FITS 2010 Dodge Ram Pickup
TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"

Item # TLD1102

lowest price pledge

Retail:$836.02

Our Price: $648.99

You Save: $187.03
Trailer Hitch
Confirmed to Fit
2010 Dodge Ram Pickup

2500 and 3500 - with factory hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 110 lbs

Quantity: 
In Stock, Ships Today
TLD1102 - Visible Cross Tube TorkLift Trailer Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Videos


  • TorkLift
  • Class V
  • 2 Inch Hitch
  • 1700 lbs TW
  • 17000 lbs GTW
  • Visible Cross Tube
  • 20000 lbs WD GTW
  • Custom Fit Hitch
  • 2000 lbs WD TW
Call etrailer.com at 800-298-8924 for expert service. We are your Dodge trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of TorkLift products for your Dodge Ram Pickup 2010. TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" part TLD1102 from TorkLift can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.


  • All Info
  • Reviews (10)
  • Q & A (16)
  • Videos (1)
  • Photos
  • Why etrailer?

2010 Dodge Ram Pickup - TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"

Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.


Features:

  • Heavy-duty hitch lets you tow hefty loads, even when using a hitch extension (sold separately)
    • Specially designed to maintain high capacity when used with TorkLift accessories
  • Dual, vertically stacked receivers let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time
    • Single-receiver cross tube installs under your OEM hitch to provide 2 receivers
    • Compatible with industry-standard ball mounts and hitch accessories
  • Truck-camper-friendly TorkLift design
    • Pre-drilled to accept TorkLift camper tie-downs (sold separately)
    • SuperTruss extension (sold separately) extends hitch receiver out to clear your bed-mounted camper
  • Sturdy steel construction with high-penetration, dual-shield welding ensures strength and durability
  • Hardened, reinforced hitch pin holes prevent elongation from wear
  • Bolt-on installation - no welding required
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish resists corrosion
  • Safety chain loops are built in
  • 2 Hitch pins and clips included - hitch locks sold separately
  • Custom fit for your vehicle
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 17,000 lbs
      • Maximum GTW when used with weight distribution: 20,000 lbs
    • Maximum tongue weight: 1,700 lbs
      • Maximum TW when used with weight distribution: 2,000 lbs
  • Cross tube dimensions: 3-1/2" x 3-1/2"
  • Lifetime warranty


With the 2 receivers that you get with the SuperHitch, you can tow a trailer and carry a hitch-mounted bike rack or cargo carrier at the same time. And if you have a truck bed camper, this hitch has pre-drilled mounting points for TorkLift's super-sturdy camper tie-towns (sold separately). You can also add one of TorkLift's SuperTruss hitch extensions (sold separately) to extend the top receiver of the SuperHitch so that it clears your camper, allowing you to tow your trailer while your camper's installed.


Truck Bed Camper Compatibility

TorkLift is known for their truck camper tie-down systems and other camper accessories, so it just makes sense that they would have camper enthusiasts in mind when designing a trailer hitch. Each SuperHitch is built with integrated mounting points for TorkLift camper tie-downs, making it easier than ever to get a quality tie-down system for your slide-in camper.


TorkLift SuperTruss in SuperHitch

The dual-receiver design of the SuperHitch also makes it easy to tow with your truck bed camper in place. The SuperTruss line of high-capacity hitch extenders is specially designed to extend the hitch receiver back far enough to clear your bed-mounted camper, while still allowing for an excellent towing capacity. An ordinary hitch extender can dramatically reduce your towing capacity. But each SuperTruss extension forms such a solid connection with the SuperHitch that the setup is able to maintain one of the highest weight capacities in the industry. When used with a standard weight distribution system, the setup can maintain up to a 10,000-lb weight limit, even with an extension that is 60" long. As a result, you can clear almost any truck bed camper and still do some heavy-duty towing.


Dual Receivers for Maximum Versatility

With the SuperHitch from TorkLift, you can tow your trailer and use a hitch-mounted bike rack or cargo carrier at the same time. This is thanks to the dual-receiver design of the SuperHitch.


