fall hauling headquarters

Price: $121.24

In Stock

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # C12013

lowest price pledge

Retail:$201.67

Our Price: $121.24

You Save: $80.43
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 18 lbs

Quantity: 

In Stock
Trailer Hitch C12013 - Visible Cross Tube - Curt
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

Trailer Hitch C12013 - Visible Cross Tube - Curt
Curt Trailer Hitch - C12013
Trailer Hitch C12013 - 250 lbs TW - Curt
C12013 - 2500 lbs GTW Curt Trailer Hitch
Curt Trailer Hitch - C12013

Customer Photos


  • Curt
  • Class II
  • 1-1/4 Inch Hitch
  • 2500 lbs GTW
  • 250 lbs TW
  • Custom Fit Hitch
  • Visible Cross Tube
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number C12013 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (18)
  • Q & A (16)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C12013

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Drawbar, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 2,500 lbs
    • Maximum tongue weight: 250 lbs
  • Limited lifetime warranty


Note: All non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps. Failure to properly support these loads will void your hitch warranty from Curt.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



12013 Curt Class 2 Trailer Hitch Receiver



C12013 Installation InstructionsInstallation Details C12013 Installation instructions

This Product Fits The Following Vehicles

2003 - 2008 Toyota Matrix XR and XRS




Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12013

Average Customer Rating:  4.8 out of 5 stars   (18 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

- C12013

by:

Toyota Matrix


Fit perfectly on the XR and had no issues on the installation. With a 5" rise, the base of the coupler is about 14.25" off the ground. 408262


Comments

Good morning! The products have held up great. Thank you for checking in. Ill be looking into a hitch mounted back rack pretty soon.

Ben C - 07/20/2018

41221

- C12013

by:

2007 Toyota Matrix


Another great product for an excellent price from etrailer.com. Fast delivery as promised. This hitch, for my 2007 Matrix XR, went on flawlessly in about 10 minutes with a helper. Couldn't be happier with the hitch or the buying experience. 515322



- C12013

by:

2003 Toyota Matrix


Fairly happy with this product. There is a bit more "give" in the connection where I insert the hitch. Would t tho see that tighter, but otherwise pleased. 497829


Comments

Natalie, thank you for your review. I am not sure what accessory you are putting in the hitch but an anti-rattle device such as part # RM-061-125
Roadmaster Quiet Hitch for 1-1/4" Trailer Hitches
$24.95
should help tighten up the play.

-- Heather A - 04/18/2018

37376

- C12013

by:


Fit and installed exactly as described. Great purchase! 425919



- C12013

by:


Excellent Hitch, and the easiest installation. 4 Bolts and you're done! No Cutting, no removal of anything. Just hold it up, and bolt it in. Couldn't be easier!!! Very Happy Customer =) 420041



- C12013

by:


I ordered this for my 2005 Matrix XRS and it is a great fit! The install was very simple and the installation directions were very clear and easy to do. I would definitely recommend this to anyone in need of a hitch for their Matrix. We've towed a small fiberglass trailer many miles over the last year with no problems at all. 399734



- C12013

by:


No complaints! My friend installed it fairly quickly. My bike rack fits on it great as well. 357254



- C12013

by:


Trailer hitch was delivered promptly and adequately packaged. The longest part of this installation was getting my hands on the right TAP for the job. Living in the north east and having four seasons, coupled with having the car for 15 years, sure shows the signs of some rust. I sprayed some WD40 in the welded nuts and let it soak while I figured out how and where to get the right size TAP. A few days later a neighbor was kind enough to lend me the perfect size. For some reason it's easier to find the holy grail than that size of TAP in my area. I tapped the welded nuts and got all the years worth of rust and crud off. Then I used a small hydrolic jack to prop up the trailer hitch. I used loctite on the bolts and tightened them to the recommended torque. The entire install was surprisingly simple. The hardest part was finding the TAP and boring the holes. The trailer hitch looks well built and fits perfect. 344143



- C12013

by:


Product was as described. Good quality. 330558



- C12013

by:


Product is high quality, service form etrailer was great. Very fast shipping. 327524



- C12013

by:


The hitch went in without any issues. It looks great and does the job! I did not have the rusting issues a bunch of other comments referred to... I just cleaned out the bolt holes with a wire brush and the bolts went in just fine. I did put some thread lock in there just in case. 107710



- C12013

by:


Easy to install even by yourself (would be easier with a second set of hands). I would recommend buying an M12 x 1.25 tap to clean out the threads if you live anywhere where there is snow because they are pretty much unusable unless you run a tap through them. 75399



- C12013

by:


It looks great on the car. I'll have to pull something before I know how well it works. Thanks, Wilson 58304



- C12013

by:


