bing tracking image
  1. Trailer Hitch
  2. Dodge
  3. Grand Caravan
  4. 2015
  5. CURT
FITS 2015 Dodge Grand Caravan
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
CURT

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Part Number: 13364
In Stock
ChristmasTree SantaHat Arrives before Christmas SantaHat ChristmasTree
$202.03
Retail:$260.95
You Save: $58.92
Trailer Hitch
Confirmed to Fit
2015 Dodge Grand Caravan

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
Trailer Hitch 13364 - Concealed Cross Tube - CURT
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

The best technical support and full trailer hitch installation instructions. Great price Grand Caravan trailer hitch and expert service. Dodge Grand Caravan, 2015 trailer hitch by CURT are available from etrailer.com. For expert service call 1-800-940-8924 to order your Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13364, or order online at etrailer.com.
  • All Info
  • Reviews (807)
  • Q & A (0)
  • Photos

2015 Dodge Grand Caravan - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

  • 2 Inch Hitch
  • Class III
  • 4000
  • Concealed Cross Tube
  • 400
  • CURT
  • 5000 lbs WD GTW
  • 500 lbs WD TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your Dodge Grand Caravan's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Uses existing hardware from your vehicle
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty



Curt 13364 Installation Diagram

Tech Tip: Some minor fascia trimming may be required around the receiver on 2014 Chrysler Town & Country and 2008-2014 Dodge Caravan and Grand Caravan applications.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13364 Curt Class 3 Trailer Hitch Receiver

Installation Details 13364 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.

Tongue Weight (TW):
400 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.

Tongue Weight (TW):
500 lbs.



No drilling required Manufacturer Estimated Installation Time

Tech Tip

No drilling required for installation , Exhaust must be temporarily lowered for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary , We recommend that all non-trailer loads (bike racks, cargo carriers, etc) should be supported by stabilizing straps, such as 18050, sold separately





Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364

Average Customer Rating:  4.8 out of 5 stars   (807 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Fit great, Install was pretty quick, mounting hardware is already on the van from the factory, when you pull the big bolts out, the plate in the frame is spring loaded and will disappear.
Put the smaller bolts by the bumper in first and snug them but don't tighten them to pull the plate down to get the big bolts threaded in, then tighten them all down.
I didn't trim my bumper like it suggested and it looks fine!



by:
DodgeGrand Caravan

I purchased the wiring and hitch for my Dodge caravan to tow my boat, however I was able to buy a Toyota Highland which will tow my travel trailer and boat trailer. So I sold the Dodge caravan and never installed them. I gave an excellent rating because over the years I’ve purchased various things from e trailer with excellent quality and service. This is a good American company, buy from them,



by:

The hitch looks great. I saw the box it was shipped in and was a little nervous but when I removed it from the box I was pleasantly surprised that it was in perfect condition. Looking forward to installing it Sunday.

Frank profile picture

Frank

6/30/2024

Product is holding very well. Handles everything I ask it too.



by:

Product arrived as promised. I waited a few days to gather tools I needed (namely metric impact sockets) and warmer weather. Installed the hitch last evening. It took about an hour. Most of this time was jacking up, placing jack stands and removing THREE exhaust hanger bolts. I had to remove one about midway before the exhaust would lower enough for me to get to the chassis bolts on the passenger side. Your install video shows a hitch with three passenger side bolts but the actual hitch only has two. Apparently a later version which is exactly what I needed. Actual placement and bolting of hitch and bolting back the exhaust hangers only took about 15 minutes. I am extremely pleased with the neatness and appearance. You see nothing but the receiver box. No ugly cross bars like some hitches show. Thanks for a great product.

Dennis W. profile picture

Dennis W.

1/23/2016

It is perfect.DW



by:
2016 DodgeGrand Caravan

first id like to say thank you to the people of etrailer.com for shipping out my hitch in more than a timely manner. we got the curt 2" hitch for our 2016 dodge caravan. we are using it for a bike rack only and this seems to do the job just fine. I installed it by myself in about 30 minutes. the instructions were pretty simple and easy to follow. if you are looking to get a hitch for your mini van id definitely recommend using etrailer.com.

