summer hauling headquarters

Price: $72.23

In Stock
15 Dollar Visa Gift Card Mail In Rebate With Purchase of Select Curt Class 1-5 Rear Mount Hitches

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13333

lowest price pledge

Retail:$111.21

Our Price: $72.23

$57.23 after $15.00 Mail-In Rebate
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping

Shipping Weight: 14 lbs

Quantity: 

In Stock
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

spin image icon
curt trailer hitch 10000 lbs wd gtw 1000 tw receiver - custom fit class iii 2 inch
curt trailer hitch class iii 1000 lbs wd tw 13333
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch

In Use/Installed

2013 dodge ram pickup trailer hitch curt 10000 lbs wd gtw 1000 tw 13333
2013 dodge ram pickup trailer hitch curt class iii 10000 lbs wd gtw in use
2013 dodge ram pickup trailer hitch curt class iii 1000 lbs wd tw 13333
2013 dodge ram pickup trailer hitch curt custom fit 10000 lbs wd gtw 13333
2013 dodge ram pickup trailer hitch curt custom fit 1000 lbs wd tw in use
2013 dodge ram pickup trailer hitch curt custom fit 10000 lbs wd gtw receiver - class iii 2 inch
2013 dodge ram pickup trailer hitch curt class iii 10000 lbs wd gtw 13333
2013 dodge ram pickup trailer hitch curt custom fit 1000 lbs wd tw receiver - class iii 2 inch
2013 dodge ram pickup trailer hitch curt custom fit class iii in use

Customer Photos

curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 1000 lbs wd tw in use
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 1000 lbs wd tw in use
curt trailer hitch custom fit 1000 lbs wd tw in use
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch class iii 10000 lbs wd gtw 13333
curt trailer hitch class iii 10000 lbs wd gtw in use
curt trailer hitch custom fit 10000 lbs wd gtw 13333
curt trailer hitch custom fit 10000 lbs wd gtw 13333

  • Curt
  • Class III
  • 2 Inch Hitch
  • 6000 lbs GTW
  • 600 lbs TW
  • Custom Fit Hitch
  • No Cross Tube
  • 10000 lbs WD GTW
  • 1000 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13333 can be ordered online at etrailer.com or call 800-298-8924 for expert service.


  • All Info
  • Reviews (491)
  • Q & A (56)
  • Videos (13)
  • Photos
  • Used (1)
  • Why etrailer?

Curt Trailer Hitch - 13333

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 10,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,000 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13333 Curt Class 3 Trailer Hitch Receiver



13333 Installation InstructionsInstallation Details 13333 Installation instructions

This Product Fits The Following Vehicles

2004 - 2014 Dodge Ram Pickup 1500 - without factory hitch

2003 - 2003 Dodge Ram Pickup 1500 - without factory hitch - built After 11/1/02

2003 - 2013 Dodge Ram Pickup 2500 and 3500 - without factory hitch

2010 - 2013 Ram 3500 Pickup without factory hitch

2010 - 2018 Ram 1500 without factory hitch

2010 - 2013 Ram 2500 without factory hitch



Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Trailer Hitch 13333 Review

Today we are going to review Part Number 13333. This is the Curt Class 3, 2 Inch Trailer Receiver. This is a custom fit hitch designed specifically to fit your vehicle. It will fit the Dodge Ram 1500, the 2500 HD, and 3500 HD trucks without the factory hitch starting in 2003. Now what I would recommend on any custom fit part is to go to our website, use our fit guide, put in your year and model vehicle and it will show you if this will work for your application. Now when this is built, they use precision robotic welding to help maximize the strength of this hitch and it improves the fit of it. It is a bolt on installation.

There is no welding required. It comes with the complete hardware kit shown here and a set of installation instructions also. Basically includes the two carriage bolts, the two hex flange nuts, the two spacers, the two fish wires, this one large flat head socket cap screw and the detailed instructions. Now on the hitch itself, you can see has a nice gloss black powder coat finish over a protective base coat. This will offer superior rust resistant. This does require a ball mount and a pin and clip to hold into place.

