1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36313
lowest price pledge
Retail:$324.62
Our Price: $176.57
You Save: $148.05
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 39 lbs
Quantity: 
In Stock
36313 - Class II Draw-Tite Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36313 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (47)
  • Q & A (22)
  • Videos (4)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 36313

  • Draw-Tite
  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36313 Draw-Tite Class 2 Trailer Hitch Receiver

90309 Hidden Hitch Class 2 Trailer Hitch Receiver



36313 Installation InstructionsInstallation Details 36313 Installation instructions

This Product Fits The Following Vehicles

2000 - 2005 Mercury Sable Sedan

2000 - 2007 Ford Taurus Sedan

2000 - 2005 Mercury Sable Wagon

2000 - 2005 Ford Taurus Wagon



California residents: click here


Video of Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2006 Ford Taurus

Today on this 2006 Ford Taurus we are going to install a hitch, part number 36313 from Draw-Tite. This will also going to apply to part number 90309 from Hidden Hitch. What we are going to do is actually take down the tie down brackets here on the bumper. We will go ahead and lower our exhaust now, to get a little more working room. We will spray down the rubber hangers and then just push them off. Next thing I am gong to do is take down the carbon canister here. We have to disconnect the electrical plug right here. And also disconnect the vapor hose right here.

Sometimes there is a clamp on here, you can take a pair of pliers and squeeze it, but this one apparently does not have one. So we can just simply pull it off and then we will just lower the canister by the four bolts that hold it in place. Lets go ahead and work it off, we basically need to get it out of the way for a little bit. We cannot completely disconnect the whole thing, just get enough working room is all we need. At this point we can actually see now where the hitch will actually attach to the vehicle. And then also it is going to attach to where this bolt is right here, our energy absorber. The hitch will install on the frame using this hole right here. And on the drivers side it will be the last hole in the frame towards the front. We will go ahead and start taking off the bolts for the energy absorber here, there is going to be one on each side.

At this point we can go ahead and start installing the hitch. We will install the hitch using new fasteners supplied with the kit and we will go ahead and hang the hitch by the bolts and nuts that we just removed the bolts from. We have our bolts started but we are not going to tighten them down because we still need room to move the hitch a little bit. We will go ahead and install our hardware for the frame now. What we are going to do is install a block which is going to sit inside the frame like this, and it is so close to the extra holes we can push it down with our fingers to get it into the right spot. All right next we will go ahead and install our handle nut which is going to go through here. You will have to bend it just a little bit to match the top of the hole, and we can install our bolt. On this side what we need to do is enlarge this hole a little bit by sticking the handle end of a breaker bar to pry it. Just kind of pull down a little bit, you can distort the metal a little bit just enough to get both pieces inside and to hold it together just use some electric tape. We have some electric tape around the ends of the block and the handle nut. Work it in, and again I am going to leave that loose.

And we can start snugging down the bolts that are back up on the energy absorbers. All right now we can start snugging down the bolts that go through the frame and then we will start torquing down the bolts to their proper specifications. All right once our bolts are all torqued down we can start putting the exhaust back into place along with the carbon canister. And our hose gets routed through the hitch and back into the carbon canister too. And there you have it for part number 36313 from Draw-Tite.


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36313

Average Customer Rating:  4.8 out of 5 stars   (47 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

- 36313
by:
2003 Mercury Sable

The conversation and phone purchase and knowledge of product was exelent. The tracking of delivery was an added service and delilvery of product was as on schedule. I found that it should have been a two man install instead of just me. But all in all it fit very well on my 2003 Mercury Sable. It took me 4 hours to install with me alone. I would say if I had to do it all over again with one install behind me I could cut that number in half. 10884



- 36313
by:
2003 Ford Taurus

Mounting was tough with nobody to help but what made it great was everything lined up and bolted in per video. The only problems having a car that's 12 years old was the rusted bolts on the gas reclamation canister and the rearmost mounting bolts. I'd suggest lubricant with rust break a few times before attempting on old vehicles. The reason for four instead of five stars is that the muffler is now hitting the tow bracket on bumps. I'll have to consider new rubber hangers to see if this does the trick. This unit profile is almost invisible, and overall value, bulletproof. Thanks for a great product. I will be revisiting etrailer.com when need be. 262359


Comments
My hitch is perfect. With a few drawbacks being rusted fasteners which are to be expected on an older vehicle. Now considering a hitch cargo carrier.
Steve F - 06/18/2017

25098

Thanks for the follow up and feedback. I have provided a link to our current offerings of 1-1/4 inch hitch compatible cargo carriers.

