bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: 36542
In Stock
$174.49
Retail:$320.73
You Save: $146.24
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36542 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (197)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 36542

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36542 Draw-Tite Class 2 Trailer Hitch Receiver

90236 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36542 Installation instructions

This Product Fits The Following Vehicles


Weight Carrying Capacity
Gross Towing Weight (GTW):
3,500 lbs.

Tongue Weight (TW):
300 lbs.


Weight Distribution Capacity
Hitch does not allow
use of weight distribution



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia. , Underbody trim panel must be modified or trimmed if present




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36542

Average Customer Rating:  4.8 out of 5 stars   (197 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

fits but takes modifications to install Had to cut and bend bumper cover support and left mud guard



by:
2017 Nissan Rogue

A very easy and straight forward installation procedure, after removing underside splash panels on my Nissan Rogue it took 20 minutes to install and torque the trailer hitch bolts to specification.

The wiring harness took about and hour and a half due to removing trim panels in order to properly route the auxiliary power cable from under the hood to the rear of the vehicle.

All said and done it looks great and performs as advertised.

Charles

4/3/2019

Excellent!



by:
2017 Nissan Rogue

Had Hitch installed in less than 1 hour. Took longer to reinstall splash guard's. We need to install wire kit yet. Your Video's we very helpful on the install. Thanks

Michael G.

6/27/2022

Your products and customer service is way above others. Will use again. Thanks



by:

Packaging is horrible. The steel rack is put into a box with no support. The rack blew out two sides of the box and scraped up the hitch. The left side I think got bent but I was able to manipulate it into place. All in all though good price for what I needed they just need to work on their packaging.

Etrailer Expert

Tyler M.

7/19/2021

Hi Jason, Thanks for the feedback! Our customer service team will be reaching out to you.



by:
2017 Nissan Rogue

The hitch receiver is working good in my 2017 nissan rogue even that I didn’t buy the correct one, I didn’t now there was a small 1/4 hitch receiver but I bought a 1/4 to 2” adapter and is working fine, I use it for my Kuat NV 2.0 with to mountain bikes and is doing the job great. Thank you for having great products.



by:
2016 Nissan Rogue

It mostly fits, went on easy and works. I did use a few washers to space it down so it wouldn't push so hard on the sheetmetal in the center. The instructions say to discard a plastic splash guard that will be in the way but I trimmed the plastic with tin snips and put it back on, I think that is better. It bolts into factory provided threaded holes.

Too bad they don't galvanize hitches before they paint them, although it is holding up better than most here in the peak of the rust belt. I would pay more if it was available in stainless steel.



by:
2017 Nissan Rogue

Mounting holes on Hitch did not match the holes on the frame of my 2017 Rogue. I loosened, wiggled, pulled, tugged, stretched and leaned on the hitch and this was as close as I could get. See attached photo.

I will have to have my mechanic bend the hitch mounting plate so that we can secure the other two mounting bolts on the driver's side. That will likely cost more than the price I paid for the hitch.

Hitch was well painted, heavy and seemed to otherwise be a quality product.



by:
2016 Nissan Rogue

Fits perfect and was shipped fast. Looks nice on my 2016 rouge you barley can tell it's there. I went to YouTube and watched the install video before I put it on and I had no issues. I'm gonna be pulling a 6x8 trailer with it for my kayak. I also bought and installed the plug and play wiring kit. The wiring was not that hard after I watched the YouTube video.



by:

I was having a tough week so I was looking for an easy project. Decided to install the trailer hitch. It went on great! Thank you for quick delivery of a quality product at a fair price. Any one want to join me in a bike ride?

ps the video was helpful, especially the part about cleaning rust from the driver side threads.



by:

Here is a picture of the hitch receiver and the electrical plug. My installer decided to keep the plug near the hitch and not in the car when not in use.



by:

Less than two hours start to finish, it does accept bike rack, third purchase quick delivery and install videos are best example of outstanding customer service.



by:

Good trailer hitch but I should’ve gone with the 2 inch other 1 1/4. Had to get 11/4 to 2 inch adapter.

Mike D.

3/14/2023

It’s working well but I should’ve gotten the bigger size but other than that works fine.



by:

All is well. The delivery came very quickly - free 2 day shipment! What more could we ask for?

