Product Experts Available Now!
Call 800-298-8924
/
Curt/
Class III/
2 Inch Hitch/
6000 lbs GTW/
900 lbs TWItem # C13152
Retail:$204.61
Our Price: $119.95
You Save: $84.66To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Installation Details 
2014 - 2015 Kia Sorento EX V6 with Factory Tow Prep Package
2014 - 2015 Kia Sorento EX V6 without factory Tow Prep Package
2014 - 2015 Kia Sorento Limited V6 with Factory Tow Prep Package
2014 - 2015 Kia Sorento LX I4 models
2014 - 2015 Kia Sorento LX V6 with Factory Tow Prep Package
2014 - 2015 Kia Sorento LX V6 without factory Tow Prep Package
2013 - 2018 Hyundai Santa Fe Sport
2014 - 2015 Kia Sorento SX V6 with Factory Tow Prep Package
2014 - 2015 Kia Sorento SX V6 without factory Tow Prep Package
Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2018 Hyundai Santa Fe, we're going to be installing a Class-3, 2-inch Curt Trailer Hitch Receiver with part number C13152. And this is what it's going to look like once you get it installed. Most of it's going be tucked up underneath, but there is still going to be some of it visible on the outside.It has a five-eighths inch hitch pin hole, and a hitch pin and clip, which is not included, but can be picked up on our website with part number PC3. It is a plate style safety chain loop, so it's going to be quite wide, although it is a little thicker, but you should still be able to use your safety chains at just about any angle.It also features a reinforced collar. It is a 6,000 pound gross trailer weight, which is the weight that it pulls behind it, and a 900 pound tongue weight, which is the force going down on your receiver hitch tube. It also works with weight distribution systems, and while utilizing one, it increases the gross trailer weight rating to 8,000 pounds, while the tongue weight rating remains the same at 900 pounds.And now I'm going to give you some measurements to help you on deciding on accessories, such as ball mounts, bike racks and cargo carriers.
From the center of the hitch pin hole to the rear of the bumper, it's going to be about 5.5 inches. And from the inside top edge of the receiving tube to the ground, it's going to be about 13.25 inches.Now to begin our install, we're going to need to remove the spare tire. We've already gone ahead and done that. Next we'll need to remove the drivers and passengers side under-panels. You'll need to remove the push pins, and then just pull it down.
You can use a screwdriver, or body panel tool to remove your push pins. And now repeat the same process on the other side.Now when removing your panels, if the nuts do not pull off with the panel, you just need to unthread this, and then you can reinsert it back into the panel you removed. Before you remove your exhaust, you'll want to put a strap up to catch the exhaust to keep it from falling down too far and causing any damage to the vehicle. Once you've got a strap in place that'll catch it, you can take the exhaust down. Next we'll need to remove our exhaust hangers to lower it down.
You want to use some spray lubricant to make it easier to remove the hangers. To remove the hangers, find a good place to pry from, and just push them off. You need to do that for all three hangers. There's one located here, here and here towards the front of the vehicle.Now on our drivers side, you're going to need to take the bumper alignment pin, and bend it down a little bit so it's out of the way of our hardware. Just enough to give you clearance to put your bolts in.
Now we'll look at our passenger side, it doesn't look like it's going to be a problem, but if on yours it's a little bit closer to the hole, you may need to bend this side as well.Now before we put our hitch up, we're going to want to clean out our weld nuts to make sure that the bolts go in clean without holing. You'll use some spray lubricant, and a brush to clean it out. You can get this brush on our website with part number 814092. Do this for all four holes. Now it's recommended to grab an extra set of hands to help you hold the hitch in place, so we're going to line it up, up there, and get a bolt started on each side. You want your conical tooth washers installed with your bolts with the teeth pointing up towards the hitch.And once you've got it loosely installed, the hitch will hold itself in place so you can install your remaining hardware. Now when putting your hitch into place, make sure that the hitch goes between the frame and the bumper alignment pin on the passenger side. Next on the drivers side we're going to install our carriage bolts. Starting from the outside of the frame, slide the bolt through the hole, and you need to wiggle your hitch up and down a little bit to get it in place. Now do this for both holes. Now get the larger flange nuts and thread them on, and do this for both bolts. Now on your rear bolts here, you may need to bend your bumper alignment pins slightly out of the way, so you can get your hardware installed.Now repeat this process on the other side. And the only difference on your passenger side is you'll have a plate that needs to be installed on the outside when you slide your bolts through. And again, you may need to bend your bumper alignment pin out of the way to get your hardware installed. And now we need to go back and tighten up all our hardware. The lower weld nut bolts are going to use a 17 millimeter. And your upper carriage bolts will tighten down with a 19 millimeter.And now with everything tightened down, we can go back and torque our hardware to the specifications in the instructions. Now with our hitch installed, all we need to do is put our exhaust back up, our side panels, and then reinstall our spare tire. And do this on both sides.And that completes our installation of the Class-3, 2-inch Curt Trailer Hitch Receiver on our 2018 Hyundai Santa Fe.
