bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. 1-1/4 Inch Hitch
  4. Class II
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Draw-Tite

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Part Number: 36407
In Stock
$226.73
Retail:$407.85
You Save: $181.12
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36407 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (284)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch - 36407

  • 1-1/4 Inch Hitch
  • Class II
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 300 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36407 Draw-Tite Class 2 Trailer Hitch Receiver

90137 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36407 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36407

Average Customer Rating:  4.8 out of 5 stars   (284 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:

Great hitch, install was very easy with the threaded wire included making it easy to get the carriage bolts in the frame rails.

Daniel profile picture

Daniel

6/24/2024

The hitch works great, no problems over a year later



by:

Outstanding online transaction. Clear, easy to understand website. Fast delivery (not to door), and packaging prevented damage, but was punctured. Your instructional videos were very helpful. Hitch heavier than it looks, hired a local trailer shop to install. Wish I had ordered the wiring kit with the hitch.



by:
2011 Chevrolet Impala

The Draw-Tite trailer hitch receiver for our 2011 Chevy Impala worked out great!
It was easy to install with no drilling or welding. We pulled a 14' wooden boat on a small trailer. We would still be using it but for a distracted driver rear ending the car last January, totaling the car.



by:
2010 Chevrolet Impala

I could not believe how easy this was to install or how quickly it shipped (for free). I installed it by myself in about a half hour (including the 4 flat connector I purchased at the same time). This is a great product and I would recommend it to anyone.

Scott profile picture

Scott

7/11/2020

Perfect



by:
2010 Chevrolet Impala

Arrived quickly and well packed. It does have the bolt fishers in the parts package (4) so no need to purchase. The video is very accurate on how to install - except if your Impala is an "SS" or LTZ with dual exhausts you have both mufflers to drop - and you can't really just pull it to one side (as shown in the video) - as they are welded in a "Y". Still the installation is rated as a 4 out of 10, and that is really true. I did the fishing of the bolts, and the install of the fitted wire harness by myself - but had a helper to lift the hitch into position. Everything was done without the car jacked off the ground, and after watching the video - it was EASY. Thanks



by:

Good Product, did what I wanted it to do. Pretty easy to install. Since it fits up under the trunk, the safety chain links are a little far back, have to get on knees to hook. No big deal. Overall very pleased. The chain hookup is why a 4 and not a 5. Dont hesitate on getting this, works great. I did get an adapter to use a 2" hitch rather than the 1 1/4". It too works well. No problems.

Dave profile picture

Dave

9/8/2023

If you use 2 hitch you will need safety chain extentions. If you use the 1 14, the trailer hitch will hit the plastic bumper and take off the paint. Overall I am pleased.

MikeL profile picture
Etrailer Expert

Mike L.

11/1/2023

@Dave We're glad you're happy with your hitch...


by:

Very happy with the purchase. Item arrived as scheduled. Great installation documentation made it very easy to install , nice to see the attention to detail on the website!!! Customer service was great also. I would order through them again!!



by:

The installation for this hitch was super easy! It literally took me just over a half hour from start to finish. .. honestly it took longer to find my wrenches.
After Dropping the exhaust down from the rubber hangers, I was surprised how easy the fish wires were to use. All of the holes lined up, and the bolts dropped into place. One of the simplest things I've done to my car ever! Almost ranks with putting gas in. LOL



by:
2014 Chevrolet Impala

I installed this hitch on my 2014 Impala w/out help. Took me almost 2hrs from start to finish. Not bad for a 80 year old man. Your video was right on. I backed the car up on metal ramps used for changing oil and used plastic crates under each muffler plus the strap to hold pipes from going too low. The crates let me rest the hitch on top of the mufflers so I could line up the bolts. I started a nut on one back bolt and went from there. Lining up one side at a time with a loose nut and once all nuts were on I tightened one and put washers on the rest and then went back and added washers to all.. Very easy for DIY.



by:
2001 Chevrolet Impala

Was easy to install since my 2001 Chevy mpala back end sits high didn't have to use my jack. I plan to use a bike rack so I can take my kids bike riding at the park!



by:
2011 Chevrolet Impala

Very easy installation ! I'm very pleased with the results . I no longer have to rely on my buddies to haul my dirt bikes to the trails. Thanks etrailer



by:

