This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36292 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
173.04
58
Select Vehicle:change vehicle
summer hauling headquarters

Price: $173.04

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36292

lowest price pledge

Retail:$283.11

Our Price: $173.04

This item qualifies for free shipping

Quantity: 

In Stock.
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
Draw-Tite
Draw-Tite
Draw-Tite
Draw-Tite
Draw-Tite
Draw-Tite
Draw-Tite

In Use/Installed

for 2005 Chevrolet Monte Carlo 9Draw-Tite
for 2005 Chevrolet Monte Carlo 7Draw-Tite
for 2005 Chevrolet Monte Carlo 8Draw-Tite
for 2005 Chevrolet Monte Carlo 11Draw-Tite
for 2005 Chevrolet Monte Carlo 2Draw-Tite
for 2005 Chevrolet Monte Carlo 10Draw-Tite
for 2005 Chevrolet Monte Carlo 12Draw-Tite
for 2005 Chevrolet Monte Carlo 13Draw-Tite
for 2005 Chevrolet Monte Carlo 5Draw-Tite
for 2005 Chevrolet Monte Carlo 14Draw-Tite
for 2005 Chevrolet Monte Carlo 4Draw-Tite
for 2005 Chevrolet Monte Carlo 1Draw-Tite
for 2005 Chevrolet Monte Carlo 3Draw-Tite
for 2005 Chevrolet Monte Carlo 6Draw-Tite

Videos


  • Draw-Tite
  • 1-1/4 Inch Hitch
  • Class II
  • 300 lbs TW
  • 3500 lbs GTW
  • Concealed Cross Tube
  • Custom Fit Hitch



Draw-Tite Trailer Hitch - 36292

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36292 Draw-Tite Class 2 Trailer Hitch Receiver

90150 Hidden Hitch Class 2 Trailer Hitch Receiver



36292 Installation InstructionsInstallation Details 36292 Installation instructions

This Product Fits The Following Vehicles

2000 - 2007 Chevrolet Monte Carlo excluding High Sport



Video of Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"


Videos are provided As a guide only. Refer To manufacturer
installation instructions And specs For complete information.




Video Transcript for Trailer Hitch Installation - 2005 Chevrolet Monte Carlo

Today on this 2005 Chevrolet Monte Carlo we are going to install part number 36292 from Draw-Tite. This will also apply to part number 90150 from Hidden Hitch. The first thing we need to do is lower the exhaust. There are four rubber hangers on this vehicle since it is dual exhaust. We will spray those down with some lubricant . Use a wood block behind it to give you a little better leverage against the rubber hanger. To lower the exhaust even further what we are going to do is run a strap around the exhaust and connect it to the sway bar right here and we have got one more rubber hanger that we are going to remove so we have plenty of room to work with. We will let the strap lower the exhaust. 01:06

We are looking at the passenger side of the vehicle. We are going to have to remove these three bolts right here. The bolt heads are on the other side of course and we are going to remove those three bolts and that will loosen up the bumper bracket here and the end of the frame. We have got our bolts removed from the frame and the bumper structure. You will see that the bumper structure itself is loose now and being held up by the rest of the bumper cover which is fine. The hitch is going to fit in between this space right here, between the bumper structure and the body. We are going to have to slip it in between there, push the bumper structure up, and then get the bolt started. Also what we are going to do is just on one hole to hold the hitch up we are going to use a small screwdriver to hold everything together to make everything a little bit more closer when you thread in the other bolts. 02:04