Those two items would be sold separately. We sell them separately on our website and they are usually on this product page as related products. This part is made in the USA. Now a few specs on this. The receiver opening is 2 inches by 2 inches. The rating again on this again is a Class 3, so that would mean the maximum gross trailer weight capacity on this is 6000 lbs, maximum tongue weight capacity is 600 lbs.

Now if you do use this with weight distribution, it would increase those numbers to maximum gross trailer weight capacity to 10,000 lbs and the maximum tongue weight capacity to 1000 lbs. Basically, when you go to install this and if you will notice, it also has the safety chain holes to hook your safety chains to. Then you will see the threaded hole right in the top here. When you go to install this basically you will use the fish wire and again, these instructions will show you all this. You run your two carriage bolts with the spacers through your bumper support tube in the back and they will come through here and they will allow you to bolt this hitch on to your bumper support tube and you will put the flange nuts and tighten it down to correct torque specs. Then what you will also do is there is a bracket that is on the top of the bumper support tube that will go up underneath the bumper and you access the hole right here on this hitch by removing the cover that is on the hole in the bumper where the trailer ball hole goes.

Then you will just take this large bolt, tighten this down to the bracket also on the bumper support tube. Then with all that done, you will be all ready to go. That should do it for the review on Part Number 13333, the Curt Class 3, 2 Inch Trailer Receiver.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13333

Average Customer Rating:  4.9 out of 5 stars   (491 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- 13333

by:

2008 Dodge Ram 1500


First let me say what a well made quality product this is. I have a 2008 Dodge Ram 1500 minus all of the other things that happened to me it really only did take about 20 minutes. I had issues getting my spare out of the way and used a box wrench instead. I also had the misfortune of loosing the plate and screw in my bumper tube. So let me offer you some advice. If you have a tube that is open at both ends be thankful. I attached the two wires provided together with a little electrical tape and a nail where the two wires were joined to make it rigid. I fished the lines through the entire tube from end to end and gently pulled the other plate through pulling the dropped one out. This took awhile and a little cussing on the way. I have big fingers so I recommend once you have the bolt sticking out through the tube and trailer hitch I used the fishing wire halfway around the top of the bolt and put the wire flush against the hitch at the farthest thread back and held the bolt in place that way while I thread on the nut it wouldn't drop back in. Because hearing that klinck sound when it falls isn't pleasant and leads to that moment of oh crap. I did call the manufacturer and one of the service people called me back just as I was fishing it out. They recommended the same thing. Hope this helps anyone that has the same problem I did and we are off to Glacier National Park and many other destinations. 16517



- 13333

by:


Shipped fast. Etrailer support was excellent, there was a concern with my order and it didn't ship on time so they refunded my extra payment for 2 day shipping and still shipped it 2 day. Installation was easy, I didn't even drop the spare all the way to get to the bolt holes through the rear cross bar. Fitment with the spare and in hitch in place is tight. The top bolt barely handled the required torque. Installation was a breeze. Can't wait to use it this weekend. 213773



- 13333

by:

2015 Ram 1500


Went on without a "hitch"! But seriously, the hitch went on without a problem. The first one I ordered was welded completely crooked. I was p*ssed! I took pictures and sent them off to customer service. There is no doubt about etrailer's Customer Service Team. They are second to none. My replacement hitch was on its way to me before I even had the crooked one in the mail. The hitch, bolts, nuts and those wires that allow you to pull the bolts and retainer plates through the frame, all quality parts and easily went on. They have instructions and a great video of how to install it on my 2015 Ram 1500. Thank You etrailer for a smooth and pleasant transaction. 306495


Comments

Ive used it quite a few times. I towed one of my cars to have a new transmission installed, a rented mini excavator twice during the 2017 summer. It is definitely doing its job pulling its weight.

