1. Trailer Hitch
  2. Curt
  3. Class III
  4. 2 Inch Hitch
  5. 6000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13322
lowest price pledge
Retail:$259.71
Our Price: $129.96
You Save: $129.75
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 31 lbs
Quantity: 
Curt 6000 lbs GTW Trailer Hitch - 13322
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13322 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (680)
  • Q & A (82)
  • Photos
  • Why etrailer?

Curt Trailer Hitch - 13322

  • Curt
  • Class III
  • 2 Inch Hitch
  • 6000 lbs GTW
  • Visible Cross Tube
  • 600 lbs TW
  • 10000 lbs WD GTW
  • Custom Fit Hitch
  • 1000 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 6,000 lbs
      • Maximum GTW when used with weight distribution: 10,000 lbs
    • Maximum tongue weight: 600 lbs
      • Maximum TW when used with weight distribution: 1,000 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13322 Curt Class 3 Trailer Hitch Receiver

Installation Details 13322 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13322

Average Customer Rating:  4.9 out of 5 stars   (680 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- 13322
by:
2007 GMC Sierra New Body

Just installed the Curt Trailer Hitch Receiver to my 2007 GMC Sierra New Body Style and it went smooth. This replaced an old rusted out OEM hitch receiver and the Curt fit like a glove. I was able to install it on my own with the help of a floor jack raising it up in the middle and finger tightened the two bolts under the bumper then bolted up the rail bolts. I then removed the floor jack and torqued down all the bolts slid in the Curt ball mount and secured it with the included pin and cotter pin and I was back to towing my Waverunners to the harbor for some fun.



- 13322
by:

Just received the hitch...looks like it will be an easy, perfect fit. I chose to order online rather than call and etrailer made that process very simple. My order arrived quickly and complete. I’m a repeat customer and due to their great customer service, excellent advice, fast shipping and large inventory I will continue to be.


Comments
Hitch has performed flawlessly pulling a heavy bass boat. Thanks again!
Jim - 09/08/2020


- 13322
by:

Excellent replacement for a factory hitch or for a truck that didnt come with one originally equipped. All hardware included and of nice quality. Instructions easy to follow and clearly printed. No drilling required. Bolts into existing threaded holes in bumper support and bumper brackets where attached to frame of truck. Third set of holes use a carriage bolt, large washer and nut through and existing hole in frame near the leaf spring mount. Threads in bumper support may need rust cleaned out with a tap (14mm x 2.0 thread pitch) if a factory hitch was not installed and truck has lived in the rust belt states. Some minor trimming was required of the bumper plactic covers on my particular application. A sawzall or a hacksaw with a fine tooth blade works great and leaves a clean cut. Otherwise installation time was about 20 to 30 mins using air tools and a lift. Product price and shipping was great, recieved hitch packaged nicely and undamaged within a few days of placing order.



- 13322
by:
2000 Chevrolet Silverado

Seems like a good hitch . If my bumper wasnt a bit out of wack it would have mounted right up after some banging on the bumper it went right on even around my dual exhaust, So Happy. Shipping was fast and as described and a great price. Can't wait to tow my new travel trailer.


Comments
Works great, towing my travel trailer
Justin K - 07/29/2019



- 13322
by:
2012 Chevrolet Silverado

I opted to purchase a Curt trailer hitch for my truck. Sheila took my order over the phone and made sure I had the right product for my 2012 Chevy Silverado. Great service. I received the hitch in perfect condition. Watched the installation video and it went on just as easy as I expected it would. Great product and a great price with free shipping. I highly recommend etrailer.com for anyone who needs a great reliable product supplier. Thanks again!


Comments
Still in great shape. Cant say enough about etrailer.com. Great product. Great people.
Scott B - 09/04/2018



- 13322
by:

2003 GMC Sierra 1500 5.3 engine. Good quality hitch and well packaged with no damage. My only complaint is how the holes lined up. Be sure to put in two bolts loosely at receiver first! Also, I needed to "fill a gap" with several large washers on each side because this spot was lower than the bumper. Then I still needed to widen one of the rear holes (where bolt threads into welded nut). This hole was elongated, but the wrong way. It is elongated side to side and if it were done in line with front to back of vehicle, it would have worked fine. I would also encourage the use of a blue thread locker.



