1. Trailer Hitch
  2. Dodge
  3. Ram Pickup
  4. 2010
  5. Draw-Tite
FITS 2010 Dodge Ram Pickup
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # 41929
lowest price pledge
Our Price: $217.16
You Save: $63.37
Trailer Hitch
Confirmed to Fit
2010 Dodge Ram Pickup

2500 and 3500 - with factory hitch

2500 and 3500 - without factory hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 70 lbs
In Stock
Draw-Tite Custom Fit Hitch - 41929
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Call etrailer.com at 800-298-8924 for expert service. We are your Dodge trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Draw-Tite products for your Dodge Ram Pickup 2010. Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part 41929 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (15)
  • Q & A (34)
  • Photos
  • Why etrailer?

2010 Dodge Ram Pickup - Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

  • Draw-Tite
  • Class IV
  • 2 Inch Hitch
  • 12000
  • Concealed Cross Tube
  • 15000 lbs WD GTW
  • 1200
  • Custom Fit Hitch
  • 1500 lbs WD TW

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant Dodge Ram Pickup trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 15,000 lbs
    • Maximum tongue weight: 1,200 lbs
      • Maximum TW when used with weight distribution: 1,500 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41929 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame

81533 Hidden Hitch Class 4 Trailer Hitch Receiver

Installation Details 41929 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
15,000 lbs.

Tongue Weight (TW):
1,500 lbs.

Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation

California residents: click here

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41929

Average Customer Rating:  4.6 out of 5 stars   (15 Customer Reviews)

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

- 41929

Put on my 05 dodge power wagon for piece of mind for a long trip from ohio to wyoming pulling 26 foot travel trailer. Checked bolts a few times. Everything seem good. Help putting it would be a plus! 643587

- 41929
2005 Dodge Ram Pickup

On time and right product. 550828

- 41929
2007 Dodge Ram Pickup

Great hitch. The only thing that I had an issue was installing the rear most bolts, right at the read bumper mounts, once I loosened those bolts the hitch lined up just fine. Be for warmed the rear bumper can drop down. We feel much better towing our travel trailer now. The truck looks good with it there, other than having two 2" receiver tubes there. One of the best upgrades we done. 337708

- 41929

This was easy to install! I will feel alot better when pulling my camper with this hitch! Great product! 422045

- 41929
2003 Dodge Ram Pickup

Excellent customer service by Troy H. at etrailer. Installed hitch on 2003 dodge ram 1500 SLT crew cab, 4.7L V8, bed size was 78". Instructions stated no drilling required for my truck, however, I had to drill 4 holes. It wasn't difficult, but, was challenging because I didn't have any help to install. UPS also damaged hitch during delivery, but, I had to move forward with the install. 549273

Hitch is working perfectly and am very satisfied with the purchase from etrailer.
Hiten - 08/04/2019


- 41929

Received product as ordered easy to install glad I purchased 733811

- 41929

The hitch worked well (5 stars) the packaging was poor so a lot of the paint was knocked off of the edges, so I had to buy paint to touch it up. etrailer offered to send a touch-up kit but I needed to install it the next day. 728823

- 41929

excellent product, installation was easy. If there were more fish wires added to kit it would have made it easier. 728689

- 41929

This is heavy duty. It has worked for everything I need it for. Install was pretty easy and instructions were straight forward. The only complaint is that after being installed I noticed the receiver was welded a little at an angle which puts the ball a little of center. Not noticeable when towing but aesthetically annoying if your looking at it. 642403

- 41929

I have had this hitch for a year now. I have pulled campers, car trailers and dump trailers as much as 10,000 lbs with no issues. It was easy to install only took about an hour. I am very happy with this purchase. 614368

- 41929
2007 Dodge Ram Pickup

I have always purchased towing and accessories from etrailer. This is the third truck I have put a hitch on. The product was great however the quality assurance of the packaging was lacking as I was given the incorrect nuts. Two of the four nuts were fine threaded instead of national coarse. This led to an issue mid-way through my install. The nuts only costed$ 2.00, but the time it consumed to retrieve them was frustrating . 491536

- 41929
2007 Dodge Ram Pickup

Great customer service, Great product, Quick delivery, Good reference videos available. Only issue was video shows NO drilling required.... use existing holes in frame! 07 Dodge Ram has to have holes drilled in frame!!! NO biggie, just sayin!!! 453683

