FITS 2010 Dodge Ram Pickup
Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"

Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"

Item # 41947

lowest price pledge

Retail:$366.43

Our Price: $192.26

You Save: $174.17
Trailer Hitch
Confirmed to Fit
2010 Dodge Ram Pickup

Cab and Chassis

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 77 lbs

Quantity: 
In Stock, Ships Today
41947 - Class V Draw-Tite Trailer Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images


  • Draw-Tite
  • Class V
  • 2 Inch Hitch
  • 1600 lbs TW
  • 15000 lbs GTW
  • Visible Cross Tube
  • 16000 lbs WD GTW
  • Custom Fit Hitch
  • 1600 lbs WD TW
Call etrailer.com at 800-298-8924 for expert service. We are your Dodge trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Draw-Tite products for your Dodge Ram Pickup 2010. Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" part 41947 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.


  • All Info
  • Reviews (21)
  • Q & A (50)
  • Photos
  • Why etrailer?

2010 Dodge Ram Pickup - Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2"

Perfect for marine and heavy-duty applications, this Dodge Ram Pickup trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.


Features:

  • Custom fit is designed specifically for your vehicle
  • Steel construction with computer-aided design ensures strength and durability
    • Heavy-duty side brackets welded on
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class V
    • Maximum gross trailer weight: 15,000 lbs
      • Maximum GTW when used with weight distribution: 16,000 lbs
    • Maximum tongue weight: 1,600 lbs
      • Maximum TW when used with weight distribution: 1,600 lbs
  • Limited lifetime warranty

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41947 Draw-Tite Class V Ultra Frame Trailer Hitch Receiver



41947 Installation InstructionsInstallation Details 41947 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
15,000 lbs.

Tongue Weight (TW):
1,600 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.

Tongue Weight (TW):
1,600 lbs.



Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Product fits vehicles with frame that is 34" wide outside to outside




California residents: click here



Customer Reviews

Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" - 41947

Average Customer Rating:  4.4 out of 5 stars   (21 Customer Reviews)

Perfect for marine and heavy-duty applications, this vehicle trailer hitch receiver is strong, durable and corrosion resistant. Tested Tough guarantee ensures that the hitch exceeds industry standards.

- 41947
by:

Excellant heavy product. It took a little fitting to the frame, only because this went on a military truck. Finished project is neat and will haul well 12623


Comments

did you install this hitch on a m1008 cucv? if so did you need to cut one set of bumper brackets? trying to find a hitch that I dont have to hack up the stock cucv bumper brackets to install

-- comment by: joe - 12/02/2012

551

I sent an email to the author to see if he has anything to add.

-- Patrick B - 12/4/2012


- 41947
by:

Thanks for great product. It will work great perfect fit. 554732



- 41947
by:
Ford F-350 Super Duty

The hitch works great, but was not a simple install. None of the holes on the rails matched the frame on my chassis cab F350. I had to trim and make mods to this hitch to make it fit. Not what I expected at all. I am a metal fabricator by trade, so no big deal to me, but others wouldn't have the ability to install this hitch on the same truck as mine. The fit description needs to be reviewed and revised. 573988


Comments

Per the installation instructions, drilling is required to install this hitch on a 2011 Ford F350 Cab/Chassis, so the mounting holes in the hitch wont necessarily match up with existing holes in the trucks frame.

-- Mike L - 10/13/2018

44577

- 41947
by:
1987 Chevrolet C/K Series Pickup

Hitch came to me in good condition and looks very well built. However, I purchased this for a 1987 Chevrolet dually and it is not a fit for my truck. The first issue I found is with the spare tire. The side brackets are so deep there is no way to get around them to relocate the spare, they simply hang down too far. The hitch is at a good height in the uppermost holes. I attempted to install anyway only to find the center holes directly under a crossmember that would not allow space for a bolt to drop in. Overall looks to be a quality product for whatever its intended purpose just not workable on my square body dually. An expensive paperweight. 445420



- 41947
by:

I received the hitch as promised. I have not tried the installation as of today but I have no reason to say anything bad or good concerning the product. So should any more opinions be needed, send another request a week from today and I will answer and I will answer at that time. 553808