We are going to use new hitch bolts to install the hitch through the existing fasteners. We just want to get them started and we will just leave it at that. The next step is to fish wire the bolts into the frame,the attachment points will go towards the front of the vehicle. It is best to use a bolt leader to accomplish that. The kit does not come with that, it is sold separately as part number 80101-1. To use this we are going to push it through the attachment point we are going to use on the hitch and through the frame. Reach in and try to pull it out the access hole. We are going to slide on our block and our bolt is going to fit through that block and go into the frame. Lets push that through now and then we will thread on our bolt. We will push that into the frame and on to this we will loosely install our lock washer and nut. We will do the same thing again back over on the driver side. After that we will torque them down as specified in the instructions. The first bolt you want to get installed is the top bolt. That way everything will get pretty close to lining up and then it will be easier to add your exhaust hanger back to the vehicle. Now we can slip the exhaust back into position. We will take off the strap and lets not forget about the last hanger. With the mufflers reinstalled that will finish it. We have got the vehicle off the lift now, lets give you a couple of measurements. On this particular vehicle from the top of the receiver opening down to the ground is 12 inches and the center of the hitch pin to the outside edge of the bumper is seven inches. There you have it for part number 36292 from Draw-Tite on this 2005 Monte Carlo.


Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36292

Average Customer Rating:  5.0 out of 5 stars   (8 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
- 36292

by: Anthony V.07/09/2014


I needed a hitch to trailer my Street Glide to the Smokey Mts. (my wife would have never made the trip). We were pressed for time and I was afraid of complications with the install (e.g. improper fit or missing parts). To my relief, it went relatively smooth. If I had to complain, I would say that even with the spacers, the carriage bolts are about 1/4 inch too long (it doesn't take much to get the muffler to bump up against them). I put it on by myself with no air tools in about an hour. The hardest part was stabbing the first two holes. I would definitely recommend to a friend. 140351


- 36292

by: Ron P.04/08/2015


Great service. Timely shipping. Products looks great on my 2007 M Carlo and fits perfect. Thanks 184046


Comments

The 36292 hitch fit my 2004 Monte Carlo SS Dale Earnhardt Jr. super charged NASCAR edition perfectly. No cutting no trimming. It went on with a 14 inch to spare under the bumper even with the extra plastic than a regular SS .

-- comment by: Bob - 08/22/2015

14485
- 36292

by: Donna J01/30/2015


I received my hitch yesterday. I haven' gotten it attached to the car yet but I opened the box and was impressed with the quality. Also very impressed with the shipping experience. I ordered on a Tuesday and received it on a Thursday very impressive as the shipping was free. Thank you for a great ordering experience 171850


- 36292

by: b mort07/28/2016


2006 monte carlo ltz. the hitch went on as described without any major setbacks. did it on concrete with a floor jack and stands. 2 men took about 45mins with a cold beverage somewhere around halfway. followed the instructions and glorious success. the hitch looks great and so far works perfectly! 277301


- 36292

by: Pat G.03/30/2015


well made hitch. It took me about 2 hours to install by myself witch included jacking up the car and installing it laying on my back and clean up. Everything lined up good. Shipping was on time. 181758


- 36292

by: Mitch Wagner06/02/2016


Very happy with the hitch. Mounted it myself with no problems. Fit perfect. 255671


- 36292

by: Brad Coen06/21/2017


Fit right on my car with about 1 hour time . 397139


- 36292

by: Doug C04/09/2016


Very good reasonable price! Love it 243494


8
8


Ask the Experts about this Draw-Tite Trailer Hitch


  • Trailer Hitch Recommendation for 2000 Chevy Monte Carlo for Towing Motorcycle Trailer
  • For a trailer hitch confirmed as a fit for your 2000 Chevy Monte Carlo the Draw Tite part # 36292 would be a great option for towing a small motorcycle trailer. For wiring you would need the part # 119178KIT, for a ball mount part # 36061, and for hitch ball part # 19258 for a 2 inch ball, or part # 19257 for a 1-7/8 inch ball.
    view full answer...

  • Confirming Class II Hitch # 36292 Fit for 2001 Chevrolet Monte Carlo SS
  • The Draw-Tite Class II trailer hitch you referenced, part # 36292, will fit all models of the 2001 Monte Carlo, including your SS. The only exception to the fit of this hitch is the SS model with the High Sport appearance package. It will fit fine since you indicated you do not have the High Sport package with ground effects. This 1-1/4-inch hitch bolts on using included hardware and installation requires no drilling. You can refer to the linked installation video and help articles for...
    view full answer...