Frank M - 10/14/2017

29247

- 13333

by:

2011 Dodge Ram 1500


Super easy to install. I thought fishing wires into the frame might be a pain, but the provided tool with a spring-looking thing on the end which threads the bolts worked like a charm. The only problem I had was finding a half inch hex socket, I made a similar metric size from an auto parts store work. Fits discretely and with a low profile look on my 2011 ram 1500. 111192


Comments

This is a great product. I bought it a year ago, installed it in less than an hour and havent had any problems with it. The coolest thing about the hitch is the ease of installation. Just bolting onto a crossmember of the dram behind the bumper its just a few bolts and done easy easy. I would highly recommend this product.

tom - 12/26/2014

8202

- 13333

by:


Here are 2 pictures with my new hitch installed, that I received from you. Thank you so much 410450



- 13333

by:


My shipping was upgraded at no extra cost to me. I received the product in the pm of June 8 and installed it June 9 in less that 25 minutes, excluding spare tire removal. Removing the spare made the job much simpler. The receiver has a great finish and the fit was perfect. 16566



- 13333

by:


After reading up on your hitch and it's installation, I was convinced I could do this myself ~ except for not being able to tighten things adequately. [I'm all of 71 yrs young.] Owner of the truck, hubs, Papa Gene at 86 yrs young, has no business groveling on the hard ground on his bad back to do the job ! As he figured [incorrectly] that the spare would have to come off from the undercarriage, he elected to have a more able, [disabled] neighbor do the job. As your instructions indicated, the job took all of 30 minutes, and no, the spare stayed in place. Hubs is ready now, to haul cedar logs to be milled for return so that he may build more furniture! 360519



- 13333

by:


Wow. These folks make sure their communication is there. They emailed me when the product was shipped and when I received it. It was the Curt Class III 2" Trailer Hitch. It was so simple to install, I couldn't believe it. It took 20 minuets to install. It would have only took 15 minuets if I had went exactly by the instructions. But I was skeptical about the fish wire & used 1 round of electrical tape around the fish wire holding the bolt in place. It took an extra 5 minuets to remove the tape I put on for the fish designed for this job to work. I didn't think this flimzy wire would do it. Boy was I wrong. So on the other side I went exactly by the instructions and did not add the tape. It went in & in place like the instructions said. So easy. My advise is to go exactly by the instructions! If it doesn't tell you to add to don't! These folks know exactly how it should go. So if you go exactly by the instructions, you will walk away in 15 with hitch installed! I will recommend this hitch to everyone I know that needs one. 340994



- 13333

by:

Dodge Ram 1500


Fast shipping. Very well built and easy to install. Had the new hitch on in less than 15 minutes on my Dodge Ram 1500 ST and it looks great. 226912


Comments

After a year and towing a boat this hitch is still like new. Not a single problem with it coming loose or showing any sign of wear. Am as happy today as I was the day I installed it.

Mitch V - 09/21/2016

21096

- 13333

by:


Installation photo 409910



- 13333

by:

Dodge Ram 1500


Great product and easy to install it took me and my son about 15 mins to install this on my Dodge Ram 1500. Looks great and can't wait to hook the boat up and try this out. I have enclosed some pictures. 118032



- 13333

by:


The hitch is a perfect fit. Nobody can beat your price. Found you guys thru goggle. If I need anything else you all we be the first to check out. I have let the word out on you guys prices. Thanks I saved my self some money at half price. 171039


Comments

Great ! No Problem . I put it to the test and it held up. Thanks

David L - 01/23/2016

16536

- 13333

by:


Installation was fairly easy, most difficult part was removal of spare tire to gain access to install the hitch. The cover on top of the bumper barely fit to cover top bolt. I hope it stays, I may put some glue on it to keep from it falling off. Hitch appears to be of high quality and fits perfect. I saved a lot of money doing the labor myself. 184347


Comments

I replaced the bent one after a traffic accident, dont have anything to tow, it seems to be high of same high quality as the original.

Bill A - 04/11/2016

17445

- 13333

by:

2003 Dodge Ram Pickup


I ordered this for a 2003 Dodge Ram 1500 I recently acquired. Very well made! It came complete with all hardware and instructions. I had no problem following the instructions. It took longer to get ready to install the hitch than it did to install it; just about 15 minutes. I also ordered wiring kit C57186 which was perfect for my application. I'll be towing a Jay Feather hybrid with Tekonsha Prodigy RF wireless brake controller and this worked out perfectly. Thanks to Etrailer for making this so easy! 502950



- 13333

by:


Your product arrived today. After I gathered the correct tools, I had it installed in about 20 minutes. Great install, nice looking product and a real answer for a receiver hitch for my 1500 RAM. BTW, the pull-wire is ingenious and work just as shown. Thanks for a really good product. 214972


Comments

Still working great. Pull with it regularly and havent had any problem whatsoever. Great Product!

