Product Experts Available Now!
Call 800-298-8924
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(32 reviews)
Price: $106.61
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13414
Retail:$179.25
Our Price: $106.61
You Save: $72.64
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (32)
- Q & A (11)
- Photos
- Why etrailer?
Curt Trailer Hitch - 13414
- Curt
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- No Cross Tube
- 500 lbs TW
- 7500 lbs WD GTW
- Custom Fit Hitch
- 750 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Assembled in the USA
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 7,500 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 750 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13414 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2010 Jeep Commander
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13414
Average Customer Rating: 4.9 out of 5 stars (32 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
- 13414
by: Derek B.05/09/2013
Super fast! Ordered Wednesday afternoon and had hitch installed Saturday morning with wiring harness. Thanks. 79604
- 13414
by: Jennifer11/11/2020
I ordered the hitch for my father in law midday Saturday and it was shipped out the same day. Arrived 3 days later in perfect condition. I will definitely order from etrailer.con in the future. 910834
- 13414
by: J11/08/2020
2006 Jeep Commander
909512
- 13414
by: Richard C.06/05/2020
2007 Jeep Commander
I installed this hitch on my wife's 2007 jeep commander Rocky Mountain edition.(even though the instructions said this hitch won't go on a rocky mountain edition. Perfect hitch. Had to do a few modifications. One was the cross brace from my tow hook. The nut to the bumper frame hole would not come off even with a big impact wrench. I had to use an angle grinder and cut the bolt off and I cut that brace close to the tow hook. The other side of that bolt I couldn't get out as I couldn't get the bumper cover assembly to pry back far enough even with the 6 body pins out. So I had to cut a little bit of the plastic from behind that bolt and that allowed the bolt to come out. See the pictures. Everything else went fine. I still have my tow hook. Later I will bolt some rebar up and fix the cross brace on my tow hook. But as for now I have an awesome hitch. 808648
- 13414
by: Christopher04/15/2020
2006 Jeep Grand Cherokee
It fit no problems. The finish and quality of the welds are typical curt quality, second to none. I really appreciate the install videos etrailer has with the products. 779046
- 13414
by: Kevin03/11/2020
Nice item. Easy to install 765193
- 13414
by: Dale08/18/2019
Very easy installation of both the hitch snd wiring harness. Basically one 3/4” socket, zip ties, and drilling one 3/32 hole for the grounding wire. 690837
- 13414
by: Ann06/18/2018
2006 Jeep Commander
Easy to install with the instructions provided. Has weathered well. Wouldn't buy from any other source if etrailer offers it. 523336
- 13414
by: Jeff06/08/2018
2008 Jeep Commander
Easy to install. Great service! 519467
- 13414
by: Darryl05/13/2018
2007 Jeep Commander
Quality and precision describe this best. It lined up perfectly with the factory drilled holes making it extremely easy to install. It took me about 15 minutes. T 508159
- 13414
by: Dave04/10/2018
2008 Jeep Commander
Very easy to install, 30 mins, excellent quality 494945
- 13414
by: Kenneth03/27/2018
2008 Jeep Commander
Went on my 2008 Jeep Commander as easy as pie. Had a harder time removing the plastic bumper clips than I did installing the hitch. The whole job took about 20 minutes. Great product and fast delivery. 489728
- 13414
by: Michael03/16/2018
2006 Jeep Commander
Quick fast and friendly 485400
- 13414
by: Paul02/24/2018
2010 Jeep Commander
This is my third receiver from etrailer.com and again a super easy install. The wiring kit for the flat plug was simple and easy as well. (Both were installed in 45 minutes despite it being my first time puzzling the removal of the tail light assemblies .) Ordering was simple, the part fit like a glove and it arrived the day they told me it would. What’s not to love? I don’t even shop around any more since they always have the best price anyway. If I need it I come here, period. 478629
- 13414
by: Ryan10/29/2017
Product works great! Shipping was fast. Would recommend to anybody! 447206
- 13414
by: John L.03/03/2017
2008 Jeep Commander
Very impressed with the quality of the hitch, and the ease of installation, it took a whole 15 minutes! Etrailer is a great company to deal with! 348191
- 13414
by: Shade S.02/24/2017
2007 Jeep Commander
Product is super heavy duty and is super easy to mount. 345526
- 13414
by: Steve B11/16/2016
Arrived quickly. Install was a breeze. Perfect 317249
- 13414
Ryan M - 07/05/2017
25666
by: Ryan T.07/05/2016
2010 Jeep Commander
Easy install, helpful instructions, works great towing my trailers. 268349
Comments
Just fine, very pleased.