Lloyd W - 11/20/2018


- 41929

Very durable hitch at a very good price, very fast shipping too 452573

- 41929
2008 Dodge Ram Pickup

Product excellent and built very well and it fit perfect under my factory hitch on my 2008 dodge ram the only reason it only got 4 stars cause it was a little tricky getting the bolts in the truck frame to mount the hitch and it took a little time but there probably is no cure for that problem just a little patience. 371454

- 41929

got what i ordered quickly. everything fit. good instructions.draw tite makes a nice product. 39219


Ask the Experts about this Draw-Tite Trailer Hitch

  • Fit and Compatibility of Trailer Hitch for 2007 Ram 2500 with Factory Hitch Installed
    Thanks for your pictures, this helped me identify that your hitch is a factory hitch on you 2007 Ram 2500. I can tell because of the design and the way the hitch is mounted to the cross-frame with a weld. I have linked all the hitches that will fit this factory hitch for you to check out. You will have both 2 inch and 2-1/2 inch receiver options. Which you would like will depend on your trailer setup. A great hitch if you wanted a 2 inch receiver would be the Draw-Tite # 41929. If...
    view full answer...
  • Does Draw-Tite Trailer Hitch Fit 2011 Ram 3500 Dually
    I verified with Draw-Tite that yes, the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929 is a fit for your 2011 Ram 3500 dually. The hitch will bolt onto the frame of your Ram without any interference. I have added a link to the installation instructions for you as well which I recommend checking out of the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929.
    view full answer...
  • Recommended Trailer Hitch for a 2005 Dodge Ram 1500
    According to the owner's manual for your 2005 Dodge Ram 1500, if you will be towing more than 5,000 lbs but not more than 12,000 lbs then you will need to use a class IV trailer hitch with a 2" receiver tube opening. For this, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41929 which has a maximum gross trailer weight rating of 12,000 lbs. The Draw-Tite Ultra Frame Trailer Hitch Receiver is a custom fit for your Ram and it has a lifetime warranty. It also comes...
    view full answer...
  • Does OEM Bumper Beam/Hitch Receiver Need to be Removed for Draw-Tite Hitch on 2008 Dodge Ram 1500
    Great news! The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41929 actually sits below the OEM receiver on your 2008 Dodge Ram 1500 so you don't have to remove anything for this installation! I have attached a clip from the installation instructions that gives an example of this.
    view full answer...
  • Trailer Hitch Recommendation for a 2004 Dodge Ram 2500 with Factory Trailer Hitch
    The factory hitch on the 2004 Dodge Ram is welded to the bumper beam on the truck. The bumper beam is a round, curved piece of steel. In order to remove the factory hitch it would have to be torched off and you would not want to cut off any of the bumper beam. The heat from cutting off the hitch could still affect the bumper beam so it is not advisable to remove the factory hitch. I recommend going with a hitch that is designed to fit beneath the factory hitch, like # 41929 that you...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2010 Ram 3500 With Ranch Hand Legend Bumper
    The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41929 will sit 9 inches from the bottom of the vehicle frame rails to the top of the receiver tube. This will work well with the ranch hand bumper you have and won't make the drop seem so drastic. If you go with a hitch that is not for the OEM hitch receiver installed, you can use the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 14361 which measures 6-1/2 inches from the frame to the top of...
    view full answer...
  • Recommended Heavy Duty Trailer Hitch Receiver for 2003 Dodge Ram 1500
    The Curt Trailer Hitch Receiver - Custom Fit - Class V - 2" # C15572 is not a fit for your 2003 Ram 1500. It is only a fit for 2009 and newer models. For your needs, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" # 41929 which is rated for 12K towing and 15K when using weight distribution and tongues weights at 1,200 or 1,500 with weight distribution. This is a very strong hitch that will meet your needs and not be an issue when using the Fastway...
    view full answer...
  • How to Use the TorkLift SuperTruss on a 2006 Dodge Ram 3500
    In order to use the TorkLift SuperTruss Hitch Extension part # TLE1548 on your 2006 Dodge Ram 3500 you will need to remove the factory hitch and install the TorkLift SuperHitch Original Trailer Hitch Receiver part # TLD1101. There are no other options to use any of the TorkLift SuperTruss Hitch Extensions on your Dodge Ram 3500. The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41929 would most likely not work with the factory trailer hitch and even if it were to the receiver tube...
    view full answer...