Dale S - 07/27/2016

19676

- 13333

by:

2015 Dodge ram


Installed on my 2015 Dodge Ram 1500. I think I spent more time trying to find the 1/2 hex and lowering the spare to give me some room than I did installing the receiver. Ordered on a Sunday, received on Tuesday. Fantastic product, good price, easy installation, I would highly recommend. 475158



- 13333

by:

2013 Dodge Ram


Awesome. . Perfect fit for my 2013 Ram..Easy to install , especially with all the hardware that's included. I had read previous reviews and noticed a 1/2 inch hex key was needed so I purchased that before the hitch arrived that way I was ready to install. From the time I opened box , dropped spare tire,install and tighten the hitch to jacking back up the spare and being tow ready in 30 min. Thanks etrailer for a great product at a great price.. I am a satisfied customer. 119745



- 13333

by:


Great! Easy installation and hauled my first load on it today! Feat product! 175553


Comments

It is great! Hauling is no problem using my 14ft trailer. Excellent product.

Brandon S - 03/04/2016

17001

- 13333

by:


Fit like a glove, took about 20 minutes. Thanks! 12529



- 13333

by:


Great quality product. Service and attention to detail is why I continue to buy from etrailer. Just something that catches my attention is the printing inside the lid of the shipping carton. It sounds simple but they have contact information before you see your product on how to resolve issues and little ad that states "Bottom of the box is not the end of your transaction with etrailer" or something like that they want to continue to service you even after the sale. Deliver was extremely fast and received an email letting me know it was delivered. Ordered it late in the day on 12/31 and was not expecting it to be on my door step that fast due to holiday. I have purchased several items from etrailer in the past and I will continue for these three simple reasons: quality, service and price. 234798



- 13333

by:


Very easy to install. Seems very rugged and well made. 134306


Comments

It looks and works great. It was a great purchase

Mickey B - 06/04/2015

12323

- 13333

by:

2011 Ram 1500


Was looking for a receiver to fit my 2011 Ram crew cab, E-Trailer had one for a decent price, with a flush under bumper model. Just as advertised, it fit perfect. Very easy to install.(15-20 mins.) Made a great choice in doing business with E-trailer. Delivery was sooner than expected, and the price was good for me. Thanks E-Trailer 308395



- 13333

by:


Solid product, excellent price This hitch costs much less than the factory Dodge hitch yet it has just as good a build quality and for all intents and purposes, is an identical product. Installation is very straightforward and the directions are clear but there are two small things you should be aware of. 1) You'll need a 1/2" hex bit which you can find at your local Kragen/Napa/etc for a few dollars, and 2) You are instructed to torque to 200lbs. A torque wrench i that range is a really expensive specialty item, so what you can otherwise do is get it on real tight with a breaker bar, then go another 1/8th turn, which should be pretty close. All in all, great product and great service from eTrailer. 3652



- 13333

by:

Jeep Liberty


I received a quote from a local truck dealer to install this for $220 and stated it would take a "couple of hours!" I watched the video on-line and decided to order the part. It arrived in a couple of days and I had it installed in 22 mintues! (4 - 6 mins were to lower/raise the spare tire!) I used the hitch this past weekend to haul my bass boat! Ordering a reciever hitch for my wife's Jeep Liberty now (Local dealer quote was $550) NOTE: Make sure you have a 1/2" hex socket for the bumper bolt. 85752



- 13333

by:


Unbelievably easy to install (took me less than 15 minutes). Great quality product for a great price. 365151


Comments

This hitch has been great. In the past year, I have moved out of an apartment and into a house. I have used this hitch constantly to pull trailers full of furniture, snowmobiles, pop up campers, lawn equipment... you name it! The hitch is still sturdy and gives me piece of mind while pulling a trailer.