Most trailer hitches have a single receiver. Typically, you can find an adapter or extension piece that will slide into your hitch to give you 2 receivers, but these adapters dramatically reduce both your towing capacity and your tongue weight, limiting how much you can tow, as well as how much you can carry with a bike rack or cargo carrier. This SuperHitch, which mounts beneath your factory hitch receiver to provide the dual receivers, is specially constructed to maintain a high weight capacity so that you can use the 2 receivers without sacrificing towing or carrying ability.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff is available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.



D1102 Tork Lift Original Super Hitch 1 Receiver for OEM Hitch



Weight Carrying Capacity
Gross Towing Weight (GTW):
17,000 lbs.

Tongue Weight (TW):
1,700 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.

Tongue Weight (TW):
2,000 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

On Short Bed models with 17" tires, the spare tire will stow away about 2" lower after hitch installation, but will not present any clearance issues. No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation , Hitch will only work on models whose factory hitch has been Factory Welded On , Modification of the spare tire hanger is required on Short Bed models




Video of TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for TorkLift Trailer Hitch - Custom Fit Hitch - TLD1102 Review

Today we're going to review part number TLD1102. This is the TorkLift SuperHitch Class V Original Trailer Hitch Receiver. This is hitch receiver is a custom fit design. It is designed to fit the 2003 to 2012 Dodge/Ram 2500 and 3500 HD Series in either the long or the short bed and it is designed for the Rams with the factory installed hitch. The way this hitch is designed is it's made to work with the factory installed hitch to get you the dual hitch design. This is specially designed heavy duty hitch, which will allow you to maintain your high capacities when used with the TorkLift accessories like the TorkLift hitch extension or the weight distribution system, which we do sell separately. Again, when you mount this on to your Dodge/Ram it will bolt up, this part right here will bolt upright under your factory hitch, so your factory hitch will be right above this one so it will give you the dual, vertically stacked hitch receivers that will let you tow a trailer and use a hitch-mounted bike rack or cargo carrier at the same time. The hitch receiver is compatible with industry-standard ball mounts and hitch accessories.

Another nice feature on this hitch it is a truck-camper-friendly design and the reason that is is if you put a camper on your truck bed and by chance it happens to extend over the back of the bed and your hitch is sort of hidden underneath, you can add a TorkLift SuperTruss extension, which we also sell separately. That will allow you to install in here and extend your hitch receiver out to clear the bed-mounted camper. Those extensions come in the range of 21" to 60". The nice thing about those SuperTruss extensions is when they're installed properly and hooked up properly. They will not reduce any of your weight capacities like some of your hitch extensions do.

They will maintain the full weight capacity. This hitch is a sturdy steel construction with a high-penetration, dual-shield welding, which will ensure strength and durability. Another nice feature is right around the hitch pin holes on each side here. It's hard to see with this plate on top but it is reinforced and hardened around the hitch pin hole and the reason they do that is when you install the hitch pin through there, on both sides being hardened and reinforced it will protect it from elongating that hole, because lots of times when you'd be towing is the movement of the shank in the hitch receiver will move back and forth and overtime would elongate those hitch pin holes. They took that into consideration and they ended up putting the reinforcement around the hitch pin holes. It's a very nice feature. This is a bolt-on installation.

As you can see for demonstration here I do have the end plates bolted on that are used to mount to your Dodge/Ram. One of the nice features on that is I want to show you on this . the bolts, there's 4 bolts on each side that attach the end plates to this cross tube. I just want to show you the bolts they use. If you look real closely they actually have a spline shoulder; a little bit thicker shoulder with splines on it.