After finally getting the rust out of the weldnuts using a tap, the installation was a breeze: took about five minutes. Fits snugly and is hardly noticeable under the bumper. Looks like a high quality product. Thanks! 41042



- C12013

by:


The hitch installed as advertised! Thanks for the excellent service! 39733



- C12013

by:

2008 Toyota Matrix


Pictures attached from my Hitch install on my (new to me) 2008 Toyota Matrix XR. Nice easy install and looks good. I was concerned that the "rear spoiler" would be a problem. It was not an issue. The wiring harness was also an easy install. The dealer wanted about $500 for the whole job including the wiring harness. After I looked at the video clips, I decided to do it all myself. I'm very pleased with the whole process and the results speak for themselves. 19252



- C12013

by:


Fit perfectly. Definitely hard to satrt the screws as there was some rust, otherwise was easy to install. 16336



- C12013

by:


great hitch, easy to install 6716


34
34

Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Comparing Trailer Hitches # 12221 and # C12013 for a 2007 Toyota Matrix
  • I went out to the warehouse and examined the Curt Hitch # 12221 and # C12013. While they are similar, there is a key difference in the designs. From the top of the mounting brackets on each side of the hitch down to the bottom of the receiver, hitch # C12013, hangs lower. This makes sense because it is designed to fit all models including XR and XRS of the 2003 to 2008 Toyota Matrix. Some models have a rear fascia that hangs lower so a hitch that hangs lower is needed. Since you...
    view full answer...

  • Trailer Hitch and Wiring for a 2005 Toyota Matrix
  • Curt trailer hitch # C12221 would be a good option as long as your 2005 Toyota Matrix is not an XR or XRS model. If it is an XR or XRS model then # C12013 would be the best option for a Curt hitch. These are both Class II hitches which means you have to use the ball mount recommended by the hitch manufacture so as not to void the hitch warranty. This will limit the amount of rise you can get to be able to tow the trailer level. Based on the picture you have sent you will need a good...
    view full answer...

  • Trailer Hitch and Ground Clearance for a 2006 Toyota Matrix XRS and Curt Trailer Hitch # C12013
  • The Curt trailer hitch # C12013 will have the receiver just below the rear fascia on your 2006 Toyota Matrix. Take a look at the review with pictures on the product page to get an idea of where it will be. Curt does say that you need to use a stabilization strap, # 18050, for any non-trailer loads such as a bike rack. It will be close to the ground and steep inclines like driveways could cause the hitch to scrape on the ground. The Saris Glide EX, # SA774, will only fit in a Class...
    view full answer...

  • Recommended Trailer Hitch for a 2005 Toyota Matrix XR
  • Currently, there are 2 trailer hitches that will fit your 2005 Toyota Matrix XR. One Class-I # 24812 (Draw-Tite) and one Class-II # C12013 (Curt). With that said, they are all good products but I would most certainly go with the Class-II Curt hitch # C12013 because it will provide a higher tongue weight capacity of 250 pounds and Class-II will work with Class-1 and Class-2 accessories. As a result, giving you more options to choose from. With the Curt trailer hitch, if you plan on adding...
    view full answer...

  • Hitch Recommendation for a 2008 Toyota Matrix XR That Does Not Require Removing the Rear Fascia
  • You should check out the Hidden Hitch Trailer Hitch # 60965. This hitch does not require that you remove the rear fascia on the Matrix XR models for installation. I attached installation instructions for this product for you to check out. Curt does require the use of their Support Strap # 18050 with any non-trailer loads so you will want to look at it to keep within the warranty guidelines of the hitch. Since this hitch is a Class II hitch you will need to pick out a bike rack that...
    view full answer...

  • Trailer Hitch and Bike Rack Recommendations for a 2006 Toyota Matrix
  • There are Class I and II trailer hitches available for your 2006 Toyota Matrix. With a Class I hitch you are limited to just 2 bikes. With a Class II you can carry up to 4 safely. The Class II hitches available, # C12013 for XR and XRS models and # C12221 for all other models, also require the use of a stabilization strap, # 18050, for the Curt warranty requirements. Still this is the best way to go if you want to carry more than 2 bikes. Platform style racks are great because they...
    view full answer...

  • Trailer Hitch Receiver from a Toyota Matrix to Fit on a 2013 Toyota Corolla
  • There are trailer hitch receivers available for a 2013 Toyota Corolla however the Curt Class II # C12013 is not a confirmed fit. It's confirmed to fit the 2003 - 2008 Toyota Matrix XR and XRS. All of the hitches available for the Corolla are Class I, like the Draw-Tite # 24913. This hitch is rated for 2000 pounds or 200 pounds of tongue weight. It also does not require the use of a support strap with non-trailer loads, like a bike rack, like the Curt does.
    view full answer...