David B - 04/10/2018

37130

- 13333

by:


From a man who does not consider himself a handyman, this was a super easy install. The directions were clear and things went together very easily. Etrailer was fantastic. I ordered the product with standard shipping on a Friday. Within an hour I had an email from George J telling me that the product was already shipped. I had the hitch in hand by Tuesday at no extra cost to me!! The only negative I would say is the need for a 1/2 inch hex bit for one of the 3 fasteners. It took me longer to find one of those than the entire installation. IF the hex bit was replaced with another fastener it would have been completely installed in less than 20 minutes. 295144



- 13333

by:


Got the new hitch installed today, and if I hadn't had a little trouble with the first bolt and plate that you have to feed from the end of the support tube, I would have finished the installation in 15 minutes. Wrestling with the plate added an additional 5 minutes, and I had to crawl out from under the truck twice to get something I needed. The installation was easier than I expected, and the hitch not only looks good, but it is super sturdy as well. I am very pleased with my purchase, and would highly etrailer.com to anyone looking to purchase any towing products. Shipping was fast, and I received emails keeping me informed of the status. Thanks etrailer. 6372



- 13333

by:


Easy installation, sturdy, and fits right up against the bumper 233211


Comments

Works as expected. Little bit of rust from sliding the ball mount in and out but that is expected

Cody T - 12/05/2016

21991

- 13333

by:

Dodge Ram


I was quoted over 400.00 to install a tow hitch for my Dodge Ram from a local store. I thought it seemed a little unreasonable since they told me there would be now drilling needed. So I decided to check online fort options. I found your tow hitch and ordered it. It came earlier then expected so I was thrilled. I checked out a video on YouTube and Viola! I installed it in less then 30 mins. The only tool I had to buy was that 1/2 hex thing so plan ahead. So ladies don't even bother to get your hubby to do it , put your dirty clothes on and get to it. I packed and went camping that same day towing my pop up camper. Thanks E Trailer?? 32613



- 13333

by:

2011 Dodge Ram Pickup


This hitch was for my son's new "used" Dodge Ram 4 wheel drive pickup purchased. along with a drop draw bar and ball. The online instructions even showed how to select the correct draw bar drop for the specific hitch/trunk combination based on the trailer coupler height from the ground with the trailer level. The installation of the 2 bolts and plates inside the bumper support tube using the wires supplied along with on line video and a little care went very well. The only issue was tightening the 13 MM recess 13 MM hex bolt through the top of the bumper into the hitch. I had to borrow a 3/4" drive socket from a garage. 504092



- 13333

by:


Received this in a short amount of time. Had it installed in 15 minutes! Seems like a perfect fit for what I need! 211600


Comments

Great!

Gail H - 07/13/2016

19352

- 13333

by:


Great price great quality product. 123676


Comments

Still strong no issues after one year. Very happy with purchase.

Andrew G - 04/15/2015

10839

- 13333

by:


The delivery was prompt and efficient-the directions were good and clear. Ollie 148472


Comments

perfect

ollan c - 08/25/2015

14535

- 13333

by:


This is a no nonsense cost effective receiver so it was my choice. Installation was much faster than advertised. Instructions were simple & clear with visuals. One helpful hint that could be added to the instructions would be to secure the carriage bolt to the rectangular washer with a piece of mask tape to insure that the square of the carriage bolt stays in place on the washer as it is fed through the hitch tube on the vehicle. Took me less than 10 minutes to actually install the hitch. I commend etrailer for excellent service, product value, great advice and prompt shipping. 443787



- 13333

by:


Shipped promptly and very easy to put on once I got a hex head socket to put the bolt thru the bumper. The bolts were very easy to pull thru the support with the wires supplied. I used some needle nose pliers to hold the bolt while I removed the wire and started the nut on the bolt. I think Etrailer should make it known that a 1/2 inch hex head wrench (socket) is required. They are not hard to find. Went to Tractor Supply, Lowes, Auto Zone, John Deere, Farm Supply store and no one had a 1/2. Finally found one at Napa Auto Parts. Excellent product and am very satisfied. 182802



- 13333

by:


eTrailer your rock! I mean it! I have purchased three hitches for various model vehicles for well over 10 years. Never a disappointment! ever! After a Uhaul bad experience in California when a new hitch was install incorrectly and cause damages to car. Now I can do more every order. My neighbors also purchase from you and I highly recommend eTrailer.com for the easy and details of installation. As a Army Vet, Truly satisfied! Thank you for making it very easy to select, video, and exact fit! I recommend everyone to purchase your first accessories from eTrailer.com! 351688


Comments

Excellent! Works great! Im ordering an older model 1970 custom van hitch this year after beefing up transmission. Cant wait!

