bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. 1-1/4 Inch Hitch
  4. Class I
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Draw-Tite

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

$185.34
Retail:$293.24
You Save: $107.90
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
Trailer Hitch 24692 - 200 lbs TW - Draw-Tite
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24692 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (101)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch

  • 1-1/4 Inch Hitch
  • Class I
  • 2000 lbs GTW
  • Visible Cross Tube
  • 200 lbs TW
  • Draw-Tite
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



24692 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60870 Hidden Hitch Class 1 Trailer Hitch Receiver

Item # 24692

Installation Details 24692 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24692

Average Customer Rating:  4.8 out of 5 stars   (101 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2006 Ford Focus

I own a 2006 Ford Focus ZX5 and I use the hitch for my bike rack. The hitch did not lineup with the pre-drilled holes on the frame of my car. As a result, it was difficult to install and the hitch is visibly crooked (not parallel with the car's frame or the ground). The right side of the hitch is too high, leaving an indent on the bottom of my back bumper. Over the past year, the hitch seems to have bent or adjusted to the frame and it is more level than when originally installed. Luckily, this never effected the use of my bike rack. I haven't had any other issues since installation.

Jenny N. profile picture
Etrailer Expert

Jenny N.

1/5/2023

It is unusual that the hitch would be crooked when installed. I wanted to see if you could send pictures of where the hitch is bolted to the frame. It is possible that the side brackets were flexed which would have made it more difficult to install.



by:

This transaction was completed unbelievably well. From the website information to the customer reviews to the prompt shipping to the installation of the etrailer hitch. I will recommend etrailer to anyone needing a superior product and wanting to do the installation themselves, and best of all, save money! I needed a light/medium duty hitch for a small car and etrailer came thru with the perfect product. The vehicle is a tow-car (behind a RV) and the hitch will be used to move the car dolly around at camp sites. Thank you, etrailer !!!

Dickie S. profile picture

Dickie S.

3/21/2020

Hitch has performed as advertised and continues to be a good purchase. I will continue to recommend etrailer and their products.



by:

This hitch was easy to install on my 2007 three door Ford focus and is working very well.
I attached a two bike rack in it and carry one bicycle 3 to 4 times a week 8 to 10 miles for a bicycle ride in the woods. Once a month I put two bicycles on the back hitch rack and go out of town 150 miles each way. I’ve had zero problems with this hitch and it is still tight and nice!

Greg D. profile picture

Greg D.

12/3/2020

After year of using this hitch a few times a week with one and sometimes two bikes on it I’ve had zero problems. It’s on my 07 hatchback focus and works great!



by:
Ford Focus

Just a note to let you know that the installationof the trailer hitch on my '07 Ford Focus could not have been easier. Using it for light duty hauling with my utility trailer. Easy ordering, fast delivery, simple installation, works as stated. Could only be happier if you came and put it on for me. LOL



by:
2002 Ford Focus

The hitch got her fast install was a breeze took me 20 mins didn't have to drill no holes on my 02 focus sedan and the wire to help you get the bolt through the frame was definitely a plus



by:
Ford Focus

what a great package. everything needed for connecting this receiver is in the box. Wiring was included also. The instruction video and sheet are great. about 45 minutes to install.



by:
2007 Ford Focus

Easy installation and looks nice. The only thing I did not like is I thought it said no holes needed to drill for my 2007 hatchback Ford Focus. Only one hole needs to be drilled, but I didn't have a drill, but I was able to borrow one.



by:

Relativly understandable instructions.i have the advantage of installing hitches,and having a lift.took me an hour after delivery.very cool and easy.



by:
Ford Focus

We received this order very quickly and it was definitely the right hitch for a Focus hatchback. It installed fairly well with ordinary tools but the directions from the manufacturer were somewhat unclear. A few of the spacer and washer parts did not fit as supplied, with one having a hole too small for the bolt to go through and another was too long to be usable. One 1/2" hole needed to be drilled in the car's frame for this hitch to be installed on the ZX5 model hatchback.

Focusdriver profile picture

Focusdriver

4/21/2016

Thanks, the hitch continues to work well on the car for holding a bike rack



by:
2005 Ford Focus

I bought this with the intention of installing it myself, but I talked with a mechanic just in case. After finding the installation video for my car, it was actually a piece-of-cake to install, it fit perfectly, and it even included special little tools I needed to make the installation easier. I have moderate mechanical ability, but I had no problems.

