Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13360

lowest price pledge

Retail:$198.39

Our Price: $119.87

You Save: $78.52
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 33 lbs

Quantity: 
In Stock
C13360 - 1000 lbs WD TW Curt Trailer Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Videos


  • Curt
  • Class III
  • 2 Inch Hitch
  • 6000 lbs GTW
  • 600 lbs TW
  • Custom Fit Hitch
  • Visible Cross Tube
  • 10000 lbs WD GTW
  • 1000 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13360 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (16)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C13360

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 10,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,000 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13360 Curt Class 3 Trailer Hitch Receiver



C13360 Installation InstructionsInstallation Details C13360 Installation instructions

This Product Fits The Following Vehicles

2007 - 2008 Lincoln Mark LT

2006 - 2006 Lincoln Mark LT Built after 8/2005

2006 - 2008 Ford F-150 without factory hitch




Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Trailer Hitch Installation - 2008 Ford F-150

Speaker 1: Today on our 2008 Ford F-150 we're going to take a look at and also show you how to install the CURT custom fit Class 3 trailer hitch receiver. Offering the 2" by 2" receiver tube opening, its part number is C13360. Now here's what your hitch will look like installed. As you can see, we've got the square crosstube. It's going to come to your frame brackets, those will come over two attachment points on each side. Really straightforward attachment there, and then we've got two bolts here in the middle.

Definitely something you can easily do in the driveway, get completed in probably under an hour.Now in the middle we've got our receiver tube opening. This is going to be 2" by 2". See that nice flush reinforcement collar around the end there. Now this is going to be ideal for just about any type of hitch accessory that you'd want to use. Typically if they make it to fit a hitch, it's probably going to come in a Class 3 variety.

This is going to work out really well for your cargo carriers, for your bike racks, but think being that it is on a truck, you're probably going to be looking at towing more often. Plenty of ball mounts out there available to get the right size you need.Now to secure all those items in place, you're going to use your 5/8 diameter pin hole. See there's a good amount of room all the way around there. Whatever type of accessory you choose, you want to be sure it's rated for a Class 3, but standard pins and clips, locking hitch pins, or even anti-rattle devices should work out really well.See our safety chain connection points are going to be plate style. That's pretty typical of most of the hitches designed for the F-150 in this year range.

For your smaller safety hooks you can see no issues getting those connected. If you're using a little bit larger trailer that maybe has the larger clevis hooks, also no problem with connecting, although these don't rotate all the way around. Not that you need them too. Also, taking them off's pretty quick and easy.Now the hitch is going to offer a 600 pound tongue weight rating. That's the maximum downward force you can put at your receiver tube opening.

It gives you a 6,000 pound gross trailer weight rating. That's the total weight of your trailer and anything you we're to load up on it. It's also rated for use with weight distribution. If you decide to use a spring bar or torsion bar setup, that tongue weight rating, it goes up to 1,000 pounds. The gross trailer weight rating's going to go up to 10,000 pounds. Certainly though, you want to check the owner's manual on the F-150 to see what its tow rating is and not go over that.Now a couple of measurements you may find helpful when selecting your ball mount, bike rack, or hitch cargo carrier will be from the ground to the inside top edge of our receiver tube opening, we've got about 16-1/4". Then from the center our hitch pin hole to the outermost edge of our bumper, it's about 1-3/4".Now with the help of an extra set of hands we're going to get our hitch lifted into position. You'll notice that we've removed the spare tire. That just really makes it easier for you to see. If you can't get to the bolts, might be a good idea for you to lower yours. We just want to bring our hitch up. You can see that we've got a tab here. It's got a hole in it. The carriage bolt's going to go through that right into the frame. Once that's through, we're going to thread on our flange nut there. When you have three or four good turns on it, you can let it rest there while you get the rest of your fasteners started.Now on each side, if we follow our plate up there's another hole here in the frame. Another carriage bolt's going to go from the hitch side through the hole and thread on a flange nut. We'll do that on both sides. Now for our center attachment point, we'll use our larger hex head bolt. You want a flat washer on that. We're going to go through the hitch and through the factory safety chain connection point. Then we'll use our larger flange nut there and get it secured. We're going to have one of these to do on both sides so we'll get those on, and we can start snugging down our hardware.Now for those we'll use a 15/16 socket and wrench. Our exterior carriage bolts, we're going to use a 19mm. Now we'll get all of them torqued down to the specifications. Those'll be listed on your instructions. With everything torqued down, if you took down that spare tire, now's a great time to get it put back in place. That will complete our installation of the CURT custom fit Class 3 trailer hitch receiver, part number C13360, on our 2008 Ford F-150.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13360

