Menu Icon

Price: $178.75

In Stock

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13076

lowest price pledge

Retail:$202.32

Our Price: $178.75

Trailer Hitch

This item qualifies for Free Shipping

Quantity: 

Only 2 in stock. Order soon.
zoom in icon
zoom out icon
pop out icon replay 360 icon
horizontal rotate icon

Product Images

curt trailer hitch 4000 lbs wd gtw 400 tw receiver - custom fit class iii 2 inch
curt trailer hitch class iii 4000 lbs wd gtw 13076
curt trailer hitch custom fit 4000 lbs wd gtw receiver - class iii 2 inch
curt trailer hitch custom fit 400 lbs wd tw receiver - class iii 2 inch
curt trailer hitch class iii 4000 lbs wd gtw 13076

In Use/Installed

2013 ford transit connect trailer hitch curt custom fit 4000 lbs wd gtw receiver - class iii 2 inch
2013 ford transit connect trailer hitch curt class iii 4000 lbs wd gtw 13076
2013 ford transit connect trailer hitch curt class iii 400 lbs wd tw 13076
2013 ford transit connect trailer hitch curt custom fit class iii receiver - 2 inch
2013 ford transit connect trailer hitch curt custom fit 4000 lbs wd gtw 13076
2013 ford transit connect trailer hitch curt custom fit 400 lbs wd tw in use
2013 ford transit connect trailer hitch curt class iii 4000 lbs wd gtw in use
2013 ford transit connect trailer hitch curt 4000 lbs wd gtw 400 tw 13076
2013 ford transit connect trailer hitch curt custom fit 400 lbs wd tw receiver - class iii 2 inch
2013 ford transit connect trailer hitch curt custom fit class iii in use

Customer Photos

curt trailer hitch custom fit 4000 lbs wd gtw 13076

Videos


  • Curt
  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • 350 lbs TW
  • Visible Cross Tube
  • 4000 lbs WD GTW
  • Custom Fit Hitch
  • 400 lbs WD TW
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from Curt. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13076 can be ordered online at etrailer.com or call 800-298-8924 for expert service.



Curt Trailer Hitch - 13076

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Made in the USA


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 4,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 400 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13076 Curt Class 3 Trailer Hitch Receiver



13076 Installation InstructionsInstallation Details 13076 Installation instructions

This Product Fits The Following Vehicles

2010 - 2013 Ford Transit Connect



Video of Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Trailer Hitch Installation - 2012 Ford Transit Connect - Curt

Today on our 2012 Ford Transit Connect, we're going to be taking a look at and installing the Curt Class Three custom fit trailer hitch receiver, Part number 13076. This is what our hitch is going to look like fully installed. You're going to see the nice cross tube going across here. You're going to have that nice reinforced collar on your receiver tube. This is a Class Three, and it's going to have a 2 inch by 2 inch reinforced receiver tube opening. This is going to use a standard five-eighths pin and clip.

They are not included, but you can pick one up on our website using part number PC3. Now, the safety chain loops are going to be this rolled steel stock, and we welded it underneath. As you can see, there's plenty of room to get most sized hooks on or off. We don't have to worry about our exhaust, because the hitch is going to accommodate our exhaust and go right around it, and then come and you're going to see that cross tube come across with the receiver tube in the middle. Now, this hitch features a 350 pound tongue weight capacity, and that's going to be the force pushing down. It also has a 3,500 pound gross trailer weight rating, which is the amount that it can pull.

Now when in use with conjunction with a weight distribution system, the tongue weight is going to bump up to 400 pounds and the gross trailer weight rating is going to bump up to 4,000 pounds. Now, I do want to mention you need to double check with your vehicle's owners manual to make sure that your vehicle can handle pulling that amount of weight. Now I'm going to give you a few measurements to help you when deciding on the accessories for your new hitch such as a ball mount, bike rack, or cargo carrier. From the ground to the top inside edge of the receiver tube is 12 and three quarter inches. Now, the hitch does stick out from the edge of the bumper. From the hitch pin holds the outer most edge of the receiver tube is three inches.

From the hitch pin hole, it's pretty flush with the edge of our bumper. Now that we've gone over some of these features, let's go ahead and show you how we get it installed. To begin our installation, we're going to need to remove our spare tire. We can open up our door and take the included tool that's in the back of the vehicle, and just start lowering it down. Just remove the yellow cover and pull our cable out. Then we can remove our spare tire.