-- Rachael H - 6/19/2017


- 36313
by:

FAST SHIPPING, GREAT PRODUCT AND VERY EASY TO INSTALL... THANKS! 216133



- 36313
by:

The part does what it was purchased to do. Satisfied customer. 727211



- 36313
by:
2003 Ford Taurus

Lined up pretty nicely, could use more robust packaging, poked through side of carton during shipping, overall happy.. 706675



- 36313
by:
2003 Ford Taurus

I installed the products my self Haven’t had any problems Great people to work with 489923



- 36313
by:
2007 Ford Taurus

As always, I am completely satisfied with the Draw-Tite hitch I purchased. It installed easily with the directions and hardware supplied as I expected it would when I ordered it. The price was also great and I am sure I will be purchasing more items from etrailer.com in the future. Thanks for being a dependable online one-stop shopping supplier. 472040



- 36313
by:
2006 Ford Taurus

Extremely difficult to instal, hardware provided doesn't help matters at all (bolts are too long/nuts too large too fit with any sort of ease). The directions are minimal. Have a friend help you and plan on a frustrating job if you do it yourself. 427293



- 36313
by:
2004 Mercury Sable

I received my hitch in a very timely manner, it was the correct model for my vehicle, and it was a very easy install, I love the product I received and the price was the best around. I highly recommend this company. Respectfully, Rick K 389953



- 36313
by:

very stout hitch. good installation make sure you pay attention to how the tabs go to the rear. that was an operator error. the shipping came a week earlier than expected. all around great experience 355790



- 36313
by:
2004 Ford Taurus

great service 328719



- 36313
by:
2003 Ford Taurus

The hitch, it's installation, and e-trailer's support are all first class. The video was helpful for the installation of this hitch to my 2003 Ford Taurus. It was very easy and straightforward taking me just under 30 minutes to install. 312994



- 36313
by:
2002 Ford Taurus

Etrailer was easy to buy from, great products, great service and fast shipping. I will buy from etrailer again for sure 312689



- 36313
by:
2006 Ford Taurus

All the items in my order arrived today. Thanks for your continued follow-up on this order and the speedy shipping once you had the item on hand. I also appreciated the installation video and pictures on etrailer. com. I routinely recommend that my customers reference your website for install instructions and product explanation videos. Keep up the good worK. 286880



- 36313
by:
2004 Ford Taurus

Hitch went on, without a hitch! And great customer support 267955



- 36313
by:
2007 Ford Taurus

hitch was easier to install than predicted. excellent quality hitch. thank you draw-tite. 256710



- 36313
by:
2004 Ford Taurus

Works as advertised. The video instructions were accurate and easy to follow. We use it all the time now for our bike rack, which would have otherwise been impossible on our Ford Taurus. Make sure to have plenty of WD-40 on hand when installing. Removing parts from the frame was the hardest part due to built up rust deposits. Installing the mounting nuts can be a little tricky too, you just need to be patient with it. 249248


Comments
Still works with no issues since we installed it. I would buy a trailer hitch from this site again.
Ben - 05/09/2017

23717

- 36313
by:
2006 Ford Taurus

Low profile custom hitch receiver for Ford Taurus. It is solidly built and fits very well with little installation effort. Suggested install time was well estimated. Pictures and video on the etrailer.com site much easier and faster than reading install instructions. 241751



- 36313
by:
2006 Ford Taurus

easy to install hitch and wiring was simple using a lift rack that I had to rent for $10 great product used it to pull a bass boat to car wash but mainly used for a small boat and trailer less than 600 lbs 207190



- 36313
by:
2006 Ford Taurus

Hitch and wiring harness arrived well packaged and no damage. Products seem to be excellent quality. Printed installation instructions with the hitch are adequate, however, the on-line video helped tremendously. Similarly, the on-line video for installation of the wiring harness made that task quite easy. 133811



