FITS 2014 Chevrolet Silverado 3500
Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Item # 41938

lowest price pledge

Retail:$338.43

Our Price: $203.95

You Save: $134.48
Trailer Hitch
Confirmed to Fit
2014 Chevrolet Silverado 3500

Cab and Chassis

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping

Shipping Weight: 69 lbs

Quantity: 
In Stock, Ships Today
41938 - Concealed Cross Tube Draw-Tite Custom Fit Hitch
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

Customer Photos


  • Draw-Tite
  • Class IV
  • 2 Inch Hitch
  • 12000 lbs GTW
  • Concealed Cross Tube
  • 1200 lbs TW
  • 15000 lbs WD GTW
  • Custom Fit Hitch
  • 1500 lbs WD TW
Call etrailer.com at 800-298-8924 for expert service. We are your Chevrolet trailer hitch experts, and offer a lowest price guarantee. etrailer.com carries a complete line of Draw-Tite products for your Chevrolet Silverado 3500 2014. Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" part 41938 from Draw-Tite can be ordered online at etrailer.com. Complete trailer hitch installation instructions and technical support.


  • All Info
  • Reviews (9)
  • Q & A (15)
  • Photos
  • Why etrailer?

2014 Chevrolet Silverado 3500 - Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant Chevrolet Silverado 3500 trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class IV
    • Maximum gross trailer weight: 12,000 lbs
      • Maximum GTW when used with weight distribution: 15,000 lbs
    • Maximum tongue weight: 1,200 lbs
      • Maximum TW when used with weight distribution: 1,500 lbs
  • Limited lifetime warranty


NOTE: Vehicle's must have 34" spacing and a minimum of 19" from the end of the frame rail to the spring shackle bracket.


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



41938 Draw-Tite Class 4 Trailer Hitch Receiver - Ultra Frame



41938 Installation InstructionsInstallation Details 41938 Installation instructions
Weight Carrying Capacity
Gross Towing Weight (GTW):
12,000 lbs.

Tongue Weight (TW):
1,200 lbs.


Weight Distribution Capacity
Gross Towing Weight (GTW):
15,000 lbs.

Tongue Weight (TW):
1,500 lbs.



Manufacturer Estimated Installation Time

Tech Tip

Drilling required for installation , Requires a minimum of 19" from end of frame rail to spring shackle bracket , Spare tire repositioning and/or modification of spare tire carrier may be required , Product fits vehicles with frame that is 34" wide outside to outside




California residents: click here



Customer Reviews

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41938

Average Customer Rating:  4.1 out of 5 stars   (9 Customer Reviews)

Specially designed to meet your heavy-duty towing needs, this fully welded, corrosion-resistant vehicle trailer hitch receiver features Draw-Tite's Tested Tough guarantee, ensuring performance that exceeds industry standards.

- 41938
by:

Great Heavy Duty Hitch, Perfect Fit 662694



- 41938
by:
Chevrolet

Just put this on my 1972 chevy c20, some people had said it didn’t line up, that the assembly was too narrow, this isn’t true, all you have to do is slot the first hole closest to the tailgate on the frame inward, you do have to drill all new holes, but even if the assembly was a little wider they wouldn’t line up anyway, not sure why people are up set about drilling new holes, says right on the ad that you must drill anyway, took about an hour start to finish, very pleased, this thing is heavy duty! 602413



- 41938
by:
1973 Chevrolet C/K Series Pickup

Except for the "cardboard" packaging, which was torn up pretty bad, the receiver hitch got here in great condition, with NO missing parts. This hitch is more then what I was counting on. This thing is so "beefy" that the frame of the truck would bend before the hitch wound. If anyone wants a beefy hitch, then this is it. Buy it! 600609



- 41938
by:

Nice heavy built hitch. Fast shipping. Only problem I have is how it was shipped. Was put in cardboard box which couldn't support the weight or akwardness of the hitch. Box was mostly destroyed when I I received it and the heavy staples holding box together had put a lot of deep scratches on the new powdercoat paint of the hitch. I think they should ship with either heavy shrink wrap instead of box. 440148



- 41938
by:
1978 GMC C/K Series Pickup

Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 41938 On a 1978 GMC K2500 8' pickup truck, this was not a simple bolt-on. Cutting, drilling and grinding was necessary. This hitch is made very heavy and very well. Includes 5/8" fine thread mounting bolts. 374322



- 41938
by:
1988 Chevrolet C/K Series Pickup

Excellent quality and strength. Why skimp on something as important as your hitch? I have purchased three of these Draw Tites - I guess a repeat customer will scream about the true quality a company can garner from repeat customers. When you pull show cars worth six figures, you can't afford a poorly made hitch. Step up, step out, and don't fret what you are pulling. 369181