The reason they do that and they are all grade 8 bolts; when you go in you just tap that in to get it started, then when you put your nut on to torque it down, as you torque it down it will pull this bolt and those splines into that end plate and the cross member and it secures the bolt to those pieces, so it doesn't rotate or have the chance of rotating in there. It's a very nice feature they put on there. This does have a nice black powder coat finish that will help resist corrosion. You can see right down here it has the holes in it; these are the safety chain loops. They're built-in that way you can attach your safety chains to. It does come with the 2 Hitch pins and the clips. It comes with the mounting hardware, the instructions, everything you need to install it onto your Dodge/Ram. This is custom fit for your vehicle. It is made in the USA. The receiver opening on this is 2". I'm just going to put a measurement on there to give you an idea; 2". Again this has a rating of a Class V and what that means is as far as capacities, the maximum gross trailer weight capacity is 15,000 lbs; maximum tongue weight capacity is 1,500 lbs. If you do us it with weight distribution it will increase to the gross trailer weight of 17,000 lbs and the tongue weight of 1,700 lbs. The dimensions on this cross tube is going to be 3-1/2" square, this way and that way. It does come with a lifetime warranty. That should do it for the review on part number TLD1102, the TorkLift SuperHitch Class V Original Trailer Hitch Receiver. .


Customer Reviews

TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2" - TLD1102

Average Customer Rating:  4.3 out of 5 stars   (10 Customer Reviews)

Tow a trailer and use a hitch-mounted carrier at the same time with this heavy-duty hitch that works with your factory hitch to give you 2 stacked receivers. The SuperHitch is pre-drilled for camper tie-downs and works with SuperTruss extensions.

- TLD1102
by:
2011 Ram 3500

Parts showed up faster tha expected,and in good condition.Thankfully I had help for the install,this is one heavy unit. All in all I am very pleased with with this hitch. All so the how to install videos were very helpful. 364788



- TLD1102
by:

Solid product and pretty easy to install. I did have a Hellwig Big Wig anti-sway bar and Torklift camper tie-downs installed, so the end link brackets and tie-downs had to come off and attach to the new hitch brackets. The new brackets and hardware make you able to install the end links back into place, but it is not the best as it pushes the link to the side and there isn't really a washer to put back against the bushing in the kit. I installed it by myself in my driveway in about 3 hours total with removing old brackets. If there was anything I'd knock on this kit was the packaging, which leads to breaking out of the box during shipping. The bottom of the box was worn all the way through and the powdercoating was knocked off of the ends of the hitch plates, so not really happy about that part. Other things in the box are double packaged, so at least another layer of cardboard or 2 would probably cure this issue. Not etrailer's fault obviously. 225075


Comments

Hitch is still working great, no issues with camper, towing, etc. Would use the same product again without question.

Josh S - 09/10/2016

20892

- TLD1102
by:

The only problem we had with installing the product was the unclear possibly inaccurate instructions describing the bolt length to use. Other wise went in fairly easily. 639198



- TLD1102
by:

Very stout product. Thanks etrailer for prompt shipping. Needed to grind the excess rear backside of the OEM factory receiver tube a bit...normal factory variability. I run a Hellwig sway bar; didn’t like the links running off one side of a bolt, so welded in 5/16" 90-degree brackets to get a double shear, like the Hellwig mounts. 616569



- TLD1102
by:
2010 Ram 3500

Made to last. 496138



- TLD1102
by:

I cannot place an actual review on this product as I never installed it. In talking to the installers here, they informed me that I would have to 'beef up the truck frame ' as the forces applied by the extension kit would be more than my truck was designed for. The cost was prohibitive. The item is still in the shipping box in storage, along with the extension kit. I didn't attempt to return it because the error was mine. If I had done the proper research, I would not have bought it. It was a very expensive error on my part. 435906



- TLD1102
by:

Hitch came today and unpacked. Very heavy duty unit! Let you know later how easy the installation is. lol Good ship time. 413970



- TLD1102
by:

Heavy duty well built. I do wish they would include a instructional DVD. 389551



- TLD1102
by:

Great to work with the Etrailer family. shipped early, easy to install. Excellent quality. 329766



- TLD1102
by:

As always fast shipping and helpful people on the phone 169127


10
10

Ask the Experts about this TorkLift Trailer Hitch

Do you have a question about this Trailer Hitch?