  • Trailer Hitch Recommendations for a 2004 Dodge Ram 2500 with Factory Trailer Hitch
    The factory trailer hitch on a 2004 Dodge Ram 2500 is not welded to the bumper but it is welded to a support beam that attaches the 2 frame rails so you would not be able to remove it. That is why I recommend a hitch designed to fit models that have the factory trailer hitch. Check out Curt trailer hitch # C15409. This is a beast rated for 2,550 pounds tongue weight and 17,000 pounds gross trailer weight but still with a 2 inch receiver. I have linked a video showing installation for...
    view full answer...
  • Weight Distribution System Recommendation for 2008 Dodge Ram 1500 Bighorn
    If you have a Class IV hitch on your 2008 Dodge Ram 1500 it would be rated for use with a weight distribution system. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your...
    view full answer...
  • Do Curt and Draw Tite Hitches for 2007 Dodge Ram 2500 Hang at Same Height
    The crosstube of the Curt hitch part # C15409 does hang a bit lower but where the hitch opening is will be about the same as the Draw Tite # 41929. Reason being the hitch opening attaches to the bottom of the tube on this hitch. So in reality the hitch will hang about the same height as they are both designed to fit right under the factory hitch.
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2008 Dodge Ram 1500 SLT 4x4
    Your 2008 Dodge Ram 1500 does not have to have the factory tow package to install a trailer hitch. Draw-Tite trailer hitch # 41929 was designed for 1500 Ram trucks that did not come with a factory trailer hitch (among other versions) so you're good to go. If you plan on doing some towing I recommend an adjustable ball mount such as # MT70380. This will allow you to tow trailers of different heights without needing more than one ball mount. And for trailer wiring you can use # 119178KIT...
    view full answer...
  • Is Drilling Required to Install Draw-Tite Trailer Hitch 41929 on a 2011 Dodge Ram 2500
    I checked with Draw-Tite and they do indicate that drilling is required to install trailer hitch # 41929 on a 2011 Ram 2500. Curt hitch # C15409 does not require drilling according to the installation instructions that I have linked for you. I know that your previously asked about weight distribution and this hitch is compatible with weight distribution systems that fit in 2 inch trailer hitches.
    view full answer...
  • Difference In Draw-Tite Class IV Hitch Compared To Lower Priced Class IV Hitch
    When comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part # 41929, to the Curt Trailer Hitch Receiver - Class IV, part # 14361, they are similar, but the new version of the Draw-Tite # 41929 is rated higher. The Draw-Tite Class IV Hitch has a tongue weight capacity of 1,200 pounds and towing capacity of 12,000 pounds. The Curt Class IV Hitch has a tongue weight capacity of 1,000 pounds, and towing capacity of 10,000 pounds. Both part # 41929, and part # 14361 have...
    view full answer...
  • How Much Can a 2005 Dodge Ram 1500 with the 5.7L V8 Tow
    In order to find out if your vehicle is equipped to pull a certain trailer you will need to find the towing capacity of your vehicle and make sure the weight of the trailer does not exceed this figure. Now, there are several different towing capacities for a 2005 Dodge Ram 1500 with the 5.7L V8 that can range from 4,690 lbs to 9,150 lbs. If you can provide me with your cab style, transmission type, axle ratio, and gross combined weight rating (GCWR) then I could give you an exact capacity....
    view full answer...
  • Does Draw Tite Hitch part # 41929 Include Fishwire for Installation
    Yes, fishwire is supplied with the install hardware that comes with the Draw Tite part # 41929 that you referenced. This is confirmed in the install instructions link that I attached.
    view full answer...
  • Availability of Reese Class IV 2 Inch Hitch For 2008 Dodge Ram Quad Cab
    I do have a Reese Class IV 2 inch hitch for your 2008 Dodge Ram Quad Cab, but it will not fit a Mega Cab. You can use It Draw-Tite Class IV 2 Inch Hitch, part # 41929. This hitch has a gross trailer weight capacity of 12,000 lbs, 15,000 lbs with weight distribution, and a maximum tongue weight capacity of 1,200 lbs, 1,500 lbs with weight distribution. If your Ram has an factory hitch this Reese hitch is designed to fit underneath the factory hitch. I am including a link to the installation...
    view full answer...
  • Trailer Hitch that Fits 2017 Ram 3500 without Factory Hitch
    Yes, the Draw Tite hitch part # 41929 that you referenced is a confirmed fit for your 2017 Ram 3500 without a factory hitch and would work well.
    view full answer...
  • What Rear Tie Down Does 2014 Ram 2500 Require if Factory Hitch Gets Replaced with Draw Tite
    Your Torklift tie down part # TLD3109 requires the factory hitch to install. If you replace the hitch with an aftermarket one you'll need a new rear tie down. For that you'd need the # TLR3500 for your 2014 Ram 2500.