Average Customer Rating: 4.9 out of 5 stars (417 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. by: Jeffrey10/16/2018
I just wanted to say that it's been over a year since I purchased this hitch receiver. It has held up really well. The install was incredibly easy from the instructions and the video. Honestly, my biggest challenge was cleaning the rust out of the threads of my vehicle's undercarriage. We use this thing all the time for our bike rack and cargo rack. I have no doubt it would work well in any other scenario that it is meant for, with regard to towing. I would definitely purchase from etrailer again. I probably saved over $500 by purchasing from them and doing this myself. It took me less than an hour. 574858
by: Michael T10/13/2018
I am happy with the trailer hitch. The price was fair and it was delivered quickly. The installation was just as easy as the video showed it to be. The hitch was a perfect fit for my vehicle. thanks... 574048
by: Amick10/17/2018
Looks great! It seems very sturdy. I haven't installed it yet 575119
by: Duane10/08/2018
The install was super EZ and went exactly like the video. Would have gone faster and smoother if I had a lift but even with the car on ramps we were done in under an hour including the wiring harness. Thank you E-trailer. 572657
by: Rinny10/10/2018
Product is great Adam was very helpf ul 573161
by: Shirrell10/08/2018
product has worked great on our kia.... ..... 572720
by: James09/25/2018
I Have a Kia Sorrento 2015 and received hitch and wiring harness fits perfect directions were great follow them and you’ll have no problem I’m 70 years old and put it up myself within one hour I have bought hitches from them before and will again great to deal with thank you again 568684
by: Maverick10/03/2018
product performed as expected 571207
by: Stephen J.06/03/2016
The hitch seems extremely sturdy. Installation instructions were good, the video even better. It was my own stupidity that made me take some time to realise there are three separate hangers for the exhaust that need to be released, to allow the exhaust to be moved sufficiently out of the way to allow fitting. Once I moved the exhaust, it was fine to fit. Note that the hitch is heavy, and without a board or raising the car, the installation work is pretty physical! I give the product 5 stars, and I wanted to give etrailer 5 stars as well for their excellent site, great videos, and strong follow up. However, despite all that they shipped the product several days after the order was placed, and so missed the expected delivery date by close to a week - which was irritating 256488
Its worked out great, no issues at all!
Stephen J - 06/03/2017by: ALAN H10/22/2015
VERY NICE WORKMANSHIP, THE INSTRUCTIONS AND PICTURES WERE EXACT. WE WILL USE THE HITCH FOR A LUGAGE CARRIER. WILL RECOMMEND ETRAILER TO OTHERS. THANK YOU. 230561
great product and dealing with you
ALAN H - 10/22/2016by: Panda06/01/2017
The hitch was EXTREMELY easy to install. I work for a Hyundai dealership and our cost on the factory hitch was nearly 3 times as much as the Curt model. After comparing both side by side, I can honestly say that the OEM part is inflated only due to the fact that it has the manufacturer's logo on it. The install was exactly the same for this hitch as the OEM model, just at a fraction of the cost. With eTrailer's "How To" videos, anyone with some basic tools and ability to follow directions can do this install. While having a friend assisting you with holding the hitch to the frame is nice, it is definitely doable as a solo job. Thanks so much to the team at etrailer for the amazing price, customer service, & support. You made this WAY easier than it initially appeared! 387552
Thanks so much for the follow up! I’ve recommended many people to etrailer for their towing needs over the last year, not only due to the quality of products, but the customer service as well! I work at a Hyundai dealership and I can attest that the hitch setup is a PERFECT fit and a far better value than OEM at a 1/4 of the cost! Thank you guys for offering great prices, easy to follow instructional videos, & excellent customer support!
Panda - 06/04/2018 by: Robert09/20/2018
I couldn't have asked for something better, very easy to install, have used it several times, and has the been the best trailer hitch I've ever gotten. 566961
by: Bobby W.08/13/2013
This hitch bolted right up to my 2013 Santa Fe. No issues. The instructions were detailed down to every detail. This hitch looks very good on my Santa Fe. It is tucked very nicely under the vehicle. 94773
Still very satisfied.