Absolutely love the hitch super easy install just pull down the exhaust and bolt it in took no more than 30 minutes to fully complete. Lights were super easy just a clip on all had to do was remove the passenger tail light 10/10 would definitely recommend.



by:

Installing the hitch was not difficult. All the bolts lined up good and no problem. Used a floor jack to help install I was by myself.



by: 08/16/2022
2009 Chevrolet Impala

Installation was simple. Connector was easy. Good to go.



by:
2005 Chevrolet Impala

Great, solid product. Installation was very simple. the wire retainers for the bolts worked very well. Would recommend!



by:

The hitch seems like top quality. It installed pretty easy. The hardest part was lifting and bolting it in place. It looks great though and doesn't stick out at all. I am satisfied!



by:
2006 Chevrolet Impala

Perfect fit, one of the easiest hitch installations I've done. Installed this hitch by myself in less than an hour. Did it by backing the vehicle on ramps instead of using a jack. Start by removing the muffler hanger bracket bolts. On my 2006 Impala a socket could not be used. I had to loosen the 2 bolts with a boxed end, take pressure off muffler and remove them by hand. Hint - tie the muffler out of the way once the bolts are removed. The supplied fish wires made snaking the carriage bolts and retainers a breeze. 4 were included, but I only used 1. I lined the bolts up with the holes on the hitch and held it up with a knee and my left had. Got a nut on each side to hold it and put washers and nuts on the remaining bolts. Once snug, remove the nuts used to hold it and reinstall with washer. Tighten the 6 nuts, untie the muffler, put the two bolts back in the hanger bracket and you're done! Great looking hitch and easy to install.

Ayjude profile picture

Ayjude

8/9/2017

Working fine, no complaints.



by:

fit was excellent, after a year have had no problems. Liked the wire tool sent with the hitch to thread the bolts through the frame as it made it easy to accomplish a otherwise impossible task. I haul my dirt bike on this hitch and got a adaptor to make it a 2" receiver and raise the height of the carrier but the adaptor drags on elevated surfaces. Have to be careful when I go up a raise in the road, especially elevated driveways. Did buy a hitch tightener which really help stabilize my motorcycle carrier. Would buy again for sure.



by:
2010 Chevrolet Impala

I have ordered a hitch and parts for a 2010 Chevy Impala and let me tell you..I couldn't be happier. The whole experience was fantastic; easy online transaction, perfect communication, well-packaged shipment and fast delivery. The product is excellent, it came with instructions which made installation easy and etrailer carries everything you need to finish your project. You can't go wrong buying from etrailer.

Hilton D. profile picture

Hilton D.

1/8/2020

Excellent hitch! Well designed, concealedbarely can be seen. Ive watched the installation video and my mechanic was stunned how simple is was, especially the special tool included to help to guide the bolts into the nuts inside the chassis. awesome. It was worth it every penny spent. Strongly recommend Etrailer.com.



by:

I have purchased from them before and was satisfied, this time was no different!



by:

Very happy with the Draw-Tite hitch.



by:

The hitch was easier to install than I thought it would be. The most difficult part was manhandling the hitch while trying to install the nuts on the bolts. A helper would have been a huge labor and time saver but I managed. It took approximately an hour to complete the job.

I am very happy with the results. I like it that the hitch is not very noticable when veiwing from the back. It seems to be very solid and well built. I would recommend this product.

Sam F. profile picture

Sam F.

10/18/2013

Looking into getting a hitch for my 04 Impala to pull a 14 foot fishing boat with a 40 hp. Can this be done without hurting my car?? Dry weight of boat 1090Lbs.

PatrickB profile picture

Patrick B.

10/22/2013

This hitch, along with a couple others, have a 3500 pound towing capacity. The hitch would definitely be up to the task. The more important question is, will the Impala handle the weight? To answer that, we need to head to the owners manual. It should list the towing capacity of the vehicle, remember this figure can vary based on engine, transmission and a host of other factors so we need to verify. You can also refer to the door sticker. It will have listed a GCWR, or Gross Combined Weight Rating. That is the total legal and approved weight of the car, anything in or on the car, and anything the car as pulling.


by:

Great product. Easy install. Great price! I have purchased several of these from e trailer and they fit perfect on all the cars I have put them on.