Wally - 03/14/2018

35895

- 13333

by:

2018 Ram 1500


Bought this at a great price for my 18 Ram from etrailer. So simple to install. It took longer to lower my spare tire than to install this hitch. Highly recommend. 488756



- 13333

by:

2018 Ram 1500


Etrailer, made this hitch super easy to order. Shipping was fast and complete. Packaging was very minimal. Definitely potential for damages. However, mine was perfect. I ate dinner and decided to tackle the 30min (so I’m told job). I completed it in 20. I did have all the proper tools ready to go. I also watched a short YouTube in the install. With or without the video. It was easy. Not sure how to get the proper torque on the bolts as they are extremely high. All in all very easy, looks factory, and can’t wait to tow something. I would buy this item again. 523731



- 13333

by:


I am totally impressed with your entire approach to internet business! With all of the "horror stories" you read about - - it is cause for concern whenever you punch the "confirm" button on an order. The product (a Curt Hitch) arrived faster that I expected, packaged appropriately and complete with everything needed to install. The "fit" on my truck was perfect and it looks great. The follow up effort from your staff to ensure that I received what I had ordered was beyond exceptional!!! THANK YOU! I will remember you when needed again. 60482



- 13333

by:


Surprised beyond belief, this hitch was perfectly matched, easy to install and look great. I spent approximately 20 to 30 minutes from opening the box to complete. Hardest part was fishing the bolts down the tubes, but after the first one the second one went like a charm. Great product will definitely buy from here again. 105002



- 13333

by:


Everything in package was quality product. Skeptical about pulling the plate & bolt with the provided wire, I taped a string to both plate & bolt before pulling. Everything work fine except for the fact that I had to purchase a 1/2" hex for the top bolt. I borrowed a torque wrench from Auto Zone to torque everything down. It took about 30-40 minutes to install once I acquired all necessary tools & that includes the dropping of the spare. WATCH THE PROVIDED VIDEO A COUPLE OF TIMES BEFORE YOU START, IT WILL BE WORTH IT!!! 423685



- 13333

by:


Very pleased with this part. It came in a timely manner, and the installation was extremely easy. 262340



- 13333

by:


I read the reviews of how easy it was to install and I was a little skeptical. But I had this thing installed in minutes. It was the easiest install of a hitch I have ever done. I saved the wire leads that were used to fish the bolts through the tube in case I need to use them on something else. I am very impressed with the quality of the hitch also. Ordering from eTrailer was a breeze and I had the parts in two days. I highly recommend them, you won't be sorry. I give them 6 out of 5 stars! 312341



- 13333

by:


Installed this hitch in 20 minutes. It's a perfect fit and as easy as they say. Thanks etrailer. 116086



- 13333

by:

2010 Ram 1500


Purchased to fit my 2010 Dodge Ram 1500 Quadcab SLT. Original receiver was removed by vehicles first owner, so a replacement was in order. It only took about 30 min to install. It could have been much shorter time but the bumper style that was on the vehicle did not allow for a straight bolt up fit. I had to loosen the bumper slightly to complete the install, but that was a minor issue that only added a few extra minutes. The fishing cables definetly make install easy. 325344


Comments

Works as it should. Finish has held up to a season of use.

Alton S - 12/15/2017

31934

- 13333

by:

2004 Dodge Ram


I just finished installing the new receiver hitch on my 04 Dodge Ram. It went on fairly easily. Fishing the bolts through the existing hitch tube was allot easier than I thought it would be, just make sure it doesnt fall back into the tube after you take the fish wire off or youll play hell getting it back out of there. I havent tried the hitch out yet but it seems to be very well made and heavy duty. I dont think Ill have any problem pulling our little 16 ft camper now. 76603



- 13333

by:

2011 Ram 1500 truck


This receiver hitch is perfect; well designed and expertly made with a top quality finish. It takes 20 minutes or less to install, everything is included. Bolted-it-up to a 2011 Ram 1500 R/T with no modifications to truck or receiver needed and it looks great. 9680



- 13333

by:

