To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your Chevrolet Silverado's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Product not intended for vehicles with roll pan bumper, Tommy Gate lift, or 10" drop bumper. No drilling required for installation , Trimming of the fascia may be required for hitch installation. Check fit first, per instructions, to see if necessary
Average Customer Rating: 4.8 out of 5 stars (1251 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.It's an exact fit. I was able to install it on my own in 20 minutes. It is heavy, so be prepared to have a freind nearby because most of the struggle you'll have is threading the bolts, but my tip is to get one started under the bumper, then move on and repeat that until they're all started, then proceed to tighten it all down.
DO NOT FORGET to torque them down after tightening.
The picture I uploaded with this review shows it looks totally stock.
I absolutely recommend this hitch, eTrailer had the best price both for the hitch itself, AND for shipping.
The hitch is great, nice construction and perfect fit. All of the necessary hardware was included.
Karl
4/13/2024
I am still happy with the hitch, what really made the difference for me was the hardware included, it really made installation easy.
Got both items in 3 days and they went on without a "hitch". The trailer connector socket is very easy to install also! They both look awesone!!
Wayne
11/11/2023
Product is performing as expected, no issues at all.
I received my hitch assembly today! It's exactly the right part, can't wait to throw it on the truck! Thanks etrailer!
I was very pleased with all aspects of doing business with etrailer.com from my connection with them online to the delivery of the trailer hitch. Their follow up via email for questions as well as support were appreciated. I would recommend etrailer.com for their professionalism as an online business.
It took me and my friend 40 minutes from start to finish to swap out the old Trailer Hitch Receiver with the new Trailer Hitch Receiver. We didn't have to remove the rear bumper nor move the spare tire. Great product! I am very happy with my purchase!
Works as it should! it would be great if the hitch had previsions to mount trailer connector.
Literally took the old one off in 12 minutes and installed this one in less than 7 minutes perfect fit.
George M.
3/10/2024
Been a year and its still just like new no problems at all sure glad I made this purchase
Great product, everything I expected ,bolted right into place where the factory receiver bolts to on the frame,and it also bolted to the bumper where the factory receiver did. Most other brand receiver hitches only bolt to the frame and not to the bumper which l believe gives extra support.Thank you
Missing all hardware to mount the hitch! What gives I’ve been ordering stuff for years from this place never had any issues prior
Brooke M.
9/12/2024
I am so sorry. I am wondering if it fell out in transit somehow. In any case, if they havent already I will make sure we get some replacement hardware sent to you quickly!
The hitch lines up with the underbody frame, but not with the mounting holes under my new bumper. Need to find a way to make it fit under the bumper. Any suggestions are welcome.
Douglas
5/13/2024
Really nice product.
The hitch receiver that I ordered was in stock and arrived at my house quicker than I expected. Removing the old hitch and installing the new one took about half an hour. The included hardware worked perfectly.
Rob B.
6/5/2023
Ive been using this hitch for about a year and it has lived up to my expectations. The safety chain holes are big enough for my chain hooks to hook in them easily. My original equipment hitch was difficult to hook them into.
Great product heavy duty hitch built very well but only concern was the package was damaged in shipping and the powder coat on the hitch was all scratched up pry have to use touch up paint on so it dosent rust out the spots that are down to bare metal
Perfect fit for my 2011 silverado new hardware, product quality is pristine, honestly looks original beside the fact the original one used 3 bolts on the frame this only uses 2 not complaining at all would definitely recommend to everyone
Great hitch! Fits in the factory frame as it should. Unfortunately, the bolt holes did not line up and I had to drill a new hole on the hitch to mount it properly. Easy fix, just not quite what I wanted to do with a $[XX] product.
I have a 2011 Chevy Silverado 1500 LT/5.3L. When it arrived I measured it up to my truck and by surprise, it fixed perfectly. I then proceed to install the hitch. It only took me about 30 minutes to install. I am delighted that I purchased this hitch. Thank you
After 1 year of ownership I am very happy. Does its job. Simple to set up with wrenches and came with instructions in case. They also make videos for YouTube certified mechanics. Have pulled upwards of the tow capacity rated for my truck with no issues whatsoever. Great coat of paint no cracking or surface rust yet. Quick shipping, e trailer takes their business seriously.
Probably one of the best upgrades I’ve made for my truck aside from the add-on reverse/rear camera kit that I also purchased here. Can’t say enough good things about this company. If I need something else I will come here first. 11/10
The class 3 hitch is very nice. Beautiful welds and finish. Very solid and heavy duty. I'm really happy with the hitch.
The issue I had was I'm a DIY'er, emphasis on the "Y". So when it came time to install, I found myself under the truck, holding he hitch up with my knees as I fumbled around trying to get a new bolt into the welded on nut. I ended up using the original bolts to secure the hitch, then swapped the old bolts out for the new one by one.
The reason this worked was a chamfer on the old bolt. Made it very easy to find the threads and start the bolt. Attached is a picture. Overall the bolt looks pretty good after being under the truck for 15 years.
As I said the hitch itself is well made and I am very satisfied with what I bought. Maybe you can consider a slightly different bolt.
Bolted up just fine.
One improvement would be a predrilled spot to attach plate for wire harness.
Wayne L.
3/9/2024
After a year, pulling a friend or two out of the snow or towing with in limit, Ive been happy with it. When I first called and ordered it they it would fit. Could not have lined up better. Two man job but a good investment. Would order again in the future.
Well Etrailer did excellent job, correct product good fit and quality for the price (all though when I looked at just a 6 bolt pattern I was double checking the order an confirm with the invoice and read the hardware instructions this is what is used on a class III 2" hitch ) , all hardware included , easy to follow directions and very fast shipping (bonus free shipping on this item ) this hitch went on my 2013 GMC Sierra " without a hitch" the rest is up to you, invest in some good rust penetrating spray apply 24hrs before and good luck
I ordered a hitch for 2012 Chevy Silverado 1500 and you send a hitch that fits Toyota …. I have already took the old hitch down and now I go without a hitch … thanks for noticing
Jenny N.
5/15/2024
Michael, I am sorry about shipping the incorrect hitch to you. We will have the correct one sent for your 2012 Chevy Silverado 1500 ASAP.
Great products and customer service if I ever need anything for my truck or trailers this is where I will be had to replace my old receiver off my 06 silverdo couldn't hav been easier
Great product, great customer service and a wonderful company to deal with. I highly recommend buying from Etrailer
Eric
4/1/2024
Works great! No issues at all 1 year later. Great product, great company.
We are a car dealer in central PA and have bought several Receivers and various wiring products from etrailer, we have yet to be disappointed. Fast shipping, Quality products, and an easy to use web site!
This was a perfect fit for my truck. Installation was easy and only took maybe 30 minutes.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott H.
4/28/2024
It atill works very well. I use it a lot to pull a utility trailer. It has held up well and I think it will never fail.