- 41947
by:
1986 GMC C/K Series Pickup

This receiver is well made and was not too bad to install. It should be noted that it is more of a "universal" hitch in that it fits multiple vehicles. This does require drilling holes in your truck's frame, which is not a difficult job, but it's not a direct bolt-on hitch. I had to make provisions for my true dual exhaust which added some time to the install, but overall it took about 3 hours to remove my rear bumper, the old class III hitch, and install this one. I use my 1986 GMC C3500 to tow my 24' enclosed car hauler. 423121



- 41947
by:

So far so good I truck pull and this is a strong hitch would by another and recommend 682041



- 41947
by:

I don't want to discourage anyone from buying this hitch. That said, I probably shouldn't go into great detail, as to how I use it. I replaced a class III hitch on my motorhome, to carry a 700 pound motorcycle on a carrier. It it designed to fit 36 inch frames, but simply reversing the brackets, it now fits a 42 inch motorhome frame. Nuff said. It does the job very well. 650176



- 41947
by:

Fast service, shipping and delivered,. Thanks 646798



- 41947
by:
2018 Ford F-350 Super Duty

The hitch is doing every thing I need it to do. The one problem that I had with it was. I was told it would fit a F-350 2018. With the mounting we had to drop the fuel tank, to get at the rear bolts. Also we had to add a 1/4" plate to both ends of the hitch, evidently the 2017 frame is a half inch narrower then the 2018 model. Once we did that everything went together with out any problems. 621719



- 41947
by:
2013 Ram 3500

Does fit my 97 3500 GMC cab and chassis with the second fuel tank, as promised. Unfortunately, it DOES NOT fit with my second fuel tank armor plate, which had to be removed for installation. I will do some cutting and hopefully be able to bolt it back up with 4 of the 6 bolts, which will be better than nothing. This is a better hitch for a truck that is lifted a bit higher than mine, as I used the top-most holes for the cross member, and the side fins hang down a clownish amount. Hopefully it will not be a problem in my frequent off road uses. Unloaded, the fins are 13 1/2 inches off the ground. A very beefy and solid thing, this should tow whatever I need it to, and in the end, function over form. Maybe I will work on a custom rear bumper that will help to hide it some. 619177



- 41947
by:

Hitch fit very well and it installed very easy, will definitely buy another one from here when I need another. Thanks very much 611274



- 41947
by:

Great price and products. I would recommend them. 610899



- 41947
by:
1986 Chevrolet C/K Series Pickup

Instructions say you need a 9/16 drill bit to drill the holes for the hitch. In all reality you need 11/16 inch to drill the holes in the frame to mount the hitch. I actually used a 3/4 drill bit to complete the install. 585886



- 41947
by:

Took some cutting, hitch sits closer to the truck. Shawn was very up to speed on the product and good to work with. I will need to modify my exhaust pipes. 566933



- 41947
by:
2018 Ford F-350 Cab and Chassis

Great service,good hitch 491926



- 41947
by:
1987 GMC C/K Series Pickup

Very heavy duty. Hardware kit was missing due to UPS. Called customer service and they shipped out a new hardware package right away. Great products and great customer service. 489574



- 41947
by:
Chevrolet Silverado 2500

Great quality arrived fast, drilled 6 holes in the frame and bolted it place excellent fitment good instructions will outlast most trucks it's put on twice as thick as the frame of my 2500 Chevy 421755



- 41947
by:
1969 Chevrolet C/K Series Pickup

This hitch is being used on a custom 1969 Chevy C50 pickup truck. I won't be using this truck to haul, it's only for show. It was easy to install, and it looks perfect on the frame. You can't have a truck this big without a big hitch on it. 343562



- 41947
by:
1984 Chevrolet C/K Series Pickup

Great receiver, very strong and easy to install. Thanks for your quick shipping and great price. 256711



- 41947
by:

Trailer hitch is great service was five star service thank you e trailer 120398


21
21

Ask the Experts about this Draw-Tite Trailer Hitch

Do you have a question about this Trailer Hitch?


  • Trailer Hitch Options for a 1989 GMC Sierra 3500 with 37 Inch Wide Frame Spacing
  • Your generation of GMC truck (1989 3500) had an interesting model. The crew cab models of that era were built on the same chassis as the cab and chassis (models turned into service trucks) which have the more narrow 34 inch frame. So any hitch that states it is for Crew Cab models or 34 inch frames will not fit. Hitches that do NOT fit the Crew Cab models include: Draw-Tite # 37130 Draw-Tite # 40050 Draw-Tite # 41901 Draw-Tite # 75099 Draw-Tite # 75033 Draw-Tite # DT45506 Draw-Tite...
    view full answer...