2010 Dodge Ram 1500


I bought the Curt Trailer Hitch Receiver #13333 for my 2010 Dodge Ram 1500 with 4-wheel drive. When I opened the box it appeared to be good quality and rigid design. All of the parts were in the box. Installation took only 10 minutes. It took me longer to remove my spare tire than it did to mount the hitch receiver. Everything worked exactly as shown in the video. I would highly recommend this hitch for high quality and ease of installation. 35175



- 13333

by:


Everything about shopping at etrailer.com was amazing! From the description of the hitch to the instructional videos and product reviews. Price was about the same as other sites but the hitch from etrailer has a better mounting bolt allowing the bumper cover to snap back on while Amazon's doesn't, even though it's the same Curt hitch the hardware is better. Plus the shipment arrived earlier than I expected overall super satisfied!! 525184



- 13333

by:

2012 Dodge Ram 1500


Received product sooner than expected. Fish wires worked great. Looks like factory install on 2012 Ram 1500. It is easier to torque frame bolts with spare dropped. I installed by myself (I used to be a full time mechanic). I don't know what one of the other reviewers had done, but my factory plastic cap popped right back in the bumper. Overall, very easy install and looks great on the back of my truck. Thanks for a great product. 42501


81
522
Show More Reviews

Ask the Experts about this Curt Trailer Hitch


  • Class V Trailer Hitch for 2015 Dodge Ram 1500 with Factory Hitch
  • The add-on hitch receiver assembly we offer for 2015 Dodge Ram 1500 without Factory Hitch, Curt # 13333, is only rated as a Class III hitch. For the 2015 Ram 1500 that came WITH the factory hitch we do offer a complete Class IV hitch from TorkLift, their part # TLD1106H. The linked installation instructions include step by step directions and photos. Please note that you still need to add the factory receiver to the truck before you can install the Class IV TorkLift hitch. I checked...
    view full answer...

  • Trailer Hitch and Custom Trailer Wiring for a 2008 Dodge Ram Quad Cab 1500 Big Horn
  • The 7-Way and 4-Way Replacement Connector, # 42145, is the correct harness for your 2008 Dodge Ram if you already have or had a factory 7-Way. One end mounts to the rear of the vehicle, there might even be a knock out on the bumper that can be removed. The other end plugs into the vehicle wiring. Your truck should have a plug behind the bumper, near the center. It will plug into the square connector of the harness. If the truck does not already have any connectors, you will need to start...
    view full answer...

  • Torque Rating for the Curt Hitch part # 13333
  • The torque rating for the Curt Hitch part # 13333 is listed in the installation instructions I attached to the right. I also attached an install video for you to check out as well.
    view full answer...

  • Higher Capacity Trailer Hitch for a 2017 Ram 1500 with Factory Installed Hitch
  • For your 2017 Ram 1500 with factory trailer hitch we do have a fantastic beefier options for you. it is the TorkLift SuperHitch Hero # TLD1106H. It features dual 2 inch receivers and is rated for 8,000 pounds gross trailer weight and 800 pounds tongue weight (15,000 and 1,500 when used with weight distribution). But keep in mind you are limited to the towing capacity of the truck. Also please note this hitch only fits short bed models and not long, 8 foot bed models.
    view full answer...

  • Recommended Trailer Hitch To Tow 2 Horse Trailer with 2004 Dodge Ram Truck
  • With the trailer load you will be carrying, using the Curt Trailer Hitch Receiver, part # 13333, would put you near or slightly over the tongue weight capacity of the hitch, which is 600 lbs. If you were to use a weight distribution system when carrying your horse trailer you would be ok to use the Curt # 13333 Hitch. Tongue weight is calculated to be about 10 to 15 percent of the Gross Trailer Weight. I would recommend using the Curt Class V Trailer Hitch, part # C15409. This hitch...
    view full answer...

  • Correct Ball Mount Height for 2011 Dodge Ram 1500 4x4 With Curt Class III Receiver # 13333
  • The ball mount needed will depend on the coupler height of your trailer when it is level. The difference in height between your receiver and the trailer coupler will dictate which particular ball mount is needed. You will also want to choose the appropriately sized trailer ball and a ball mount that has a capacity greater than the weight of the trailer you are planning on towing. If you will be towing different trailers that have various heights, an adjustable ball mount might be the...
    view full answer...