The box was a little banged up, but the hitch looks ok.



by:
2017 Nissan Rogue

Only complaint on the passenger side of the vehicle (2017 Rogue S) there are only 2 existing threaded holes in the frame not three like in the vid. Also 5 bolts sent, one left over. Here's a pic, the bottom of the pic is the rear of the vehicle passenger side.



by:
2013 Nissan Rogue

Perfect fit great quality easy install.Had some rust in the bolt threads and follawed the YouTube vidio on how to tap the bolt holes in the frame and it worked out easily.

Dennis C.

7/6/2019

great



by:
2017 Nissan Rogue

This hitch was a piece of cake to install on my 2017 Nissan Rouge. It fit perfectly. It took me about 45 mins to install which included putting the shield pieces back on.



by:
2012 Nissan Rogue

Let me start by saying if I ever needed another hitch, I would order it from Etrailer.com. The process is easy, there's plenty of online support videos to aid in installation on their own site Including a wiring video.
Here's a couple of problems I had installing a DrawTite 1 1/4 hitch to my 2012 Nissan Rogue...
The hitch holes (5) only lined up exactly with 4 of the mounting holes. The most inboard hole on the drivers side was off by about 1/4 inch with all the other bolts installed. That required the hitch to be forcefully pulled to the rear in order to have a second set of hands install the bolt, which was not easy.
The other issue regards installing the 3 new bolts into the driver side of the frame which were formerly unused threaded weld holes. Even after cleaning and lubricating the holes multiple times, flushing the rust out with WD-40, and even cleaning the holes with a battery terminal brush, those bolts were a bear to drive in without an impact gun. I had to carefully and partially screw in each bolt into the weld nuts and gradually tighten them up using an extension bar and quite a bit of force, backing them out multiple times. It almost felt like I was driving in the wrong thread size, but there was no damage to the threads at all on inspection.
The hitch is in, but the amount of effort was totally unexpected and nothing like other hitches I have installed (even those with dirty weld holes.)
One other minor issue, the shipping carton had a hole in it where the receiver rested against the box. There was no support for it to prevent wear against the carton.

Johng

6/5/2017

Still holding up, very little rust.



by:

The hitch was an easy install and works with our bike rack. I received the hitch quickly and customer service was excellent. I mistakenly ordered the wrong part and they caught my error before shipping, called me and we got the right part. I'm impressed.



by:
2015 Pontiac Trans Sport Van

A past purchase from etrailer.com provided me with confidence in making another purchase. The on-line help videos were excellent. I ran into a slight problem during installation due to the sheet-metal plate behind the rear bumper cover on my 2015 Nissan Rouge. At first I thought I was a problem with this product. I was able to push the metal bumper plate outboard a bit therefore allowing the hitch to seat properly. Installation was a breeze. I was also able to re-install the rear passenger appearance panel and make a slight modification to the driver side panel that was required to be removed for installation. This product looks great, I can’t wait to attach my bike carrier!.

My only negative would be that etrailer.com should add some reinforcement (tape & heavy cardboard) to the ends of the hitch brackets to keep from ripping through the box. I just applied spray paint to any areas of the hitch that the paint rubbed off during transport.

Jay B.

6/17/2015

Hi Bob. Do you have the SV or the SL?Thanks,Jay B.

Anonymous

6/23/2015

I have the SL model.



by:
Nissan Rogue

The is a wonderful trailer hitch for our Rogue. Very nice quality and finish. Plus the hardware is included. Installation was pretty straight forward and for a DIY'er, I was able to do it in about 75 minutes. I didn't need to remove the exhaust like the video shows as I could maneuver the hitch in place and then, with an extra set of hands, secure a couple bolts before tightening all the way.

Brant

7/15/2021

Still working well. The second one we bought was for our Nissan and the original one I bought was for a VW. Both are still in great shape, especially with MN road conditions and the weather.



by:
2015 Nissan Rogue

Received the trailer hitch and installed it on a 2015 Nissan Rogue. The hitch fits perfectly and it only took me about 45 minutes for the installation. It's a great addition to the vehicle.

The only concern is that the box was torn in several places from shipping via UPS.

Bill B.

4/29/2018

The hitch is working exactly as expected. Im still pleased with this product.



by:
2016 Nissan Rogue

tow hitch and wire harness for 2016 roque. Installed the hitch in about 20 minutes on my own, wire harness about an hour, check out installation video, excellent product. i would recommend it to a friend.

Bryn D.