- 13322
by:
2011 Chevrolet Silverado

Received the hitch wednesday and installed it thursday. The install went great, I took my time and installed it in about a little over an hour. Everything aligned properly, and fit like a glove on my 2011 Chevy silverado. Glad I got the curt hitch, it looks beefy and heavy duty, like a factory install. Glad I installed it myself, the dealers around here want about $500 to install the whole deal. Watched your install vids, they were very helpful. Googled trailer hitches on the internet and you guys came up, so I thought I'd give you a try. Completely satisfied doing business with etrailer.com. Shipping was fast, price was right. Here's a few pictures. Thanks Guys, John



- 13322
by:

Haven’t installed it just yet but it really looks good,I’d say a perfect match to the oem hitch. As was before the service was great,I received my order three days sooner than I expected!


Comments
Perfect
Gary - 12/08/2020


- 13322
by:
2007 Chevrolet Silverado

My 2007 Classic Silverado Crew Cab 4x4 did not have a factory hitch receiver, so I selected the 13322 Curt Hitch Receiver because it closely resembles the OEM hitch receiver and attaches to the bottom of the bumper. Installation was easy, as shown in the videos and described by other reviewers. All holes aligned perfectly. I did not remove the spare tire as it is not necessary. I used two jack stands to raise/support the receiver frame in place while I started the first bolts. I had the 22mm and 19mm sockets needed to tighten and torque the bolts/nuts. It looks great and I now am able to tow. For the wiring I installed the 30955 Hopkins 7-Way and 4-Way Trailer Connectors to the bumper adjacent to the license plate. This required drilling a 2-1/8" hole in the bumper, which was time consuming, but it now resembles a factory installation. I was able to remove the license plate and connect to the factory plug. I ordered these parts from etrailer for a number of reasons: 1) The website is intuitive and contains a tremendous amount of information for the person who is trying to research product information; 2) the selection and inventory is amazing; 3) the prices are very competitive – free shipping for orders over $99; and 4) the dedicated customer service is outstanding – the email communication is prompt. I ordered on a weekend and it was delivered by the following Friday. A very positive first experience.



- 13322
by:
2000 Chevrolet Silverado

Excellent......fast, friendly ,dependable service Always pleased with products Easy to install. Instructions and video make the work a Breeze Hitch provide ability to level trailer for better towing ability


Comments
Excellent
Jimmy - 05/11/2020


- 13322
by:
2008 Chevrolet Silverado

I recently was getting ready another season of towing my boat and landscaping equipment. I inspected my trailers and all the lights. While installing the receiver into the hitch I noticed a small hole in the hitch frame. After further investigation I noticed the hitch was in bad shape. I looked around at different hitch suppliers and found etrailer. Great price great service. All hardware included installed myself. Thank you



- 13322
by:
2003 Chevrolet Silverado

Ok so I received it in 3 days which is great for free shipping and the next day the wife and I got off work at 2 where she went to get grand kids from day care and I went home to put on hitch. Got home and took out tools, got myself a talk glass of ice water because it's 107 here in AZ and dropped tire, took ball off bumper, and bolts off frame and installed new hitch. I put tire back under truck and was rolling with trailer on just before 3 and even before wife got home. Very easy and fit great. Can not beat the cost for this being so easy.



- 13322
by:
Lexus

The customer service Rep: Lexus G. was extremely helpful in directing me to exactly what I needed! Upon receiving the package, I was impressed with the way that the items where protected for shipping. The overall quality of the Hitch and Trailer Connector Socket where impeccable. The entire removal and installation of both units took no more than 35 Minutes. Thanks to to instructional Video! I am Very impressed with the Company, Service and most of all the Hitch and Light Connector. Thank You so very much eTrailer for everything. Frank "D"



- 13322
by:
2012 GMC Sierra

Curt hitches are extremely well made and I have installed them on several trucks over the years and used them extensively with good luck. This hitch was no exception; it fit perfectly and bolted up easily. However, the hardware package lacked the two bolts that tread into the bumper, necessitating a trip to the hardware store.



- 13322
by:
2002 Chevrolet Silverado

Recently bought the curt pn 13322 for 02 ecsb silverado. Packaged well, exxtremely good quality, was a pain to install due to bent bumper and one bolt broken off from previous owner but not etrailer.com fault. Pulled a 20 ft car hauler today and checked it afterwards, no issues whatsoever. Would definitely recommend. Check your bumper alignment prior to install.



