1. Trailer Hitch
  2. Curt
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13336
lowest price pledge
Retail:$227.70
Our Price: $144.95
You Save: $82.75
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 32 lbs
Quantity: 
In Stock
13336 - 4000 lbs GTW Curt Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13336 can be ordered online at etrailer.com or call 800-298-8924 for expert service.
  • All Info
  • Reviews (34)
  • Q & A (4)
  • Videos (5)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - 13336

  • Curt
  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Visible Cross Tube
  • 400 lbs TW
  • 6000 lbs WD GTW
  • Custom Fit Hitch
  • 600 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Assembled in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
      • Maximum GTW when used with weight distribution: 6,000 lbs
    • Maximum tongue weight: 400 lbs
      • Maximum TW when used with weight distribution: 600 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13336 Curt Class 3 Trailer Hitch Receiver

Installation Details 13336 Installation instructions

This Product Fits The Following Vehicles




Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2005 Chevrolet Uplander

Today we are installing a Curt hitch, part number 13336 on a 2005 Chevrolet Uplander. First we are going to remove the rubber exhaust hangers and lower exhaust hanger bracket on the passengers side. All right, the next step, it says, is to remove the fascia, but due to previous wiring installation on this model it has already been removed. And the next step, it says, is to disconnect the lower compressor from the drivers side, but this model is not equipped with it. All right, the next step is to use a fish wire to run the carriage bolts and the spacers through the access slots in the frame rail, leaving the carriage bolt and spacer inside the frame rail until the hitch is raised into position. Now you repeat on the passengers side. Now, the next step is to lift the hitch into place and secure it with the bolt and washer.

Now that the hitch is up, pull the bolts through the frame rail that you just installed with the hitch fish wire. Be sure to reinstall the frame rails on the drivers side and the passengers side. Be sure before you tighten your hitch completely, when it is still a little loose, to move the hitch around to try to get it centered the best you can before you tighten everything up. Now that you have the hitch up and installed, it is time to reattach the fascia and the compressor, but in this model they have already been removed. When you are done installing the hitch, you have to torque all the bolts to its desired specifications in the instructions. All right, now that completes our installation of the Curt Hitch part number 13336 on a 2005 Chevrolet Uplander.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13336

Average Customer Rating:  5.0 out of 5 stars   (34 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- 13336
by:

Low prices great service and fast delivery. Will order from e trailer again. 145230


Comments
Still hanging on to hold things on.
RLarson - 08/08/2015

14034

- 13336
by:
2007 Pontiac Montana SV6

Installed very easily, the on-line installation video was a big help, and as others have mentioned about the fish wire for the bolts, that was a major part of how easily the hitch went on. Has been on the vehicle about a year, despite weather and road salt, no rust has shown up anywhere on the hitch. The plug-in 4-wire trailer light harness also was a breeze - the slowest part of that was deciding where in the body to secure the wires. 513178



- 13336
by:
2007 Chevrolet Uplander

The main reason I bought this was to carry the family bicycles without taking up room inside the van on our camping trips. Right after I ordered, I got an email saying it was out of stock in the main warehouse. I paid for 3 day shipping, and they still found it and got it to me in three days. While watching my three toddlers, I was still able to install it in under 45 minutes. I would highly recommend this hitch to anyone. It was extremely easy to install. 251631


Comments
Thank you for the email. I havent had a single problem with either of those two items. The hitch is on a minivan, so I dont do a whole lot of towing, but its so nice to have the capability without the expense of a truck. With the hitch being so easy to install, 1 person in less than 45 minutes, I will definitely be buying my trailer products from etrailer.
Emirson H - 01/30/2018

33923

- 13336
by:

GREAT PRODUCT THAT FITS VERY WELL. IT ARRIVED QUICKLY. THANK YOU! 653995



- 13336
by:
2004 Pontiac Montana

Extremely easy to install. Delivered one day earlier than expected. 518914



- 13336
by:
2008 Chevrolet Uplander

Was easy to install and good quality. 497321



- 13336
by:

Excellent hitch. Very easy to install will definitely buy from again. 482571



- 13336
by:
2007 Chevrolet Uplander

very smooth installation, everything fit perfectly, 100% recommendation :-) 404020



- 13336
by:
2008 Chevrolet Uplander

The hitch fit perfectly. I really appreciate that you included the fish wire with the hardware. It made the installation wonderfully easy. I watched the video that was on the page with the hitch and everything was smooth and easy. Wonderful job! I'm satisfied. And very grateful 375398



- 13336
by:
2009 Chevrolet Uplander

Good value and quality. Curt Hitch and Tekonsha harness fit perfectly. Instruction videos made things go a lot easier. Liked not having to drill frame. 331232



- 13336
by:
2006 Saturn Relay

As described. No problems putting it on. 212441



- 13336
by:
2006 Saturn Relay

I decided on this hitch receiver because of the no drill Install. It's not a hidden receiver, but to me it has a low profile and looks nice on our van. I watched the install videos and cleaned up the mounting points on my frame before receiving this item. This made the install even smoother. My friend pointed me to etrailer.com, and now I will do the same! Customer service was awesome, thank you Madison H. If I ran a business this would be the type of service I would expect my customers to receive. A+ Products A+ Service! 206967