    view full answer...
  • Installation Difficulty of Curt Trailer Hitch 15409 for 2006 Dodge Ram 2500 With Factory Hitch
    You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" # C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the hitch, it will bolt on underneath your current trailer hitch, as you can see by the cut out of the linked installation instructions I added for you as well as a photo and review a customer sent in. The Curt is a Class V hitch, and to answer your...
    view full answer...
  • How Much Does Hitch Extender Reduce Tongue Weight Capacity
    The answer is actually pretty simple, because using any type of hitch adapter, including a hitch extender, reduces the capacity of your trailer hitch by 50 percent, and that includes both the towing capacity and the tongue weight capacity. I am not certain what the tongue weight capacity of the hitch on your 2006 Dodge Ram 2500 is, but using the Curt Hitch Extender for 2" Trailer Hitches - 14" Long # C45795 or the Curt Hitch Extender for 2" Receivers -18" Long # C45796 will reduce that...
    view full answer...
  • TorkLift Hitch and Camper Tie Downs for 2018 Ram 3500 Crew with Factory Hitch/Running Boards
    For a 2018 Ram 3500 Crew Cab with factory hitch and 8-foot bed we do have hitch fits that are shown on the linked page. These include both 2-inch hitches like Draw-Tite # 41929 which fits with a standard factory bumper and 2-1/2-inch hitches like TorkLift # TLD1108-30. This is pre-drilled for TorkLift camper tie downs. The fit of camper tie-downs depends on several factors including your hitch. TorkLift offers both steel and aluminum camper tie downs for the Ram 3500 Crew Cab 8-foot...
    view full answer...
  • Which Hitch Sits Lower on 2011 Dodge Ram 2500 With OEM Hitch, Curt # C15409 or DrawTite # 41929
    Both the Curt # C15409 and DrawTite # 41929 hitch receivers are designed to work alongside the OEM hitch. Both sit beneath it when installed. My contacts at DrawTite and Curt were able to provide a measurement that will be helpful to you in determining the location of the hitches once installed. The distance from the bottom of the vehicle frame rails (which is where the hitches attach) to the top of the receiver tube is 9 inches for both products. Both the Curt and DrawTite hitches...
    view full answer...
  • Recommended Class IV Hitch for Towing 7500 lb Camper Trailer with 2004 Ram 1500
    The Curt Class IV Hitch you referenced, part # 14361 would be the correct hitch for the 2004 Ram 1500 unless it already has the factory hitch, or it is a Hemi Sport Quad Cab, a Rumble Bee or an SRT-10 model. If your truck already has the factory hitch, you will need to go with the Draw-Tite Class IV, part # 41929. This hitch is designed to install so that the receiver sits below the factory receiver. Like the Curt model you referenced, it will not fit the Hemi Sport Quad Cab, the Rumble...
    view full answer...
  • Ball Mount Options for a 2014 Ram 2500 With OEM Class V Trailer Hitch
    Most of the domestic truck manufacturers are putting Class V trailer hitches with a 2-1/2 inch receiver on their 3/4 ton trucks, including Dodge. This is mainly because they are building their trucks stronger and stronger each year and they need to install the equipment that can handle the higher capacities. You have a few different options when it comes to ball mounts and hitch balls. If you want to use your current equipment, you could use a reducer sleeve like part # 58102. This...
    view full answer...
  • Trailer Hitch Recommendation for a 2004 Dodge Ram Pickup with a Lower Bumper Trim Piece
    The Curt Class III Trailer Hitch, # 13333, is designed to bolt to the round bumper support bar just behind the bumper. Once installed, the receiver of the hitch will sit directly below the step in your rear bumper. If the lower trim piece covers the underside of the rear bumper and the round bumper support (which appears to be the case according to your photo), then you could install the hitch, but you would need to cut the bumper trim piece for the hitch to fit. If you do not want...
    view full answer...
  • Class IV Hitch Recommendation for a 2011 Dodge Ram Bighorn
    If the factory bumper hitch you are referring to has a ball installed in the step bumper and you do not have a receiver hitch that hangs below your bumper and your 2011 Dodge Bighorn Ram truck is a 1500 then you would want to use the Curt Trailer Hitch for the Dodge Ram, part # 14374, that you referenced. However, if you do have a factory receiver hitch that hangs below your bumper you will not be able to install the # 14374. If this is the case you should consult your owners manual...
    view full answer...

Do you have a question about this Trailer Hitch?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Written by:
Lindsey S
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.