Bobby W - 08/14/2014by: Xue F.07/18/2017
It's working perfectly 407382
by: Eric05/21/2018
Received hitch & it is now installed. Only took my son-in-law & myself about an hour. Thanks for sending the link to the installation video. Was a great help. Filled out the survey. Thanks, again, for all your help. 511741
by: William03/18/2018
Quality of product is excellent. Very tight fitting unit. Videos were very good and very helpful. Would have liked in the instructions to make it clear that both bumper alignment pins need to be moved, not just maybe the one on the passenger side, it has to be moved. Also would have liked to have seen how the most forward exhaust system rubber mount was disconnected. I'm sure there is a better way to do it than I did, LOL, it was a real hassle. 486378
by: Richard07/05/2018
I watched the video before ordering. A must. I was able to see what I needed to find out before ordering. It was very helpful. I found out the wiring I had and was able to order the correct harness. It was sent very quickly. I opened the box and started . It took me (doing it alone) less then 1&1/2 hours from start to finish including wiring. It fit like a glove and I am very pleased with the quality of the produce and the information they provided on the video. PS: you may want to have not only the required sockets but open end/box wrenches as well as it helped me with the installation. Great product Thanks 530190
by: Mike06/04/2017
I installed the Curt Trailer Hitch Receiver onto a 2017 Hyundai Santa Fe Sport. The dealership was going to charge $500.00 for a hitch receiver and $110.00 per hour for labor. I am a data analyst and work on a computer all day and have to real experience with tools. But reading the reviews gave me confidence I could install the hitch receiver myself, which I did. The installation took me ~1.5 hours. The installation video was very helpful. Doing the installation myself saved me a lot of money. The hitch fits like a glove. 388696
by: Ron R09/22/2015
Great video to prep me for doing the job, I used an axle Jack to support the muffler once the hangers were off. Needed some help when holding the hitch up to the frame, after that it was very easy. 227041
thanks for asking about the hitch, and wiring kit. Everything is working as it should, no complaints.
Ron R - 09/21/2016by: Tommy T.07/24/2017
Thanks the hitch works great,and was easy to install 409870
by: Francis Whitney01/31/2014
Hi Installed Hitch today as i'm 81 years old not as fast as i once was took me 2 1/2 hr. my exhaust was different than the one shown split pipe in back of resonator worked fine. Had to rework plastic under body panels before they lock on top. other wise looks good 115360
by: David F11/18/2016
Easily installed took 30 min by myself. I can write all day but it was cheap it was delivered fast i did it myself and it works. Looks great as well. 317770
by: John C01/24/2014
Bolted right up very easy and instructions were right on. Looks good. Thank you. 114614
John,Nice install. Where did you find the little box to store your four pin plug? Im not a fan of the wire hanging.Thanks,Shawn
-- comment by: Shawn - 10/02/2014by: Tom P09/10/2018
Installed your Class 3 hitch on my 2018 Hyundai Santa Fe. After watching your video, it was a breeze to install. The video made it simple. All parts fit perfectly, including the wiring kit. I would recommend eTrailer for hitch products. They’re the best. 563591
by: Buck09/06/2018
Slightly harder to install than the instructions said, and I am a very “handy” guy. The bolts need to go on in a certain order, of else the holes don’t match up. Also, leave everything very loose until all bolts are in place, then start to tighten, or you won’t get them in. That said, once installed, this hitch works great. It fits the pre-drilled holes on my wife’s Santa Fe to a gnat’s a___. We bought a bike carrier to slide in and it is light enough for her to put on and off by itself. 562096
by: Charlene R.04/03/2014
I purchased the Curt Trailer Hitch Receiver on Sunday 3/23 and had it at my front door a few days later. The hitch was installed on a 2013 Hyundai Santa Fe Sport 2.4 by my local Hyundai dealer in less than an hour. I also purchased the Curt Hitch Extender for 2" Hitch Receivers - 8" Long - C45791 as the hitch will be used for our Thule bike rack. This allows for ample clearance from the back of the vehicle. As far as eTrailer.com and their customer support staff...they were excellent to do business with. Very helpful and knowledge. It was welcoming to get personal responses instead of auto-emails. Great user-friendly website too! 123664
Just waiting for warm weather to get the Thule bike rack back on hitch. Still working out!
