Curt 3-Piece Trailer Hitch Receiver - Multi Fit - Class V - 2"

Ask the Experts about this Curt Trailer Hitch

• Curt Hitch Bolt Holes Will Not Line Up on 1998 Chevy K3500
  So there's one of two things going on here if your Curt 3-Piece Trailer Hitch Receiver # C15511 isn't lining up properly on your 1998 Chevy K3500 pickup. The first possibility, and the most likely, is that the hitch was slightly bent, or "flexed" during shipping. This is unfortunately common but also relatively easily remedied; I have added a link to a help article entitled "My Trailer Hitch Doesn't Fit" for you to check out which has solutions. The other possibility is that you have...
  view full answer...
• Hitch Solution for 1999 Ford F-250 with Deep Drop Bumper
  The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the # 37133 which has it's hitch opening 7-1/4 inches down below the frame mounting surface. This isn't quite enough though as you'd need 1/8 of an inch more. The # C15316 does drop a bit more than what you'd need but it's going to be best fitting option. Other choice you have would...
  view full answer...
• Recommended 15K Hitch For 1997 Ford F-250 With 34 Frame
  The only option that provides 15,000 gross towing weight capacity is the Curt Class V Receiver Hitch - 1997 Ford F-250 and F-350 Heavy Duty part # C15511 which is designed for the 34" frame but is also a universal fit hitch so there is drilling into the frame required. All of the hitches available for this truck do require some drilling so this is your best option.
  view full answer...
• How Does Curt Hitch C15511 Fit Both 34 & 37-1/2 Inch Frames on 1993 Ford Super Duty
  That's a really good question, and the reason the Curt 3-Piece Trailer Hitch Receiver - Multi Fit # C15511 is able to fit both 34 inch and 37-1/2 inch frames on your 1993 Ford is due to the placement of the side plates. If you take a look of the photo I added you can see it has side plates which do not come attached. To fit this to a 37-1/2 inch frame on your '93 Ford you will attach the side plates with the bolt holes facing outward, and to fit the hitch to a 34 inch frame you will...
  view full answer...
• Possible Hitch fit for 1998 Chevy K3500 Cab and Chassis with Dump Bed
  I really wish we could guarantee a hitch fit but since you have the dump bed and the tank there isn't a way we can verify any of our fits. The Curt # C15511 does fit your 1998 Chevy Cab and Chassis frame and has an 8 inch drop from the hitch tube to the frame attachment point and 6 inches down to crossbeam which would be our best possible option.
  view full answer...
• Curt 3-Piece Hitch Does Not Fit a 2006 Chevrolet Silverado 3500
  The Curt 3-Piece Hitch, part # C15511, is a confirmed fit for only one style of the 2006 Chevrolet Silverado 3500: the Cab and Chassis style. There are two additional styles of the 3500: the Standard Pickup and the Pickup with a 10 Inch Deepdrop Bumper. Unfortunately, if you have either of the Pickups, this hitch will not fit. Whichever you have, you can return the 3-Piece and get the correct hitch for your Silverado. If you have the Standard Pickup, I recommend getting the Curt...
  view full answer...
• Correct Curt Trailer Hitch for 1994 Chevy 3500 Pickup with Cowboy Bumper
  The Curt 3-Piece Trailer Hitch Receiver # C15511 is designed for cab and chassis models of the 1994 Chevy 3500 pickups. From what I could find it looks like your Cowboy Bumper is the 10" deep drop bumper so you'll want the Curt Class V Hitch # C15317 instead. This has bolt holes that are spaced 34-3/8" apart on center so you'd actually be measuring to the center of the mounting locations instead of the outside of your frame. The installation instructions have been linked for you to check out.
  view full answer...
• What is Best Trailer Hitch for 1992 Ford F-150 with Deep Drop Bumper
  For a 1992 Ford F-150 with a deep drop bumper like what you mentioned the best 2 inch hitch we have is the Curt # C15511 which has higher towing capacities than the truck and does allow you to keep the rear mounted spare under it. You should note that any towing setup is only as strong as it's weakest component so what that means is this hitch would not limit you beyond what your truck's towing capacity is but you'd still need to stay under the truck's capacity.
  view full answer...
• Measurement of Curt 3-Piece Trailer Hitch C15511 from End of Mounting Flange to Receiver Tube
  I was able to obtain from Curt a chart showing key dimensions for their 3-Piece Trailer Hitch # C15511 (and other hitch models) that I linked for you. This shows that for hitch # C15511 the overall front-to-back length is just under 24-inches. The height from the top of the mount down to the top of the receiver tube is 8-inches.
  view full answer...