  • Replacement Installation Hardware for Curt Trailer Hitch 13333 for a 2014 Ram 1500 Express
  • For replacement mounting hardware for Curt trailer hitch # 13333 you will need replacement hardware kit # RHK. On the RHK page you will see a box to enter the hitch number and a box to choose the manufacturer of the hitch. Enter the information, click add to cart, and our team will assemble the correct kit. I have also linked the installation instructions and a video showing installation on a 2013 Ram.
    view full answer...

  • Difference Between Curt # 13333 And Curt # 13374 For 2014 Dodge Ram 1500 Crew Cab
  • I spoke with my contact at Curt about your 2014 Dodge Ram 1500. They said it would depend on how you are planning on using the hitch you choose. If you are planning on towing something that would require a weight distribution system when towing, you will want the part # 13374. Weight distribution is needed if your trailer weight is more than 50 percent of your truck weight, or if the rear of your truck sags when the trailer is hooked up, or you experience trailer sway. I have attached...
    view full answer...

  • Recommended Hitch Receiver Installation or Replacement for 2011 Ram 1500
  • The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13333 is the hitch you have as I looked it up from your email address. There is not a spacer needed and this hitch is rated for 1000 lbs tongue weight when using weight distribution. It sounds like you either have too heavy a trailer for this hitch or you need to re-torque the bolts on your hitch to spec. I've attached the installation details as well as a video to assist. If you determine you want a stronger hitch...
    view full answer...

  • Compatibility of Curt Class IV with Spare Tire of 2013 Ram 1500 ST
  • The rearmost frame cross member or bumper beam of your Ram is essentially the OEM hitch minus the receiver opening. The OEM hitch can be completed so to speak using the Curt # 13333 which would provide a capacity of 6,000 lb gross towing/ 600 lb tongue weight. In order to achieve a higher tongue weight capacity (10,000 GTW/1,00TW), you would need to use the Curt Class IV # 14374 that uses the frame members for its two forward-most attachment points and the bumper beam for its rear...
    view full answer...

  • Recommendation for a Trailer Hitch that Bolts to Bumper Support on a 2009 Dodge Ram 1500
  • You are correct, your 2009 Dodge Ram 1500 does have a bumper support at the back that attaches to each frame rail with a support in the center that rests under the step bumper so you can place a hitch ball. The Curt Trailer Hitch, # 13333, that you have referenced attaches to the bumper support and uses the ball hole as an attachment point also, so it is compatible with your truck. The hitch can be used with weight distribution. I have included a link to the installation details for...
    view full answer...

  • Trailer Hitch Recommendation for a 2004 Dodge Ram Pickup with a Lower Bumper Trim Piece
  • The Curt Class III Trailer Hitch, # 13333, is designed to bolt to the round bumper support bar just behind the bumper. Once installed, the receiver of the hitch will sit directly below the step in your rear bumper. If the lower trim piece covers the underside of the rear bumper and the round bumper support (which appears to be the case according to your photo), then you could install the hitch, but you would need to cut the bumper trim piece for the hitch to fit. If you do not want...
    view full answer...

  • Best Class III Trailer Hitch for a 2014 Ram 1500 that Allows Bumper Cap to be Reinstalled
  • Most owners do not have a problem reinstalling the bumper cap. But some owners cannot reinstall the cap after installing Curt trailer hitch # 13333 on a 2014 Ram 1500. It is possible that on your truck, if you do end up having difficulty, that the hitch could be pulled up tighter to the bumper causing the cap not to fit back on. If this happens to you what you can try is to run the bolt in and out a few times to see if it can seat lower in its spot. You can also try changing the order...
    view full answer...



Used Items Available
RU-17-13-00102411

Condition: Missing Parts

Notes: missing hardware.

Our Price: $39.73

Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Photos by:
Theodore B
Expert Research:
Michael L
Video Edited:
Zack K
Video Edited:
Andrew K
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Video Edited:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Jacob T
Expert Research:
John H
Video Edited:
Patrick B
Video Edited:
Andrew L
Expert Research:
Adam R
Video by:
Kathleen M
Expert Research:
Jeffrey L
Test Fit:
Randy B
Video Edited:
Chris R
Test Fit:
Jared G
Updated by:
Amanda M
Video by:
Zach D
Photos by:
Stacy F
Test Fit:
Brent H
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.




^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.