1. Trailer Hitch
  2. Curt
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # C12262
lowest price pledge
Retail:$266.02
Our Price: $159.88
You Save: $106.14
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 42 lbs
Quantity: 
In Stock
Curt Class II Trailer Hitch - C12262
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12262 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (1)
  • Q & A (3)
  • Videos (1)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C12262

  • Curt
  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • 350 lbs TW
  • Custom Fit Hitch

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Drawbar, pin and clip sold separately
  • Assembled in the USA


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12262 Curt Class 2 Trailer Hitch Receiver



This Product Fits The Following Vehicles




Video of Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2005 Chrysler Pacifica

Today on this 2005 Chrysler Pacifica, we are going to install part number 12262 from Curt. This is what the hitch looks like when it is installed. Now we will go ahead and give you some measurements. From the top of the receiver opening down to the ground is going to be 11-3/4 inches on this particular vehicle. And from the center of the hitch pin hole to the outside edge of the bumper is going to be 6 inches. Alright, next we will go ahead and show you how it gets installed. 0:23

The first thing we need to do is go ahead and lower the spare tire, give us some extra working room. And next we will go ahead and lower the exhaust. Before we lower the exhaust, we are going to put a strap across the bottom of it so it does not fall any more than it has to. And we will remove the two bolts at the very end, by the tailpipe. Next we will go ahead and remove these two bolts here and here for the bumper brackets and now lower the whole thing. The bumper will stay up because it is help up by the bumper cover. Alright, now we can go ahead and start installing the hitch. Now what is going to happen is the hitch is going to be sandwiched between the frame and the bumper bracket we just lowered. We will reuse the original factory hardware to hold everything together. Run it up about half way. Then go ahead to the other side and get the remaining bolt done there. 1:14

OK, there are two more bolts we need to install. And we are going to install them through this hole, out the bottom hole right here. We will use our fish wire tool, which is included with the kit. We are just going to take it, put it through the bolt hole we are going to use and then out the access hole. Take the block and thread it in. Let it fall into place. Take the bolt and thread it on and pull it on through. Then we will install the flange nut and we will go ahead and repeat back over on the driver side. Alright, now we can go ahead and torque down the bolts as specified in the instructions. Alright, now we can go ahead and reinstall our exhaust. We will go ahead and remove the strap and then we can go ahead and reinstall our spare tire. And that will finish it for our install. Alright and there you have it for part number 12262 from Curt.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12262

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

- C12262
by:

Prompt and free delivery. Package came un-damaged. Installation was quick and easy right on my own driveway surface. Pretty sweet and well designed hitch product that installed very easily in 1 1/2 hours. 16193


1
1

Ask the Experts about this Curt Trailer Hitch

  • Recommended Trailer Hitch for 2006 Chrysler Pacifica
    I do have a solution for you, however the Curt Trailer Hitch Receiver # C13362 referenced in your question is not designed to fit your 2006 Chrysler Pacifica. I instead recommend looking at the Curt Trailer Hitch # 13529. This Class III hitch is confirmed to fit your vehicle and will provide a 2 inch receiver opening with a gross trailer weight capacity of 3,500 pounds. No drilling will be required for installation. Keep in mind that the exhaust and spare tire will need to be temporarily...
    view full answer...
  • Trailer Hitch, Wiring Harness and Parts Needed to Tow Small Trailer with 2007 Chrysler Pacifica
    According to my research, your vehicle has a towing capacity of 2600 lbs. This means that the trailer you choose plus what's loaded on it should not exceed 2600 lbs. For a trailer hitch, I'd recommend the Curt Class III, part # 13529. You'll also need a trailer wiring harness, part # 118303. You'll also need a ball mount and the appropriately sized trailer ball and a hitch pin and retaining clip. When installed (assuming that your Pacifica has stock tires and ride height), the hitch...
    view full answer...
  • Concealed Trailer Hitch Receiver for a Bike Rack on a 2005 Chrysler Pacifica
    The most concealed hitch that fits your 2005 Chrysler Pacifca we have the Curt Class II, part # C12262. However, it isn't the best hitch for a bike rack, in my opinion, because it requries a stabilization strap, part # 18050, in order to be compliant with the hitch's warranty. Instead I recommend the Draw-Tite Class III, part # 75522. The strap isn't required and it's also a Class III hitch so it has a higher capacity and is compatible with more accessories. As you can see in the installation...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Mike L
Video Edited:
Andrew K
Written by:
Lindsey S
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.