• Compatibility of a Hitch for a 1972 Chevrolet K Series Truck
  The Curt # C15511 hitch is the confirmed fit for a 1972 Chevrolet K Series truck if you have the 8 foot bed and the deep drop rear bumper. The measurement from the top of the tube to the mounting flange is 8-1/32 inches. The extended length was to make sure the hitch would clear the bumper. If you have the standard bumper, then the Curt Hitch # C14082 is the confirmed fit. If # C15511 can be installed on the standard bumper model, then there will be a large gap between the bumper...
  view full answer...
• Trailer Hitch Needed for a 1997 Ford F-350 Heavy Duty with a Deep Drop Bumper
  The Curt 3-Piece Trailer Hitch Receiver # C15511 that you referenced is a great option for the deep drop bumper on your 1997 Ford F-350 Heavy Duty. The Draw-Tite # 41504 is a little more cost-effective but it also requires the use of the adapter kit # 01685 and it doesn't have as high of a weight rating. We do have a selection of camper tie-downs that you can install on your F-350. If you let me know what the size of your truck bed is and if you have a board or step I can make a recommendation...
  view full answer...
• Recommended Trailer Hitch For 1978 Chevrolet C10 Pickup Truck
  We do have trailer hitches that do not require drilling for installation, but they are only designed for a 1978 truck with a deep drop bumper. If you have a deep drop bumper I recommend part # C15511. This is a Class V hitch and it has a 2-inch receiver opening. If you have a standard bumper on your truck, the trailer hitch I recommend is part # C14082. Installation of this hitch does require three holes to be drilled into the frame for each side. If you plan on doing some towing...
  view full answer...
• Recommended Trailer Hitch Receiver for a 1989 Ford F-250
  Due to the weight of your trailer, you are going to want to install a frame mounted trailer hitch on your 1989 Ford F-250. The weight capacity of the trailer is going to far exceed the weight capacity of the bumper as I am sure you have already figured out. They also do not make any sort of kit to strengthen the rear bumper to my knowledge therefore the frame mounted trailer hitch will be your best option. For this, I recommend using the Curt Trailer Hitch Receiver part # C15511. This...
  view full answer...
• Possible Trailer Hitch Fit for 1958 Chevy Apache
  The frame dimensions you listed for your truck are pretty standard for cab and chassis style trucks since you said 34 inches from outside to outside on the frame. While we don't have anything custom fit for your truck we do have hitches like the # C15511 which is designed to fit that frame dimension and is designed to fit below a deep drop bumper so it would easily clear your bumper as well.
  view full answer...
• Hitch Option for 2000 Ford E-450 Ambulance
  I might have a solution for you, but we don't have custom hitches for ambulances. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body (ambulance) truck like yours are multi-fit RV hitches like the # 41990 that has a 16k capacity. This is a weld on hitch that would require either the 7 inch drop brackets part # 4907 or the 16 inch brackets part # 4916. This would be your best option to carry a hitch mounted cargo carrier like...
  view full answer...
• Trailer Hitch Fit and Brake Controller for 1968 GMC 1500 With 8 Foot Bed and Deep Drop Bumper
  We do have a trailer hitch receiver that will bolt onto your 1968 GMC C1500 truck with an 8 foot bed and deep drop bumper. So long as your truck has a frame that is 34" outside to outside the correct fit is the Curt 3-Piece Trailer Hitch Receiver # C15511. If you have a 38" frame you will need the Draw-Tite Trailer Hitch Receiver # 41504. As for the brake controller, you will need a few things, starting with the wiring, and keep in mind this is all going to need to be hardwired in....
  view full answer...
• Trailer Hitch and Wiring for a 2012 Lexus RX 350 and What Other Vehicles Will the Hitch Fit
  I have included a link to the hitches that will fit your 2012 Lexus RX 350. The Curt hitch you referenced, # C15511, will not fit. Hitches are custom designed to fit specific vehicles. Multi-fit hitches are no longer being made. If you went with the Curt hitch for your vehicle, which is # C13143, then it will only fit on the following vehicles: 2010 - 2012 Lexus RX 350 2010 - 2015 Lexus RX 450h 2013 - 2015 Lexus RX 350 And, if you were to move the hitch from one compatible vehicle...
  view full answer...