One year later, I have used this hitch with a utility trailer to haul some wood and brush, and to move my kid in and out of college. The hitch, and the wiring kit I bought with it, have worked fine. I have checked the bolts once or twice, and everything is attached fine.

I would recommend this hitch to friends, and will probably get one for my next car.



by:
2006 Ford Focus

So far, so good.

I got the trailer
hitch installed with pretty minimal effort and I have zero experience attaching anything to the underside of cars. I have yet to actually use the hitch.

About drilling the hole: I have a small drill kit I use around the house for shelves and such. The drill strained slightly to get through the car metal, but was fine. It only took me a couple of minutes all told.

About tightening the nuts: I used a normal socket wrench from a kit at first, but then noticed the torque requirement . So I had to buy a torque wrench and a long socket. Some of the bolts stick out farther than can be accommodated with a short socket.


Things I had to buy for this install:
1. 1/2" drill bit
2. 3/4" long socket
3. torque wrench



by:

This is an excellent product. Fantastic welding and construction. The packaging was also very good and delivered speedily by UPS. Only problem, not for my vehicle. Oops. But, I talked to Customer Service, Jonathan, and the revised product should be here Monday (this is Thursday). I'm happy with the company and the assistance they gave me.

Jeff H. profile picture

Jeff H.

10/23/2017

That little puppy works just fine. I like it.



by:
2005 Ford Focus

All the pieces came quicker than I thought. They actually shipped them July 4th (Sat) morning. i got them the following Tue. I wasn't able to get to putting it on until the following Saturday.

The hitch was a little too wide for my tow brackets on the car. I called support and the person I talked to eased my fears about hammering the pieces a little wider to make them fit. I ended up having to use my sledge hammer to get the end of the flange that connects to the frame into the correct position. It was about 3/8" off.

I expect this is due to variance in the vehicles.

The paper instructions that came with the part didn't seem to match. However, the instructional video online was top notch. I would not have even attempted this without the video.

The leader to pull the bolt and block through the frame to the hole, is just brilliant and worked like a charm.

I had one bolt that for some reason would not thread onto the last carriage bolt. I was able to pick up a replacement at the local hardware store no problem.

I was able to use various instruction videos for other body style and years of my vehicle for installing the wiring harness. It actually went pretty smoothly once I figured it out.

I ordered the wrong end cap (2") for my hitch and they automatically sent me the correct one (1 1/4"). Thank you. :)

I am planning on purchasing a second hitch for my other vehicle in a month or so and I would definitely recommend etrailers.com to a friend. In fact I already have. Their price was right, fast on delivery and very helpful, which was important as I do not have a good track record with my vehicle projects.

Thank you
Jeff C.



by:
2002 Ford Focus

We purchased a hitch and wiring for the lights. Everything worked just as it was explained. It was the second hitch I bought from etrailer, the first was back in 2005, and both times product and service was excellent. Product was delivered quickly and just as described, if I had any questions they gave me phone # to call. I received an e-mail with links to videos to help with the assembly, and after installed, the wiring and hitch worked just as they were supposed to. I would recommend, and have recommended, etrailer to people I know that were looking for a hitch for their car or truck.



by:
2007 Ford Focus

This is the third hitch that I have bought from etrailer. they always know what you need for your vehicle, have it in stock and ship it quickly, at very good prices ... the first 2 hitches were hidden hitch brand, this one was draw tite. the hidden hitch came with extra hardware (spacers), the draw tite did not, and I had to use some of the hidden hitch spacers to install the draw tite hitch. everything installed easily and quickly. shipping a few extra spacers with the hitch would be nice.



by:
2007 Ford Focus

Fast shipping, easy installation, highly recommend etrailer! I was most impressed with the supplied fish wire and how easy it was to position a bolt and spacer in a hard to reach spot. Hitch installation took less than 30 minutes. Wiring was easy also...but took a little longer as patience was needed while finding the correct signal/brake wires for the corresponding trailer wires. My trailer was older so I ended up completely re-wiring it with new wires and lights. Overall experience was very positive, no doubt l will buy my next hitch from etrailer.

Kevin profile picture

Kevin

7/5/2020

Used the hitch a dozen times in the last year and so far so good!



by:
Chevy Equinox

It is precisely what it was supposed to be. Instructions were good, all the parts were there. I would have liked to know about the difficulty of installing the one bolt inside the tube up front, but it is installed, and performs its task just fine. The shipping was quick, and the price was well in line.

