Product Experts Available Now!
Call 800-298-8924
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(38 reviews)
Price: $73.86
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13392
Retail:$140.09
Our Price: $73.86
You Save: 47%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Orders above $99 qualify for Free Shipping
In Stock
- All Info
- Reviews (38)
- Q & A (28)
- Photos
- Why etrailer?
Curt Trailer Hitch - C13392
- Curt
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- No Cross Tube
- 350 lbs TW
- 4000 lbs WD GTW
- Custom Fit Hitch
- 400 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Overall length of receiver tube: 9"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum GTW when used with weight distribution: 4,000 lbs
- Maximum tongue weight: 350 lbs
- Maximum TW when used with weight distribution: 400 lbs
- Maximum gross trailer weight: 3,500 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13392 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2018 Jeep JL Wrangler
- 2018 - 2018 Jeep JL Wrangler Unlimited
- 2019 - 2021 Jeep Wrangler
- 2019 - 2021 Jeep Wrangler Unlimited
- 2018 - 2018 Jeep JK Wrangler with standard factory bumper
- 2018 - 2018 Jeep JK Wrangler Unlimited with standard factory bumper
- 2007 - 2017 Jeep Wrangler with standard factory bumper
- 2007 - 2017 Jeep Wrangler Unlimited with standard factory bumper
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13392
Average Customer Rating: 5.0 out of 5 stars (37 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Powder coated steel is sturdy and corrosion resistant.
- C13392
by: Adam05/24/2018
2018 Jeep JL Wrangler Unlimited
Easy install , love it on my new Jl 512732
- C13392
Mike L - 11/13/2018
45694
by: Ernanie11/12/2018
Hi, I’m trying to install this hitch but when I went under, I saw these two screws (see attached). I’m not sure what it is and if it’s ok to remove, install the hitch and put it back. I have a 2018 JL Rubicon unlimited. Please advise 582143
Comments
I spoke with my representative in the tech services department at Curt Manufacturing and was told that its perfectly acceptable to remove the 2 bolts shown in the photos you provided and substituting them with the bolts provided with the hitch.
-- Mike L - 11/13/201845694
- C13392
by: Dustin05/08/2018
2018 Jeep Wrangler
This fit perfectly and took about 10 minutes on my 2018 Jeep Wrangler Sport S JLU. No need to move muffler. I used a rubber mallet for a couple of taps get it snug like I used so you wont have to use a hammer and dent or scratch it. Would buy this 100x over. Anyone can install this. 505708
- C13392
by: Jeff O.08/14/2018
2018 Jeep Wrangler
This is a Great product! I received it within three days of my order and was able to install it within 20 minutes with just a 3/4" ratchet and a 3/4" wrench. This was installed on a 2018 Jeep Wrangler. All holes matched up perfectly ! Thank you ! 553503
- C13392
by: Ken05/10/2018
2018 Jeep JL Wrangler Unlimited
One side of the hitch would not slide all the way up the bumper beam. Had to use a hammer and some hard strikes to get it all the way up. 506524
- C13392
by: Dave10/23/2020
Super easy to install, well made, the powder coat looks thick and we’ll done. 902891
- C13392
by: Mark10/23/2020
I ordered these items and I no time at all they arrived at my front door! I was able to track the items, time, place, arrival and departures. As far as the quality of the equipment, extremely well made and top notch functionality. Some of the parts were heavy, but well packaged for safety. I highly recommend this company. 904759
- C13392
by: Ryan10/20/2020
Good information, easy transaction. Fast shipping. A+ 904359
- C13392
by: William10/19/2020
Excellent service. Perfect fit. 904163
- C13392
by: Lance10/18/2020
900417
- C13392
by: Brian10/17/2020
899996
- C13392
by: Stephen10/05/2020
2018 Jeep JL Wrangler
Excellent quality throughout -- even supplied w/ grade 8 hardware. Fits perfectly. 10min install. 897439
- C13392
by: Daniel09/23/2020
888477
- C13392
by: Timothy09/02/2020
873024
- C13392
by: Marc08/01/2020
Fit perfectly ... 859424
- C13392
by: Cote,07/08/2020
Great customer service Great product fits perfect. 830151
- C13392
by: Nick06/29/2020
Jeep
Hitch is excellent. Fit perfect on my J eep. 824953
- C13392
by: Bernie06/11/2020
2019 Jeep Wrangler
Arrived quickly and fit perfectly. 812056
- C13392
by: David05/30/2020
Great qualifications, easy install. I have a Jeep JL wrangler Sahara so the outside bolts were already present with the welded on nuts.on a plate behind the cross member. Just lightly pries out the plate, Slipped the hitch between it and the cross member. And threaded the bolts tbrough. Use the original bolts as they are a different thread and head size. Wonderful quality and great finish. No grinding, pounding, or retrofitting needed. Slipped right in. 805388
- C13392
by: Theodore05/28/2020