Charlene R - 04/03/2015by: Gene E12/28/2015
Perfect fit and extremely easy installation on my wife's 2013 SantaFe Sport. Only took me about 30 minutes, after watching the etrailer installation video. Best of all, the hitch didn't cost me $697.00 as it is listed on the Hyundai accessories website - that's absolutely crazy!! I would recommend you check to see if you have the factory tow connection already on the vehicle before ordering the wiring kit. All I needed was the C56151 kit, which plugs directly into the factory plug just behind the driver side rear tire. I ordered everything before checking and selected "without factory tow package", since there wasn't a tow hitch already installed on the vehicle. The wiring kit recommended was C56184, which will work, but is a more complicated installation. It would be great if there was a prompt telling you to check for the factory plug, prior to ordering the wiring kit. My wife is now very happy that she can tow our small utility trailer anywhere she wants. THANKS etrailer.com! 234405
1 year later and still looks like the day I put it on. Great product!
Gene E - 12/27/2016by: Otto09/12/2018
I had the trailer hitch and wiring harness installed yesterday! A perfect fit! Thanks for your fast service in sending the order out quickly. 564290
by: Anders G.05/16/2013
Arrived quickly, so that's a plus. The way this slides into place on the 2013 Hyundai Santa Fe there is an alignment pin where the bumper is slid forward during the car assembly that is close to where the bolts are. I was impressed by the precise construction of the hitch that it slide up into place without interfering with alignment pins. I did have to bend the driver's side pin just a touch (as instructed by the instructions) to get a proper socket on one of the large nuts to apply the correct torque. I'm talking 3 millimeters or something. Not a worry at all, all stock use of the pin is completely retained. Heavy duty powdercoating. Not that you'll get much chance to appreciate it, since once it's installed, the hitch is super stealthy. The picture attached is taken just a couple feet off the ground. I installed it in my driveway without a lift, just a couple of drive up ramps. I don't LOVE rolling around on concrete, but meh, it's totally doable. The time estimates given, I'm guessing, are for using a lift. From start to finish, including being called in for dinner, and picking up all my tools afterward, it took me a couple hours. 80549
A year later, everything is still fine. No rust spots that Ive noticed.
Anders G - 05/16/2014by: Keith10/02/2014
I purchased the T-one vehicle wiring harness, along with the Curt trailer hitch receiver, for my new Santa Fe Sport. The dealership Service Department did the installation for me in order to maintain my warranty on the vehicle. The cost of the tow hitch set-up and the cost of dealership installation was significantly lower than if I were to have had the dealership order the parts. In fact, it was more than a 50% savings. The Hyundai salesman and Service Department were so very impressed with the price and quality of the tow hitch and kit, I was delivered, that they requested eTrailer.com website from me for referral to their future customers that are looking for additional ways to save money in their new car buying experience. My vehicle look exactly like the pictures provided on etrailer.com website. My Santa Fe happens to be the same color as well. Again, I had the trailer hitch receiver, along with the tow kit, installed professionally at the dealership for more than 50% of the price if I would have purchased the vehicle with the hitch included. All parts were exact fitting as described, e.g., no welding, modifications, and so forth. 154177
by: Sean06/18/2017
This hitch looks and works great. It fit perfectly and bolted up to my vehicle with ease. 395781
everything I purchased is working great etrailer is the only place I shop when it comes to products of this nature. Thanx for the follow up.
Sean - 06/19/2018by: Jim S08/07/2016
eTrailer; Thank you. All went exactly as advertised and shown via your internal/YouTube videos. I installed C13152 on my 2013 Hyundai Santa Fe SPORT (2.4L). Per your internal video, I simply bent the bumper pins out of the way with a deep socket/pipe. I didn't even move the exhaust for the install. However, i'll probably have to move it when I torque the nuts. This hitch clears the stock bumper, which means it's lower than the exhaust tip. I wanted to use C13153; which is about 4" higher, ... basically, level with the exhaust. However, this fits (not 100% sure it fits the SPORT too) the GLS/Limited model, which has a removable cover to hide the hitch. If you can find replacement portion of the stock Sport bumper, I bet many would be interested in that option. I saw some old (2012) chats where Australian users cut a hole in their bumper. Ultimately, my towing needs are minor, so I went with the C13152. I'm sure i'll find the appropriate ball mount rise for my needs. 281194
Well ...My trailer was so rotten with non-functioning lights, that I didnt have a chance to test it mainly the wiring harness that ties to the stock trailer connections. On top of that, I moved to a new house where I cant store a trailer, so I sold it. My etrailer Curt hitch still needs to be broken in! Regardless, I still regard your company in high regard and recommend you anytime I hear of someone looking for a hitch.
