Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4"

Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4"

Item # C114121

lowest price pledge


Our Price: $144.81

You Save: $90.45
Trailer Hitch

This item qualifies for Free Shipping

Shipping Weight: 28 lbs

In Stock, Ships Today
C114121 - 1-1/4 Inch Hitch Curt Trailer Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos

  • Curt
  • Class I
  • 1-1/4 Inch Hitch
  • Visible Cross Tube
  • 2000 lbs GTW
  • 200 lbs TW
  • Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Euro-style drawbar with 1-7/8" hitch ball included. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4" part number C114121 can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Reviews (1)
  • Q & A (2)
  • Videos (2)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - C114121

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Euro-style drawbar with 1-7/8" hitch ball included.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sylish, round-tube design
  • European-style drawbar with integrated hitch ball included
  • Pin and clip sold separately
  • Assembled in the USA


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Hitch ball size: 1-7/8"
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

11412 Curt Class 1 Trailer Hitch Receiver

45571 Curt Euro Mount Ball Mount with 1-7/8" Ball

Replaces 113551

C114121 Installation InstructionsInstallation Details C114121 Installation instructions

Video of Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Hitch Installation - 2016 Volkswagen Golf - Curt

Today on our 2016 VW Golf GTI, we're going to be taking a look at installing the Curt Trailer Hitch Receiver Class 1. Part number C11412. This is what it's going to look like once it's installed. You can see it's got a nice high gloss black powder coat finish. It's going to be an inch and a quarter by an inch and a quarter square tube with a half inch hitch pin hole. This is a class one hitch.

It's going to allow for two hundred pounds of tongue weight, which is our downward force, and two thousand pounds of towing weight. Now you want to make sure your vehicle is actually ready to haul that much weight by checking with you owner's manual or your manufacturer. It's got a large flat safety chain loop, both sides. It's going to be a simple bolt on design by dropping your exhaust. You're going to use existing holes with some carriage bolts and plates on the inside of the frame. The hitch does come with a hitch pin and clip, but your draw bars are going to be sold separately. One note on a current hitch, if you're going to be carrying a non-wheeled load such as a cargo carrier or a bike rack, you want to make sure you use stabilization straps.

You can see it's going to tuck up very nice along the bottom side of our fascia on the back of our vehicle giving it that sleek and stylish look. Now our first step for our installation is we're going to have to lower our exhaust system down. We're going to put a safety strap underneath to help support our exhaust as we remove the brackets in the back. We're going to have one bolt on each side that's going to hold up our exhaust system. Take a thirteen millimeter socket and lower those down. Then we can slowly lower down our exhaust.

Now we're going to have two locations where we're going to have our bolts come through on either side to hold our hitch. We're going to have a half inch carriage bolt and a block that's going to fit up inside the frame. Now before we can put our bolt through, you want to check and make sure there's not a bunch of undercoat stuck in position there where the bolt's going to come through. You just take a scraper or a file and just clean out the inside of the hole so it'll slip through a little easier. We can take our fish wire and we're going to push it through the hole, and we'll pull it down out of there, we'll place on our black and thread it on our carriage bolt. We'll press our block up into place followed by our carriage bolt.

We'll use our fish wire attached. Our next one's going to be reverse fish wire, so we're going to slide our block on. We'll thread on our carriage bolt, then we're going to insert the bolt in first followed by the block and pull it right back through the same hole. Slip it inside and just push it back, slide up our block and we'll repeat this process for the other side. Now we'll get somebody to help us, second set of hands. We're going to push our fish wires through the bolt holes and feed our hitch up through. Take our flange nut, start it onto our bolt, do the same thing to the next bolt. You want to keep pressure on this just so it doesn't slip back up inside the hole. Just round them up finger tight for now and then take a look, make sure you got your hitch all centered up. Now to tighten up our bolts, we're going to use a nineteen millimeter socket. We'll repeat that for both sides. Now we can torque down our bolts to the specifications listed in our instructions, and we'll repeat that for the other side. Our last step is going to be tighten up our safety strap, put our exhaust back up into place, and we can reinstall our bolts. We can go ahead and re-secure our exhaust hangers and remove our safety strap. That's going to complete our installation. That's going to do it for our look at and install of the Curt Trailer Hitch Receiver Class 1, part number C11412 on our 2016 VW Golf GTI.

Customer Reviews

Curt Trailer Hitch Receiver w/ Euro Drawbar - 1-7/8" Ball - Custom Fit - Class I - 1-1/4" - C114121

Average Customer Rating:  5.0 out of 5 stars   (1 Customer Reviews)

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Euro-style drawbar with 1-7/8" hitch ball included.

- C114121

The hitch arrived fast, looks great. Installation took about an hour by myself. Definitely could have used a second set of hands lifting it in place. The euro style drawbar was just the right height for my small trailer. 496265


Ask the Experts about this Curt Trailer Hitch

Do you have a question about this Trailer Hitch?

  • Trailer Hitch for 2014 Lexus RX 350 That Doesn't Require Fascia Trimming
  • We do have exactly what you need, however the Curt Trailer Hitch Receiver # C114121 that you referenced will not fit your 2014 Lexus RX 350. As you mentioned this particular hitch is designed for certain model years of the VW Golf so it won't line up with the frame on your Lexus. There are two trailer hitches available for your 2014 Lexus RX 350 (as long as you don't have the F Sport model); the Draw-Tite Class III # 75676 and the Curt Class III # C13143. The Curt hitch requires that...
    view full answer...

  • Advantage to Curt Hitch with Euro Ball Mount for 2016 Volkswagen Golf
  • I like the Euro ball mounts like what come with the part # C114121 as they are just a simpler design that doesn't require you to install a ball onto the ball mount. It's permanently fixed there so it is always ready to go. Also it's a bit less bulky so it stores a bit easier. This is a fit for your 2016 Volkswagen Golf so if you need a hitch and a ball mount that has a 1-7/8 inch ball this would be the part number you would need. For trailer wiring you then would want the # 118646...
    view full answer...

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Sarah W
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.