leverage and additional movement.
    view full answer...
  • Does Draw-Tite Trailer Hitch for 2019 Ram 1500 Classic Fit Warlock Model
    Yes, the Draw-Tite # 41948 hitch fits the Warlock model of the 2019 Ram 1500 Classic. It fits all models that don't already have a factory hitch. If you also need wiring you can use part # C55774 for both a 7-way and 4-way. Then I recommend an adjustable ball mount like # FA42-00-2600.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Andrew K
Video by:
Andrew K
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.