Ryan M - 07/05/201725666
- 13414
by: I love it!06/24/2016
2008 Jeep Commander
It was shipped quicky and the quality is great! I'd recommend this product to anyone! 264473
- 13414
by: Carroll B06/11/2016
Have not had time to install yet but product looked very good. Will be installing this weekend. Excellent Customer Service. Thank you. 260247
- 13414
by: Michael05/16/2016
Great product, fast shipping, and the instructional installation videos were very helpful. I will continue to be an e-trailer customer! 250424
- 13414
John M - 10/18/2016
21572
by: John M.10/19/2015
2007 Jeep Commander
Everything was great except the packaging was torn and busted open ... other than that great response time and shipping time ... will use again ... thank you for a speedy delivery .. 230326
Comments
Still working the way it should. Satisfied
John M - 10/18/201621572
- 13414
by: Matthew L07/08/2015
2007 Jeep Commander
Literally installed in 5 minutes. Sturdy, simple, and works great. 210104
32
39
Show More Reviews
Ask the Experts about this Curt Trailer Hitch
- Distance From Hitch Tube to Bumper of Curt Hitch # 13414When we installed the Curt hitch part # 13414 on a similar Jeep Commander as your 2006 model we found that from the center of the hitch pin out to the furthest point out on the rear bumper the measurement is 3-1/2 inches. In case you were asking about the vertical distance between the hitch tube and the bumper I attached a picture to show that it fits right under that as well.
view full answer...![]()
![]()
- Recommended Trailer Hitch, Wiring, And Ball Mount For 2008 Jeep CommanderFor your 2008 Jeep Commander, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # 13414. This hitch receiver installs with just 4 bolts and washers. It has a gloss black powder coat finish over a protective base coat for superior rust resistance. For your trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408. This harness connects to your factory wiring behind each of your tail lights. If your...
view full answer... - Space Between Mounting Brackets on Curt Hitch 13414 for a 2008 Jeep Commander SportI went out to the warehouse to measure the bracket opening on Curt trailer hitch # 13414 for your 2008 Jeep Commander. It is 2-1/2 inches. Draw-Tite hitch # 75338 comes with some extra washers if there is an excessive gap between the hitch and where it attaches to the vehicle so you might consider it. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch...
view full answer...![]()
- Is There Bumper Trimming Involved to Install the Curt Hitch # 13414 on a 207 Jeep CommanderTo install the Curt Trailer Hitch # 13414 on your 2007 Jeep Commander you will not need to trim or cut any section of your bumper or add any trim bezels. I attached installation instructions for this product for you to check out also. You also would not need to reflash the PCM of your vehicle either once you installed a Tow Ready Custom Fit Vehicle Wiring # 118408. You would have to reflash the computer if you were trying to install the factory tow package wiring harness on your vehicle...
view full answer... - Trailer Hitch and Wiring for a 2008 Jeep Commander Rocky Mountain EditionDraw-Tite trailer hitch # 75338 is listed as a fit for all styles of the 2008 Jeep Commander so that would include the Rocky Mountain Edition. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to...
view full answer... - Parts Needed to Tow Trailer With 2006 Jeep CommanderWe have everything you'll need to tow a trailer with your 2006 Jeep Commander. First thing you'll need is a trailer hitch which for that the Curt # 13414 is the way to go. it has plenty of towing capacity, the highest quality powder coat finish to resist rust, and installs very easily. I attached an install video for this for you to check out as well. For trailer wiring then you'd want the part # 118408 which installs easily and is also very reliable. I attached an install video for...
view full answer... - Trailer Wiring Harness for a 2007 Jeep CommanderIf your 2007 Jeep Commander came with the factory tow package then it should have a factory 7-Way trailer connector at the back of the vehicle. You would follow this connector back to where it plugs in and that is where you would install # 118381. If there is no trailer connector on your Commander then # 118381 will not work. You would need to use # 118408 instead. I have linked the instructions and a video showing installation for you. Neither harness plugs into the back up sensor connector. I...
view full answer... - Correct Curt Trailer Hitch Receiver for a 2007 Jeep Commander The Curt Trailer Hitch Receiver part # 13414 is indeed a fit for a 2007 Jeep Commander and it's available for purchase. It offers easy bolt-on installation and it has a hidden designed for the best overall look. I have attached an install video for you below as well. It should only take around thirty minutes. If you will be towing then you'll also need the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118408 which is plug-in-play and the etrailer Ball Mount...
view full answer... - Curt Trailer Hitch Recommendation for a 2006 Jeep CommanderI have a hitch solution I can provide for you, but the Curt hitch part # 13251 that you referenced would not fit your 2006 Jeep Commander. Instead you would want the Curt hitch part # 13414. This hitch has been confirmed to fit your Commander and would work well. I attached an install video for you to check out as well.
view full answer...![]()
- Recommended Trailer Wiring and Hitch for 2007 Jeep Commander Sport Rocky Mountain Edition The Tekonsha T-One Vehicle Wiring Harness # 118408 referenced in your question is confirmed to fit your 2007 Jeep Commander Sport Rocky Mountain Edition. There is not a fit exclusion with this particular trim package. The harness will work perfectly. It will install by plugging into factory ports behind the driver and passenger side tail lights to provide you with a 4-Way connector to power a trailer's basic signal lights. I have attached an installation video that you can use for reference. If...
view full answer... - Does Curt Trailer Hitch From a 2014 Jeep Cherokee Fit a 2008 Jeep CommanderI wasn't able to find anything using that part number but I can tell you that the Curt hitches we carry for the 2014 Jeep Cherokee, parts # C13171 and # C13172, do not fit a 2008 Jeep Commander. Trailer hitches are designed for specific vehicles and those two are not desined in such a way that the same hitch will fit on them. Normally the only time a custom hitch fits more than one vehicle is when those vehicles are built on the exact same platform. The Curt trailer hitch receiver...
view full answer...
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer hitch for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer hitch information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Joshua S
Test Fit:
Nicholas E
Updated by:
Sarah W
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Product Experts Available Now!
Call 800-298-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.