Mark profile picture

Mark

3/27/2023

Still working great! I use it mainly for my bike rack. I love that it is tucked back and not very intrusive. But it’s still easy to get to to install the pin.



by:
2015 Chevrolet Impala Limited

Install was super simple, definitely a two person job while one person holds the hitch while the other one installs the bolts. Hardest part was dropping the exhaust out of the way. Hitch does what I need it to do for a cad and it hides away nicely under the bumper. I also bought an adapter that sticks out further and goes to 2” to fit the rest of my hitch accessories.



by:

The mounting holes did not match the holes in the chassis. I called customer support and they advised me to "pull real hard and stretch it to make it fit." Pull real hard? I was stunned speechless by the stupidity. Do you want a hitch that's so flimsy you can manually bend it? Ended up drilling new mount holes.

Sierra K. profile picture
Etrailer Expert

Sierra K.

8/11/2021

I appreciate your review. It is silly that your hitch receiver would arrive to you flexed. The reason why hitch receivers are flexible is in case of an accident, it would protect the rear of your vehicle. Please see the attached help article:


25
287
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Recommended Trailer Hitch Receiver For 2005 Chevrolet Impala
    I have another option for you but the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13315 you were looking at is only confirmed to fit select Mazda CX-5's. There is not a class III hitch available for your 2005 Chevrolet Impala so I recommend the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36407. This hitch has a 300lb tongue weight rating and 3500lb trailer weight rating so it will be perfect for carrying a bike rack, cargo carrier, or even a ball...
    view full answer...
  • Tongue Weight Rating for a Draw-Tite for a 2002 Chevy Impala Transporting an Electric Scooter
    The maximum tongue weight rating for this Draw-Tite Trailer Hitch # 36407 that you referenced is 300 lbs. The weight of your electric scooter and ramp combined equals 271 lbs, and if that is all the weight that would be on the hitch then yes you would be fine. My only question is if by ramp do you mean scooter carrier? Because if not, you will need to factor that weight into the total as well. If are in need of a scooter carrier you should check out the OldenKamp Scooter Carrier # RHWC1114....
    view full answer...
  • Parts Needed to Tow Boat Trailer with 2005 Chevy Impala
    We have everything need to get your 2005 Chevy Impala set up for towing a small boat trailer. Starting with the trailer hitch, the Draw-Tite Class 2 Trailer Hitch Receiver # 36407 that you referenced is confirmed to fit your vehicle and is what I recommend going with. The Class II hitch gives you a strong unit and will make it easy to find compatible accessories down the line (such as bike racks and cargo carriers) if you ever decide to use the hitch in that manner, since it has the...
    view full answer...
    Image 1 for
  • Draw-Tite Trailer Hitch Receiver Fitment and Curt Wiring For a 2002 Chevrolet Impala
    For your 2002 Chevrolet Impala I recommend the Draw-Tite Trailer Hitch Receiver # 36407 as it is a custom fit for your Impala. This Class II receiver is rated for 300lbs of tongue weight and trailer load capacity of 3,500lbs. Be sure to not exceed the weight capacities given by Chevrolet for your Impala. The Draw-Tite Sportframe Trailer Hitch Receiver 24990 that you found is custom fit for a 2019-2021 KIA Forte Sedan, except models without factory frame weldnuts. A Curt Vehicle Wiring...
    view full answer...
  • Easy, No-Hassle Hitch and Bike Rack Combination for a 2010 Chevrolet Impala
    No, the manufacturer of the Draw-Tite Trailer Hitch, # 36407, for the 2010 Chevrolet Impala does not require the use of a stabilizing strap, part # 18050, for carrying a bike rack and bikes within the capacity of the hitch and vehicle. I have added a link to instructions for you to review. For a bike rack, I would recommend the Yakima HoldUp 2 Bike Rack, # Y02445. This rack is the one most often purchased by our customers who own the Chevrolet Impala. We have a video review of this rack...
    view full answer...
  • What Trailer Hitch Will Fit On My 2011 Chevrolet Impala
    Without knowing exactly what trailer hitch you have on your 2004 Chevrolet Impala I don't know if it will work on your 2011. However, two out of the three trailer hitches we carry for the 2004 Impala are also compatible with the 2011 Impala, the Draw-Tite Class II Frame Receiver Hitch # 36407 and the Curt Class II Receiver Hitch # C12252. If your hitch is not one of these then it may not fit and you would want to purchase one of the hitches above. Between the two hitches I would suggest...