  • What is the Ground Clearance on Curt Trailer Hitch C12013 on a 2008 Toyota Matrix
  • I spoke with my contact at Curt and the measurement from where the hitch mounts to the frame down to the top of the receiver is 6.69 inches on Curt trailer hitch # C12013. From the top of the receiver to the bottom is 1-3/4 inches. I have included a picture a customer submitted showing the hitch installed to give you a better idea of where it will be on the vehicle. I have also included a link to the installation instructions for you to view. If you are planning on doing some towing...
    view full answer...

  • Why Would Trailer Hitch Install Bolts be Hard to Thread Into Vehicle Frame
  • It may not seem like rust or dirt but I can guarantee you there is something in the threads of the weld nut that isn't allowing the bolts to thread in. It doesn't take much to jam up the threads and prevent the bolts from threading in. I have included a few links on hitch installation tips, cleaning weld nuts, and a video on cleaning weld nuts for you.
    view full answer...

  • Trailer Hitch Fit for 2007 Toyota Matrix XR
  • All available hitches made for your 2007 Toyota Matrix XR include both Class I and Class II types in the 1-1/4-inch size. All are shown on the linked page. You'll notice all three options, parts # 24812, # C12221 and # C12013, share a very similar overall design; this is due to all of them using the same mounting points on the car's frame. This means that there will not be much if any difference between the installations. Ground clearance will not be markedly better or worse with any hitch. If...
    view full answer...

  • Difference Between Trailer Hitches C12221 & C12013 On 2007 Toyota Matrix
  • Yes, you are correct the differences are that on # C12221 the heat shield modification may be required, and lower fascia may need to be trimmed for hitch installation. On the # C12013 a heat shield modification may be required. It does not need a fascia modification, which presents an easier install on the 2007 Toyota Matrix. Also the # C12013 fits the 2003 - 2008 Toyota Matrix XR and XRS. The # C12221 fits Canadian models of the Matrix FROM 2009 - 2013 (Toyota Matrix,) and 2003...
    view full answer...

  • Installation of Curt Class II Hitch C12013 on 2005 Toyota Matrix XR
  • Curt's 1-1/4-inch Class II round tube hitch # C12013 is a confirmed fit on the AWD 2005 Toyota Matrix XR and XRS and offers no-drill installation. The hitch will bolt to the bottom of the car's frame rails using the included hardware. Heat shield trimming may be required but no other mods are necessary; no fascia trimming is required. We have not had a chance to photograph this hitch installed on your 2005 Matrix but at least the center portion of the main hitch cross tube will likely...
    view full answer...

  • Which Ball Mount Goes with Curt Trailer Hitch for a 2006 Toyota Matrix
  • The draw bar or ball mount recommended for Curt trailer hitch # C12013 is ball mount # C45521. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. Then for a pin and clip use # F-4. And for trailer wiring you can use # 118386 to add a 4-Way flat connector to the rear of your 2006 Toyota Matrix. I have linked a video review of the wiring harness for you.
    view full answer...

  • Hitch and 4 Bike Recommendation for a 2003 Toyota Matrix
  • To carry more than 2 bikes with your 2003 Toyota Matrix you will need to upgrade your hitch to a Class II hitch like the Curt Hitch part # C12013. Class I hitches are limited to only carrying 2 bikes, any more than that and the location of the additional bikes would cause excessive leverage on the hitch and could potentially damage it. The Swagman Original 4 Bike rack part # S64400 would not work for you as it is designed for 2 inch hitches. The Thule Hitching Post part # TH934XTR would...
    view full answer...

  • Recommended Cargo Carrier Compatible with 2007 Toyota Matrix XR
  • The Curt # C18153 cargo tray you referenced is only compatible with a Class III hitch with a 2 inch receiver opening. The hitches available for your Matrix XR are Class I or II that have a 1-1/4 by 1-1/4 inch receiver opening. There are adapters available that allow you to use a 2 inch accessory in a 1-1/4 inch receiver, but using them cuts the tongue weight capacity of the hitch (maximum amount of downward force that can be safely applied without damaging the hitch) by half. Also, the...
    view full answer...

  • Availability of Class III Hitch w/ 2 Inch Receiver for 2007 Toyota Matrix
  • All the hitches available for the Toyota Matrix are either Class I or II which use a 1-1/4 inch receiver tube. This being said, there's still options available that might work for you. For the best capacity, I'd recommend the Curt Class II hitch, part # C12013 which has a 250lb tongue weight capacity and a 2500lb towing capacity. For non trailer loads like bike racks and cargo carriers, the hitch warranty stipulates that a stabilizing strap like part # 18050 should be used. Most...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Dan D
Photos by:
Theodore B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Kristina F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.