- 41938
by:
1972 Chevrolet C/K Series Pickup

Product was packaged right. shipped fast. The welds look real good and the hitch is very heavy ! I got free shipping on what looks like a great product. Can't wait to install this on my freshly built 1972 Chevy lwb. A great addition to ole blue 328909



- 41938
by:
1993 Chevrolet C/K Series Pickup

This fit perfectly and securely on my 1993 C3500HD dump. I had no issues installing it, aside from drilling through the 1/4" steel frame on the truck but that is to be expected. Fast shipping and great customer service. 249928



- 41938
by:
Ford Edge

This is a great hitch, but the application and fit for my 1971 Chevrolet k20 is very poor. The installation instructions say that the hitch is for a 34" frame, which mine is, but the hitch is not 34" wide to match the frame, it is 33 5/16", narrower by almost 3/4". Because my frame necks down in the rear and the width of the hitch combines to put the rear holes to within a 1/4" of the inside edge of the frame. Not a great idea! 201600


10
10

Ask the Experts about this Draw-Tite Trailer Hitch

Do you have a question about this Trailer Hitch?


  • Will Draw-Tite Trailer Hitch, # 41938 Fit a 1986 Chevy K Series Pickup Truck
  • On the Draw-Tite Trailer Hitch, # 41938, the 8 bolts used to attach the hitch each go into the frame rails on the truck. When I spoke with my contact at Draw-Tite he gave a much more clear description of what you will need for this hitch to mount to your truck. Basically, the hitch is 19 inches long. If you measure from the end of the frame rails at the rear of the truck towards the front, you will need at least 19 inches with nothing in the way in order for the hitch to fit. I have...
    view full answer...

  • Trailer Hitch Recommendation for a 2016 Chevrolet Silverado 3500 HD Truck
  • I can help you find a hitch that will fit your 34 inch outside to outside measurement on your 2016 Chevy 3500 HD. It sounds like you have a Cab and Chassis style Chevy, because of the 34 inch wide outside to outside frame. I have listed the trailer hitches below that will fit your vehicle, but the Reese RP45302 is not one of them. I also included a link on this page to take you directly to the page of the 5 hitches that will fit your vehicle for your convenience. 2 inch receiver...
    view full answer...

  • Fit of Draw-Tite Class III Hitch # 41938 on 2003 GMC Cab/Chassis with Service Body
  • It is very difficult to provide a definite yes or no answer about hitch fit when a service body is involved. I can provide you with some measurements and parameters that would allow you to take some measurements from your truck and determine if the hitch will fit. First of all, your frame must measure 34 inches, outside to outside distance. If you measure from the rear of the frame member toward the front of the vehicle, you must have at least 19 inches of open and unobstructed frame...
    view full answer...

  • Does Spare Tire Have To Be Relocated When Installing Hitch On 1998 Chevrolet C/K Pickup
  • I checked out the installation instructions for both of the trailer hitches you referenced for your 1998 Chevrolet CK pickup truck. Both of the hitch instructions do mention the spare tire. For the Draw-Tite Trailer Hitch, part # 41938 the instructions say that you need to remove the spare tire and carrier from the vehicle. If the under-box tire storage is to be retained, the spare tire carrier will have to be relocated and/or modified after receiver is installed. For the Curt Trailer...
    view full answer...

  • Trailer Hitch Recommendation for a 2002 GMC Sierra 2500 HD with 8ft Royal Utility Bed
  • Since you are looking for a heavy-duty trailer hitch, you may be able to use the Curt Class V XD Trailer Hitch, # C15313. This hitch was designed to fit the 2002 GMC Sierra 2500 HD pickup trucks with a frame width of 39 inches. The receiver will sit 5-1/2 inches below the frame, so it should also clear your bumper. I have attached a diagram showing different measurements of this hitch for you to check out. If your truck came with the utility bed from the factory, you may want to check...
    view full answer...

  • Mounting Hole Measurement Side to Side on Center for Draw-Tite Class IV # 41938
  • The Draw-Tite Ultra Frame Trailer Hitch Receiver # 41938 has a center to center measurement of 30-7/8 inches for the bolt holes from side to side. I've attached a photo to assist.
    view full answer...

  • Draw-Tite Trailer Hitch 41922 Compatibility with a 1999 Ford F-350 Quad Cab 8 Ft Bed
  • For your 1999 Ford F-350 Super Duty, I would actually recommend you get a Draw-Tite Trailer Hitch, part # 41922. This hitch is designed to specifically work on your vehicle, and would allow you to keep your spare tire. I attached installation instructions for this product below for you to check out also. Ultra Frame Trailer Hitch Receiver by Draw-Tite, part # 41938, that you referenced is designed for trucks that are cab and chassis models without truck beds. Since your truck has an...
    view full answer...

