1. Trailer Hitch
  2. Chevrolet
  3. Silverado 3500
  4. 2014
  5. Draw-Tite
FITS 2014 Chevrolet Silverado 3500
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # 41942
lowest price pledge
Our Price: $220.42
You Save: $118.01
Trailer Hitch
Confirmed to Fit
2014 Chevrolet Silverado 3500

6-1/2 Foot Bed

8 Foot Bed

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 67 lbs
In Stock
Draw-Tite Custom Fit Hitch - 41942
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Call etrailer.com at 800-298-8924 for expert service. We are your Chevrolet trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Draw-Tite products for your Chevrolet Silverado 3500 2014. Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part 41942 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.
  • All Info
  • Reviews (3)
  • Q & A (2)
  • Videos (1)
  • Photos
  • Why etrailer?

2014 Chevrolet Silverado 3500 - Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

  • Draw-Tite
  • Class IV
  • 2 Inch Hitch
  • 15000
  • Concealed Cross Tube
  • 1500
  • 15000 lbs WD GTW
  • Custom Fit Hitch
  • 1500 lbs WD TW

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant Chevrolet Silverado 3500 trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 15,000 lbs
      • Maximum GTW when used with weight distribution: 16,000 lbs
    • Maximum tongue weight: 1,500 lbs
      • Maximum TW when used with weight distribution: 1,600 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

41942 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame

Installation Details 41942 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
15,000 lbs.

Tongue Weight (TW):
1,500 lbs.

Weight Distribution Capacity
Gross Towing Weight (GTW):
16,000 lbs.

Tongue Weight (TW):
1,600 lbs.

No drilling required Manufacturer Estimated Installation Time

Tech Tip

Hitch will fit 2WD and 4WD models and vehicles with Heavy Duty Suspension. No drilling required for installation , Installation requires OEM factory bumper and brackets , If equipped with a factory hitch, the factory hitch will need to be removed to install this hitch , Hitch will fit with full size spare tire stowed under vehicle

California residents: click here

Video of Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Trailer Hitch Installation - 2014 Chevrolet Silverado 3500 - Draw-Tite

Today on our 2014 Chevrolet Silverado 3500, we're going to take a look at and also show you how to install the Draw-Tite Ultra Frame Class 4 Trailer Hitch Receiver. This offers the 2 inch by 2 inch receiver tube opening. Its part number is 41942. This is what our hitch is going to look like installed. You can see, mainly hidden cross tube here. You'll be able to see a little bit of it here and there, but it's the back of a truck, it's supposed to have a hitch on it, it's supposed to look nice and beefy.

As you can see we've got our safety chain connection points that are going to come up here. Nice and flat and easy to get to, but you'll see, they're not the largest that you've ever seen. There's a pretty good space between the front edge of that plate and where that opens, so you'll need a pretty wide-throated safety chain connection point. I guess if you we're using smaller ones you could use this point up here, that basically acts as just an access point to be able to get to your installation bolts though. See our receiver tube opening here, it's 2 inches by 2 inches. Really nice, sturdy reinforcement collar, this is going to go all the way around the end of it there.

It's going to give a superior durability. That's what these hitches are made for. This is a Class 4 hitch, it's rated way up there in towing and gross trailer weight ratings. This is going to do the job. We're not going to have to worry about this getting beat up too much or kind of expanding open or anything like that.

We've got a 5/8 diameter hitch pinhole here on the side, it's what we're going to use to secure all of our items with. You won't want to use that smaller hitch pinhole. For the large one, looks like plenty of room there on each side for whatever class, 3, 4 or 5 rated accessory that you would want to use. Just make sure that the weights line up with what you're hauling. So, if you've got a 10,000 pound trailer, make sure you're using a hitch pin that's rated for 10,000 pounds, or above of course. The thing I like about the 2 inch by 2 inch receiver tube opening, is that, we're going to be able to use cargo carriers and bike racks and things like that that are rated for a Class 3.