- 13322
by:
2004 Chevrolet Silverado

I ordered this hitch late in the day on Jan 10th. I received it on Jan 12th just after noon. I was told it would likely take 4 business days. It took less than 48 hours and was shipped for free. I am not a mechanic but the installation took only about 20 minutes. Total cost for the hitch and electrical connector was much less than the quote I received from a local company to install the same hitch. Awesome hitch, awesome deal, awesome company. I am now a huge etrailer.com fan now!



- 13322
by:
2006 Chevrolet Silverado

Trailer hitch I bought from etrailer fit just like the OEM hitch. Only one small issue my hitch had the electrical connector plug directly in the hitch. There wasn't any place like that on my new hitch, so I had to buy a bracket and mount the connector to the truck's frame. Maybe I purchased the wrong hitch? But all in all, definitely a good hitch for the price.


Comments
The Curt Trailer Hitch Receiver # 13322
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
$129.96
is confirmed to fit your 2006 Silverado 1500, it is just not designed with a mounting bracket already placed for your wiring harness. While some aftermarket trailer hitches will come with a mounting bracket already welded to the hitch, most do not so that you can mount the trailer connector in the place that best suits your installation.
-- Etrailer Expert Victoria B - 04/16/2020


- 13322
by:

Great product. Exact fit and easy installation for replacement of rusted out factory hitch on 2003 GMC Sierra 1500.



- 13322
by:
2006 Chevrolet Silverado

Super fast shipping especially with it being free shipping! Hitch Arrived on the day it was scheduled and I had it installed in about forty-five minutes along with the trailer wiring kit. I plan on using it this weekend to tow my camper to the beach. Everthing looks great. Thank you guys for your promt service!



- 13322
by:
2000 GMC Sierra

from the ordering, to the products arrival was excellent service, and the hitch itself came in a well made delivery box, and the product was better than I expected! very pleased with this company! I would recommend them to friends and family



- 13322
by:

The new hitch looks great and was easy to install, thanks



- 13322
by:

Great product . If I ever buy another trailer hitch I will definitely buy it from etrailer .



- 13322
by:

The hitch fit perfect and it was delivered on time. I am very pleased with your service and will use your products again. Thanks for your honest advertising. I purchased a under the bumper trailer hitch and wiring kit for a Chevy truck. The welds and finish on the hitch were second to none. Thanks again.



- 13322
by:

Could not be happier, total installation time was 16 minutes. no joke -perfect fit. also price was not beatable. no need to say more



- 13322
by:
2003 Chevrolet Silverado

Trailer hitch and wiring kit showed up on time great product ,great price ,easy to install. Trailer hitch and wiring only took 20 minutes to install. My beer didn't even get hot before I was done.