  • Will Draw-Tite Trailer Hitch 24689 Fit a 2004 Chevy Monte Carlo SS
  • From what I could find the High Sport model of the Monte Carlo refers to one of the 6th generations specialty NASCAR editions of the vehicle. It seems to be associated with the Dale Jr. edition. If your 2004 Monte Carlo is an SS but not one of these NASCAR editions then trailer hitch # 36292 will fit. If you plan on doing some towing the correct ball mount is # 3590. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring use # 119178KIT. I have linked...
    view full answer...

  • Trailer Hitch Fit for 2004 Chevrolet Monte Carlo SS Dale Jr. Edition
  • The Draw-Tite Trailer Hitch # 36292 that you referenced may fit your vehicle, but there are some things you will want to measure first. We do not offer a trailer hitch that has been confirmed to be a match for the 2004 Monte Carlo SS Dale Jr. Edition. First you will want to ensure that you can gain access to the mounting holes in your vehicle's frame. The installation details are linked for you. The diagram in the instructions will give you a good idea as to where the trailer hitch installs....
    view full answer...

  • Does Draw Tite Hitch 36292 Fit a 2005 Monte Carlo SS
  • Yes, the Draw Tite hitch part # 36292 that you referenced is a confirmed fit for your 2005 Chevy Monte Carlo SS with a supercharged 3.6 liter. I attached an install video for you to check out as well. The ball mount you would need is the part # 36061 and then for a hitch ball part # 19258 for a 2 inch ball or part # 19257 for a 1-7/8 inch ball. For wiring you then would want the part # 119178KIT which is a confirmed fit.
    view full answer...

  • Roof Rack Option for Carrying Cargo with a 2004 Monte Carlo SS with High Sports Appearance Package
  • Based on the picture you submitted it looks like you have the High Sports appearance package on your 2004 Chevy Monte Carlo SS. Because of that we do not offer a hitch that would be confirmed to fit. If you are looking to carry some cargo with your vehicle you could install a roof rack and a roof cargo box. For a roof rack you could get the SportRack Semi Custom Roof Rack part # SR1002 and then get a Thule Sidekick Cargo Box part # TH682.
    view full answer...

  • Hitch Recommendation for 2004 Chevy Monte Carlo
  • The correct hitch for your 2004 Chevy Monte Carlo would be the part # 36292 that you referenced. I attached an install video for you to check out as well.
    view full answer...

  • Replacement Hardware for Trailer Hitch Receiver on a 2002 Chevrolet Monte Carlo
  • We have two trailer hitch receivers, Curt # C12028 and Draw-Tite # 36292, to fit the 2002 Chevrolet Monte Carlo however, neither are designed for the SS model because of the rear fascia. The replacement hardware for either hitch is # RHK. To order the exact hardware you'll need to enter the hitch's part number and manufacturer.
    view full answer...

  • Available Class II Trailer Hitch for 2006 Chevrolet Monte Carlo SS 5.3L V8 with Dual Exhaust
  • As long as your 2006 Chevrolet Monte Carlo 5.3L V8 is not the High Sport edition you can use the 1-1/4-inch Class II hitch # 36292. This hitch costs less than the other option from Curt and it offers a no-drill installation using the included hardware kit. The written instructions, which are linked for you, detail the process and list all tools required. A video is also provided to help you get prepared for your installation. This shows installation on a dual exhaust version. In case...
    view full answer...






  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? Read our Returns Policy. Please note that we cannot exchange items. You can also cancel unshipped items. Contact our Customer Service team at 800-298-8924 to find out more about how to cancel your order.

Info for this part was:


Video Edited:
Andrew K

Written by:
Lindsey S

Expert Research:
Jameson C

Expert Research:
Adam R

Updated by:
Laura H

Photos by:
Jim W

Photos by:
Zach O

Updated by:
Amanda M

Updated by:
Jenny M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.