They're going to fit in there, we'll be able to get them attached. It's not going to limit us to just those heavy duty hauling applications or sometimes, if you got that 2 1/2 by 2 1/2 inch receiver tube opening, you have to put that spacer in there, and it can really be a pain sometimes to get the holes to line up. The smaller pinhole, that's a little bit closer to the rear here, that's for use only with the j-pin stabilization system. Now when it comes to weight ratings, the hitch is going to offer us a 1,500 pound tongue weight ratings. That's the maximum downward force we can put here at the receiver tube opening. It gives us 15,000 pound gross trailer weight rating. That'll be the total weight of our trailer and then anything that we we're to load up on it. We go into a weight distribution set up, the tongue weight rating's going to go up to 1,600 pounds. The gross trailer weight rating, it goes up to 16,000 pounds. However, you want to check the owners manual in the Silverado, see what it's tow ratings are, then you'll go off of whichever of those numbers are the lowest. A couple measurements that are going to helpful when it comes to selecting your ball mounts, bike racks, or hitch cargo carriers, will be from the ground to the inside top edge of our receiver tube opening, we've got about 20 1/4 inches. Then from the center of the hitch pinhole, to the outer most edge of our bumper, it's about 1 1/2. To begin our installation we've got an m-14 bolt right here in the very back of the frame rail that we need to remove. Use a 21 millimeter socket. You may also have an old hitch in place, maybe your old Class 3 hitch is here or something. In that case, you'll remove the other hardware attaching it as well. All right, let's set those aside. Now we're ready to get our hitch raised up into position. We're going to secure it with the rear most hole there in the bumper where we just took that bolt out of. Going to use our m-14 bolt, and a conical tooth washer. Just want to make sure that we have the teeth of that washer facing up towards the hitch. Once we get 3 or 4 good turns on it there, just let it rest there. We'll get the rest of our hardware in place. We're going to do the same style hardware here for our rear attachment points. We'll be using an m-14 and conical tooth washer to the forward attachment points, but we're also going to be incorporating a hex nut, and a flat washer. What we're going to do with these, is bring it down through the opening, through the existing hole, and that's going to go right through the hole in the side plate. Then our conical tooth washer will go on. Then we'll place on that hex nut. This is specific to a long bed application. If you have a short bed application, you're going to need to use the side plates that come with it, and you'll have to use these holes to get it in position. On a short bed, look on your instructions, make sure you get that straight. Now we'll use our 22 millimeter here. We want to go through and start snugging down all of our fasteners. The one in the front, probably going to have to use a socket to poke in on there on the top side. Now for the rearmost locations, you'll have to thread them in most of the way by hand here. You could use a wrench if you wanted to. You want to get enough room so you can slide your socket underneath it, then you can bring your extension right up through there. Now it's time to grab our torque wrench, we want to go around and torque all of our hardware down to the appropriate specifications. All right, if you removed your spare tire, now would be the time to get that put back into position. With everything torqued down properly, that's going to complete our installation of the Draw-Tite Ultra Frame Class 4 Trailer Hitch Receiver with the 2 inch by 2 inch opening. Part number is 41942, on our 2014 Chevrolet Silverado 3500.

Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41942

Average Customer Rating:  5.0 out of 5 stars   (3 Customer Reviews)

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

- 41942
2018 Chevrolet Silverado 2500

Heavy duty receiver. Fast shipping. 597480

- 41942

Delivered on time Mounted up grate grate quality instructions were a little hard to read but a little common sense will figure it out overall grate product 591560

- 41942

Product arrived as promised. Instructions & Installation time were good. Quality on hitch looks great! Product fits and looks great! Have not used the hitch at this point, but with the quality being what it is, there shouldn't be any problems hauling with it. 95847


Ask the Experts about this Draw-Tite Trailer Hitch

Do you have a question about this Trailer Hitch?

  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
David F
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Dustin K
Video Edited:
Jacob T
Video Edited:
Zach D
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.