Curt Hitch arrived very quickly! Ordered in May of 2020. Label shows that it was made in April of 2020. All hardware parts are included. No missing parts. Item is in perfect condition. I would not hesitate to order from etrailer.com again, if this is how they do business. Happy and satisfied. Outstanding. 804632
- C13392
by: Mike05/26/2020
Great prices good product delivered early and in excellent condition.i will buy again if needed 803778
- C13392
by: Andy05/24/2020
Well made, easy install should hold up well. I like the extended length two inch receiver tube. 802957
- C13392
by: Steve05/24/2020
Jeep
Great product, shipped and rcvd quickly. Installed very easy on my new Jeep Unlimited JL Willy. Much heavier duty than old hitch that I had on 2017 Sahara. And great price value.. 802508
- C13392
by: Gregory05/21/2020
Very simple install. Did not have to drop the muffler, you can get the bolts in with it in place (2020 Wrangler). Have to loosen 4 bolts under bumper (2 10mm heads and 2 7mm heads) to push the metal bracket out that holds the two welded on bolts present stock on the Wrangler. Once I did that it slipped easily into place (did need a few whacks with a rubber mallet to line up just right). Hitch itself only takes 15-20 minutes. 801505
- C13392
by: Michael05/19/2020
Easy install. Just followed instruction s. 800202
30
44
Show More Reviews
Ask the Experts about this Curt Trailer Hitch
- Recommended Hitch for 2016 Jeep Wrangler JK Willys EditionI have a solution for you, but the Curt # C13392 will not fit on your 2016 Jeep Wrangler JK Willys Edition with the glossy black center section; it is only designed to fit on the fully plastic factory bumper models. Instead, you'll want to use the Curt # 9883544 which will work on this particular bumper. I've linked a photo of this hitch on a similar bumper to the one found on the Willys Wheeler for you to have a look at. If you're going to be towing with this hitch I recommend using...
view full answer...![]()
- How to Secure Loose Fit for Trailer Hitch AdapterTrailer hitches as well as adapters have some tolerances that means they may not be exact in regards to the opening being 2 inches or an adapter being fully 2 inches such as you may be seeing with the Curt Trailer Hitch Receiver # C13392. So what you are experiencing is not irregular and there isn't a 2" to 1-1/4" adapter that is a full 2 inches, they will all likely be just slightly smaller to accommodate a hitch opening. The only way to counteract a loose fit is to use an anti-rattle...
view full answer... - Trailer Hitch Recommendation for 2017 Jeep Wrangler for Carrying Bike RackThe best hitch we have for carrying a bike rack with your 2017 Jeep Wrangler is the Curt hitch part # C13392 because of all the options we offer it has the longest hitch tube which will allow the bike rack to easily fit past the spare at the rear of the vehicle. Then for a bike rack the Thule Hitching Post Pro part # TH934XTR will fit and work great. We had the chance to test fit this rack on a Wrangler like yours and we found it fit and work well. See review video link.
view full answer...![]()
![]()
![]()
- Does Curt Hitch # C13392 Fit 2020 Jeep Wrangler Rubicon with Steel BumperI checked with Curt and they list their hitch part # C13392 as a fit for all models of the 2020 Jeep Wrangler including your Rubicon that has the steel bumper. You would not need to weld on additional nuts to the hitch.
view full answer... - Hitch, Bike Rack and Bike Rack Mounted Snowboard Carrier for 2019 Jeep Wrangler UnlimitedFor a 2 inch receiver hitch, I'd recommend the Curt # C13392. The hitch uses a longer receiver tube which helps hitch mounted accessories reach past the spare tire. For a bike rack, I'd recommend the Thule Roadway, part # TH912XTR. The rack features sturdy cradles to hold the bikes securely with an anti-sway strap that prevents bikes from swaying back and forth while being transported. An anti-rattle hitch lock is available separately as # THSTL2. When riding season is over, the Thule...
view full answer... - Will Curt Trailer Hitch C13392 Fit a 2018 Wrangler JKWe've confirmed that Curt hitch # C13392 does fit the JK models as well as the JL. I've linked a video of when we installed it on a 2014 JK for you.
view full answer... - Can the Factory Trailer Connector Bracket be Used on a Jeep JL Wrangler Unlimited with Curt HitchI took a look at how the factory trailer connector is installed on a 2018 Jeep JL Wrangler Unlimited and I don't see any reason as to why it cannot still be reused with the Curt Trailer Hitch Receiver part # C13392. The shape of the hitch in regards to where the trailer connector mounting bracket attaches doesn't appear to be much different and they both install in the same set of holes. However, we have not yet had the chance to replace the factory trailer hitch on a 2018 Jeep JL Wrangler...