Jason B. profile picture

Jason B.

3/28/2020

After a year of ownership I couldnt be happier.



by:

Bought Curt Trailer Hitch for my 2019 Grand Caravan.
It fitted as instructed in YouTube video sent in email.

Installed 3 bike hitch carrier on it and drove around with 2 bikes on it.

I will revisit again after 6 months to mention how the Trailer Hitch is holding up.
So far it’s awesome

Jayesh profile picture

Jayesh

7/22/2021

Still holding on and being used weekly. I use mainly for my bike rack. No issues so far and it’s reliable also.



by:

When I received the hitch one end was bent. I called to ask about it and was told that sometimes this happens and it will need to be bent back . I did that myself using a tower jack and a 4x4. The instructions from the install video were very good and helped. The same is true for the wire harness in that the video helped. The hitch is strong and working well after one year.



by:
2016 Chrysler Town and Country

Trailer hitch arrived undamaged and went on in about I hour or less. Fits great and does not show much at all. It will mostly be used for bike rack so it's a little overkill for my needs ,but if I have to tow a trailer it will easily do the job.

John  profile picture

John

6/24/2021

hitch working perfectly



by:
2015 Chrysler Town and Country

Fit perfectly on my Town & Country mini-van. It is mounted up under the rear of the vehicle so it is not seen from the rear. Only visible part is the 2X2 receiver box. The instructions could have shown the two bolt sizes and locations. This would help in getting ready to install.

Chiefhart profile picture

Chiefhart

12/9/2017

Works as designed and installed. great hitch!



by:

Hitch fits great. Videos made installation easy.
I only wish etrailer.com would protect the receiver with some styrofoam for shipping. Mine was a little scratched up right out of the box, which is a bummer because that is the only part visible once installed on my vehicle!

Sierra K. profile picture
Etrailer Expert

Sierra K.

6/10/2021

Thank you for your review. Customer Service takes care of all damage done in shipping. This will need to be covered with anti-corrosive spray paint.



by:

Installed just like the video. My Son, Ben was visiting & he learned about torque wrenches.
Picture of Ben installing hitch

Tom H. profile picture

Tom H.

7/15/2019

Perfect



by:
2012 Chrysler Town and Country

I am a sales Rep in the cycling and outdoor industry and carry bikes and trailers regularly. Bike carriers have increasingly moved from the roof to the hitch mount option over the years and so most of my rack sales need a hitch.

The hitch was surprisingly easy to install and i was able to do it within an hour or so without lifts. It was a little tight getting under the vehicle and turning tools was cumbersome. That said, still easy enough.

I have had no problem with access or clearance with the bumper and have been quite pleased with the hitch. My last trip we visited Big Bend State Park and the road to the HQ is 27 miles of dirt road with an INNO bike rack carrying a fat bike on the rack. I had several bikes on the hitch and never had an issue. I'm around 30k for the past year with something hanging off the back of the car, issue free! Thanks!
N



by:
2014 DodgeGrand Caravan

This is my second time using Etrailer.com for hitching/towing needs and thusly, this is my second hassle-free, perfect, great experience with them.
I was in a pinch and needed a Curt 13364 hitch for a trip to OK that came up quickly. Every other supplier I could find could not give me any kind of shipping time or schedule. I called Etrailer and spoke to Katie D. who took the time and was very courteous and professional with my request. She was able, on a Friday afternoon, to work with me for a proper solution to have the correct hitch shipped to me in DEEP southwest Texas in time for installation before leaving the following Thursday.
Katie D., once the product shipped, kept me updated via email with a tracking schedule that helped me to ensure I would receive it well in time and in good shape, and it did arrive just fine.
Regarding the installation on my 2014 Grand Caravan, pardon the pun but it was installed without a hitch. Taking about 20 minutes to install it went up perfectly with no drilling or cutting of the vehicle body. Utilizing existing bolts in the vehicle, all the holes lined up perfectly.
I cannot say enough good things about etrailer.com and Katie D., they were instrumental in providing what I needed in a timely manner. I would definitely use them again, and recommend them highly!!!!!



