bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. 2 Inch Hitch
  4. Class IV
  5. 12000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Draw-Tite

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Part Number: 41931
In Stock
$295.62
Retail:$468.45
You Save: $172.83
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part number 41931 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (26)
  • Q & A (0)
  • Videos (1)
  • Photos

Draw-Tite Trailer Hitch - 41931

  • 2 Inch Hitch
  • Class IV
  • 12000 lbs GTW
  • Visible Cross Tube
  • 1200 lbs TW
  • Draw-Tite
  • 14000 lbs WD GTW
  • 1400 lbs WD TW
  • Custom Fit Hitch

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 14,000 lbs
    • Maximum tongue weight: 1,200 lbs
      • Maximum TW when used with weight distribution: 1,400 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41931 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame

81597 Hidden Hitch Class 4 Trailer Hitch Receiver

Installation Details 41931 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Video of Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Set up: Draw-Tite Ultra Frame Trailer Hitch Receiver on a 2006 Ford F-250 and F-350 Super Duty

Today we are going to install part number 41931 from Draw-Tite, and we are going to install this hitch on a 2006 Ford F-250 Super Duty. We are looking at the passengers side frame rail here, and the hitch is going to get attached at this hole here, here, here and here. And you can tell by the whole area that the original factory hitch was on there already so we already took that off. The hitch is going to attach to the same place as the factory hitch did. This one will be a lot heavier hitch. And it will be identical on both sides. The factory wiring we took and just tucked it out of the way for now during our install. We will go ahead and reinstall that after the hitch is done.

Next we will go ahead and start installing our hardware. Each set of holes will get one of these plates. We in our bolt, and we do that for the remaining three sets of holes. At this point we can go ahead and start installing our hitch. We have the hitch hung by a couple of the nuts, and now we will go ahead and install the rest of our hardware. And we have got our conical-tooth washer and our nut. And it is really going to be the same all the way around. All right, at this point we can give the bolts their final torque, as specified in the instructions.

All right, we are going to reattach the factory wiring harness back to the hitch using two additional part numbers. We are going to be using part number 18136, which is a bracket that is going to the hitch right here with a hose clamp, and then the bracket that holds the actual 7-pole is going to mount below it. All right, we will thread our factory harness back through and put our connection back into place. We will put our lock latch back in. And with the wiring hooked up and the bolts all torqued down, that finishes our install of part number 41931 from Draw-Tite.

Customer Satisfaction Score:


Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41931

Average Customer Rating:  4.6 out of 5 stars   (26 Customer Reviews)

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

by:

Nice hitch. We needed to use a bottle jack to spread the hitch frame to align the bolt patter on the truck. It seemed like the hitch was bent a bit during shipping maybe. Once we moved the hitch frame all the bolts lined up.



by:
2006 Ford F-250 Super Duty

This hitch was ordered to upgrade the original unit on my 2006 Ford F-250. It was an exact fit with a trouble-free installation.

John D. profile picture

John D.

7/27/2019

No problems with the hitch and it still looks like new.



by:

Fitment was great! Nice heavy duty hitch. I am usually a CURT person, but it was not in stock so i tried something different and are pleased with the results!



by:
2006 Ford F-250 and F-350 Super Duty

Nicely constructed looks heavy duty only problem I found is hardware bolts are much smaller than the original bolts from Ford Dealer .

Mike L. profile picture
Etrailer Expert

Mike L.

10/12/2018

The hitch includes the 12-13 X 1.75 GR5 hex bolts necessary for installation. In testing, Draw-Tite has determined that this hardware is sufficiently sized to provide the 12K towing14K weight distribution weight capacity offered by the hitch.



by:
2008 Ford F-250 and F-350 Super Duty

Trailer hitch is much better than the factory installed hitch. Factory hitch was was only rated for 5000lbs(weight carrying) vs 12,500lbs(weight carrying) for my new Draw Tite trailer hitch. I would recommend this hitch to a friend.



by:
2016 Ford F-250 Super Duty

Substantially heavier than OEM and a perfect fit.
Simply turned factory trailer wiring connector upside down, drilled one hole and mounted to bumper with a factory screw - easy fast and solid.



by:

The hitch is great, however, about half of the mounting hardware was missing from the packaging. Looks like it fell out during shipping.

Sierra K. profile picture
Etrailer Expert

Sierra K.

10/19/2021

Sorry to hear this. Customer Service will reach out to you.



by:
2006 Ford F-250 Super Duty

Hitch bolted right up to a 06 ford f-250 no drilling fit an looks great



by:

Perfect fit , easy installation



by:
2007 Ford F-250 and F-350 Super Duty

Amazing customer service and fast shipping !



by:
2006 Ford F-250 and F-350 Super Duty

Heavy duty and good quality, it bolted up with no issues. I got my delivery on the third day after the order was placed.



by:
2006 Ford F-250 Super Duty

Fast shipping, EXCELLENT customer service and order follow up. Can't say enough about how great this company is.



by:

right hitch and fast



by:

Excellent customer service. quality of product and timely shipping.



by:
2005 Ford F-250 and F-350 Super Duty

Looks to be an improvement from OEM.



by:



by:
2005 Ford F-250 Super Duty



by:



by:



by:



by:



by:



by:



by:
2006 Ford F-250 Super Duty



by:


25
26
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.