- 36313
by:
2003 Mercury Sable

I single handedly installed mine this morning in about an hour and a half. At first it looked like it was going to be a bear, but everything lined up and installed perfectly. The frame holes in the car seemed too small, but with patience I got the nut in the hole. I hardly put any bends in the nut handle.This unit installs very nicely and is constructed well. I am thoroughly pleased with etrailer, the speedy shipping, and I highly recommend them. I will be here to buy again! 102663



- 36313
by:

The hitch was delivered today and was installed on the car by late after noon. I've been retired for 5 years and the most exercise is getting out of the recliner. The installation was quite a contest by I won the battle, thank you. 100698



- 36313
by:
2001 Ford Taurus

Perfect Fit. Although video showed wrong corresponding body holes, installation went very well. This is a well engineered product and I would recommend it to a friend. Pic shows complete installation including wiring, pin adapter, and one of the two drawbars I purchased as well. Looks great! 83631



- 36313
by:
2006 Ford Taurus

Product went on vehicle just as described. No adjustment to hitch needed. There were to wrong size bolts sent with kit,but other than that the hitch went on just as the instructions said . This was a good buy, prompt shipment. Thanks Tom 81183



- 36313
by:
2002 Ford Taurus

Went on with no problems. Great service 79338


30
52
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Best Hitch and Bike Rack Recommendation for a 2007 Ford Taurus
    Actually the Curt Hitch part # C12232 and the Draw Tite Hitch part # 36313 that you referenced are both very similar. They are basically two different manufacturers versions of the same hitch. What gives the Draw Tite hitch the edge of the Curt hitch though is that it does not require a stabilizer strap like part # 18050 when used with a non-supported load like a bike rack like the Swagman XTC 2 part # S64670. If you failed to use the strap you would void the warranty of the hitch...
    view full answer...
  • Trailer Hitch For 2003 Mercury Sable LS Sedan
    I have attached a video that shows the Draw-Tite Trailer Hitch, part # 36313 being installed. The baffle you described on the right side of the hitch is designed to allow you to run the hose for the carbon canister through the right side bracket. Not all vehicles this hitch fits have the carbon canister installed. Since the brackets for attaching to the frame on your Sable are designed differently, I think the Draw-Tite Trailer Hitch, part # 24699 may have a less visible look. Both...
    view full answer...
  • Recommended Hitch to Pull 2003 Taurus Pulling 20-Foot Trailer
    According to my research the maximum trailer towing capacity for a 2003 Ford Taurus is 1,750 lbs. I recommend checking the owner's manual to make sure you do not exceed the towing capacity for your Taurus. You will also want to check the total weight of your trailer. It should be weighed fully loaded. The trailer hitches we offer for your Taurus are either Class l or Class ll hitches with a 1-1/4 inch receiver opening. I recommend the Draw-Tite Trailer Hitch, # 36313. This is a Class...
    view full answer...
  • Trailer Hitch and Wiring for a 2004 Mercury Sable to Tow a Boat Trailer
    All of the trailer hitches for the 2004 Mercury Sable are Class II hitches with 1-1/4 inch receivers. They are all rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight. But you will need to check the Sable owner's manual to determine its towing capacity. Whichever is lower, the hitch or the vehicle, is the capacity you need to go by. For a hitch I recommend Draw-Tite trailer hitch # 36313. For a ball mount use # 36061. For a 1-7/8 inch ball you can use # 19256 and...
    view full answer...
  • Replacement Hardware Availability for Draw Tite Hitch 36313
    The correct hardware kit you would need is the part # RHK for the Draw Tite hitch part # 36313 that you referenced. You would just need to select the hitch manufacturer from the drop down menu and then enter the part number of the hitch and we will ship you out the correct hardware.
    view full answer...
  • Is the 2003 Ford Taurus Capable of Towing a Trailer for Power Chair with an 1-1/4 Trailer Hitch?
    Your 2003 Ford Taurus is classified as a light duty towing vehicle. The amount of weight you can safely tow depends on the type of engine you have in your vehicle. You will want to check your owner's manual to confirm what your specific model Taurus is capable of. It's also important to know how much the total trailer will weigh. The Draw-Tite trailer hitch # 24699 you were looking at will have a weight rating of 200lbs tongue weight and 2,000lbs towing, but its important to know that...
