See what our Experts say about this CURT Trailer Hitch

• Do you carry Curt Class 3 Hitches for my 2001 GMC Sierra 1500
  We carry both of the Curt Hitches for your 2001 GMC Sierra the Curt Trailer Hitch Receiver part # 13332 which is square tube and the Curt Trailer Hitch Receiver part # 13322 which is the round tube. Of the two I like the square because like you said it is a little more concealed. The installation process will be the same on both of the hitches. The instruction are linked for you to check out. As well as a video my buddy Shane did on a 1999 Silverado which will be identical.
  view full answer...
• Availability of 2 Inch Receiver for 2011 Toyota Prius
  All the hitches we offer for a Prius are Class I with a 1-1/4 inch receiver. I do know in the past there was a company that offered a 2 inch receiver for a Prius, but it is no longer available. It could be possible to find a used one. Try doing a Google search on 2 inch Receiver for 2011 Toyota Prius, you might have some luck with that. When using a 2 inch receiver on a Prius, there is always the chance that somebody will try to use a hitch accessory that is too heavy for the vehicle....
  view full answer...
• Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1995 Ford E-250
  For your 1995 Ford E250 Van, I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver Class IV - 2" # 41906. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13322 will not fit your vehicle. If you will be towing with this hitch receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118344. This harness will install to your factory wiring behind each of your tail lights. You will need to remove either the tail light assemblies...
  view full answer...
• Difference Between Curt & etrailer Trailer Hitch Receiver For 2010 Chevy Silverado 1500
  Good question, and there is just a single difference between the Curt and etrailer trailer hitches that fit your 2010 Chevy Silverado 1500, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer: - etrailer Trailer Hitch Receiver # e98849 - Curt Trailer Hitch Receiver # 13322 The matte black finish is nice as it hides the inevitable dings, scuffs and scratches better than the glossy finish, so that's the...
  view full answer...
• Will the Curt Class III Trailer Hitch # 13322 Fit a 2009 Chevrolet Silverado 1500
  Yes, the Curt Class III Trailer Hitch, # 13322, will fit your 2009 Chevrolet Silverado 1500. If you are looking to do some towing, I recommend looking at a ball mount like part # C45900. This is an adjustable ball mount rated up to 14,000 lbs of towing capacity and it comes with a 2" and a 2-5/16" hitch ball. If you also need trailer wiring, I recommend the Pollak 7-Way Twist-in RV Trailer Connector, # PK11916. I have attached an installation video of this harness for you to check out.
  view full answer...
• Trailer Hitch Receiver Fit For 2003 Chevy Silverado 1500 HD
  We don't specify between the 1500 and 1500 HD in terms of fit in our guide, but I did check with our manufacturers for you to verify the fits for a trailer hitch receiver on your 2003 Chevy Silverado 1500 HD. The correct fit is going to depend on your bumper, so you'll want to keep that in mind. I'll go ahead and list out the options for you, and each hitch has a 2" receiver: - Standard Bumper: Curt Trailer Hitch Receiver - Class III - 6,000 lbs Towing/600 lbs Tongue Weight # 13322 -...
  view full answer...
• Trailer Wiring Mount for Use with Curt Hitch 13322 on a 2004 Chevy Silverado 1500 4 x 4 LS
  The Curt hitch part # 13322 does not have a bracket for mounting trailer wiring. Commonly people will use the part # 74682 on trucks like your 2004 Chevy Silverado and drill holes in the lower portion of the bumper to mount the connector. Due to how the hitch is mostly covered by the rear bumper there really isn't a good place to mount the connector on the hitch tube.
  view full answer...
• Identifying Hardware Included with Curt 13322 Class III Trailer Hitch
  The Curt # 13322 Class III hitch uses a total of 6 bolts, two 1/2 inch carriage bolts and four M14 bolts. The 1/2 carriage bolts have a smooth round head on them, while the M14 bolts have a hex head on them so they can be tightened with a wrench. I've provided a diagram showing the difference between the two types of bolts that shows precisely where they're installed. I've also linked to an installation video that you may find helpful.
  view full answer...
  