49
718
Show More Reviews

Ask the Experts about this Curt Trailer Hitch

  • Hitch that Could Fit 2018 Gulfstream Vintage Cruiser
    We have hitches that are designed to fit the rear of RVs like your 2018 Gulfstream Vintage Cruiser but the hitch part # 13322 that you referenced would not be the correct option as it is for fitting the rear of a vehicle. Instead your best options is the multi-fit hitch # 13703 which is adjustable and is designed to fit frame widths between 22 and 72 inches. I looked up the rear of your trailer and as long as there's 12 inches between the end of the frame and the stabilizer jacks this hitch...
    view full answer...
  • Determining Size of Trailer that 2004 Chevy Silverado 1500 Can Pull
    As long as the loaded weight of the trailer you are looking at falls below the capacities for both the trailer hitch and your Silverado 1500, you will be able to pull the enclosed trailer safely for your lawn business. It isn't so much the size in terms of length and width, but its total weight that you will want to be concerned with. The actual towing capacity for a truck like yours can vary greatly depending on what it is equipped with (engine size, axle ratio, cab size, etc) so you...
    view full answer...
  • Recommended Factory-Like Trailer Hitch for 2008 Chevy Silverado 1500
    The trailer hitch I recommend for a 2008 Chevrolet Silverado 1500 is the Curt Trailer Hitch Receiver part # 13322 which has a factory like fit and finish at half the price. The capacities will also meet or exceed that of the factory trailer hitch as well. Please note, we only offer aftermarket trailer hitch solutions not factory options.
    view full answer...
  • Towing Capacity of 2004 Chevy Silverado and Recommended Hitch for Towing Enclosed Trailer
    In order to find the correct towing capacity for your 2004 Chevy Silverado, you're going to want to consult with the owner's manual; from what I was able to find, you'll be able to tow between 7500 and 9100-lbs depending on the exact model and specs on your truck. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended cab) or 8,200 lbs (regular cab); if it is four-wheel drive and has a 4.10:1 axle ratio the towing capacity is 8,800 lbs (extended...
    view full answer...
  • Class III Trailer Hitch Fit for 2000 Chevy Silverado 2500 LD
    The Curt Trailer Hitch Receiver # 13322 you referenced does fit a 2000 Chevy Silverado 2500 LD and I have linked an installation video of this hitch on a 2000 Silverado for you to check out. There are also customer reviews with photos from customers who have installed this on their 2000 Chevy Silverado. However, there are a number of other Class III trailer hitches that are confirmed by the manufacturer to fit a 2000 Chevy Silverado 2500 LD, and the other options are the Draw-Tite Max-E-Loader...
    view full answer...
  • Difference Between Curt Hitches 13322 and 13301 for 2011 Chevy Silverado
    The difference between the Curt hitch part # 13322 and the # 13301 that you referenced is an aesthetic one mainly. The design of the # 13301 is that the hitch tube is welded to the bottom of the cross tube which means that from the rear of the vehicle you'd only see the hitch opening. This is what I'd go with if it was me. The # 13322 instead has the hitch opening welded to the front of the hitch tube which means the cross tube is going to be visible from the rear. This hitch's crosstube...
    view full answer...
  • Trailer Hitch Recommendation for a 2004 Chevy Silverado 1500
    The Curt hitch part # 13322 has been confirmed as a fit for your 2004 Chevy Silverado and has more towing capacity than what your trailer would call for so it would work well for you. Here are it's capacities. Maximum gross trailer weight: 6,000 lbs Maximum tongue weight: 600 lbs I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch...
    view full answer...
  • Does the Curt Trailer Hitch Receiver 13322 For a 2002 Chevrolet Silverado Come with Hardware
    Yes, the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2002 Chevrolet Silverado does come with all of the mounting hardware that you need for installation. This hardware bag consists of carriage bolts, hex head bolts, flange nuts, and conical tooth washers.
    view full answer...
  • Torque Specs for Installing Curt Trailer Hitch Receiver # 13322 on 2005 Chevy Silverado
    When installing the Curt Trailer Hitch Receiver # 13322 on your 2005 Chevy Silverado 1500, you will need to torque the rear M14 bolt to 126 lb-ft and all the 1/2 inch fasteners to 110 lb-ft. I have attached an installation video that you can use for reference, along with the written instructions that you can take a look at. This Class III hitch features a 2 inch receiver and a 6,000 pound towing weight capacity. Since the hitch will use existing holes in the truck's frame, no drilling...
    view full answer...
  • Does Curt Hitch part # 13322 Fit a 2008 Chevy Silverado 1500
    The Curt hitch part # 13322 is a confirmed fit for your 2008 Chevy Silverado 1500. It's pretty easy to confuse which bolt holes are to be used for installing a hitch when looking at the frame underneath the vehicle. I attached a picture that shows how and where the hitch installs to the truck frame. Your truck would be no different as long as you do in fact have a 2008 Silverado 1500. There would be no drilling required to install the hitch either.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for 2002 Chevrolet Silverado 1500 Extended Cab