My car is an SVT, and there is an interference with the duffuser and the hitch. I lnew this going in, however.



by:
2003 Ford Focus

"Almost" an easy install. Fishing the forward bolt on the passenger's side was laborious and disheartening. It took about an hour and several missteps before I finally got it done. I did it first since it was clear at the outset that it would be the most difficult. After that it was very straight forward. Did it in my driveway and did not even have to put the car on jack stands.
The wiring access points were total nonsense; they referenced some unknown, possibly non-existent points and that was it, they never explained where these ghost points were. They tried to sell me an expensive wiring adapter which was totally unneeded (all you need is a flat 4-wire trailer connector, the expensive one is for vehicles with separate brake and turn signal bulbs), and the video for its installation refered to another brand of vehicle completely. Absolute rubbish.
Hardware good, wiring bad.
2003 Focus SE Sedan.

The wiring access points were total nonsense; they referenced some unknown, possibly non-existent points and that was it, they never explained where these ghost points were. They tried to sell me an expensive wiring adapter which was totally unneeded (all you need is a flat 4-wire trailer connector, the expensive one is for vehicles with separate brake and turn signal bulbs), and the video for its installation refered to another brand of vehicle completely. Absolute rubbish.
Hardware good, wiring bad.
2003 Focus SE Sedan." />


by:
Ford Focus

HintMy car, a Ford Focus ZX3 hatch back required one hole drilled. I first mounted the hitch with the other three bolts, and then drilled the hole for the fourth bolt as directed. The problem then was how to remove the burr that extended on the blind side of the car’s frame where I couldn’t reach? Hint 1) I used a medium size Allen wrench, the long end secured in a drill motor. I inserted the small end into the hole by tilting it and proceeded to free spin it on high speed in side then drew back unto the inside surface with the burr, it removed easily. Hint 2) I used a combination of heavy thread or fish line could be used, and wire to insert the last bolt. First, fish the bent wire with small hook on end through the ½” hole you drilled and back out the access hole, then hook the thread and draw it back through. Second, thread it through the washer block and tie it around the tip of the bolt and trim excess. Third fish the washer through the access hole and using the bent wire position it over the ½” hole, then pull on the thread as you feed the bolt through, while assisting with bent wire. After bolt is extending through pull and rotate it, until the square neck of the carriage bolt aligns with the square hole of the washer and fully extends down. Finally add conical washer and nut and tightened. .



by:

First of all the customer service is excellent.
I
received my hitch quickly. The installation was fast and it fit perfect. I'm excited I have my bicycle rack on my car for some out of town rides. Thank you etrailer.



by:

Fine looking installation. After I gathered the tools, time to completion was just 30 minutes. Very easy, and I appreciated having the wire to pull the bolts included in the kit.

Roy A. profile picture

Roy A.

7/20/2015

Everything is working great. Ill be ordering a hitch and wiring kit for our 2014 Accord soon.



by:
2006 Ford Focus

The installation documentation was easy to read and follow, and the product was easy to install. It works great. I'm very happy with not only the product, but with the support I got as well when there was a minor issue.

Russell profile picture

Russell

4/4/2018

The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!



by:
2002 Ford Focus

The Draw-Tite Sportframe trailer hitch was a perfect fit for my 2002 Ford Focus. Installation was a snap and it looks great. Perfect for my two-bike carriers. And, as always, Etrailer's quick shipping, great prices and superb customer service makes it the place to do your trailering shopping. I'm a satisfied repeat customer.



by:
2007 Ford Focus

Ridiculously easy install. I spent more time looking for my 3/4" deep well socket than I did installing the hitch. All told, probably 35 minutes or so, and I was good to go. Added my bike rack and I've been hitting the trails every day. I've made a couple other orders with Etrailer in the past, and they've always shipped quickly and arrived as expected. On my next car, I'll buy the hitch from Etrailer.



by:
2001 Ford Focus

Excellent quality, I HIGHLY SUGGEST actually reading and watching the installation video, I did NOT and attempted to install MY WAY, doing so resulted with much frustration and lost time, I finally got it installed, being very upset with the much work and frustration, I then decided to watch the installation video, and seen what a IDIOT I was. This particular installation REQUIRES the little tidbits ET gives to have a quick non frustrating installation. I >>DO<< suggest that much of the printed instructions could be eliminated if there was a picture or diagram of the different nuts and bolts with their I.D. I actually took a picture of the hardware with it all laying on a 8x10 sheet of paper, I would submit but I lost it.