by:
Hyundai Accent

This isn't the first aftermarket hitch I've purchased and the first thing that struck me was its heft and rugged construction. I thought "...no way was this thing going to fail or degrade in my lifetime."
I read technical manuals daily and the simplicity and detail of the single-sheet instructions were without error. (a rarity these days).
Besides the obvious top quality of product, what I appreciated the most was the quick and courteous service:
1) purchased online; but verified with a phone call that order was received, in stock, and ETA of shipment - the 1st phone call and person who answered had all my questions answered competently (another rarity).
2) the phone operator was intelligent, was without a heavy accent - easy to communicate with.
3) shipment was tracked and status sent to me via email; follow-up email was sent to me inviting me to place a review.
4) This company is WONDERFUL to deal with; wish I needed more hitches!!



by:

Hello,

I heard of etrailer through
a friend and decided to give it a go. I have not ordered anything from etrailer before, and this being my first time, I thought i would provide some feedback.

Your website was helpful and easy to navigate. For this particular order I decided to call and speak with someone to talk about the 3 options I had for my mini-van, he was very helpful.

I placed the order over the phone and paid extra to have it shipped within a couple days. The order was placed Thursday morning and with an estimated arrive date and time of Saturday, July 17th by 7:PM. I kept with the online tracking though the weekend and into Monday. Finally the UPS tracking updated the website and said it would be delivered Tuesday 20th.

When I received the package, the box was in somewhat rough shape. I figured that it's a metal hitch and that it rough delivery, so I unboxed the hitch to get ready for install. While under the mini-van, my buddy and I lifted the hitch up in place and discovered that the holes are not lining up. We set the hitch down for a closer look and realized that the one side of the hitch is bent. I'm leaving for a trip and needed to have this hitch on before I go, So what we ended up doing was to slowly bend hitch back soa that it lined up with mounting hole.

This was the first time I ever installed a hitch, it was real easy to install and I happy with the finish product. I hoping that there is no long term damage to the hitch from when it was bent in the shipping process and then gently bending it back.

I gave an average rating because etrailer was helpful, but the product delivery could have been more timely and in better condition.



by:

Fits perfect! Followed etrailers youtube video for installation. Used the Curt hitch over the other brands because the receiver tube is longer for better clearance of ball hitch and accessories. See etrailer's hitch camparison video. I'm glad i did because the clearance between the ball and bumper is minimal. I bought an extended and elevated hitch to resolve this issue. Standard free shipping was exceptionally quick!



by:

This is what I installed Review the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13364. Well I got it on. It took more than the 25 min. that was stated, I guess if you have a garage with a lift and all then that time limit would be possible. I did it in my garage with a floor jack, jack stands and a creeper. It took about 2 hours but it is done and it looks great. Everything that was stated in the video was correct except for the time. I did not need to trim the back valance as it just barely touched it.



by:
2010 DodgeGrand Caravan

I picked this Curt hitch over the Draw-Tite hitch because the Curt hitch weighs more which means that it is made with more steel and is a beefier hitch. This Curt hitch bolted up perfectly with all 5 frame bolt holes. I used my floor jack and made a simple wood lifting rig and strapped them together with large cable ties to balance the hitch on the floor jack lifting cup. See my pics. Very happy with this hitch and it installed very nicely! Thanks for the detailed video which really helps!



by:

Ordering was a breeze and I've never seen an online or ship so fast. Installation was just as easy. I did it laying on the garage floor without lifting the vehicle. I also installed the Curt t - connector (part c56150). That took a little more time. With that I added a 4 pin flat/7 blade connector which I mounted to the underbody in front of the hitch. I'm very happy with my purchase and the install and will be a customer for life!