    view full answer...
  • Trailer Wiring Recommendation for Draw Tite Hitch for 2000 Ford Taurus
    We have trailer wiring for your 2000 Ford Taurus but the Draw Tite hitch part # 36313 does not come with it. For that you would then also want the part # 118375 which is a confirmed custom fit. The recommended ball mount is the part # 3593 and then for hitch balls you would want part # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch ball.
    view full answer...
  • Installation Hardware for 2001 Ford Taurus Trailer Hitch
    We have exactly what you need. For the installation hardware for the trailer hitch on your 2001 Ford Taurus, you will want part # RHK. Once on the product page, you will simply type in the model number of the hitch you have into the "Hitch Item Number" box below the product title, along with selecting the manufacturer from the drop-down menu. We will then assemble the complete hardware kit for your particular trailer hitch. There are three trailer hitches confirmed to fit your 2001...
    view full answer...
  • Trailer Hitch and Wiring for a 2001 Ford Taurus to Tow Riding Mower/lawn Service Equipment
    There are Class I and Class II trailer hitches available for your 2001 Ford Taurus. The Class II trailer hitches are going to have a higher capacity and thus be stronger than the Class I options. Based on that I recommend going wit ha Class II hitch # 36313. the hitch itself is rated for 300 pounds tongue weight and 3,500 pounds gross trailer weight. But consult the vehicle owners manual for the vehicle towing capacity and, if lower, go by the lower of the two ratings. For a ball...
    view full answer...
  • Can 2007 Ford Taurus Haul a Trailer?
    I took a look at the owner's manual of your 2007 Ford Taurus and it can haul a trailer, though the amount of weight is going to depend on the engine you have. If your Taurus has a 3.0L 2-valve engine you will be able to tow a max of between 800 lbs and 1,250 lbs depending on the amount of cargo, including passengers, you are carrying. If your Taurus has a 3.0L 4-valve engine you can tow a max between 1,000 lbs and 1,750 lbs, again, depending on cargo. I recommend referring to your copy...
    view full answer...
  • Recommended Trailer Hitch for 2001 Ford Taurus SE
    I do have a trailer hitch recommendation for you 2001 Ford Taurus, however since the two models you're referring to are two different generations the hitch you have on the 92 will not fit. I suggest the Draw-Tite Class II # 36313. It's custom fit for your Taurus and doesn't require any drilling to install. For a new wiring harness you will need the Tekonsha # 118375. And a ball mount that comes with the pin and clip # 36061. Hitch ball # 19258 will fit the mount. I've included...
    view full answer...
  • Will the Draw-Tite Trailer Hitch Receiver # 36252 Fit 2004 Ford Taurus Sedan
    The Draw-Tite Trailer Hitch Receiver that was designed for the 2004 Ford Taurus sedan is actually part # 36313. I have attached an installation video for you. Part # 36252 that you referenced was designed to fit the older model of the Ford Taurus sedan so this hitch will not work for you.
    view full answer...
  • Recommendation for Towing 1988 Lincoln Town Car
    If your 2002 Ford Taurus has an 1800 lb towing capacity, I cannot recommend towing anything that would exceed the vehicle's towing capacity. Attempting to do so would damage the driveline of your Taurus. My research indicates that in order to flat tow the Town Car with all 4 wheels flat on the ground, you'd need to do some fairly extensive modifications to the vehicle, it cannot be flat towed as it sits. I'd recommend you use a vehicle that has a sufficient towing capacity and a tow...
    view full answer...
  • Trailer Hitch, Wiring Harness and Ball Mount for 2007 Ford Taurus and 2007 Toyota Camry
    Due to the size of the trailer hitch, there isn't a wheelchair carrier that will work with the hitch that fits your 2007 Ford Taurus. The Draw-Tite Trailer Hitch Receiver # 36313 has a 1-1/4 inch receiver, and each of the carriers with ramps are only fits for 2 inch receivers. So the best option we have for you would be to use a small utility trailer and haul the wheelchair that way. To do this you would also need a wiring harness, the 4-Pole Hardwire Kit with Circuit Tester # 18252...
    view full answer...