25
102
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Hitch Recommendation for a 2004 Ford Focus
    Yes, the hitches for the sedan 2004 Ford Focus will also fit the hatchback models. For example, the Draw-Tite part # 24692 that you referenced will fit either model. For trailer wiring you would want the part # 18252. For a hitch ball you would part # 19256 for 1-7/8 inch ball or part # 19258 for 2 inch ball.
    view full answer...
  • Weight of Draw-Tite Class I Receiver Hitch # 24692
    The hitch as shipped weighs about 26 lbs, but the hitch minus the sipping box and packaging weighs right at 20 lbs. If you'll be towing with the hitch, you'll also need the following equipment if you don't already have it: Trailer Wiring Harness, part # 119178KIT 1-7/8 Inch Trailer Ball, part # 19256 2 Inch Trailer Ball, part # 19258 Before attempting to tow with your Focus, please consult the owner's manual for its towing capacity.
    view full answer...
  • Hauling Scooter With 1-1/4 Hitch Receiver
    We can give you the tools to achieve what you're wanting but your vehicle is limited when it comes to hitch sizes and capacity. Since you only have 1-1/4" hitch options we don't have a lot of towing options for your Challenger X Scooter. We also can't use an adapter for the hitch as it will cut down the capacity too much to where it could not handle the weight of your scooter. Best thing you can do is get a specific trailer for your scooter. If you have a 2005 Ford Focus hatchback or...
    view full answer...
  • Is Hardware Included for Draw Tite Hitch 24692
    Yes, all the necessary hardware to install the Draw-Tite Class I Sportframe Trailer Hitch Receiver Hitch, part # 24692, is included. If you mouse over the alternate pictures on the product page, you will see a picture of the hardware.
    view full answer...
  • Will Draw-Tite Class I 1-1/4 Hitch # 24692 Fit 2000 Ford Focus Hatchback
    The item you selected, Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4, part # 24692, will fit your 2000 Ford Focus ZX3 hatchback. Part # 24692 will also fit the Ford Focus sedan model. If you have the Wagon model, you will need Draw-Tite Sportframe Trailer Hitch Receiver, part # 24682. If you are going to be towing, you will need wiring, draw bar, hitch ball, pin and clip to complete your towing setup. For wiring, I would recommend 4-Pole Hardwire Kit Including...
    view full answer...
  • Trailer Hitch for a 2007 Ford Focus ZX5
    The SVT models of the 2003 Ford Focus ZX5 will have a different fascia design called a street appearance package. There should be SVT badged on the back somewhere and possibly right on top of the motor. It is also possible that you will see a P30 in the VIN number in positions 5,6, and 7. The definitive way to know for sure is to have a Ford dealer run the VIN through their computer system. If you do not have an SVT model then you can use trailer hitch # 24692. I have linked a video showing...
    view full answer...
  • Recommended Trailer Hitch and Cargo Carrier for Wheelchair on 2006 Ford Focus ZX5
    Your 2006 Ford Focus ZX5 SES does not have a hitch that is rated past 200 lbs tongue weight or class 1 with the 1-1/4 inch receiver based on the way the vehicle is made and its capacities. My recommendation is the 19x47 Curt Cargo Carrier # C18110 which weighs 30 lbs. The weight of the carrier needs to be subtracted from the 200 lb hitch capacity to give you the remaining cargo capacity for the wheelchair. For your trailer hitch, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver...
    view full answer...
  • My 2 Inch Hitch Adapter Will Not Fit My 1-1/4 Inch Hitch Receiver on 2005 Ford Focus
    The item you selected, Draw-Tite Class 1 Sportframe Trailer Hitch, part # 24692 is not compatible with a 2 inch adapter or reducer, part # 80303. Part # 24692, is a Class 1 hitch and is designed to not to work with a 2 inch adapters, because of the weigh capacity of a Class I hitch. The protrusion in the receiver is put there on purpose by the manufacturer to prevent overloading or using adapters. Whenever a 2 inch adapter is used on a 1-1/4 hitch receiver, it reduces the weight capacity...
    view full answer...
  • Trailer Hitch and Wiring for a 2000 Ford Focus Sedan