We're going to have to remove the exhaust hanger. If you come to the driver's side here, right underneath, right behind our bumper, we're going to be removing this exhaust hanger temporarily. What we're going to do actually is we're just going to grab the rubber, and we're going to reach in and we're going to turn it 90 degrees, and it'll allow it to come out that slot just like that. Now on the passenger side, if we come over, you're going to see a wire attached to two points on the frame. I'm going to take a small screw driver, and I'm going to pry out the clip that's holding it against the frame. We're just going to move this to the side for right now. If you pay attention here, these are going to be our existing weld nuts that we're going to be using. Now I'm just going to take a little bit of penetrating oil. I'm going to spray it in there and I'm going to take a brush. This nylon brush, and just clean out our threads a little bit, making sure that nothing's in there, not going to get contaminated or mess up the bolts. Now you can pick up one of these brushes on our website, using part number 814092. I'm going to go ahead and clean out all our weld nuts, and then I have two on each side. With an extra set of hands we're going to put our hitch into place. Now we're going to start on the passenger side. You want to make sure you stay away from all the lines and not damage any wires. With the passenger side in place, I can raise it over our exhaust, and with our hitch in place we can take the hardware with the conical tube washers, teeth facing towards the hitch, and we can loosely install it so the hitch will support itself. Now, with our hardware loosely in place, we can go ahead and come back and snug them up. I'm going to be using a 19 millimeter socket. Our wire that we removed earlier should mount right here, but we don't have quite enough room. What I'm going to do instead is I'm just going to take the wire, and just so it's out of the way, I'm going to zip tie it to itself. That way it's nice and secure and not hanging down. Now it's out of the way, and we won't have to worry about the wires getting damaged. With all of our hardware in place, we can begin to torquing our hardware down to the specified amount in the instructions. Now, all we have left to do is take our rubber hanger, and again turning it 90 degrees so that it can fit into the channel, pushing it up, and then rotating it back to lock it into place. Now we can put our spare tire back. That'll finish up our look at the Curt custom fit trailer hitch receiver, part number 13076 on our 2012 Ford Transit Connect.


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13076

Average Customer Rating:  5.0 out of 5 stars   (9 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

- 13076

by:


Great hitch, easy to install with two people. Difficult to install all my myself. Would recommend! My hitch arrived ahead of schedule with standard shipping. Great product, great service. 369616



- 13076

by:


Looks to be a good hitch. It was easy to install. I was able to install it myself in about 45 minutes. It installed exactly like the instillation video shows. Quick FREE shipping and great communication once I hit the buy button. It just doesn't get any better than that. Good experience and I will not hesitate to purchase from etrailer again in the future. Thank you! 434180



- 13076

by:


This is my 6th Curt trailer hitch I have installed on my vehicles over the years. As usual, it fit perfectly, did not interfere with any other parts and looks great after installation. I primarily use my hitches for bike transport but also tow a light aluminum utility trailer from time to time. Good product, fast shipping, excellent installation instructions. 364682



- 13076

by:


Great customer service! Special thanks to John G for upgrading my standard 5-7 day shiipping to express 3-5 days; I actually got it in 2 days and the tracking was accurate, via UPS, and detailed (USPS take notice)! The instructions were easy to follow which made the hitch installation go very smoothly. Overall it took me maybe 45 minutes but i took my time. 24147



- 13076

by:


Product was delivered on time as promised. The hitch was very easy to install with 3 people and ramps. All holes lined up accurately. Installation took less than a half hour. Used several times, with no problems. 319315



- 13076

by:


Super easy to install the video was right on as was the instructions great tip on tapping and cleaning weld nuts before installing saved my but thank you for a great product 444407



- 13076

by:


Great products, excellent service and resources. Will recommend to others and shop here again! 353666



- 13076

by:


Just finished took about 1 hour but was in no hurry. Instructions good fit like a glove. 40213



- 13076

by:


Worked great easy to install. 33061


9
9

Ask the Experts about this Curt Trailer Hitch
Do you have a question about this Trailer Hitch?


  • Trailer Hitch and Wiring Recommendation for 2010 Ford Transit Connect
  • The Curt hitch part # 13076 is a confirmed fit for your 2010 Ford Transit Connect and would be a great option. It has plenty of towing capacity at 3,500 lbs total trailer weight and 350 lbs tongue weight plus the hitch is made in America. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2...
    view full answer...



  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Photos by:
Theodore B
Written by:
Lindsey S
Expert Research:
Jameson C
Video by:
Joshua S
Video by:
Kathleen M
Video Edited:
Chris R
Updated by:
Amanda M
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.



Product Experts Available Now!

Call 800-298-8924


^
About Us
photos and videos
1,056,204

Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570

Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511

Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+

Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
71

Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357

Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.