    view full answer...
  • Is Trailer Hitch For 2008 Chevrolet Impala Guaranteed To Fit
    The trailer hitches we offer for your 2008 Impala are guaranteed to fit. These hitches are designed specifically to fit your car frame. The trailer hitch you came from is the Curt, part # C12252. This is a Class ll hitch and it has a 1-1/4 inch receiver opening. The other trailer hitch is the Draw-Tite, part # 36407. This is also a Class ll hitch with a 1-1/4 inch receiver. I recommend the Draw-Tite hitch because it does not require a stabilizing strap like part # 18050 for all non-trailer...
    view full answer...
  • Bike Rack Options for a 2008 Chevrolet Impala LT
    The Thule Passage 3 Bike Carrier Trunk Mounted Bike Rack, part # TH911XT, that you referenced would work on your 2008 Impala for carrying your 2 or 3 aluminum bikes. I attached instructions for this rack below as well as a review video of this product. Since you are only carrying 2 bikes you could also use the 2 bike version, # TH910XT. Another option you have is to get a Draw-Tite Trailer Hitch for the 2008 Impala by Chevrolet, part # 36407, and then use a Thule Camber Bike Carrier for...
    view full answer...
  • Will the Curt Trailer Hitch Receiver # C11433 Fit a 2004 Chevrolet Impala
    I do have a solution for you, but the Curt Trailer Hitch Receiver # C11433 is not compatible with your 2004 Chevrolet Impala. For a similar trailer hitch you will want to go with the Draw-Tite part # 36407. This is a Class II hitch with a 1-1/4" receiver opening. It is rated for 3,500 lbs Gross Towing Weight (GTW) and 300 lbs Tongue Weight (TW). You will want to check your owner's manual for any special instructions or weight restrictions as well. I attached an installation video and...
    view full answer...
  • Parts Needed to Tow a Trailer with a 2005 Chevrolet Impala
    I do have an option for you but your 2005 Chevrolet Impala would not be rated for anywhere near the tongue weight you would need for a cargo carrier and 370 lb wheelchair. The tongue weight capacity of your vehicle is likely between 100-150 lbs but you can verify this in your owner's manual. The only way that you would be able to safety haul around the wheelchair would be with a small utility trailer like the Detail K2 Mighty Multi Utility Trailer part # K2MMT4X6. In order to haul this...
    view full answer...
  • Are there Any 2" Hitches for a 2009 Chevy Impala
    Deron, you are correct, there are no 2" hitches for your 2009 Chevrolet Impala. You'd have to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver # HTAD with the Draw-Tite Trailer Hitch Receiver # 36407. It also needs to be said that anytime you use a hitch adapter like # HTAD, your hitches capacity is cut by 50%.
    view full answer...
  • Getting Replacement Hardware for Draw-Tite part # 36407
    We have a part number for Replacement Hardware Kits, part # RHK. You input your hitch number and manufacturer and our system will select the correct hardware kit for you. You will find a link below for part # RHK.
    view full answer...
  • Hitch Mounted Bike Carrier Does Not Fit Class l Trailer Hitch On 2014 Chevrolet Impala
    I checked your purchase order and found you purchased the Draw-Tite Trailer Hitch, part # 36407. This hitch is a 1-1/4 inch Class l hitch and should accommodate any 1-1/4 inch accessories. Since you said you measured the inside dimension of the hitch and it is 1.26-inches, it seems the hitch is accurate and correct. If the bike carrier you purchased does not fit because it is 1.28 or 1.29 inches then I recommend checking with the retailer for information on a fix or return the bike...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2005 Chevrolet Impala
    I have another option for you, but the Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" # C13900 you mentioned is not a confirmed fit for your 2005 Chevrolet Impala, and there is not a 2" receiver option confirmed to fit your vehicle at this time. Instead I recommend going with the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36407 which is a Class II 1-1/4" receiver with a 300lb tongue weight rating and 3500lb trailer weight rating. If you are planning...
    view full answer...
  • Will the Draw-Tite Class II Trailer Hitch # 36407 Fit on a 2009 Impala LTZ with Dual Exhaust