Average Customer Rating:  5.0 out of 5 stars   (16 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- C13360
by:
2007 Ford F-150

It arrived as scheduled and was just as described. I put it on the day it arrived and everything worked and is good. I will buy from etrailer.com again . Thanks! 496916



- C13360
by:

Easy to install without having to remove anything or put truck on a lift. Bolted right into place. 653498



- C13360
by:

The product arrived in great shape me and a friend installed with no problems. Used to pull a trailer with my cruiser motorcycle and other items for my move from Houston, TX to Colorado Springs. I had no problem at all with the hitch. I have not had occasion to use it again but am confident it will perform anytime I need to use it. Excellent product. 635145



- C13360
by:

Good product. It arrived on time and was well packaged. Took a little work to get it installed, and you’ll need a torque wrench that goes to 210 lb ft!! 615459



- C13360
by:
2008 Ford F-150

Very well built. Fits my F 150 truck perfectly.The shipment arrived early and l was very excited to see if it was a match. It was an excellent fit. I love the way it looks on my truck. 606709



- C13360
by:
2007 Ford F-150

Just received an other order from etrailer. A USA made product. A Curt Trailer Hitch Receiver. Im going to install it and not look back. I know it will preform well because it was made by American SKILL WORKERS. Thanks etrailer. Dont worry about warranty it will last for ever. USA MADE. 587778



- C13360
by:

It bolted right up. Ain't pulled nothing with it yet but I'm sure it's gonna be good. 541635



- C13360
by:
2008 Ford F-150

This product fit my 2008 F150 perfectly. Easy install as it took only 20 minutes to install. Would highly recommend 538533



- C13360
by:
2006 Ford F-150

the hitch is very HD and fit as expected, it has done its job pulling a double horse trailer multiple times for hundreds of miles, good product good price 520478



- C13360
by:
2008 Ford F-150

Out of the box and on my truck in 45 minutes. It fits perfectly. 506485



- C13360
by:

Bolted right up and looks great. Towed a well-loaded rental from Iowa back to Texas without a hitch.....pun intended. Still looks like new after a year. Heavily recommend this one. 465531



- C13360
by:
Ford

The best $100+ I've ever spent on any vehicle. Shipping was on time and the hitch construction is excellent. Installation was a breeze, a 40 minute job inspite of 100* Texas temperature, a few minor tweeks to the original bumper mount bolts and I'm ready for a boat or large loaded utility trailer. The local Ford dealer, U-Haul and several Travel Trailer outlets wanted $240-$300. for anything comparable. I will highly recommend eTrailer to anyone in need of a strong well constructed hitch. Sincerely, W. Harper San Antonio, Tx 418534



- C13360
by:

My friend and I installed this hitch receiver in about 20 minutes. Pretty simple, just 6 nuts and bolts. A little help from the rubber mallet and the impact driver and she was on there nice and tight! 398312



- C13360
by:

Just got all the parts i ordered will be installing soon arrived undamaged and packaged well everything is in great shape and better quality now to install hitch and brake controller and rv plug 360057



- C13360
by:

Fast delivery, perfect fit, very well made. Installation was easy and fast. I had this hitch on and ready to tow in a half hour. 359304



- C13360
by:
2006 Ford F-150

This hitch fit well and did not require any modifications to install. Thanks Roger 328137


16
16

Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?




    • Why etrailer.com?

      At etrailer.com we guarantee:

    • Highest quality trailer hitch for the best price.

      Our Lowest Price Pledge ensures you will never overpay for the parts you need.
    • Real product know-how.

      We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
    • Most detailed, accurate trailer hitch information available.

      Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
    • Installations, made easy.

      We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
    • Fast shipping.

      Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
    • Personalized service for life.

      We provide one-on-one, personalized service from the ordering process through the life of your product.
    • Trusted since 1946.

      We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
    • Returns Policy

      Satisfaction Guarantee
      Need to return an item? No problem. Please read our Returns Policy for more information.

    Info for this part was:

    Video Edited:
    Jacob T
    Written by:
    Laura H
    Test Fit:
    Randy B
    Video by:
    Zach D
    Photos by:
    Jeffrey L

    At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.