    I recommend going with the Curt Trailer Hitch Receiver, # 13322. This custom fit hitch offers bolt-on installation so no welding or drilling is required. I have attached an installation video for you. Although it sounds like you are a seasoned tower and probably already have the additional components needed for towing, I did want to mention our etrailer Ball Mount Kit, # 989900, just in case. This kit comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
    view full answer...
  • Availability of Trailer Hitch for 1992 Mazda Miata to Carry Bike Rack
    Due to the small size of the vehicle, there is not a Class III hitch with a 2 inch receiver available for the 1992 Mazda Miata. There is however a Class I available that has the 1-1/4 inch by 1-1/4 inch receiver opening, part # C11729. Because of the low 200 lb tongue weight capacity of the Class I hitch, bike racks used in a Class I hitch are limited to carrying 2 bikes only. Any additional bikes would place the load too far rearward of the receiver opening. This extended distance would...
    view full answer...
  • What Kind of Fascia Trimming is Required for Trailer Hitch Installation on a 2010 GMC Sierra
    To install Curt Trailer Hitch, # 13322, you will need to trim a rectangular area in the center rear fascia where the hitch receiver will be. It is a 3 inch tall by 6-1/2 inch wide area. I have included a link to the installation details that shows a diagram of the area that needs to be trimmed. The instructions also state that not all model years will require trimming and to check before installation. I have included a link below to an install video on a similar truck. If you find that...
    view full answer...
  • Towing Capacity Of 2004 Chevy Silverado 1500 4x4
    Looking at the 2004 owners manual, the Chevy Silverado 1500 4x4 Extended Cab 5300 V8 maximum trailer weight is listed as 9,200lbs. The average enclosed cargo trailer can weigh between 2,000-4,000lbs empty so you should have the capacity depending on the amount of weight you intend to add. A weight distribution system is often a great addition to a towing setup to reduce sway experienced towing, especially when approaching the top end of your available towing capacity. The Equal-i-zer...
    view full answer...
    Image 1 for
  • Is Fascia Trimming Required to Install Curt Trailer Hitch 13322 on a 2012 Chevy Silverado 1500
    On some years that Curt trailer hitch # 13322 fits, there may be some trimming of the rear fascia for the hitch to fit properly. It is not necessary on all models but you will only know once you go to install the hitch. The area that would need to be trimmed would be at the bottom center of the rear fascia. It is an area that is 6-1/2 inches across and 3 inches tall measured from the bottom of the fascia. On the 2012 though it does not appear that trimming is required. I have included...
    view full answer...
    Image 1 for
  • Will the Curt Class III Trailer Hitch # 13322 Fit a 2009 Chevrolet Silverado 1500
    Yes, the Curt Class III Trailer Hitch, # 13322, will fit your 2009 Chevrolet Silverado 1500. If you are looking to do some towing, I recommend looking at a ball mount like part # MT70380. This is an adjustable ball mount rated up to 12,000 lbs of towing capacity and it comes with a 2" and a 2-5/16" hitch ball. If you also need trailer wiring, I recommend the Pollak 7-Way Twist-in RV Trailer Connector, # PK11916. I have attached an installation video of this harness for you to check out.
    view full answer...
  • What Size Socket or Wrench Is Needed to Install Curt Hitch part # 13322
    The install hardware that is included with the Curt Hitch part # 13322 that you referenced includes bolts that are M14-2.00. That size of bolt head calls for a 21 millimeter socket or wrench. I attached an install video for you to check out as well.
    view full answer...
  • Trailer Hitch for a 2001 GMC Sierra 2500HD Towing a 10,000 Pound Car Hauler
    I like the Draw-Tite trailer hitch # 41944. It will fit long and short bed models of the 2001 GMC Sierra 2500HD. It has a gross trailer weight capacity of 13,000 pounds and tongue weight capacity of 1,950 pounds. When used with weight distribution the gross trailer weight capacity is 16,000 pounds. I have linked the instructions and a video showing a typical installation for you. For a compatible ball mount kit I recommend the etrailer ball mount kit # EBMK2416. It comes with a ball...
    view full answer...
  • M14 Bolts for Trailer Hitch 13322 Will Not Thread Into Weld Nuts on a 1999 Chevy Silverado
    The likely problem is that the weld nuts on your 1999 Chevy Silverado have corrosion and road grime in them and will need to be cleaned out prior to threading the bolts in. This actually comes up a lot on any vehicle that has seen at least one winter. I have included a link to are help article that explains how to clean out the weld nuts so you can install the bolts. You do not want to force the bolts in because you could end up breaking a weld nut. And you would not want to use a different...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2002 GMC Sierra Without Factory Tow Package