view full answer... - Recommended Trailer Hitch for 2018 JL Rubicon Unlimited for Bike Rack and Snowboard/Ski RackThe Curt Trailer Hitch Receiver - Class III - 2" # C13392 is a fit for your 2018 Jeep JL Wrangler Unlimited Rubicon. It will work very well for a bike rack and snowboard/skis. If you don't already have the bike rack, I recommend the Thule Hitching Post Pro - Folding Tilting 4 Bike Rack w Anti-Sway # TH934XTR. This rack will give clearance for your spare tire and tilts so you can access your cargo when bikes are unloaded. I recommend the Thule Snug Tite Hitch Lock and Anti-Rattle...
view full answer... - What Size is the Hitch Pin Hole on the Curt C13392 Trailer HitchThe hitch pin hole on the Curt # C13392 has a diameter of 5/8", which is standard for 2" and 2-1/2" receiver hitches, so the Bolt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitch - Codes to Chrysler/Dodge/Jeep Key # BL7018448 will work well for your hitch and will code to your factory key from your 2020 Jeep Wrangler.
view full answer... - Bumper Clearance Dimensions for Trailer Hitches on 2018 Jeep JL Wrangler UnlimitedI was able to go out to our warehouse to measure the 3 trailer hitches available that are confirmed to fit your 2018 Jeep JL Wrangler Unlimited. On each of them, I measured from the front mounting plate where it will attach to the back of your Jeep's frame, to the outer edge of the hitch receiver. You can take these measurements out from the back of your Jeep's frame where the hitch will attach to see exactly how far out each hitch receiver will sit in relation to the rear bumper. On...
view full answer...![]()
![]()
![]()
- How Difficult is Curt Trailer Hitch and Wiring Installation on a 2019 Jeep Wrangler UnlimitedThe Curt Trailer Hitch # 9883544 that you were looking at has actually has a 20 minute estimated install time by Curt so even if you aren't very familiar with trailer hitch installations you can be very confident about this installation. Just make sure that you have a torque wrench that can at least hit the 150 ft-lbs mark like part # ALL944001. I do recommend the Curt Trailer Hitch # C13392 instead though. This has the same installation as the one you referenced with the only difference...
view full answer... - Trailer Hitch for 2018 Jeep Wrangler Rubicon JLU With Kuat Transfer 2 bike rackWe do not have the distances from the center of the hitch pin hole to the edge of the spare tire for either the Draw-Tite # 76104 or Curt # C13392 hitches on a 2018 Jeep Wrangler JL, unfortunately. That said, the accompanying photo does show the Curt hitch on a '18 Wrangler JL, and it sticks out to about the edge of the bumper; the Draw-Tite has some photos in the linked directions that make it look like it also sticks out to at least the edge of the bumper. Another thing to consider...
view full answer...![]()
- Installation of Trailer Hitch on 2018 Jeep Wrangler JL with Additional Bracket at FrameThe Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #36424 has been discontinued but was a fit for the standard bumper on a 2018 Jeep Wrangler JL. It will not slip over the bracket you reference so it is not a fit for your specific vehicle due to that bracket. Instead I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13392 which doesn't have the weldnuts attached to the hitch. This will allow you to attach the hitch underneath the bracket...
view full answer...![]()
![]()
- Spare Tire Mount Bike Racks for a 2018 Jeep JL Wrangler Unlimited with Backup CameraThe Hollywood Racks SR1, # HRSR1, fits around the spare tire on the 2018 Jeep Wrangler Unlimited (JL) and thus would only block the backup camera when loaded. The same goes for the Malone RunWay # MPG2148. There is a high probability that you could use your swing-away rack with hitch # C13392 or # 76104 assuming you are using the stock spare tire size. On your Jeep the hitch receiver opening will be just about flush with the bumper which will be directly above it with maybe a 1 inch...
view full answer...![]()
- Recommended Trailer Hitch Receiver for 2018 Jeep Wrangler Unlimited JK and JL ModelsAll of the JL Wrangler Unlimited hitches we carry will work on the JK Wrangler Unlimited models, but there are some JK model hitches that are not compatible with the JL Wranglers based on fit guide from the manufacturer because they have a shorter receiver. The bolt mounting holes are in the exact same location. Unless you are doing rock crawling, I recommend getting the longer receiver like the # e98856 or Curt # C13392 which will allow more accessories such as bike racks and cargo...