    I recommend Draw-Tite Class I Hitch, part # 24692 for your 2000 Ford Focus sedan. It features a no-drill installation and also includes pin and clip. You will need a ball mount and either a 2 inch trailer ball, part # 19258, or an 1-7/8 inch trailer ball, part # 19256. You can usually get rental trailers with either size of coupler. To wire your vehicle for towing, you would use a taillight converter hardwire kit, part # 119178KIT. I have linked you to the installation instructions for...
    view full answer...
  • Cargo Carrier and Bag for a 2005 Ford Focus
    I have a solution for you, but the cargo carriers that use the Rola TuffBak 59119 are slightly too large for the 2005 Ford Focus' available Class I hitches. Class I hitches can only handle weight to a certain point, and most manufacturers make their hitch receivers with a stop that prevents higher class accessories from being used. You can get similar functionality out of a etrailer Cargo Bag, part # e98990 and an appropriate sized carrier. For a hitch, I recommend Draw-Tite brand...
    view full answer...
  • Will the Draw-Tite Sportframe Class I Trailer Hitch # 24692 Fit the 2003 Ford Focus Wagon
    I have a trailer hitch that will fit your 2003 Ford Focus Wagon, however the Draw-Tite Sportframe Class I Trailer Hitch, # 24692, that you referenced will only fit the sedan models. The sedan and wagon models use slightly different mounting location for a trailer hitch. For your vehicle, you will want the Curt Class I Trailer Hitch, # C11296. I have also attached the installation instructions. If you are looking into carrying a bike rack or cargo carrier, I will be happy to provide...
    view full answer...
  • Trailer Hitch Recommendation For 2007 Ford Focus
    It appears you are looking for a trailer hitch for your 2007 Ford Focus. The Draw-Tite Sportframe Trailer Hitch Receiver, part # 24692 is a fit for your Focus if it is a sedan and not the ST model. This is a Class l hitch and has a 1-1/4 inch receiver opening. I have attached a link to an installation of this trailer hitch on as 2007 Ford Focus you can check out. If you plan on towing with your Focus I recommend the Sportframe Drawbar Kit, part # 3593. This includes a 1-1/4 receiver and...
    view full answer...
  • Is there a Trailer Hitch for the 2005 Ford Focus with Street Appearance Package and No Drilling
    If your 2005 Ford Focus is a sedan then there are no trailer hitches that are confirmed to fit the models that have the Street Appearance package. If you have a hatchback then # 24692 is likely to fit but there is drilling required for the installation. You can see the installation steps in greater detail in the instructions and video I have linked for you.
    view full answer...
  • Will CURT Trailer Hitch Receiver # 11294 Fit My 2001 Ford Focus LX Sedan
    Yes, the item you selected, CURT Trailer Hitch Receiver, part # 11294, will fit your 2001 Ford Focus 4-door LX Sedan. You will not need to trim the rear bumper fascia to install the # 11294 hitch on your Focus. The Curt # 11294 includes a draw bar, pin and clip. To complete your towing setup you may be need the following: Draw-Tite Wiring, part # 119178KIT 1-7/8 Inch Hitch Ball, part # 19256 2 Inch Hitch Ball, part # 19258 The other hitch available that will fit your Focus is Draw-Tite...
    view full answer...
  • Spacer Block Positioning when Installing Draw-Tite Trailer Hitch 24692 on a 2006 Ford Focus Sedan
    I think the key to installing the Draw-Tite trailer hitch # 24692 is that little stipulation in the instructions that states the 2-hole block position varies by model. The way that I look at the instructions, there is one 2-hole spacer that can either go on the driver side (sedan) or passenger side (hatchback). It sounds like you have it positioned correctly. You will need to make sure that the driver side of the hitch is inboard of the tie down hook and that the passenger side is outboard...
    view full answer...
  • The Best Trailer Hitch and Wiring for a 2004 Ford Focus ZX3
    The trailer hitch C11296 will not fit your 2004 Ford Focus ZX3. It was designed to fit the wagon. The correct trailer hitch for your 2004 Ford Focus ZX3 is # 24692. If you plan on doing some towing the correct ball mount is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you will need # 18252. I have linked videos to demonstrate installing the trailer hitch and wiring. If you would like to use the trailer hitch for a bike rack or cargo...
    view full answer...
  • 2007 Ford Focus HatchBack Hitch and Wiring Recommendation