2/20/2018

excellent product, would purchase again.



by:
2013 Nissan Rogue

I bought a trailer hitch and wiring for my 2013 Nissan Rogue. The hitch went on in a minute, the wiring a little longer but the video was a tremendous help. No issues here and free shipping is a big plus.

Gary

9/28/2015

I use the trailer hitch to tow my 16 boat around the northwest to fish for salmon and other fish. The dealer wanted almost $600 to install a hitch and lights. I did it for about $200. the products are well made and meet all industry standards, the instructions were easy enough to follow. I would buy these again. the only regret is that I bought the small size receiver on the hitch. I strongly recommend others to buy the 2 receiver as it will all the accessories that the small one will not..



by:

Not installed yet, but arrived quickly and in very good condition. Best price I saw online, and quite a bit better than auto parts stores (and I have an account and receive a discount).
For trailer parts or hitches, I doubt you’ll do better.

Ben A.

12/5/2020

Clean and tidy. No problems.



by:

Hitch installed EXACTLY like shown. I was able to get it installed without jacking the car up or removing the muffler and by myself. Placed hitch on passenger side up close and on a jack stand and then raised up the drivers side and started a 2 of the bolts. Moved to the passenger side - installed all bolts loosely and then snugged them up as directed. Hitch looks great!

Tim A.

8/21/2017

Works great!