- 13336
by:
2007 Chevrolet Uplander

I installed this hitch on a 2007 Uplander LS without the benefit of a) a lift or b) any help. It was a 'piece of cake'! My only problem was one with the vehicle - when the right side of the car was welded to the rear component, the match was not exact and the right side frame hole used by the hitch was not totally open. It took about 5 minutes to 'ream' it out and that was the extent of the problem. 201938


Comments
Great, it only took an hour or so to install-fit the vehicle perfectly.
Paul - 06/08/2016

18450

- 13336
by:
2007 Chevrolet Uplander

Easy install The third bolt was not lined up flat but acouple washers did the job. Great item 195260



- 13336
by:
2006 Chevrolet Uplander

Very easy install on a 2006 Uplander. Worked great for the rear hitch bike rack I have. 156164



- 13336
by:

hitch was promply shipped and in good condition when it arrived The instructions were well written and easy to follow hitch fit with no problems and hardware provided made installe a breeze would recomend curt hitch products and would buy again 153750



- 13336
by:

Installation was simple and this is a quality product. I am using for our StarCraft Pop-Up camper and I have been very satisified with this vendor; I highly recomend this product and vendor. 149574



- 13336
by:
2006 Buick Terraza

Easy install no drilling....nice hitch 146898



- 13336
by:
2005 Buick Terraza

Good heavy quality hitch and installed just as the instructions directed. It did take me a little longer due to the compressor in my van but for a 70 year old with a bad shoulder two hours is not too bad. 133651



- 13336
by:

It's about time someone put some thought into ease of installation during the product development. The only way it would have been easier to install is if the hitch installed itself! Very pleased with the results. 129401



- 13336
by:

Great product.....low price and even faster delivery than expected. You can't get any better than that. You get a 5 star rating. 124580



- 13336
by:
2007 Chevrolet Uplander

It was easy to put on, had to have my wife help hold one side up so I can put the first bolt in. This is the second hitch I got from here and when I get another car will get another hitch. 99967



- 13336
by:

The hitch arrived quickly. The hitch is very high quality. 87188


Comments
No problems. I have pulled trailers and used it to haul bikes. It is a heavy duty hitch.
Spencer - 12/31/2014

8321

- 13336
by:
2005 Saturn Relay

Great product. Installed on a 2005 Saturn Relay. Very solid construction. No welding required, 8 bolt mounts hold this receiver firmly in place, all using existing factory locations. 2 additional mounts on the side of the receiver for the exhaust mount make it easy for later exhaust work without unbolting the hitch receiver. Delivery was free at the time of my purchase, but I opted for 3-5 day UPS delivery. This and the associated hitch and ball were shipped within the same business day and arrived 2 days later, for a total of 3 business days. I do live near the origin site, so expect longer shipping depending on your location. Available instructions were sufficient, but the online videos available on the etrailer site were a pleasant addition. Thank you, etrailer.com. Great products, competitive pricing, fast order processing and shipping. Will recommend you to others. 51132



- 13336
by:

Easy install Dosnt sit far back like my other one 44381


25
34
Show More Reviews

Ask the Experts about this Curt Trailer Hitch

  • Trailer Hitch, Ball Mount, Hitch Ball, and Trailer Wiring for a 2009 Chevy Uplander
    I spoke with my contact at Curt and she stated that, technically, Chevy stopped making an Uplander for the US market in 2008 so there is no 2009 model. They did continue to make them for the Canadian market which is why the Tech Tip states the hitch is for that market. However, she stated that as long as your 2009 Uplander has the 121 inch wheelbase, the Curt Hitch, # 13336 will fit. If yours does not have a 121 inch wheelbase, or you are not certain, she stated you could use Curt Hitch...
    view full answer...
  • How to Measure for Rise or Drop Needed to Tow Trailer Level with 2006 Saturn Relay
    to measure for the correct rise or drop needed to tow a trailer level the hitch will have to first be installed. When it is make sure your 2006 Saturn Relay and trailer are on level ground. On the vehicle, measure from the ground up to the top of the receiver opening. On the trailer, make sure that it is level and measure from the ground up to the bottom of the coupler. If the vehicle is higher the difference between the 2 measurements is the amount of drop you will need. If the trailer...
    view full answer...
  • Is the Full Size Spare Replaced Under the 2006 Pontiac Montana SV6 After # 13336 Hitch Installation
    Yes, the full size spare will need to be lowered to provide access to the hitch attachment points, but will fit back into its original location after installation of the Curt Class III Trailer Hitch, item # 13336. You will need to Lower the spare tire from its storage location. It will be put back in place after hitch is installed. I have included a link to the instructions for this hitch for you to review. We also have a installation video showing the installation of this hitch for...
    view full answer...
  • Hitch, Wiring and Ball Mount Kit for 2007 Chevrolet Uplander Towing Multiple Trailers
    If your 2007 Chevrolet Uplander has the 121-inch wheel base then the easiest hitch install will come with the Curt 2-inch Class III hitch # 13336 since this option is a no-drill install. This hitch and the 1-1/4-inch Curt # C12336 are the only such no-drill hitches offered. If your Uplander does not have this 121-inch wheel base then the option I suggest is the Draw-Tite # 75278 which does require drilling but costs less than others. Written instructions for all referenced hitches are...
    view full answer...

Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Video Edited:
Joshua S
Written by:
Lindsey S
Expert Research:
Patrick B
Expert Research:
Michael H
Test Fit:
Brent H
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.