• Bolt Kit for Attaching Hitch to Chevy C/K Pickup With 8 Bed & Standard Bumper
  To receive replacement hardware your hitch just order etrailer # RHK Trailer Hardware Kit. On the order page you can enter the hitch brand name and model number to get the exact kit that you need. I would not purchase locally as trailer hitch hardware is especially designed for the high stress of towing. If it does not fit you can purchase a new hitch like the Curt # 13028 Class-III with 6000 pounds towing capacity and 600 pounds tongue weight capacity. You could also consider the Curt...
  view full answer...
• Trailer Hitch Receiver Tube Drop on the B&W Hitch Part # BWHDRH25198 and Curt Hitch Part # C15511
  The distance from the top of the mounting flange to the top of the receiver tube on the B&W Heavy-Duty Trailer Hitch Receiver part # BWHDRH25198 is around 7-3/8". The distance from the top of the mounting flange to the top of the receiver tube on the Curt 3-Piece Trailer Hitch Receiver part # C15511 is around 8". I have attached a photo of each measurement for you as well.
  view full answer...
• Hitch fit for 1997 Ford F-250 With Deep Drop Bumper
  The drop of the B & W Class V # BWHDRH25198 is 7-3/8 inches. That represents the distance from the underside of the frame member where the hitch mounts to the top of the receiver tube. If that isn't sufficient to clear your bumper, the Curt Class V # C15511 has an 8 inch drop. The bottom of the receiver tube would be 3 inches lower than that for either hitch. According to the diagram you kindly provided, you need a drop of at least 6-1/2 inches, so either of the two hitches WILL clear...
  view full answer...
• Trailer Hitch Recommendation for 1989 Ford F-250 XLT Lariat with Deep Drop Bumper
  Thank you for the photo! What you have there is a deep drop or "cowboy" bumper. So, for a 2 inch trailer hitch that is confirmed to fit your 1989 Ford F-250 XLT Lariat with the deep drop bumper, I recommend the Curt # C15511. This 3-piece trailer hitch receiver is specially designed for heavy-duty towing. This is a multi fit hitch, so drilling is required to bolt it onto your truck's frame, but it will fit both 34 and 37-1/2 inch frames. It has a 15,000 lb towing capacity and a 1,500...
  view full answer...
• Trailer Hitch for 1998 GMC C/K 3500 Cab/Chassis with Dual Rear Wheels
  We've got you covered. The cab and chassis models did indeed have a 34 inch frame width. I'm not sure what kind of capacity you're needing, but because it's a dump truck on a 1 ton chassis, I'll give you a medium and a heavy duty option. For a heavy duty option with a 15000 lb towing capacity/1500 lb tongue weight capacity, I'd recommend the Curt Class V hitch, part # C15511. If you don't need quite that much grunt, Curt offers the Class IV # C14082 with a 10K towing/1000 lb tongue...
  view full answer...
• Can Spacers be Added to the Curt Hitch for Bumper Clearance on a 1966 Chevrolet C10
  I do have an option for you but I cannot recommend you add any spacers in between the trailer hitch and trailer frame as this would affect the integrity of the trailer hitch. Therefore, if the Curt Trailer Hitch Receiver part # 13028 does not clear the rear bumper on your 1966 Chevrolet C10 then your only other option is to use the Curt 3-Piece Trailer Hitch Receiver part # C15511. The distance from the bottom of the frame to the top of the receiver tube opening is 4-1/2" with part #...
  view full answer...
• Dimensions for Curt Hitches 15300, 15511, 15318, 15319
  I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.
  view full answer...
• Will the Curt Hitch 13028 Fit a 1966 Chevrolet C10 with Aftermarket Bumper
  The Curt Trailer Hitch Receiver part # 13028 could potentially fit your 1966 Chevrolet C10 with aftermarket bumper. However, I would not be able to confirm this as the trailer hitch is only tested with the OEM bumper. I have attached a photo for you with a few measurements that will allow you to see if the receiver tube will clear the bumper. If it does not then please let me know and I will see if we have a better fit for you.
  view full answer...
• Recommended Trailer Hitch Receiver For Deep Drop Bumper On 1990 Ford F250 XLT Lariat
  The B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2" # BWHDRH25198. This is a heavy duty hitch that measures 7-3/8 inches from the frame to the top of the receiver. As long has his deep drop bumper fits with the 7-3/8 inch from frame to top of the receiver measurement, this hitch is confirmed to fit his 1990 Ford F-250 XLT Lariat Diesel. The spare tire may need to be repositioned or modified for this hitch. If you don't want to worry about repositioning the spare,...
  view full answer...