25
199
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Troubleshooting Bolts Not Fitting When Installing Draw-Tite Trailer Hitch on a 2008 Nissan Rogue
    If you are having trouble getting the hardware to install for your Draw-Tite trailer hitch then what you need to do is soak the bolt holes with WD40, wait for a few minutes to let it set in, and then use a wire brush like part # 814113 to clean out any dirt or debris. This isn't very uncommon especially on vehicles that are a little older. Another thing to check is to make sure that you have the correct trailer hitch for your vehicle. If you are trying to install a hitch on the 2008 Nissan...
    view full answer...
  • What Vehicles does Draw Tite Hitch # 36542 Fit
    The Draw Tite hitch part # 36542 that you referenced fits the following: 2008 - 2020 Nissan Rogue 2014 - 2015 Nissan Rogue Select 2010 - 2011 Nissan Rogue excluding Krom
    view full answer...
  • Trailer Hitch and Wiring for a 2017 Nissan Rogue
    Yes, there are Class III, 2 inch trailer hitches available for your 2017 Nissan Rogue. You can use Draw-Tite hitch # 75902. I have linked a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount...
    view full answer...
  • Will the Yakima FullBack Bike Rack Fit a 2015 Nissan Rogue SL AWD
    The Yakima FullBack bike rack # Y02634 will not fit the 2015 Nissan Rogue but it does fit if it happens to be a Rogue Select. So if your Rouge is badged with "Select" or is otherwise stated as a Select model in its literature then the FullBack will work. If it is not a Rogue Select then I recommend installing a trailer hitch and using a hitch mount bike rack which is the safest way to carry bikes on a vehicle and eliminates contact with the vehicle. If you are looking to carry just 2 bikes...
    view full answer...
  • Trailer Hitch fit for a 2017 Nissan Rogue and Thule Bike Rack
    You can use the threaded pin and clip from your Thule rack with a trailer hitch. As for ease of installation, each of the hitches available for your 2017 Nissan Rogue are bolted on, and only require the removal of the appearance panels if your Rogue has them. This should be done, and will not compromise the vehicle in any way. When it comes to clearance, you mention your Thule rack is about 7-1/4 inches from the receiver hole to the release lever, and correctly note that Draw-Tite hitch...
    view full answer...
  • Trailer Hitch Recommendation for a 2016 Nissan Rogue for a Bike Rack
    The Draw Tite Hitch part # 36542 that you referenced has been confirmed as a fit for your 2016 Nissan Rogue so it would fit and work well. It also has a 300 lb tongue weight capacity so it would do a great job with a bike rack as well so I would recommend it for you. I attached an install video for this hitch for you to check out as well. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 # TH9058. We asked our demo and install guys to...
    view full answer...
  • Recommended Trailer Hitch And Wiring For 2015 Nissan Rogue
    We do not have a complete kit for all of the items you are looking for but I can make recommendations for each of the items you asked about. We have trailer hitches that have a 1-1/4 inch receiver opening that will work with your 2015 Rogue. I recommend the Draw-Tite # 36542. This is a Class ll hitch. The ball mount I recommend for the # 36542 is part # 36053. This ball mount features a 5/8 inch rise and 1-1/4 inch drop. For a 1-7/8 inch hitch ball I recommend part # 19256 and for a...
    view full answer...
  • Trailer Hitch Availability for 2016 Nissan Rogue
    We have Class III and Class II hitches available for your 2016 Nissan Rogue. For a Class III which has a 2 inch opening I would recommend the part # 75902 which is confirmed as a fit. For a Class II we have the part # 36542. Whenever available I always recommend a Class III over a Class II as more accessories are made for that size hitch as well as it having better capacities.
    view full answer...
  • Will Motion Sensor Still Function on 2018 Nissan Rogue with Trailer Hitch Installed
    For your 2018 Nissan Rogue I recommend the Draw-Tite Class II Frame Receiver Hitch # 36542. This Class II hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. The motion sensor on the rear gate will still work with the hitch installed. The only difference will be that you will likely have to move your foot to either side of the hitch receiver for the sensor to pick up your movement. The hitch will not cause the gate to open up by itself....
    view full answer...
  • Installation Process for Draw-Tite Class II Trailer Hitch Receiver 36542 on 2016 Nissan Rogue
    Draw-Tite Class II hitch # 36542 installs without drilling in your 2016 Nissan Rogue and if your Rogue happens to have the appearance panels that cover the driver-side and passenger-side frame rails, these will need to be removed (but not replaced after hitch installation). These are shown in the linked installation video. Factory tow hooks, if present will also be removed and not re-installed. The written instructions are linked for you too, along with a helpful article on hitch installation.
    view full answer...
  • Trailer Hitch Recommendation for 2011 Nissan Rogue With Thule Camber 2 Bike Carrier
    I recommend the Draw-Tite Max-Frame Trailer Hitch Class III 2 Inch Hitch, part # 75902, for your 2011 Nissan Rogue SV. This is a 2 inch hitch with a towing weight capacity of 3,500 lbs. and a tongue weight capacity of 350 lbs. The 2 inch size hitch is the most common. The Draw-Tite Class II 1-1/4 Inch Hitch, part # 36542, you have referenced is a Class II trailer hitch. The 1-1/4 inch receiver will limit your choices of hitch accessories and if you decide to tow a small trailer in the...
    view full answer...
  • Will Draw-Tite Hitch 36542 for 2014 Nissan Rogue Work with Bike Rack
    Yes, the Draw-Tite Trailer Hitch Receiver part # 36542 which is a fit for a 2014 Nissan Rogue is plenty capable of carrying a bike rack. The only thing you need to make sure of is that the rack is compatible with a 1-1/4" opening such as the Thule Hitching Post Pro part # TH934XTR and you don't exceed the 300 lb tongue weight rating.
    view full answer...
  • Country of Origin of Trailer Hitch Receivers for a 2011 Nissan Rogue
