Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for light-duty towing, this custom, Chrysler Town and Country trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
Specs:
Tech Tip: Some minor fascia trimming may be required around the receiver on 2014 Chrysler Town & Country and 2008-2014 Dodge Caravan and Grand Caravan applications.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary
Average Customer Rating: 4.8 out of 5 stars (19 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.Product was delivered quickly and everything necessary for installation was present. Directions (especially video directions were very helpful and appreciated. We had our only problem disconnecting the circuit plugs from the taillights, otherwise all went sommothly.
Installed this trailer hitch on my wife's minivan Mother's Day morning 2016. Instructions were easy to follow and it fit without having to notch the bumper cover. Total installation time was about 90 minutes. Wife wasn't as excited about it as I thought she would be, so stopped and bought her some flowers, on the way home from fishing.
I finally got around to putting on the hitch!! Only had it a month! It took probably 20 minutes or so. Hardest part was dropping the exhaust system. Take it off from behind the muffler and back. Set hitch on floor jack, have helper hold it while you jack/guide it into place. Bingo, it's done, well, put in bolts first then you are done!
Following the instructions this was an easy install which I did myself and I'm 71. Ya, you have to move the exhaust pipe to the side, but that was no big deal.
I'm real happy about no modification was needed to the rear fascia. The receiver fits tight to the fascia and is hardly noticeable.
Unless you look close most people don't notice it's even there, which is why i like it, plus it does exactly what a hitch should do.
Another great product from Curt.....thank you !
It took about 50 minutes to install from start to finish. Most of the time was preparation, fitting it in place, and picking up my tool. The fit was perfect with the necessary attaching bolts in the auto frame. The video was a nice heads up to loosen the tail pipe.
I needed to use an 18mm box wrench for the front bolt above the tail pipe, otherwise a 1/2 inch ratchet wrench with a 13mm, 15mm, and 18mm worked. The tail pipe holder was a 1/2 socket.
I installed the hitch without raising the van. I put the hitch in place on the garage floor under the van and used a jack stand on each side to hold the hitch in place on the frame. I needed to raise the right side of the hitch and slide it in from the back as the tail pipe obstructed a straight up lift. On the left side there was no restriction. So fit the right side in place first. I always fit an accessory in place and hand tighten all the bolts before snugging and the final set. I put a few drops of medium (blue) Threadlocker on my bolts.
I received the hitch by UPS three days after I placed the order, using the free shipping option.
Thank you
Don J
This was my second purchase from etrailer.com. Both times I ordered a Curt hitch receiver and both times I have been completely satisfied with the product and the service.
Thanks guys, you're doing a great job!
Very easy installation on our 2014 T&C but I must admit my friend has a garage so we used his lift & pneumatic tools. I know I could have done it in my driveway but power tools made it so much easier. We just haul bikes so this Class II 1 1/4" is perfect. It sits just under the back bumper and back a couple inches from the edge so it's not sticking out at all. No trimming of the bumper was needed. All in all a great choice!
Very happy with the hitch. I do wish I had purchased the 2" model, but what we purchased has been adequate.
I appreciate the installation video however you may want to point out that the hanger bolts are small and can break when trying to remove
And alternate method is to pop out the rubber part of the hanger instead of tying to unscrew the hanger bolts
SO glad to have etrailer within driving distance! Pay a very competitive cost on the trailer hitch and etrailer installs it for no charge. Does it get any better? Thank you for a job well done!
good part, good delivery
it fit on my 2014 town and country. I use it for boats and small trailers
I installed it my self it went very well toke me 2hrs even with the wiring
Great product and easy to install. The video was a great help.
Very sturdy, well finished. Easy install. Quick shipping.
It took 10 minutes on a hoist and was finished. Well satisfied with product.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John L.
8/9/2017
works well. no problems