• Do All 6 Bolts Need to Be Used to Install the Curt Trailer Hitch Receiver Part # 13322
  You will need to attach and secure all 6 bolts holding the Curt Trailer Hitch Receiver part # 13322 to your 2007 GMC Sierra Classic. Not attaching all 6 bolts would void the warranty of the hitch and likely affect its capacities/performance. I recommend trying to bend the bumper back into place or buying a new bumper entirely as the two forward most bolt holes will need to be attached. To ensure the new bolts do not cross thread while attaching to the weld nuts on the frame you will want...
  view full answer...
• Torque Specs for Installing Curt Trailer Hitch Receiver # 13322 on 2005 Chevy Silverado
  When installing the Curt Trailer Hitch Receiver # 13322 on your 2005 Chevy Silverado 1500, you will need to torque the rear M14 bolt to 126 lb-ft and all the 1/2 inch fasteners to 110 lb-ft. I have attached an installation video that you can use for reference, along with the written instructions that you can take a look at. This Class III hitch features a 2 inch receiver and a 6,000 pound towing weight capacity. Since the hitch will use existing holes in the truck's frame, no drilling...
  view full answer...
• Bolt Hole Spacing for Curt Class III 13322 Trailer Hitch
  The bolt holes of the Curt # 13322 Class III hitch are 39.37 inches apart center to center for the set of holes closest to the rear bumper and 39.44 inches apart for the set closest to the front of the vehicle as shown in the provided photo. The hitch is a confirmed fit for a 2003 Chevy Silverado 1500. I've linked to an install video showing the hitch being installed on a 2003 Chevy Silverado 1500.
  view full answer...
  
• 2009 Chevrolet Silverado Replacement Trailer Hitch Bolts
  Yes, we do have replacement bolts for the Curt Trailer Hitch Receiver item # 13322 you were looking at and most other hitches if this is not the one you have. You will need to go to Replacement Hardware Kit for Trailer Hitches item # RHK and enter in your hitch item number, # 13322, and then the manufacturer, Curt, and it will pull up the replacement hardware for your hitch. If the hitch you were looking at is not the one you have, you will need to find out who made the hitch and then try...
  view full answer...
• Dimensions of Curt Trailer Hitch part # 13322
  The distance from left to right on the Curt hitch part # 13322 between the mounting holes on center is 35-5/8 inches and the distance from the mounting surface down to the top of the hitch opening is 5-1/2 inches.
  view full answer...
  
• What Size Bolts Are Used To Secure a Trailer Hitch To the Bumper On a 2006 GMC Sierra 1500
  In regards to the Curt Trailer Hitch Receiver part # 13322 which is a fit for your 2006 GMC Sierra 1500, the bolts that are used to secure the trailer hitch to the bumper are M14-2 x 40mm hex bolts. Therefore, the weld nuts inside the bumper are M14-2. If you are just looking for a hardware kit for a trailer hitch that you already own then you can use the Replacement Hardware Kit for Trailer Hitches part # RHK to obtain these bolts and the rest of the hardware that you need.
  view full answer...
• Does Curt Hitch part # 13322 Fit a 2008 Chevy Silverado 1500
  The Curt hitch part # 13322 is a confirmed fit for your 2008 Chevy Silverado 1500. It's pretty easy to confuse which bolt holes are to be used for installing a hitch when looking at the frame underneath the vehicle. I attached a picture that shows how and where the hitch installs to the truck frame. Your truck would be no different as long as you do in fact have a 2008 Silverado 1500. There would be no drilling required to install the hitch either.
  view full answer...
  