    For your 2007 Ford Focus hatchback the Draw Tite hitch part # 24692 is a confirmed fit that will work well. I attached an install video for this as well for you to check out. For trailer wiring you need the part # 18252 which is a confirmed fit as well. For a ball mount you need the part # 3593 with hitch balls # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball.
    view full answer...
  • Will a Draw-Tite Trailer Hitch Fit a 2005 Ford Focus ZX4
    For the 2005 model year all Ford Focus sedans were ZX4 and would then either be an S, SE, or SES. If it only has ZX4 on it then it is an S model. Your 2005 model would not have the Street Appearance Package because that was not available until the 2006 model year. If a hitch won't fit there isn't anything that you can safely do to it or the vehicle to make it fit. It can make the hitch unsafe to use. But if you have the regular sedan (ZX4) then this will not be an issue.
    view full answer...
  • How to Carry a 222 Pound Motorcycle with a 2006 Ford Focus
    Yes, carrying your motorcycle on a hitch mounted carrier on your 2006 Ford Focus is definitely going to be a problem. You've already come to the answer, the hitch has a maximum tongue weight of 200 pounds and your motorcycle is more than that. Plus you need to factor in the weight of the motorcycle carrier as well. In addition to that, the hitch may be rated for 200 pounds but according to an online copy of the Focus' owner's manual its maximum tongue weight is even less than that. The...
    view full answer...
  • What Year Range and Model Ford Focuses does the Draw-Tite Part # 24692 Fit
    The Draw-Tite part # 24692 that you referenced will fit the following year range and model Ford Focuses: 2007 - 2007 Ford Focus 3-Door Hatchback 2007 - 2007 Ford Focus 5-Door Hatchback 2000 - 2004 Ford Focus Sedan 2005 - 2007 Ford Focus Sedan, except ST 2005 - 2006 Ford Focus ZX3 Hatchback 2002 - 2004 Ford Focus ZX3 Hatchback, except SVT 2002 - 2006 Ford Focus ZX5 Hatchback 2003 - 2004 Ford Focus ZX5 Hatchback, except SVT I attached an install video for you to check out also.
    view full answer...
  • Trailer Hitch Recommendation for 2005 Ford Focus Sedan and Class I Hitch Adapter
    The trailer hitch I recommend for your 2005 Ford Focus Sedan is the Draw-Tite Class I Sport Frame Receiver Hitch # 24692. This hitch offers a 1-1/4 inch, Class I receiver with a maximum towing capacity of 2,000 pounds and max tongue weight of 200 pounds. It is important to keep in mind that if your vehicle's towing and tongue weight capacities, and to not exceed those capacities to ensure safe towing. Since this is a Class I hitch with the stop tab, you will want to use a hitch adapter...
    view full answer...
  • Trailer Hitch Recommendation for a 2007 Ford Focus Towing Motorcycle Trailer
    For your 2007 Ford Focus Sedan the Draw-Tite part # 24692 would be a great choice for towing a small trailer as long as it stays under the capacities you mentioned. Your trailer would need to be lighter than 2,000 lbs and have a tongue weight of less than 200 lbs for the hitch. For the vehicle you would need to check the owners manual to determine what the vehicle's towing capacities are as well. To complete your towing setup, you would also want a ball mount and part # 19256 for 1-7/8...
    view full answer...
  • Will the Draw-Tite Sportframe Trailer Hitch Receiver # 24692 Fit a 2007 Ford Focus Hatchback
    The Draw-Tite Sportframe Trailer Hitch Receiver # 24692 that you referenced is confirmed to fit the 2007 Ford Focus Sedan (excluding the ST), the ZX3 Hatchback, and the ZX5 Hatchback. It will fit your Focus and give you a Class I trailer hitch with a 1-1/4" receiver rated for 200 lbs. You will want to make sure to check your owner's manual for any weight ratings when using a trailer hitch. I have attached a video of the Draw-Tite # 24692 being installed on a similar 2007 Focus for you...
    view full answer...
  • Replacement Hardware Recommendation for a Draw Tite Hitch on a 2003 Ford Focus
    The correct Draw Tite hitch for your 2003 Ford Focus ZX5 would be the part # 24692. To order replacement hardware for this hitch you would want the part # RHK. On the product page you would need to enter the part number of the hitch and then select the hitch manufacturer from the drop down menus and we will ship you out the correct hardware. I attached an install video for this hitch that might be helpful as well.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.