  • Recommended Trailer Hitch, Gooseneck Hitch, and Sway Control for 2007 Ram 3500 Flatbed Chassis
  • For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41936 rated for 1,200 lbs tongue weight or 12,000 lbs towing. If you need a stronger receiver or one that can use weight distribution, I recommend the Draw Tite Class V # 41947 rated for 15,000 lbs towing without weight distribution or 16,000 lbs towing with...
    view full answer...

  • Trailer Hitch Solution for 2017 Ford F-350 with 34 inch Frame
  • 34 inch wide trailer frame indicates you have a cab and chassis F-350, which we do have solutions for that. But if you have an RV built on a F-350 frame then we don't have a fit that I can guarantee will fit since the rears of those are quite a bit different in dimensions than most vehicles and vary from motorhome to motorhome. The # 41947 will fit a 2017 F-350 Cab and Chassis and it is a Class IV hitch though. If your Ford isn't a motorhome this would be a great option. The other...
    view full answer...

  • Will Draw Tite Hitch part # 41947 Fit 2018 Ford F-550 Cab and Chassis Frame
  • Your 2018 motorhome on a F-550 chassis has cab and chassis frame dimensions like what the Draw Tite hitch part # 41947 is designed to fit so this hitch would fit and work well.
    view full answer...

  • Trailer Hitch Recommendation for a 2016 Chevrolet Silverado 3500 HD Truck
  • I can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer hitches below that will fit your vehicle, but the Reese RP45302 is not one of them. I also included a link on this page to take you directly to the page of the 5 hitches that will fit your vehicle for your convenience. 2 inch receiver...
    view full answer...

  • Trailer Hitch Recommendation for a 1987 Chevy C/K 1500 With a Deep Drop Bumper
  • A deep drop bumper is a bumper that hangs further below the frame than a standard bumper. Check out the photo that I attached showing a deep drop bumper compared to a standard bumper and a step bumper. We have three frame mount trailer hitches that will work with a deep drop bumper on your 1987 Chevrolet C/K 1500. You could install the Curt Hitch, # C13099 or the Draw-Tite Hitch, # 41504. These are all Class III trailer hitches that have a towing capacity of 5,000 lbs and a tongue weight...
    view full answer...

  • Hitch to Fit Older Vehicle with 34 inch Wide Frame
  • Since you have a 34 inch wide frame we may have something that could work with a bit of fabrication on your part. 34 inch wide frames (measured from outside to outside) is a very common frame width for cab and chassis trucks. Check out the part # 41947. This hitch fits a 34 inch wide frame and has several height adjustments on the crosstube to allow to match what your vehicle would need.
    view full answer...

  • Trailer Hitch that Clears Frame Rivets for a 2015 Ford Cab and Chassis Truck
  • Pictures can sometimes be deceiving. The holes in the side brackets for the hitches that fit cab and chassis models of the 2015 Ford F-350 are not actually in a straight line. They are off-center from each other. This is shown well on Draw-Tite hitch # 41947. I have included a more top-down picture of it so you can see what I mean.
    view full answer...

  • 2005 Ford F150 Trailer Hitch Recommendation
  • For your 2005 Ford F-150 the Curt Hitch part # 13357 has been confirmed to fit your vehicle and is our most popular option so I would recommend it for you. It has been confirmed to fit all models of your vehicle so it would work with your frame setup. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...

  • Trailer Hitch Recommendation with High Capacity for 1976 Chevy K20 Truck
  • The highest capacity hitch we have for your 1976 Chevy K20 is the Draw Tite part # 41947 which has a capacity of 16,000 lbs and 1,600 lbs tongue weight. The tongue weight capacity of a hitch is the vertical load capacity the hitch has. So basically the amount of weight a coupler that can put on the hitch before failure.
    view full answer...