    There are 4 trailer hitch receivers that will fit the 2011 Nissan Rogue. Both Draw-Tite Hitches, # 75902 and # 36542, are made in Mexico and the Curt hitches, # C13204 and # C12122, are made in the US.
    view full answer...
  • Correct Draw-Tite Trailer Hitch with Hidden Crosstube for a 2015 Ford Edge SEL
    The Draw-Tite Trailer Hitch # 36542 that you referenced is for a Nissan Rogue which is why you are seeing the instructions like that. The Draw-Tite trailer hitch that fits your 2015 Ford Edge SEL is part # 75234. This has the same hidden crosstube design with the only difference being the option you mentioned has a 1-1/4" receiver while the one that fits has a 2" receiver. The 2" receiver is actually the better option because it fits with a wider variety of accessories without an adapter. I...
    view full answer...
    Image 1 for
  • Bike Rack Fit Confirmation for 2016 Nissan Rogue S
    The Draw Tite Hitch part # 36542 that you referenced is a confirmed fit for your 2016 Nissan Rogue S. As long as your bike rack is designed to fit a 1-1/4 inch hitch this would work well for you. Since it is a 4 bike rack you may need a Class III hitch part # 75902 instead. This hitch instead has a 2 inch opening.
    view full answer...
  • Class II 1-1/4 Inch Trailer Hitch for a 2014 Nissan Rogue and Saris Freedom Bike Rack
    Draw-Tite trailer hitch # 36542 does indeed fit your 2014 Nissan Rogue. The receiver tube on this hitch actually extends out pretty far so clearance is less of an issue for accessories than it could be. The Saris Freedom bike rack # SA4412B measures 12 inches from the center of the hitch pin hole to the closest wheel tray. That is a good amount of extension from the hitch so interference would not be a concern! I have linked a video review of this rack for you.
    view full answer...
    Image 1 for
  • Thule Camber 2-Bike Rack Compatibility with 1-1/4 Inch Hitch Receiver on 2016 Nissan Rogue
    The hitch receiver Nissan Part No.: 999T5G2300 is a Class I trailer hitch receiver that will be compatible with the Thule Camber 2 Bike Rack - 1-1/4" and 2" Hitches - Tilting # TH9058. This is a nice rack with anti-sway cradles and tilt to allow you access to your hatch and cargo area. With this bike rack, I also recommend the Thule Snug Tite Hitch Lock and Anti-Rattle Device # THSTL2 to secure your rack to the hitch receiver and the # e98891 cable lock to secure your bikes to the rack....
    view full answer...
  • How to Carry 4 Bikes On a 2008 Nissan Rogue with Class II Hitch
    All of the trailer hitches available for your 2008 Nissan Rogue have a Class II rating, which means you will have no problem carrying 4 bikes as long as you stay under the tongue weight rating of the vehicle and hitch. If you are still looking for a trailer hitch, I recommend the Draw-Tite Class II Trailer Hitch, item # 36542. This hitch has a tongue weight capacity of 300 lbs, see instructions link, which is common for Class II hitches and will allow you to carry 4 bikes with no problems....
    view full answer...
  • Availability of Hitch for 2010 Nissan Rogue Krom Edition
    None of the hitch manufacturers we represent have a hitch that will work with the Rogue Krom edition, due to the way the exhaust exits the rear of the vehicle. The twin exhaust outlets sit in the center of the bumper fascia, right where the receiver opening would be. Designing a hitch to sit under the exhaust outlets would not work well, as it would severely compromise the vehicle ground clearance. (See the photo I've edited for you.) If you were wanting the hitch to provide a mounting...
    view full answer...
    Image 1 for
  • Which Hitch Fits a 2010 Nissan Murano
    I have a hitch solution I can provide for your, but the Rogue and Muranos are different enough to call for different hitch designs. For your 2010 Murano you would want the etrailer hitch # e65AR which is a confirmed fit.
    view full answer...
  • Recommended Installation Of Draw-Tite Trailer Hitch Receiver On 2011 Nissan Rogue
    The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36542 can be installed without a lift using some basic car ramps or jack stands. It will be a little more confining but it can and has been done. If you don't want to do the work yourself, you can have any local mechanic you trust do the install for you. If you will be using this hitch for multiple accessories, I recommend getting the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75902...
    view full answer...
  • Recommended Trailer Hitch Receiver for a 2016 Nissan Rogue to Pull a 600 lb Boat on Trailer
    The Draw-Tite Trailer Hitch Receiver # 36542 that you reference is a confirmed fit for your 2016 Nissan Rogue SV and has a Gross Towing Weight (GTW) of 3,500 lbs and a max Tongue Weight (TW) of 300 lbs. This should be sufficient to pull your boat and trailer but you will want to check your weight to make sure. If you have not bought the trailer hitch yet then I recommend going with the Draw-Tite # 75902 which has a slightly higher rated TW of 350 lbs and uses a 2 inch receiver meaning...
    view full answer...
  • Which Hitch Size is Recommended for a 2011 Nissan Rogue to Carry Saris Freedom 2 Bike Platform Rack
    I typically try to recommend 2 inch hitches when they are available as they have higher towing capacities and since there are more hitch accessories made for that size they offer more flexibility. That being said, the 1-1/4 inch size is smaller and less noticeable than a 2 inch hitch so from an aesthetic point of view I can see the appeal of a 1-1/4 inch hitch. The Saris Freedom part # SA4412B can fit either size hitch and would work just as good in either. For a 1-1/4 inch hitch for...
    view full answer...
  • Hitch Recommendation for a 2015 Nissan Rogue
    The Draw Tite Hitch part # 36542 that you referenced is confirmed as a fit for your 2015 Nissan Rogue and I according to the installation instructions (which are linked), the underbody panel of the vehicle does not need to be removed. But if you watch the attached install video that I attached for this hitch you will see that the panel does need to get removed. Having the panel removed won't affect anything so you would be just fine having it removed.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Ryan G
Test Fit:
Ryan G
Employee Clayton O
Test Fit:
Clayton O
Employee Jacob T
Video Edited:
Jacob T
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924