Jim S - 12/13/2017by: Gary H.12/09/2017
Fits perfectly on 2018 Santa Fe Sport. Watch the video for detailed instructions on a 2017 Santa Fe Sport (exactly the same). Took me about 90 minutes start to absolute finish with only jack stands. If you don't have a torque wrench, be aware the torque specs are pretty high - be sure to use a long ratchet or breaker bar and tighten like crazy. Works great with C58000 adapter and 37185 4/7 pole connector (see pictures). 458735
by: Craig s07/10/2014
Item and install-flawless. Was able to work around bumper guide pins. Video of install was perfect. Took under an hour on new sorento. I could probably do it in 30 minutes if I was in a race 140694
Everythings good. Thanks
Craig s - 07/20/2015by: Matt09/08/2018
Awesome customer service. I had ordered the wrong wiring harness, called the customer support number and Dylan F handled everything professionally and promptly. 562791
by: Mark S.06/04/2017
This is the perfect rack if you think you might use your hitch for anything down the road - trust me, you will upgrade. Installation was straightforward. A word of caution. If you live where roadsalt is used, pick up an M10x1.25 tap and chase the weldnut threads in the frame. Mine were impossible to get the bolt into. Five minutes with a tap and I could thread them in by hand. I bought this hitch to carry a bike rack (for now - see upgrades!) and just a word of advice. The Thule T2 Classic is a great two bike tray. According to the Thule information, it will not fold up vertically on our 2015 Santa Fe Sport. It will work just fine. In my pics you can see the wheel tray comes close when the rack is centered. It's close but there's not enough play to hit the bumper. Both are great products - buy them from eTrailer! 388730
by: rondp206/16/2014
My install is for a 2014 KIA Sorento EX. First off the directions were dead on. Took me closer to 3 hours to do (not 30 minutes). I installed the electrical converter first then the hitch. My time includes everything from putting truck on jack stands to dropping it back on the pavement. I'm 60 years old and a little bit slower these days so I took my time (did I mention I did this all by myself). Removing and reinstalling the exhaust hangers was easier than I thought it was going to be. And the bumper guide pin did not get in my way. But there was a plastic pin hanging down on the passenger side just in front of the nut. I cut enough the get the socket over the nut and torque it down. I have ordered from eTrailer in the past and will definitely order from them in the future. 135744
by: Mark09/06/2018
Easy installation. I got it yesterday and installed it in about 1 hour. I wish it came with a wiring harness but other than that it's absolutely perfect. Great quality. 5 stars. 562185
by: Jose09/21/2018
perfect 567581
by: Heidi09/01/2018
Our hitch was delivered very quickly after placing our order. It was very good quality, easily installed and and fit perfectly. Highly recommend if you are in the market for a hitch 560666
by: Todd08/20/2018
A very good quality, nice looking hitch for our 2016 Santa Fe Sport arrived at our doorstep in a very timely fashion just as I was told (Thank you!). I personally installed the hitch and wiring kit, it was really straightforward. We are utilizing it for our move to Georgia. The value for the products was the best found, and I would highly recommend etrailer and your products going forward. Thank you! 555376
by: Vincent08/19/2018
Everything worked as promised and was easy enough to install that I did it myself and at 64 years of age. The only comment I would make is that they should provide a brush to clear the tapped holes in the frame that they suggest using. It would have made it a good deal easier to prep those connection points. 555208
I recommend nylon tube brush part # 814113
Nylon Tube Brush - 3/8"
$6.22 to clean out the weld nuts in the frame.
Heather A - 08/20/2018by: Antonio08/26/2018
Thanks it fits perfect wiring too instructions easy to install 558491
by: Arthur08/08/2018
Great Product and Top Service. The step by step video online was very helpful. Installed in about an hour. 551111
by: Anthony08/02/2018
Very pleased with the hitch and the electrical connector. Great quality and installation of both was a breeze. The directions were on point and the shipping was fast. Saved 200 doing the install ourselves.... 549002
by: Robby08/07/2018
The directions were little off . It took different tools than what's recommended. A 17mm wrench is key . The fit was perfect . 550741
by: Todd08/04/2018
Perfect fit and only 20 minutes to inst all. 549852
by: Todd08/04/2018
Perfect fit and only 20 minutes to inst all. 549834
by: James07/27/2018
Uhh, OK! I ordered this thing at about 2am Wed morning and it’s here on Friday? . Times they are a changing! Super fast. Thanks! 546770
by: Tucker07/26/2018
Good product, fast delivery, exactly what I needed. I will continue to utilize this website for any of my trailer needs! 546424
Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?
Do you have a question about this Trailer Hitch?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.