  • Recommended Trailer Hitch for 2006 Ford F-450 Cab and Chassis
  • The hitch I would recommend is a heavy duty hitch option from Draw-Tite part # 41947, which is a Class V hitch rated up to 16,000 lbs towing capacity. Check out the links to all of the trailer hitches that are compatible with your vehicle as well as the installation instructions. This hitch is often used with a forged ball mount like the one included in ball mount kit # EBMK2416, which has a 3 inch rise or a 4 inch drop. This kit includes and pin and clip as well as both 2 inch and 2-5/16...
    view full answer...

  • Install Instructions for Draw-Tite Ultra Frame Hitch 41947 on 2017 GMC Sierra 3500 Cab-and-Chassis
  • The 2017 GMC Sierra 3500 cab-and-chassis is a confirmed fit for the Draw-Tite Ultra Frame Trailer Hitch # 41947 so long as the truck frame width dimension is 34-inches from outside edge to outside edge. This frame dimension requirement applies to all hitches we offer for this vehicle, all shown on the linked page. Also linked are the instructions for this hitch which include specifics for your truck on page 5. I took that specific page and linked it for you. The red arrows point out...
    view full answer...

  • Dimensions for Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947
  • I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket is 30-1/2 inches. The distance between the mounting holes, center to center, is 3-1/2 inches for the closer of the two holes and 15-7/8 inches from the hole nearest the receiver to the rear bracket hole. If you need any additional...
    view full answer...

  • Dimensions of Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947
  • I have attached an image of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 referenced in your question with a few dimensions labeled. The distance between mounting holes, from the left side mounting bracket to the right side mounting bracket is 30-1/2 inches. The distance between the mounting holes, center to center, is 3-1/2 inches for the closer of the two holes and 15-7/8 inches from the hole nearest the receiver to the rear bracket hole.
    view full answer...

  • Installing Draw-Tite Ultra Frame Trailer Hitch Receiver, Class V on 1978 Chevrolet Pickup
  • To install the Draw-Tite Ultra Frame Trailer Hitch Receiver, Class V # 41947 on your 1978 Chevrolet Pickup with 8 foot bed you will want to position the brackets so that they miss frame and suspension components, such as the rivet you mentioned. This hitch is not designed to use any kind of rivet on your vehicle for installation. For installation you will need to drill 3 holes in the frame on each side to feed the bolts through the frame and the hitch. I've attached the installation...
    view full answer...

  • Highest Capacity Trailer Hitch for a 1986 Chevy K30 Cab and Chassis Truck
  • For a cab and chassis style 1986 Chevy K30 the highest capacity hitch would be # 41947 that you have referenced from Draw-Tite. Because the truck now has an 8 foot bed on it and another hitch, I cannot guarantee that it will fit. You will need to take a look at the instructions I have linked to determine if the attachment points required are free. If you can use the hitch I recommend the etrailer ball mount # EBMK2416. It comes with a ball mount, 2 balls, a hitch pin with clip, and...
    view full answer...

  • Trailer Hitch Recommendation for a 1992 GMC 3500
  • Draw-Tite trailer hitch # 41947 fits the cab and chassis models of the 1992 GMC 3500 trucks. These are the trucks that do not come with beds and are turned into utility trucks, ambulance vehicles, and similar things like that. These trucks have a narrower frame width than the pickup models. If your truck's frame width is 34 inches wide measured from the outside of one frame rail to the outside of the other then this hitch will fit. If you have a regular pickup model with a standard/step...
    view full answer...

  • Trailer Hitch Recommendation for a 2011 GMC Sierra 3500 Cab and Chassis
  • I checked with Draw-Tite and they do list Trailer Hitch # 41947, as a fit for the Cab and Chassis model 2011 GMC Sierra 3500. The truck will need to have a 34 inch wide frame for this hitch, or any of the hitches listed for your vehicle, to fit (measured from outside to outside). I have included a link to the installation instructions for you. I have also included a link to all of the hitches listed as a fit for your truck. For a ball mount, I recommend the etrailer ball mount kit,...
    view full answer...

  • Will Spare Tire Stay in Place Using Draw-Tite Trailer Hitch 41947 on a 1986 Chevy K30
  • We have not had anyone complain about not being able to keep the spare tire on when installing Draw-Tite trailer hitch # 41947 and it is also not specified in the instructions, linked for reference. So if your 1986 Chevy K30 has a stock spare size and not a larger aftermarket size then it will stay in place under the truck. I also recommend ball mount kit # EBMK2416 which includes a ball mount with a 3 inch rise or 4 inch drop, 2 balls, a hitch pin and clip, and a storage bag. For...
    view full answer...