by:

Great hitch, well hidden beneath the rear bumper on my Grand Caravan. I will always buy hitches and accessories on etrailer, as they have extremely good customer service and are very professional. Installation was easy with etrailer's instructional videos and printed directions. Thanks!!



by:
2017 DodgeGrand Caravan

2017 Grand Caravan with Sto-Go, with vehicle on car ramps removed first to bolts for the exhaust and just loosened the third one. Removed frame bolts and used a jack to hold it in place, fits like a glove. It did take my son and I about 2 hours to install hitch and the wiring in the driveway. Highly recommend the hitch....



by:
2017 DodgeGrand Caravan

Just received my new tow hitch and it is falling out of the box. I know it just a tow hitch but it has a nice powder coat on it and its kind off scratched up which will rust sooner. The product seems really nice and if it fits as shown then it will be perfect. You just need to put some dunnage in the box so it doesnt blow out.

Tyler M. profile picture
Etrailer Expert

Tyler M.

3/10/2021

Hi Tim, Thanks for your feedback! I would recommend using some rust resistant and corrosion resistant paint to touch up the areas where the powder coating was damaged. Our customer service team will be reaching out to you about this.



by:
2014 DodgeGrand Caravan

Installed the hitch to our 2014 Grand Caravan SXT in less than 45 min start to finish. Followed the video instructions and did this in my driveway without a jack and just a few wrenches and 13mm socket wrench since i couldn't find my 15mm and 18mm sockets. If you have the right tools im sure this could go even faster and easier. A few bolts were tough to get out but nothing impossible. My wife only helped hold up the hitch into place to get a few bolts in and once they were in place loosely i was able to do the rest by myself. This is my first hitch i have ever installed and im not really a DYI person but this seemed easy enough. Only cost a fraction of what the dealership was going to have us pay to have one installed.



by:
2011 Volkswagen Routan

I have not had a chance to pull a trailer with it yet, but the install was easy.

I installed this hitch receiver along with the trailer wiring harness (P/N 118490) and 4 pole mounting brackets (P/N 18140 & 18144) on my 2011 VW Routan. The total job start to finish took less than an hour and half (that is for the receiver and the wiring). I did the install completely by myself using only basic tools. The receiver was a little awkward to get into place by myself, but it was relatively easily accomplished using a floor jack to support the non exhaust side. The receiver hitch and wiring have a great factory installed look, and will be perfect for pulling my small utility trailer.

All and all, these seem like good products at a very reasonable price!



by:

Looks great easy to install!

Rich profile picture

Rich

7/23/2024

After a years use our curt trailer hitch is still working great! We have used it multiple times hauling furniture, full loads of landscaping mulch, tree branches and tools! We are very pleased with our purchase and the service that etrailer has provided!


