To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.6 out of 5 stars (29 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.The hitch came right on time. It is substantial as they say. I had a body shop install it for me as removing the back bumper cover was beyond my pay grade. I like the way it is hidden except for the 2 x2 receiver. some of the hitches from the trailer rental place I see around town are ridiculous they way they hang down.
Melodie C.
6/12/2023
Hi Dave, Do you remember how long it took for the install? Trying to guesstimate labor costs $$$. TY
Had this Curt installed on my 2020 X3 x drive about a year ago by a local body shop. I have used it for my bike rack and also have a carrier tray. Quality of the powder coat is very good, with no signs of rust after a year. The powdercoat seems better than the Draw Tite hitch that I had on my MDX. Overall very satisfied with this purchase.
Christopher
7/26/2023
After a year of occasional use, the hitch is in very good condition. A bit of rust inside the receiver. Overall the powder coat is still in great shape.
Purchased this for a 2018 X3 and had it installed by a BMW Certified shop costing $834 for 6 hours of labor.
Unfortunately, now the exhaust does not hang correctly causing the exhaust tips not being centered within the cutouts. The installation shop referred me to an exhaust specialist to solve it which will likely run another $150-$250.
Otherwise the hitch looks as expected.
I have a 2022 X3. My mechanic who installed the Curt #13387 Hitch indeed followed the directions and the end result was the left tailpipe hung 1/2" lower than the right one. In hindsight I would have purchased the more expensive Drawtite hitch as it seems to be designed to hang the exhaust from the existing hardware in the car. Otherwise the hitch seems to be OK.
Jenny N.
1/17/2022
I checked and the Draw Tite hitch part # 76226 has a very similar install. When we finished the installation on a 2019 BMW X3 on this hitch you can see at mark 11:11 that the exhaust pipes were even.
Helpful Links
Hitch is high quality and came with complete installation instructions. I use it for a bike rack and it will also work well for pulling a trailer.
Kurt
5/11/2022
Still performing great. I recommend this hitch
As other said, this is NOT an easy install. I have installed 3 other hitches (two BMW, one Audi) and while it takes time, it is not especially difficult. However, this Curt hitch has some strange design flaws. You have to use an angle grinder or torch to cut off and drill out a welded on bolt, which is really difficult. And it is seemingly needless...the Draw Tite hitch for this car (x3) did not require this. To make matters worse, when you finally get the bolt off and get everything installed, the exhaust system is shifted about an inch to the passenger side, and is very obvious (see previous reviews for a picture). It bugged me so much that I redid the entire thing the next day (another 2 hours) just to modify the rubber-coated steel exhaust hanger bushing...not easy. And then when i reassembled, it is still offset about 1/2" to the right. I really have no idea why Curt would make you relocate the exhaust hanger, and not realize it also causes misalignment. The Draw Tite 76226 does not so go with that product if you are choosing.
You're not going to post this one. Installation was VERY difficult. Instructions were miss leading. Installation required drilling out a welded-in stud in the car's bumper (not mentioned in instructions). Re-hanging the car's muffler on the hitch's stud was a bear of an operation. A small design change would fix both of these problems.
BTW: This is the third Curt hitch I've installed. The others were easy.
There is a lot to do to install this hitch. The one thing that isn't mentioned is that, on the driver's side muffler hanger, you need an acetylene torch to remove the bolt from the bumper frame. It's welded in place, so won't come out with a hammer. Also, it would have been helpful to know that, because of positioning, the bumper frame and hitch need to be mated to the passenger side muffler hanger, and that prior to trying this, the passenger side hanger needs to be removed from the current hanger post.
Luckily, with trial and error, I found these out, it's installed and I don't have to do it again.
nicely made, sturdy design, good welds and finish. Have not installed it yet,
waiting for warmer weather and my experience with items I purchased from you before I don’t expect any problems.
F.Y.I. I fill the cross tube with expandable foam out of a can. Prevents rusting from the inside out, have used this method for years and it works.
Gunter
3/8/2021
Great solid hitch, pulling a 5000 Lbs. boat for a 250 mile trip a few times a year. Also use it to carry 4 bikes on a bike rack that goes into the receiver, nice and very solid very little deflection with 4 bikes on it. No problems with the installation followed the instructions
As usual, etrailer comes through again! They never fail me, always great service and ALWAYS the best prices and options in the industry! I’ve been a hitch man since 1980 and this is the best place to do business!
Great customer service, delivery took a little longer than I expected but I was able to speak with an agent who gave me an update. I am taking my hitch to get installed very excited.
It's been a year and the product is holding up well, excellent quality. We had it installed by our mechanics and have a bike rack on it (which stays on all the time). Really happy with it.
This tow hitch was perfect for my X3 BMW. Easy to install. The video showing/explaining the installation was especiallyhelpful. Thank you Curtis
I am very happy with my Rhino rack. Easy to mount, solid and looks great.
Hitch and cover were easily installed and work fine.
Packaged well, arrived on time, great service and exactly what I needed. Installed it on a BMW X3.
Continues to perform well, no issues wh atsoever
Perfect
Excellent hitch for the $$. I work for a BMW Dealer. BMWNA should wake up. Why pay $[xxxx]?
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dave
7/4/2020
Perfect