    Yes, the Draw-Tite Class II Trailer Hitch, item # 36407, is designed to work with the dual exhaust models. There is not a lot more time, or trouble, required for installation on dual exhaust models. The only difference is that you have to lower the drivers side exhaust as well as the passengers side. We have an installation video on a 2007 model that has the dual exhaust for you to review, see link. I have also included a link to the installation instructions for you to review. Some...
    view full answer...
  • Will Bike Rack 11 in of Clearance from Hitch Pin Hole to Upright Mast Fit on Draw Tite Hitch 36407
    When we installed the Draw Tite hitch part # 36407 we found that from the center of our hitch pin hole to the outermost point of the bumper is 6-1/2 inches. If your bike rack has 11 inches from it's pin hole to the back of the upright mast this would easily clear.
    view full answer...
    Image 1 for
  • 3 & 4-Bike Carrier Options for 2011 Chevrolet Impala
    No 4-bike trunk-mount racks are made for any car due to the extreme weight load this would present. The chance for damage to the trunk or rear hatch from all that weight (easily 150-lbs between the 4 bikes and the weight of the rack itself) would be too much for the car. We do offer 3-bike trunk racks for your 2011 Chevrolet Impala that you can see on the linked page. I like the Thule # TH56BV as it fits over most spoilers and includes locks. If you need to carry 4 bikes you can instead...
    view full answer...
  • Is Exhaust Modification Required to Install Draw Tite Trailer Hitch on a 2011 Chevy Impala
    To install a trailer hitch like the Draw Tite hitch part # 36407 on your 2011 Chevy Impala you would need to temporarily lower the exhaust system so that you can install the hitch. It would get installed back in it's original location without any modification once the hitch is bolted in place. This is a very standard step for installing a trailer hitch. I attached an install video for you to check out as well.
    view full answer...
  • Hardware Included for 2005 Chevy Impala Hitch
    All of our hitches are shipped with all the hardware necessary to install it. I have included a link to a video showing a hitch installation on a 2005 Chevy Impala that you may find helpful. You can also see the parts list on the attached instructions.
    view full answer...
  • Bolt Leader and Wiring Harness for a 2007 Chevy Impala
    All of the hitches sold on our website come with the necessary hardware to install the hitch on its respective vehicle, but do not include the tools. If you should decide you need to purchase a bolt leader for the installation of the Draw-Tite Class II Trailer Hitch Receiver, item # 36407, you will need the 1/2 inch Bolt Leader, part # 80101-1. The T-One Wiring Harness for your 2007 Chevy Impala is sold separately from the hitch, and it is the T-One Vehicle Wiring Harness, item # 118417....
    view full answer...
  • Will The 36407, Draw-Tite Class II Trailer Hitch Fit all Chevrolet Impala models from 2000 to 2009
    Yes the Draw-Tite Class II Trailer Hitch, part number 36407, will fit all Chevrolet Impala models from 2000 to 2009.
    view full answer...
  • How Much of Trailer Hitch # 36407 is Visible Once Installed on a 2000 Chevy Impala
    Based on the pictures that are on the product page (the last 2 show it the best), and the image in the upper left corner of the instructions that I have linked, the receiver will be the only part of the hitch easily visible once installed on your 2000 Chevy Impala. If you plan to do some towing the recommended ball mount is # 36061 for use with ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter). For trailer wiring, you would use # C56116. I have included a link the installation...
    view full answer...
  • Can Hitch Extender be Used on Class II Hitch to Carry 4 Bikes With 2012 Chevy Impala
    You can certainly use an adapter like the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver (Class II Only) # 80303 to carry your bikes on your 2012 Chevrolet Impala. The one thing you have to keep in mind here is that the use of any adapter is going to reduce the capacity of the hitch by 50%. This means that the tongue weight on your Draw-Tite Trailer Hitch Receiver # 36407 will drop from 300 lbs to 150 lbs. As long as you do not exceed the 150 lbs between your bike carrier and the bikes...
    view full answer...
  • Replacement Mounting Bolts for a Hitch on a 2009 Chevy Impala
    A replacement installation hardware kit can be ordered on our site by using item # RHK and putting in the manufacturer and part number of the hitch in the spaces provided. Some items you may also need with this Class II hitch are listed below. Drawbar # 36061 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879 Pin and Clip # PC2
    view full answer...


< Previous



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924