25
807
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Fitment of Hitch for 2016 Dodge Grand Caravan
    We have the part you need but, the Curt # C12362 and # 13389 are the proper part numbers for a 2007 Dodge Grand Caravan and these will not fit a 2016 Dodge Grand Caravan. There was a generational change made between these year models. You need the Curt Trailer Hitch Receiver, # 13364 for a 2016 model year Dodge Grand Caravan.
    view full answer...
  • Hatch Clearance With # 63153 Pro Series Cargo Carrier Installed on 2013 Dodge Grand Caravan
    The hitches offered for the 2013 Grand Caravan and Town and Country set back under the rear bumper at a different distance. The Curt # 13364 hitch has a 4 inch distance from the hitch pin hole to the rear most portion of the bumper, while the Draw-Tite is recessed a bit more at about 6-1/2 inches. Based on the distance the carrier is away from the vehicle in the video, the vehicle in the video has the Curt hitch installed on it. This means that when installed on your vehicle with a Draw-Tite...
    view full answer...
  • Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country
    When we installed the Curt hitch # 13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches.
    view full answer...
  • Does Fascia of 2012 Town and Country Need to be Trimmed to Install Curt Trailer Hitch # 13364
    I spoke to my contact at CURT who said some minor trimming of the fascia is required for the hitch installation on your 2012 Town and Country, otherwise the receiver will impinge on the bumper cover. The area that needs to be trimmed is 2-3/4 inch wide by 1/2 inch tall. I have included a diagram of the area that needs to be trimmed as well as a link to installation details. The Draw-Tite # 75579 is a Class III trailer hitch that will not require trimming. I have linked the instructions...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation For 2012 Chrysler Town And Country
    For your 2012 Chrysler Town And Country the hitch I recommend is the Curt Hitch, part # 13364. This is a Class lll hitch with a 2 inch receiver opening. I have attached an installation video for this hitch on a 2012 Town And Country you can check out. We are located in the Midwest but ship throughout the US. If you would like to speak with one of our good folks in Customer Service about shipping you can reach them at 800-298-8924.
    view full answer...
  • Trailer Hitch Receiver With the Highest Ground Clearance for a 2012 Chrysler Town and Country
    We have actually installed both Curt Trailer Hitch Receivers, parts # C12264 and # 13364, as well as both Draw-Tite Trailer Hitch Receivers, parts # 36455 and # 75579, on similar 2012 Chrysler Town and Countrys. Out of all 4 of those choices the Draw-Tite Class II 1-1/4 inch receiver # 36455 offers the most ground clearance at 13 inches. This receiver has a max Gross Trailer Weight of 3,500 lbs and a max Tongue Weight of 300 lbs. If you need wiring for your Town and Country I recommend...
    view full answer...
  • Installation of Curt Class III Trailer Hitch on 2018 Dodge Grand Caravan
    There is possibly trimming required to install the Curt trailer hitch # 13364 on your 2018 Dodge Grand Caravan. If it is it's fairly minimal. Take a look at the diagram I've attached. Your husband is going to need to test fit the hitch on the van to see if the receiver tube clears the bumper fascia. If it does then no trimming is necessary. If the tube doesn't clear the bumper then he'll need to do some trimming. I've linked a video from when we installed the hitch, as well as the install...
    view full answer...
    Image 1 for
  • Recommendation for 2 Inch Trailer Hitch Receiver on 2008 Chrysler Town and Country Stow and Go
    I recommend the Curt Class III Receiver Hitch, # 13364, for your 2008 Chrysler Town and Country Stow and Go. This 2 inch hitch has a maximum trailer weight capacity of 4,000 pounds and tongue weight capacity of 400 pounds and mounts directly to the frame with no welding required. If you plan to tow and need wiring to operate lights on a trailer, the Tekonsha Wiring Harness, # 118552, can be plugged directly into your vehicle's factory connectors with no cutting or splicing needed. We...
    view full answer...
  • Will Adding a Vehicle Suspension System Lift my 2012 Dodge Grand Caravan When Carrying Cargo
    The Timbren suspension # TDVRRT you referenced will help with vehicle sag and it won't change the ride height even when your Caravan is empty, In addition, it will improve your suspension, handling and ride quality, but you still shouldn't exceed your Caravan's weight carrying capacity. Even if you have a Class-III hitch like # 13364, you are still limited to the maximum tongue weight capacity of your Caravan. Based on my research I could find, your Caravan has a tongue weight between...