  • Trailer Hitch Receiver for 1994 Chevy K3500 Dually with Flatbed
  • For your 1994 Chevy K 3500 with a flatbed, the cab and chassis hitch options won't be the correct fit because the frames have different widths. Since you don't want the hitch to stick out as far as the confirmed fit custom hitches due to the lack of a rear bumper you won't be able to avoid some level of customization with the installation. My recommendation is the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07. This will require welding...
    view full answer...

  • Recommend Universal Weld On Trailer Hitch Receiver for A 1978 Winnebago Itasca
  • The Draw-Tite Ultra Frame Trailer Hitch Receiver part # 41938 is a custom fit class IV trailer hitch receiver. Unfortunately, I cannot recommend you weld and or make any adjustments/alterations to the trailer hitch receiver or it's intended installation. I went out to our warehouse for you and the distance between the first and last bolt hole is approximately 16-3/4" on center. Yes, for proper usage, it is required to use all of the mounting holes located on the hitch receiver. The Draw-Tite...
    view full answer...

  • Interference with Spare Tire When Installing Draw-Tite Class V Receiver on 1974 Chevy Pick Up
  • I have looked at the instructions for the Draw-Tite Ultra Frame Receiver hitch, which state that the spare tire carrier will need to be relocated or modified to prevent the spare tire from interfering with the hitch. I will provide a link to the instructions below.
    view full answer...

  • Recommended Trailer Hitch Receiver for 1975 GMC C25 Sierra Grande
  • Since the Draw-Tite Ultra Frame Class IV Trailer Hitch Receiver # 41938 isn't a fit for your 1975 GMC C25 because of the spacing, the best bet is to look another hitch. The Draw-Tite Ultra Frame Class V # 41947 is a confirmed fit and also has a 2 inch hitch receiver opening. It also has a maximum GTW of 15,000 pounds. Another option is the B&W Heavy-Duty Class V # BWHDRH25122 which has a GTW of 16,000 pounds. I've attached an install video of this hitch on a 1986 Chevy just to give...
    view full answer...

  • Trailer Hitch for a 2007 Chevy Silverado New Body Style with Roll Pan Bumper and Regency RST Trim
  • I have a potential solution for you but none of the hitches for the 2007 Chevy Silverado (New Body style) are designed for models with a roll pan bumper. Installation of a hitch such as # 14301 will likely require a little trimming of the roll pan. If you are willing to make those modifications then this will work. Otherwise you will need to look at weld-on hitches such as # 41990-07 or # 41990-16 in order to drop the receiver low enough to avoid having to trim the roll pan bumper....
    view full answer...

  • Recommended Trailer Hitch For 2006 Monaco Motorhome
  • The Draw-Tite Ultra Frame Trailer Hitch Receiver, part # 41938 you referenced is not designed for a motorhome, but we do have a solution for you. I recommend a trailer hitch like part # 13703. This is designed for motorhomes that have frame width between 22 and 72 inches. This trailer hitch can be installed by drilling into the motorhome frame or it can be welded in place by a certified professional welder. The trailer hitch has a 2 inch receiver opening and has a weight rating of...
    view full answer...

  • Trailer Hitch Recommendation for a 1978 Chevy K20 * Foot Bed with Standard Bumper
  • Draw-Tite trailer hitch # 41938 will fit your 1978 Chevy K20 if it has the standard factory bumper and it the distance from the end of the frame to the leaf spring shackle bracket is 19 inches or more so since yours are at 14 and 18-1/2 this hitch will not fit. You can instead use Ultra Frame Trailer Hitch Receiver - Custom Fit - Class V - 2" Item # 41947. I have linked the installation instructions for you. I also recommend etrailer.com Ball Mount Kit - 3" Rise or 4" Drop - 16,000 lbs...
    view full answer...

  • Trailer Hitch, Ball Mount, Ball, and Wiring Recommendations for a 2006 Toyota Tacoma
  • We do have several trailer hitch available for the 2006 Toyota Tacoma, but # 41938 will not fit. For your truck, I recommend the Draw-Tite Trailer Hitch, # 75236. I have included a link to the installation details and a video showing a typical installation for you to view. The recommended ball mount is # 2923, and you can use pin and clip # PC3. For a ball, you can use # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For Trailer wiring, use...
    view full answer...


Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:

  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Expert Research:
Michael L
Expert Research:
Michael H
Expert Research:
John H
Expert Research:
Jeffrey L
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Alexander C
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.