  • Trailer Hitch for a 2003 Dodge Ram 2500 with Factory Hitch and Hellwig Big Wig Sway Bar
  • Based on your picture the linkage from the frame to the sway bar would be in the way for Curt trailer hitch # C15409. But not to worry because there is a hitch that accounts for a Hellwig sway bar for a 2003 Dodge Ram 2500 with factory hitch. It is the TorkLift SuperHitch Magnum # TLD1102-30 and it is a beast. It has a 2-1/2 inch receiver and is rated for an astonishing 20,000 pounds gross trailer weight (30K when used with Everest weight distribution). I have linked the instructions in...
    view full answer...

  • Recommended Trailer Hitch and Extension for 2008 Ram 3500 Dually with Dual Receivers
  • The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" # C15409 is designed to fit below the factory hitch receiver on your 2008 Ram 3500 dually. The top of the Curt receiver will be 8-1/2 inches from the bottom of the frame where it attaches. I confirmed this with my tech contact at Curt and have also attached a video to assist. Use of a custom extender is required for this combination. The torque of a long extension will drastically impact the trailer hitch receiver. A...
    view full answer...

  • Recommended Towing Trailer Hitch Extender For 2017 Ram 3500 Short Bed With Truck Bed Camper
  • If you have a 2-1/2 inch hitch receiver on your 2017 Ram 3500, I recommend the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long # C45048. This would be limited to 4,500 lbs without weight distribution or 6000 lbs with weight distribution. If you don't have a factory receiver, then you will need the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15803 to use that extension.
    view full answer...

  • Recommended TorkLift SuperHitch for a 2010 Dodge Ram 3500
  • I do have an option for you but the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1100 will not fit your 2010 Dodge Ram 3500. This hitch is only designed to fit a Dodge Ram 3500 from 1994-2002. Instead, I recommend using the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1101 if you do not have a factory hitch or part # TLD1102 if you do have a factory hitch. If you also need the TorkLift SuperTruss and then you can use one of the following depending on...
    view full answer...

  • Recommendation for Towing a Trailer with a Hitch Extension
  • The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15809 is a great option for your 2011 Ram 2500 as long as you are okay with a 24 inch hitch extension like # C45048. This will give you a gross trailer weight of 8,000 lbs when used with weight distribution, so a weight distribution system would be required. Your other option is to use the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLD1102 instead...
    view full answer...

  • Camper Tie Downs Compatible With TorkLift SuperHitch on 2011 Dodge Ram 3500
  • We have tie-downs that are compatible with the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - 2"# TLD1102 that fits your 2011 Dodge Ram 3500, though Rear Tie-Downs # TLD3109 are not. The tie-downs compatible with the TorkLift SuperHitch Original Trailer Hitch # TLD1102 on a 2011 Ram 3500 dually are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2120 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3505. Additionally, since...
    view full answer...

  • Does Curt Hitch C15809 Fit w/Same Torklift Rear Camper Tie-Downs as Factory Hitch on 2003 Ram 3500
  • For your 2003 Dodge Ram 3500 long bed dually with the factory installed trailer hitch you are likely using rear camper tie-downs # TLD3109. If you switch to a non-Torklift aftermarket trailer hitch you would need to use # TLR3500 for the rear tie-downs. This will be the case for any non-Torklift aftermarket hitch. If you did go with a Torklift aftermarket hitch such as # TLD1102 or # TLD1102-30 then you would still need different rear tie-downs, # TLR3503.
    view full answer...

  • Can the TorkLift SuperTruss Extension be Used on a 2010 Dodge Ram 2500 with Factory Trailer Hitch
  • The SuperTruss extension # TLE1548 is designed to work with TorkLift SuperHitch trailer hitches only. You can add one to your 2010 Dodge Ram 2500 using # TLD1102. Then you would be able to use the extension. With this set up the extension will have a tongue weight capacity of 600 pounds. How much extension do you need? If you do not need 48 inches then there could be some other options that would not require the addition of a SuperHitch.
    view full answer...

  • Spare Tire Optional Modification for Installing Torklift Hitch on Short Bed 2012 Ram 3500HD
  • For the short bed models of the 2012 Ram 3500HD if you have a 17 inch diameter spare tire it will get stowed about 2 inches lower after the installation is complete. This lower storage height has been tested and does not present any ground, exhaust or differential clearance issues. In the event that the original spare tire stowage position is preferred, the spare tire locator loop can be removed. Simply remove the loop by cutting on the marks shown below. Apply a good quality rust...
    view full answer...