    view full answer...
  • Recommended Trailer Hitch, Trailer Wiring, And Bike Rack For 2010 Dodge Grand Caravan
    The trailer hitch I recommend for your 2010 Grand Caravan is the Draw-Tite Max-Frame Trailer Hitch, part # 75579. This is a Class lll hitch and it has a 2 inch receiver opening. We also carry the Curt Trailer Hitch, part # 13364. Per Curt, all non-trailer loads such as bike racks, and cargo carriers must be supported by stabilizing straps, like part # 18050, or the warranty is voided by Curt. The Hidden Hitch does not have that requirement and that is the reason I recommend the Hidden...
    view full answer...
  • Recommended Folding Cargo Carrier for a 2016 Dodge Grand Caravan R/T
    I do have an option for you but the 24x60 Curt Cargo Carrier part # C18152 is a fixed carrier that cannot be folded up for storage while not in use. Instead, I recommend using the 24x60 Curt Cargo Carrier part # C18151 which is the folding version of the above carrier. In order to determine if this carrier will work for you, you will need to first confirm that the trailer hitch on your 2016 Dodge Grand Caravan R/T has a 2" receiver tube opening and the distance from the center of the...
    view full answer...
  • Recommended 4-Bike Carrier For 2013 Dodge Grand Caravan
    We do not offer a trunk-mount 4-bike carrier for your 2013 Caravan, but I do have another solution that will work for you. I recommend a trailer hitch and a hitch-mount bike carrier. The trailer hitch I recommend is the Thule Apex XT 4 Bike Rack for 1-1/4" and 2" Hitches # TH9025XT. This is a Class lll hitch and it has a 2 inch receiver opening. You can check out the install video I have attached. When carrying bikes with alternative frames like kids bikes or women's bikes I recommend...
    view full answer...
  • 2015 Dodge Grand Caravan Brake Controller and Wiring Recommendation
    Look like your 2015 Dodge Grand Caravan has a towing capacity of 3,600 lbs so as long as you stay under that capacity with the trailer you tow you'd be fine. If the trailer has a 7-way installed on it with brakes you'd also want to install a brake controller and 7-way in your van. You will need to start with a 4-way (if you do not have one). For that you would want the # C56331. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For...
    view full answer...
  • Are 5 Bolts Enough to Safely Install Curt Trailer Hitch 13364 on a 2014 Chrysler Town and Country
    Apparently, on the 2014 Chrysler Town and Country, on the passenger side frame rail there is a bolt that is holding on the bumper and it should not or cannot be removed. Otherwise there would likely be 6 bolts instead of 5 holding on Curt trailer hitch # 13364. The sheer strength of the bolts, even though there are just 5 of them, is more than enough to handle the horizontal pulling force of towing a trailer. The clamp strength of all of the bolts is more than enough for the tongue weight...
    view full answer...
  • What Trailer Hitch Fits a 2019 Dodge Grand Caravan with Stow-N-Go Seats
    All of our trailer hitches will actually accommodate the Stow-N-Go seats in your 2018 Dodge Grand Caravan! Out of the available options I recommend going with a 2" receiver as it is compatible with more accessories than the 1-1/4" options. All of our 2" receivers mount the exact same way so I recommend installing the etrailer Trailer Hitch # e98854. This has a tongue weight (TW) rating of 400 lbs and a gross towing weight (GTW) rating of 4,000 lbs. when used with a weight distribution...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring Recommendation for 2019 Dodge Grand Caravan
    The trailer hitch I highly recommend for your 2019 Dodge Grand Caravan is the Curt # 13364 because it has a concealed crosstube and is a bolt-on installation that will not require drilling into your vehicle's frame to install. For a wiring harness so you can add a 4-way to your '19 Grand Caravan and power your trailer's lights I recommend the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56331 It is also recommended you use Dielectric Grease for Electrical Connectors...
    view full answer...
  • Is Bumper Trimming Required to Install a Trailer Hitch on a 2016 Chrysler Town and Country