    Hitches for your 2002 GMC Sierra are offered in several classes and sizes and the correct fit will depend on the exact version of the truck that you have. The link provided will take you to our main page for hitches for the 2002 Sierra; you can use the Select Vehicle Style drop-down menu to choose the version you have and see hitches that will work for you. For example, if you have a 1500 series you can use Curt hitch # 13322. An install video for this hitch is linked. Again for example,...
    view full answer...
  • Are Trailer Hitch Frame Mounting Brackets Replaceable if Rusted
    A Class III hitch like the Curt # 13322 is fully welded as one single unit before receiving its powder-coat anti-corrosive finish. The two frame mounting brackets are not offered as replacement parts for this or for any other hitches we offer for your truck. Just for reference I have linked you to our page for all trailer hitches that fit your 2005 GMC Sierra 1500. These include Class III, Class IV and Class V hitches from Curt, B&W and other makers. You can remove the hitch from the...
    view full answer...
  • What Size Bolts Are Used To Secure a Trailer Hitch To the Bumper On a 2006 GMC Sierra 1500
    In regards to the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are M14-2. If you are just looking for a hardware kit for a trailer hitch that you already own then you can use the Replacement Hardware Kit for Trailer Hitches part # RHK to obtain these bolts and the rest of the hardware that you need.
    view full answer...
  • Trailer Wiring Mount for Use with Curt Hitch 13322 on a 2004 Chevy Silverado 1500 4 x 4 LS
    The Curt hitch part # 13322 does not have a bracket for mounting trailer wiring. Commonly people will use the part # 74682 on trucks like your 2004 Chevy Silverado and drill holes in the lower portion of the bumper to mount the connector. Due to how the hitch is mostly covered by the rear bumper there really isn't a good place to mount the connector on the hitch tube.
    view full answer...
  • Do All 6 Bolts Need to Be Used to Install the Curt Trailer Hitch Receiver Part # 13322
    You will need to attach and secure all 6 bolts holding the Curt Trailer Hitch Receiver part # 13322 to your 2007 GMC Sierra Classic. Not attaching all 6 bolts would void the warranty of the hitch and likely affect its capacities/performance. I recommend trying to bend the bumper back into place or buying a new bumper entirely as the two forward most bolt holes will need to be attached. To ensure the new bolts do not cross thread while attaching to the weld nuts on the frame you will...
    view full answer...
  • Weight Distribution or Higher Capacity Hitch for 2006 Chevy Silverado 1500 and 5300lb Trailer
    Curt trailer hitch # 13322 is rated for 600 pounds tongue weight without weight distribution and 1,000 pounds tongue weight with weight distribution. Gross trailer weight is 6,000 pounds weight carrying but 10,000 pounds with weight distribution. If the trailer weighs 5,300 pounds, and tongue weight is typically 10 to 15 percent of the gross trailer weight, that should make the tongue weight between 530 and 795 pounds. This is not including the weight of anything loaded in the truck...
    view full answer...
  • Trailer Hitch for a 2009 Chevy Silverado 1500 LS
    The Curt Class III Receiver you mentioned, # 13322 is a fit for your 2009 Chevy Silverado 1500. Just to be sure, I have confirmed this with Curt. All necessary hitch installation hardware is included, but to complete your towing system, you might also need the following: 7-Way Trailer Connector, # PK11916 Ball Mount # 2753 1-7/8 Inch Trailer Ball # 19260 2 Inch Trailer Ball # 19247 2-5/16 Inch Trailer Ball # 19287 Locking Hitch Pin # e98882 To view install videos for the hitch...
    view full answer...
  • Availability of Replacement Hardware for CURT Trailer Hitch # 13322
    The specific hardware used for the CURT trailer hitch, # 13322, can be found in the instructions which I have linked for you. Hitch hardware should be grade 5 or higher. To make it easier, you can order # RHK. This is the number for replacement hardware. On the RHK product page, enter the hitch number and choose the manufacturer where indicated and the correct hardware will be assembled by our team.
    view full answer...
  • Trailer Hitch Rated for at Least 8,000 Pounds for a 2000 Chevy Silverado or C/K Series 1500
    For the 2000 model year Chevy trucks there was both an actual Silverado model and C/K series models with a Silverado trim option. For an actual Silverado model, 1500, I recommend Curt hitch # C14332 rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight when NOT using weight distribution. When using weight distribution it is rated for 1,200 pounds tongue weight and 12,000 pounds gross trailer weight. If your truck is a C/K series 1500 then I recommend Curt hitch...
    view full answer...




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Sarah W
Updated by:
Sarah W
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.