  • Will TorkLift fit on 2012 Dodge Ram 3500 With Factory Hitch?
  • There will be no drilling required to install the TorkLift SuperHitch # TLD1102 on your 2012 Dodge Ram 3500, and you will not have to remove your bumper or the factory hitch; the SuperHitch installs under your OEM hitch. Keep in mind the TorkLift will only work with your Ram 3500 if your factory hitch came welded on. The TorkLift SuperHitch # TLD1102 is Class V rated, with a maximum towing capacity of 17,000 lbs and maximum tongue weight capacity of 1,700 lbs. I've added a link to a...
    view full answer...

  • Will TorkLift Hitch Work With Factory Hitch and Frame Mounted Camper Tie Downs?
  • With a factory hitch on your 2012 Ram 2500 or 3500 series truck, the TorkLift SuperHitch Original Trailer Hitch Receiver - Custom Fit - Class V - Dual 2" Receivers # TLD1102 is compatible to give you 2 hitches that can use a SuperTruss extension like # TLE1536. This hitch will work with frame mounted camper tie downs.
    view full answer...

  • Replacing the Factory Hitch on a 2004 Dodge Ram 2500 with a TorkLift Hitch
  • You may not be able to remove the factory hitch on your 2004 Dodge Ram 2500. Check to see if it is welded on or bolted on. If it is welded on then you would need to use a hitch that keeps the factory hitch in place such as # TLD1102. The receiver angling downward could mean that it will need some persuading in order for the new hitch to fit. If it bolts on then make sure that the mounting locations are not compromised and go with # TLD1101 after removing the old hitch.
    view full answer...

  • Recommended Extension for 2000 Dodge 2500 with Camper to Use Weight Distribution System on Trailer
  • To use a weight distribution system like the Strait-Line Weight Distribution System w Sway Control # RP66083 along with a truck bed camper, you will need a compatible trailer hitch receiver and an extension rated for weight distribution. If you have a 2-1/2 inch hitch receiver on your 2000 Dodge 2500, then you can use the Reese Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long # RP45018 or the Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34"...
    view full answer...

  • Will a Curt Trailer Hitch Fit with TorkLift Tie-Downs on a 2006 Dodge Ram 3500
  • I spoke with my contact at TorkLift who said that if you have the rear Tie-Downs # TLR3500 then you could potentially use the tie-downs if the aftermarket trailer hitch has room for the 4" x 4" footprint on the side plate for the tie-down. Since the Curt Trailer Hitch # C15809 has this space you can use it if you have those rear tie-downs. If you have the factory hitch on your 2006 Dodge Ram 3500 and you are using other TorkLift camper tie-downs then you need to use the TorkLift SuperHitch...
    view full answer...

  • How To Use a 3 Foot Long Hitch Extender On a 2008 Dodge Ram 2500 While Towing
  • I do have an option for you but in order to carry that much weight on a hitch extender you will have to use a dual receiver tube setup. The most cost effective option we have for this is the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1102 as this will then allow you to use the TorkLift SuperTruss Hitch Extension part # TLE1536 which is the only extender available that will allow you to carry this much weight. The TorkLift Wiring Harness Extension part # TLW6036 will also...
    view full answer...

  • What Is the Correct TorkLift SuperHitch for a 2012 Ram 3500 with Factory 2 Inch Hitch
  • The correct TorkLift SuperHitch Original Trailer Hitch Receiver for your 2012 Ram 3500 is part # TLD1102. I am not sure where you are seeing that you need a 2-1/2" opening on top and then a 2" opening on bottom but all of the TorkLift SuperTruss Hitch Extensions like part # TLE1536 require a 2" opening on top and bottom so that is not correct. I have attached the different lengths offered for you as well.
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos Edited:
Jackie C
Written by:
Lindsey S
Expert Research:
Michael H
Photos by:
Jim W
Expert Research:
Jeffrey L
Updated by:
Sarah W
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.