  • Availability of the Draw-Tite Trailer Hitch Receiver # 41947 For a 2005 Chevy Kodiak C5500 Chassis
  • Yes we do, it can be found listed as part # 41947 on our site and is confirmed by Draw-Tite to fit your 2005 Chevrolet Kodiak C5500 Chassis with a Motorhome on it.
    view full answer...

  • Trailer Hitch for a 1998 R-Vision Trail Lite
  • Your best option is the Curt RV hitch # 13703. It fits frame widths from 22 to 72 inches. It fits box, C-Channel, and I-Beam frames. And it can be bolted or welded on (welding should be done by a professional welder). Because of its versatility this hitch is going to be your best option.
    view full answer...

  • Flat Towing With 2010 Ford E450
  • I am going to need a bit more information in order to make a good recommendation. Is your 2010 Ford E450 a Cab and Chassis style or an RV cut-away. I spoke with my contact at Cequent, and they said that what you would have to do to determine if a hitch would fit is to measure the frame. If you have a 34 inch wide frame then I recommend a hitch like the Draw-Tite Trailer Hitch, part # 41947. This hitch has a 2 inch receiver opening and has a gross trailer weight capacity of 15,000 lbs. This...
    view full answer...

  • Trailer Hitch for a 1996 Chevy K1500 with Roll Pan Bumper Installed
  • What you will want to do is look at the hitches available for the 1996 Chevy K1500 with 10 inch deep drop bumper. These hitches come down lower and could work for you. Curt hitch # C15317 has the highest capacity of the options at 2,400 pounds tongue weight capacity and 16,000 pounds gross trailer weight capacity. But it measures 7-1/4 inches from the bottom of the frame to the top of the receiver. Check your truck to see if your could get away with 7-1/4 inches. If it will not work...
    view full answer...

  • Fit & Compatibility of Trailer Hitch for 1996 Ford F-450 Superduty Cab and Chassis w/34 Inch Frame
  • Regardless of the trailer hitch you will most likely need to drill some holes. In addition to the # 41947 you were looking at, my contact at Curt and he told me that the Curt Hitch part # C15445 would work for your 1996 Ford F450 Cab and Chassis Super Duty. This model will not require you to bolt the wings to the hitch, they have already been welded on. The advantage to the adjustable Draw-Tite hitch is it allows for better bumper clearance. I have linked both above mentioned products...
    view full answer...

  • Will the Draw-Tite Ultra Frame Trailer Hitch Receiver for 1968 Chevy C10 Sit Below License Plate?
  • The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41947 is a confirmed fit for your 1968 Chevy C10 with standard bumper. This is an easy installation but will require drilling and the receiver will be below your license plate not behind it. .
    view full answer...

  • Recommended Trailer Hitch Receiver for 2007 Kenworth T300
  • Since you have a 34 inch wide frame, we may have something that could work with a bit of fabrication on your part. 34 inch wide frames (measured from outside to outside) is a very common frame width for cab and chassis trucks, so we do have options for those beyond the universal RV style hitches. I recommend looking at part # 41947. This hitch fits a 34 inch wide frame and has several height adjustments on the brackets so the receiver can be adjusted to a few different heights. I've...
    view full answer...

  • Hitch Recommendation for a 1999 Chevy 3500 on a Cab and Chassis Frame
  • The Draw Tite hitch part # 41947 has been confirmed as a fit for your 1999 Chevy 3500 that is built on a cab and chassis frame that is 34 inches apart. It has the cutout in the mounting flange to clear the spring hanger like you said you needed as well.
    view full answer...

  • Recommended Trailer Hitch Receiver for 1975 GMC C25 Sierra Grande
  • Since the Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41938 isn't a fit for your 1975 GMC C25 because of the spacing, the best bet is to look another hitch. The Draw-Tite Ultra Frame Class V # 41947 is a confirmed fit and also has a 2 inch hitch receiver opening. It also has a maximum GTW of 15,000 pounds. Another option is the B&W Heavy-Duty Class V # BWHDRH25122 which has a GTW of 16,000 pounds. I've attached an install video of this hitch on a 1986 Chevy just to give...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.