view full answer... - Best Trailer Hitch Receiver for a 2018 Jeep JL Wrangler I do have options for you but the Curt Trailer Hitch Receiver part # 9883544 is not a confirmed fit for a 2018 Jeep JL Wrangler. Instead, you will want to take a look at either the Curt Trailer Hitch Receiver part # C13392 or the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76104. The above two options are both direct bolt-on fits that have a Class III rating with a 2" receiver tube opening. I recommend using the Draw-Tite Max-Frame as it is currently the more cost effective option....
view full answer... - Recommended Trailer Hitch Receiver for 2018 Jeep Wrangler JL Unlimited SaharaFor a similar trailer hitch receiver, I recommend the Curt Trailer Hitch Receiver # C13392. This is a confirmed fit for 2018 to present JL Wranglers. The Curt Trailer Hitch Receiver # 9883544 is a fit for the 2018 JK Wrangler models only. If you need trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786. This custom-fit T-One connector plugs into your Jeep JL Wrangler Unlimited's wiring harness, which is located behind...
view full answer... - Can I Use Hopkins HM56200 With Curt Trailer Wiring C55124 On 2016 Jeep Wrangler Unlimited I recommend the Curt Trailer Hitch Receiver part # C13392 for the 2016 Jeep Wrangler Unlimited because it is longer compared to the other options to clear the spare tire if you ever decide to carry a bike rack or cargo carrier. I have attached an installation video for your reference. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C55124 for the 2016 Jeep Wrangler Unlimited without tow package plugs in line with the Hopkins Tow Bar wiring part...
view full answer... - Recommended Bike Rack and Hitch Receiver for 2018 Jeep JL Wrangler with E-BikesFor your 2018 Jeep Wrangler JL, the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76104 is a great option made by the same manufacturer as Reese components. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13392 is also a great fit for your Jeep with the rear spare and has a thicker powder coat but a lesser tongue weight rating. Either option will work well for your bike rack. Both the Curt and Draw-Tite hitch receiver options will require...
view full answer... - Will Yakima Full Swing Fit on 2019 Jeep Wrangler Sahara with Spare Tire?When we installed Trailer Hitch Receiver # e98856 on a 2019 Wrangler Unlimited, we found it was 8-1/2" from the hitch pin hole to the edge of our spare tire. I attached a picture below so you can see if it matches your own hitch. The Curt Trailer Hitch part # C13392 actually sits out even further and only needs 7.5" clearance. I attached a video below of the # e98856 review. They usually mention spare tire clearance midway through the video. As for if the Yakima FullSwing # Y02465 will...
view full answer...![]()
![]()
- How to Use Yakima SkyRise Rooftop Tent With 2019 Jeep Wrangler UnlimitedWe do have an option for you to still be able to use your tent, although the Yakima SkyRise Tent # Y07437 is only compatible with roof racks that fit on raised side rails, fixed mounting points, or flush side rails. A Jeep Wrangler such as a 2019 Jeep Wrangler Unlimited, does not have any type of rails or mounting points, so there isn't a roof rack that can support a SkyRise tent on this particular vehicle. You are not out of luck though, because you can still use the tent, but it will...
view full answer... - Will the Yakima FourTimer Bike Rack # Y02469 Fit a 2014 Jeep Wrangler with a Spare TireThe Yakima FourTimer # Y02469 is an excellent bike rack! Although I don't know off-hand if it is compatible with the spare tire on your 2014 Jeep Wrangler I can give you some distances that you can use to determine fitment on your end. From the center of the hitch pin hole to the nearest wheel cradle is 17" and the bike rack has a 4" rise in the shank. I am not sure if you will be able to fold it but if you were to try then from the center of the hitch pin hole to the closest part of...
view full answer... - How to Use Rooftop Tent with 2019 Jeep JL Wrangler Unlimited Rubicon with Sky One-Touch Power TopThere is a way for you to use a rooftop tent with your brand new 2019 Jeep JL Wrangler Unlimited Rubicon with the Sky One-Touch Power Top but there is not going to be a roof rack that is compatible. The reason for this is that since your Power Top is not a complete hard top there are currently no racks that are a fit; I checked with each of our rack manufacturers and there are currently no fits. It is possible there may be at some point but since this is a new application there is nothing...
view full answer... - Recommended Curt Trailer Hitch for 2018 Jeep JL Wrangler SportYou can install the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118786 on your 2018 Jeep JL Wrangler Sport so long as the flat tow wiring kit you used does not connect behind the tail lights, which you will need in order to install Harness # 118786. The diodes themselves will not be an issue as they are essentially just a gateway. A trailer hitch is also compatible with a flat tow set up and since you mentioned a Curt hitch I strongly recommend the Curt Trailer...
view full answer...![]()
Do you have a question about this Trailer Hitch?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hitch for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
Michael B
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Updated by:
Sarah W
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.