• Hitch that Could Fit 2018 Gulfstream Vintage Cruiser
  We have hitches that are designed to fit the rear of RVs like your 2018 Gulfstream Vintage Cruiser but the hitch part # 13322 that you referenced would not be the correct option as it is for fitting the rear of a vehicle. Instead your best options is the multi-fit hitch # 13703 which is adjustable and is designed to fit frame widths between 22 and 72 inches. I looked up the rear of your trailer and as long as there's 12 inches between the end of the frame and the stabilizer jacks this hitch...
  view full answer...
• What Size Socket or Wrench Is Needed to Install Curt Hitch part # 13322
  The install hardware that is included with the Curt Hitch part # 13322 that you referenced includes bolts that are M14-2.00. That size of bolt head calls for a 21 millimeter socket or wrench. I attached an install video for you to check out as well.
  view full answer...
• Towing Capacity of 2006 Chevy Silverado 1500 Crew Cab 4x4 With 3.42 Gears
  According to the owner's manual, a 2006 Silverado 1500 Crew Cab 4x4 with the 5.3L engine and the 3.42 rear end has a towing capacity of 7400 lbs according to the owners manual. I would consider the owner's manual to have the final word and be the best source for information regarding the towing capacity of your truck. The Curt # 13322 Class III hitch you'd looked at has a capacity of 600 lb tongue weight/6000 lbs towing, or 1000 lb tongue weight/10000 lbs if used with weight distribution. For...
  view full answer...
• Towing Capacity Of 2004 Chevy Silverado 1500 4x4
  Looking at the 2004 owners manual, the Chevy Silverado 1500 4x4 Extended Cab 5300 V8 maximum trailer weight is listed as 9,200lbs. The average enclosed cargo trailer can weigh between 2,000-4,000lbs empty so you should have the capacity depending on the amount of weight you intend to add. A weight distribution system is often a great addition to a towing setup to reduce sway experienced towing, especially when approaching the top end of your available towing capacity. The Equal-i-zer...
  view full answer...
  
• Towing Capacity of 2004 Chevy Silverado Regular Cab Long Bed 4.3L V6
  According to an online copy of the owner's manual, for bumper pull towing, the 2004 Silverado Regular Cab Long Bed with the 4.3L engine can tow 4400 lbs with the automatic transmission and 3.08 rear axle or 4900 lbs with the 3.42 axle. For a manual transmission, its 3400 lbs with the 3.08 rear end or 3900 lbs with the 3.42. 5th wheel towing capacities aren't listed for the 4.3L V6. The Curt Class III hitch you'd looked at, part # 13322 is a fit for your 2004 Silverado. For a ball mount/trailer...
  view full answer...
• What is the Towing Capacity of a 2004 Chevy Silverado 1500 with 4.8 Liter
  The towing capacity of your 2004 Chevy Silverado 1500 with 4.8 liter motor will depend on several factors including the bed length, cab style, rear end ratio, transmission type, and whether it is 2-wheel or 4-wheel drive: 2-Wheel drive models: Regular cab, short box, automatic, with 3.42 rear end = 6,500 pounds; long box = 6,300 pounds Regular cab, short box, automatic, with 3.73 rear end = 7,500 pounds; long box 7,300 pounds Regular cab, short box, manual, with 3.42 rear end = 4,500 pounds;...
  view full answer...
• Comparing Curt Trailer Hitches 13322 and 13332 For 2006 Chevy Silverado 1500
  That's a really good question, and there are a couple of differences between the two Curt hitches that fit your 2006 Chevy Silverado 1500, the round tube Curt Trailer Hitch Receiver # 13322 and the square tube Curt Trailer Hitch Receiver # 13332. The first difference is that the square tube hitch is going to be more concealed, as the tube is straight and going to be hidden behind the bumper more, while the round tube will stick out and the tube will be far more noticeable under your truck....
  view full answer...
  
• Towing Capacity of 2004 Chevy Silverado LS with 5.3L Engine
  The listed towing capacity of your 2004 Chevy Silverado LS short bed with 5.3L engine is going to vary depending on some specifics of the vehicle. If the Silverado is four-wheel drive and has a 3.73:1 axle ratio, the capacity is 7,800 lbs (extended cab) or 8,200 lbs (regular cab); if it is four-wheel drive and has a 4.10:1 axle ratio the towing capacity is 8,800 lbs (extended cab) or 9,200 lbs (regular cab). If your Chevy is two-wheel drive and has a 3.42:1 axle ratio, the towing capacity...
  view full answer...
• Trailer Hitch Fit for 2003 GMC Sierra 1500 4WD Extended Cab Pickup
  The Curt 2-inch round tube Class III hitch # 13322 fits your 2003 GMC Sierra 1500 4WD extended cab pickup IF it does NOT have a deep drop bumper or an aftermarket roll pan bumper. You can see installation in a 2003 Sierra by clicking on the included video link. If you also need a 7-way trailer wiring socket you can use part # HM40975.
  view full answer...

Do you have a question about this Trailer Hitch?