Curt Trailer Hitch Receiver - Multi Fit - Class III - 2"

Curt Trailer Hitch Receiver - Multi Fit - Class III - 2"

Item # C13903

lowest price pledge


Our Price: $222.25

You Save: $78.16
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 80 lbs

In Stock, Ships Today
Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" Class III C13903
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

  • Curt
  • Class III
  • 2 Inch Hitch
  • 8000 lbs GTW
  • Visible Cross Tube
  • 800 lbs TW
  • 12000 lbs WD GTW
  • Custom Fit Hitch
  • 1200 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" part number C13903 can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Q & A (4)
  • Videos (2)
  • Photos
  • Used (1)
  • Why etrailer?

Curt Trailer Hitch - C13903

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Semi-custom hitch is designed to fit several makes and models. Powder coated steel is sturdy and corrosion resistant.


  • Trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Semi-custom hitch is designed for installation on several different makes and models
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Assembled in the USA


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 8,000 lbs
      • Maximum GTW when used with weight distribution: 12,000 lbs
    • Maximum tongue weight: 800 lbs
      • Maximum TW when used with weight distribution: 1,200 lbs
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

13903 Curt Semi-Custom Class 3 Trailer Hitch Receiver

C13903 Installation InstructionsInstallation Details C13903 Installation instructions

This Product Fits The Following Vehicles

2006 - 2019 Ford F-150 without factory hitch

2010 - 2019 Ford F-150 Raptor without factory hitch

Video of Curt Trailer Hitch Receiver - Multi Fit - Class III - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Hitch Installation - 2014 Ford F-150 - Curt

Today on our 2014 Ford F-150, we're going to take a look at and show you how to install the Curt Multi Fit Trailer Hitch Receiver, part number is C13903. Here's what the hitch is going to look like installed on your F-150. This is going to be a hitch that's even with the outer edge of the bumper, so it's not going really going to stick out. Definitely going to see it across the rear of the vehicle here, and the side plates that come down where our crosstube bolts into. Those are going to remain pretty visible. Now, this is a Class III hitch, so it gives us the 2" x 2" receiver tube opening. It's going to make it very, very versatile. It has very high tow weight ratings on it.

The tongue weight rating is going to be 800 pounds, so that's the maximum downward force we could put here at our receiver tube opening. The gross trailer weight rating is going to be 8,000 pounds. That would be the combined weight of your trailer and then anything you we're to load up on it. The hitch is rated for use with weight distribution if you use weight distribution. The tongue weight's going to go up to 1,200 pounds, and the gross trailer weight rating it's going to go up to 12,000 pounds. Now, this hitch comes in three pieces.

It's going to make installation a little bit easier for us if you choose to install it in three pieces. Now, whether you're using a ball mount bike rack or cargo carrier, we're going to have a 5/8 diameter hole here. That's what we'll use to secure our items with. We want to choose Class III rated accessories, and you'll see there's plenty of room around there for whatever type you might want to use, whether it's an anti-rattle bolt, maybe a locking hitch pin, or just a pin and click. The safety chain connection points are going to work out for your smaller style hooks. I wouldn't recommend this hitch if you have the great big clevis hooks.

While they will attach, they're probable going to kind of bind and not hang down naturally. Now, a couple measurements that'll be helpful when it comes time to select your ball mount bike rack or hitch cargo carrier. Will be from the ground to the inside top edge of our receiver tube opening, we've got about 19-1/4". Then, from the center of our hitch pinhole to the outer most edge of our bumper, it's about 3-1/2. It's a great idea to get yourself an extra set of hands. Of course, you're going to loosely attach your side plates on and take one of our 1/2" bolts with the 1/2" washer. That's going to go through, and then when we put it up in place, it's going to be going right through this bumper bracket.

We're going to use the appropriate 9/16 flash washers to get the spacing that we'll need, so we'll slide those on our bolt. We'll bring it right up into the bumper bracket. Just thread on that flange nut to hold it. Do the same thing on both sides. Then, we can move to our rear attachment points, which will be right here. For our rear attachment point, we're going to use the same style bolt and flat washer. That goes through from the outside. Inside, we got our two 9/16 flat washers that takes up that gap in our frame. We have our square hole spacer block and another flange nut. We're going to do that same thing on both sides of the vehicle as well. Now, we're going to rotate the back of the hitch up. We want to make sure that our washers are in that hole like we had before. Just take a look, make sure it's level, and then I like to snug these down first. That's going to draw that plate over. It'll keep our washers in position. Now, we'll run through, snug up our hardware, and then we'll torque it down to the specifications listed in the instructions. Now, we'll head through had get them all torqued down. I like to start with the ones that connect to the frame and then take care of that center section. Once those are tightened down, we can move on to the center section to the brackets. Now, as you'll seek we did remove the spare tire for this installation. It's recommended. It's just going to make it easier to get to stuff and certainly makes it easier for you guys to see. If you've done that, you want to replace that at this point and the hitch is going to be ready for use. That's going to complete our installation of the Curt Multi Fit Trailer Hitch Receiver, part number C13903, on our 2014 Ford F-150.


Ask the Experts about this Curt Trailer Hitch

Do you have a question about this Trailer Hitch?

  • Trailer Hitch Receiver Height and Weight Capacity of Curt Hitch on 2016 Ford F-150
  • The Curt Trailer Hitch Receiver # C13903 is a Class III hitch that is rated up to 8,000 pounds. Or up to 12,000 pounds if you're using a weight distribution system. It is designed to fit your 2016 Ford F-150. The # C13903 sits about 2 inches under the F-150's bumper where the Class IV hitch # C14016 is about 5 inches under the bumper because it will fit with a factory hitch installed.
    view full answer...

  • Bumper Clearance on Curt Trailer HItches for 2018 Ford F-150
  • The Curt Class IV # C14017, Class III # C13118, and Class III # C13903 trailer hitches will all have almost identical bumper and ground clearance dimensions when they are mounted under your 2018 Ford F-150. There will be a distance of around 3-1/4 inches from the center of the hitch pin hole to the outermost edge of the rear bumper. What separates the models from each other are their Class ratings and their physical appearance when installed. Between the three options I recommend going...
    view full answer...

  • Trailer Towing Capacity of 2019 Ford F-150 with 3.5 liter EcoBoost
  • The 2019 Ford F-150 with the 3.5 liter EcoBoost engine has more than enough capacity to tow a 6,300 lb trailer like you have. The 2WD versions look to have a capacity of 11,100 lbs and the 4WD models 9,400 which easily would handle the weight of a 6,300 lb trailer. The Curt hitch you referenced does not fit your truck but we do have the # C14016 which is a Class IV hitch that fits if you do have the factory hitch, or part # C13903 which fits if you do not have the factory hitch.
    view full answer...

  • Front Hitch Recommendation for 2012 Ford F-150 that Allows Tow Hooks to Be Left On
  • For your 2012 Ford F-150 the Curt front hitch you want is actually the part # C31068 as the hitch you mentioned does not fit your vehicle. This hitch does allow you to keep the front hitch and tow hooks.
    view full answer...

Do you have a question about this Trailer Hitch?

Used Items Available

Condition: Missing Parts

Notes: Item is missing all of the hardware. Otherwise new and unused.

Our Price: $123.34

Secure Checkout

  • Why

    At we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Video by:
Joshua S
Video by:
Kathleen M
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Chelsea B
Test Fit:
Randy B
Test Fit:
Brent H
Updated by:
Sarah W
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.