  • Can a Different Ball Mount be Used on a Class I or II Trailer Hitch
    There are other ball mounts that will work with 1-1/4 inch hitches. However, on Class I and II trailer hitches such as # 36313 you are supposed to only use the ball mount specified by the hitch manufacturer or it voids the hitch warranty. The use of a different ball mount is an at your own risk type of situation. I have linked the ball mounts we carry for 1-1/4 inch trailer hitches.
    view full answer...
  • Trailer Hitch And Wiring Recommendation For 2003 Ford Taurus
    I did some research and found that the maximum trailer towing capacity for a 2003 Ford Taurus is 1750 lbs. I recommend checking the owner's manual or with a dealership to make sure you do not exceed the towing capacity for your Taurus. You will also want to check the total weight of the trailer you want to tow. It should be weighed in its fully-loaded-ready-to-tow condition. The trailer hitches we offer for your Taurus are either Class l or Class ll hitches with a 1-1/4 inch receiver...
    view full answer...
  • Can Trailer Hitch Be Installed On A Different Vehicle After Accident
    It is not recommended that a trailer hitch be used again if the part of the car that the hitch was installed on was involved in the accident in any way. There can be stress cracks in the welds that may not be visible, and that would compromise the stability and safety of the hitch. If there is no damage to the hitch from the accident and you wish to install it on your 2005 Mercury Sable, you can go to our website and order a replacement hardware kit. I have attached a link to the page...
    view full answer...
  • Replacement Bolts for Draw-Tite Trailer Hitch on a 2000 Ford Taurus
    It sounds like you need the two M10 x 1.50 x 45mm CL9.8 hex bolts. These bolts are available in hardware kit # RHK. The picture is just a generic one of some hardware and not the actual hardware. Enter the hitch number and choose the manufacturer to get the right hardware. This will replace all of the hardware, not just the 2 bolts. The other option is to source the M10 x 1.50 x 45mm CL9.8 bolts locally. It has to be this type of bolt and not the factory ones nor a lower grade. The factory...
    view full answer...
  • Availability of Class II Hitch for 2000 Mercury Sable to Allow Use of Wheelchair Carrier
    We do offer several Class II hitch receivers for your 2000 Mercury Sable. All are the 1-1/4-inch size and rated for a maximum tongue weight load of 300-lbs. I suggest Draw-Tite # 36313. It is likely that the weight of your hitch-mount carrier and your electric cart will exceed this 300-lb maximum. It may also be that your Sable itself cannot handle this much weight; your owner's manual will indicate the car's tongue weight capacity. You will need to confirm the combined weight of the...
    view full answer...
  • Replacement Installation Hardware for Draw-Tite Class II Hitch # 36313 for 2005 Ford Taurus
    For the installation hardware for the Draw-Tite Class II, part # 36313 you'll need the Replacement Hardware Kit, part # RHK. On the product page, type the hitch part number 36313 into the required field, then choose Draw-Tite from the drop down menu and 1 for the quantity. I've linked you to the installation instructions for the hitch, plus an install video you might find helpful.
    view full answer...
  • Recommended Class II Draw-Tite Trailer Hitch for 2001 Ford Taurus Wagon
    I have a solution for you, but the # 36216 hitch will not fit the 2001 Ford Taurus Wagon. I cannot recommend you modify a hitch to fit your vehicle because it will compromise the structural integrity of the hitch as well as not carry the same weight ratings, wouldn't be covered by a warranty as well as damage the frame of your vehicle, and is potentially life threatening if it falls off during transit. The best thing to do is sell your current hitch to offset the cost of purchasing a...
    view full answer...
  • Replacement Hitch Installation Hardware for Draw-Tite Hitch # 36313 on 2005 Ford Taurus
    The Draw-Tite hitch we offer for the 2005 Ford Taurus is part # 36313. You can order replacement installation hardware for it by entering the part # RHK in our search box, entering the hitch number 36313 and selecting the manufacturer Draw-Tite from the drop-down menu. I have linked two articles concerning hitch installation that may be helpful to you.
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Zack K
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
Test Fit:
Shane T
Video by:
Alan C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.