    Based on an installation we did of Curt hitch # 13364 on a 2016 Chrysler Town and Country you will not have to trim the rear fascia to install the hitch. However, it may press up some on the bottom of the fascia directly above the receiver. I have included a link to a video showing installation on a 2016 model for you. When installed the hitch measures approximately 13-1/4 inches for the ground to the top of the receiver opening. If measuring to the bottom of the receiver it would be approximately...
    view full answer...
  • Best Trailer Hitch Receiver for Bumper Clearance on 2013 Chrysler Town and Country
    The receiver with the best clearance is the Curt Trailer Hitch Receiver # 13364 which has a hitch pin hole to rear bumper length of 4". The height to the top of the receiver tube is 12-1/4" The etrailer Trailer Hitch Receiver # e98854 is a close 2nd with a hitch pin hole to rear bumper length of 4-1/2". The height to the top of the receiver tube is 13-1/4" Finally the Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 has a hitch pin hole to rear bumper length of 6-1/4". The height to...
    view full answer...
  • Weight Distribution Hitch for 2019 Dodge Grand Caravan for 480 lbs Tongue Weight
    You can use a weight distribution hitch for your 2019 Dodge Grand Caravan with a 480 lb tongue weight. The hitches for this vehicle all have a maximum 5,000 lbs towing/500 lb tongue weight capacity, like you mentioned: - etrailer Trailer Hitch Receiver # e98854 - Curt Trailer Hitch Receiver # 13364 Though you are close to the capacity, so long as you are under the 500 lb tongue weight it is safe, but you will need a weight distribution hitch. For a 480 lb tongue weight the best value...
    view full answer...
  • Does Trailer Hitch from 2011 Dodge Grand Caravan Fit 2014 Model
    A Draw Tite hitch part # 75579 fits both a 2011 Dodge Grand Caravan and a 2014 Dodge Grand Caravan so the hitch you have now should fit your new van no problem.
    view full answer...
  • Differences Between the Class III Hitches For the 2012 Dodge Grand Caravan
    There are two Class III hitches available for the 2012 Dodge Grand Caravan. The Draw-Tite Class III 2-Inch Hitch, part # 75579, and the Curt Class III 2-Inch Hitch, part # 13364. Both of the hitches use a square tube design and will install in the same location on the vehicle. So they will all look the same on the rear of your Grand Caravan. The difference between the Curt hitch, # 13364, and the Draw-Tite Trailer Hitch, # 75579, is the mounting bracket on the passenger side. The Curt...
    view full answer...
  • Torque Specs for Installation of Curt Class III Trailer Hitch # 13364
    The instructions are confusing, but here's the deal: the 12 mm fasteners have an 18 mm bolt head and the 10 mm fasteners have a 15 mm bolt head. We're not supposed to list the torque specs on our site as they can change without notice and we don't want to have outdated information ever listed so check out the installation instructions to see the torque specs.
    view full answer...
  • Will Roadmaster Rollaway Trailer Hitch Protector Fit my Chrysler Town and Country 2 Inch Hitch
    The Roadmaster Rollaway Trailer Hitch Protector is a universal fit item. It is designed to fit most 2 x 2 inch Class III and up hitches. We carry 2 different 2 inch hitches for your 2009 Chrysler Town and Country. They are Draw-Tite part # 75579 and Curt part # 13364. I got one of the Roadmaster RM-050 from the warehouse and tested on those 2 hitches and it fit both. If you have one of these 2 hitches, it will fit fine. If you do not have one of those hitches, it will probably fit. You...
    view full answer...
  • Weight Distribution Set-Up and Accessories for Towing Pop-Up Camper with 2016 Dodge Grand Caravan
    Let's begin with the receiver hitch. I'd recommend the Curt Class III, part # 13364. This is a concealed hitch; the crossbar will be hidden behind the rear bumper, so it'll look much better than a typical hitch once installed. You'll also need a trailer wiring harness, part # C56331, and a brake controller. For the controller, I'd recommend the easy to install Curt Echo, part # C51180 and the install kit. The Echo simplifies the installation process, you'll just need to run a wire to...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Brent H
Test Fit:
Brent H
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee Conner L
Test Fit:
Conner L
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Victoria B
Expert Research:
Victoria B
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Alan C
Video by:
Alan C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Schuyler H
Video by:
Schuyler H
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924